C/O Tribal Bhawan Nurpur in Tehsil Nurpur Distt. Kangra H.P.

Amount

Excavation in foundation, trenches etcetera in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work . jumper blasting work , soft and hard blasting and doing work in saturated soil conditions unto any depth and lift including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation as directed by the Engineer-in-charge and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed within all leads and lifts disposed materials to be leveled neatly dressed as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges.

Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work , soft and hard blasting or any other mixed classification of soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing and pumping out water ( surface and sub soil water ) upto any depth or any quantum of water including cleaning of slush which may arise out during dewatering including dressing of sides and bed and disposing of all excavated earth in all leads and lifts then disposing of all surplus unserviceable excavated earth upto any leads and lifts and disposed materials to be leveled and neatly dressed as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges

Filling in plinth with sand under floor including watering, ramming ,consolidating and dressing complete as per HP.PWD. specifications or as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Boulder filling tightly hand packed with hard stone under floor complete as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depths below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetera . and mass concrete including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights / depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetera upto any thickness upto all floor level including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frames 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides of soffits of beams, beams haunchings, cantilevers, bressumers and lintels upto any depth / thickness upto all floor level including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plan) in any heights / thickness/depths etcetera upto all foor level including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (Circular or curved in plan) in any heights / thickness/depths etcetera upto all foor level including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing upto all floor level including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width etcetera upto all floor level including carriage of materials within all leads and lifts and other incidental.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like etcetera upto all floor level including carriage of materials within all leads and lifts and other incidental.

Random rubble masonry/ polygonal / rubble masonry ( un coursed / brought to courses ) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 ( one cement: six sand : twelve graded stone aggregate 20mm ( twenty millimeters ) nominal size at plinth level in cement mortar 1:6 ( one cement: six sand) and curing complete in all floors including carriage of materials within all leads and lifts and other incidental as per approved drawings , design, and as per direction of Engineer in charge.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement; six sand : twelve graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads and lifts and other incidentals charges as per approved drawing , design, and as directed by Engineer in charge.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement; four sand : eight graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads and lifts and other incidentals charges as per approved drawing ,design, and as directed by Engineer in charge.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement; four sand : eight graded broken /crushed stone aggregate 20mm(twenty millimeters) nominal size and curing complete excluding the cost of form work in depressed slab in all depths including carriage of materials within all leads and lifts and other incidentals charges as per approved drawing ,design, and as directed by Engineer in charge.

Providing and laying cement concrete 1:5:10 ( one cement; five sand; ten graded stone aggregate 40mm ( forty millimeter ) nominal size ) and curing complete excluding cost of form work in foundation and plinth in all depth as per drawings and HP.PWD. technical specifications and as per entire satisfaction and as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rates including octroi, royality, malkana, toll tax , sale tax or any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete inter locking paver blocks 80mm (eighty millimeter ) thick block vibro compacted upto M-50 (M-fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (twenty five millimeter) thick average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (sub-base concrete floor to be paid for separately) as per entire satisfaction and as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rates including octroi, royalty, malkana, toll tax , sale tax or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete work grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic meter mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation , footings, bases of columns, and the like and mass concrete including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, and as directed by Engineer in charge.

Providing and laying reinforced cement concrete work grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic metre mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, lintels girders, bressumers and cantilevers in all depths/ thickness etcetera up to all floor level including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, and as directed by Engineer in charge.

Providing and laying reinforced cement concrete work grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic metre mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness up to all floor level including carriage of material within all leads and lifts other incidental charges as per approved drawings , design, and as directed by Engineer in charge.

Providing and laying reinforced cement concrete work grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic metre mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair cases ( except spiral stair cases) excluding landing but including preparing of top surfaces and finishing of nosing upto all floor level including carriage of materials within all leads and lifts other incidental charges as per approved drawings , design, and as directed by Engineer in charge.

Providing and laying reinforced cement concrete work grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic metre mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls (any thickness but not less than 0.10 mtr.(Zero point one zero meter) including attached pilasters buttresses, , plinth and string courses etceteras from top of foundation upto all floor level including carriage of material within all leads and lifts other incidental charges .

Providing and laying cement reinforced concrete work grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic metre and mechanically mixed and vibrated to give smooth and even surfaces including centering shuttering etcetera but excluding cost of reinforcement in mouldings as in cornics, window sills etcetera) in all girth as per approved drawing and design and curing complete upto all floors including carriage of materials within all leads and lifts and other incidental

Providing and laying cement reinforced concrete work grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic metre and mechanically mixed and vibrated to give smooth and even surfaces including centering shuttering etcetera but excluding cost of reinforcement in mouldings as in cornics, window sills etcetera) in all girth as per approved drawing and design and curing complete upto all floors including carriage of materials within all leads and lifts and other incidental

Providing and laying cement concrete 1:2: 4 (one cement; two sand : four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size mixed and vibrated mechanically so as to give a compressive strength corresponding to grade M-20(M-twenty) in string courses , coping , bed plates, anchor blocks plain window sills and the like including form work and curing complete upto all floor level including carriage of materials within all leads and lifts and other incidental.

Providing and laying mild/ tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all heights including cost of binding wire and other incidentals due for its completion for all floors including carriage of materials within all leads and lifts and other incidentials.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6(one cement: six sand) and curing complete including carriage of materials within all leads and lifts and other incidental.

Providing and laying damp proof course 100mm ( one hundred millimeters ) thick with cement concrete 1:2: 4 (one cement; two sand four graded /crushed stone aggregate 12.5mm (twelve point five millimeter) nominal size) including the form work and curing complete including carriage of materials within all leads and lifts and other incidental charges as per approved drawings , design, and as directed by Engineer in charge.

Applying a coat of hot bitumen (mexphalt 80/100 ( eighty/ one hundred ) or equivalent) using 1.70 Kg(one point seven zero)Kilogramme. per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked in kerosene oil complete including carriage of material with in all leads and lifts and other incidential as per approved drawings , design, and as directed by Engineer in charge.

Brick work using Second class common burnt clay buildings bricks in cement mortor 1 : 6 (one cement isto six sand) in foundation and plinth and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Brick masonry using second class common burnt clay building bricks in super structure above plinth level in all heights / floor level in cement mortar 1;6( one cement; six sand)and curing complete including carriage of materials within all leads and lifts and other incidental charges and as per direction of Engineer in charge .

Brick masonry using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:4( one cement; four sand)and curing complete including carriage of materials within all leads and lifts and other incidental charges and as per direction of Engineer in charge .

Half brick masonry using Second class common burnt clay building bricks in super structure above plinth level upto all heights / floor level in cement mortar 1:4 (One Cement : four sand ) and curing complete including carriage of materials within all leads and lifts and other incidental charges and as per direction of Engineer in charge.

Providing and laying pre-cast cement concrete hollow block masonry with cement concrete block of size 40cm x 19 cm x 20 cm(forty centimeter into nineteen centimeter into twenty centimeter) including quoin block jamb block and closers etc. made of cement concrete 1: 3:6 ( one cement: three sand : six graded stone aggregate 20mm(twenty milimetre) nominal size )laid with cement mortar 1:6 ( one cement: six sand) in super structures upto all floor level and curing complete including carriage of materials within all leads and lifts and other incidental.

Half brick masonry using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (one cement : four sand) and curing complete including carriage of materials with in all leads and lifts and other incidental charges.

Providing and fixing angle iron door frame single rebate manufactured from Mild steel angle iron section 35x35x4 mm ( thirty five into thirty five into four millimeters and Mild steel flat 50x4 mm (fifty into four millimeter ) in combination welded together to make one frame as per drawing design including hings jambs lock jambbeed and if required angle thrashed of mild steel angle 50x25 mm ( fifty into twenty five millimeters ) welded or rigidly fixed by mechanical means lugs with split end tails to each jamb including steel butt hings 2.5 mm ( two point five millimeters ) thick with provision of locking arrangement and shock absorvers as specified and applying a coat of approved steel primer after pretreatment of the surfaces as directed by Engineer-in-charge up to all heights / floor level including carriage of materials within all leads, lifts and other incidentals and as directed by Engineer in-charge.

Providing and fixing steel glazed doors, windows and clerestory windows and ventilators of standard rolled steel section joints, mittred and welded with 16x3.15mm (sixteen into three point one five millimeters)lugs 10 cm.(ten centimeters) long embedded in cement concrete blocks 15x10x10cm( fifteen into ten into ten centimeters ) size of 1: 3 : 6 ( one cement: three sand: six crushed graded, stone aggregate 20mm (twenty millimeters) nominal size or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings such as handles , tower bolts etcetera including providing and fixing of glass panes 4mm (four millimeter) thick with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paint as per drawing and design or as per directions of Engineer- in-charge and carriage of materials with in all leads and lifts (I ) Side hung windows.

Providing and fixing steel glazed doors, windows and clerestory windows and ventilators of standard rolled steel section joints, mitred and welded with 16x3.15mm (sixteen into three point one five millimeters)lugs 10 cm.(ten centimeters) long embedded in cement concrete blocks 15x10x10cm( fifteen into ten into ten centimeters ) size of 1: 3 : 6 ( one cement: three sand: six crushed/ graded, stone aggregate 20mm (twenty millimeters) nominal size or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings such as handles , tower bolts etcetera including providing and fixing of glass panes 4mm (four millimeter) thick with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paint as per drawing and design or as per directions of Engineer- in-charge and carriage of materials with in all leads and lifts( I ) Fixed steel windows.

Providing and fixing steel glazed doors, windows and clerestory windows and ventilators of standard rolled steel section joints mitred and welded with 16x3.15mm (sixteen into three point one five millimeters)lugs 10 cm.(ten centimeters) long embedded in cement concrete blocks 15x10x10cm( fifteen into ten into ten centimeters ) size of 1: 3 : 6 ( one cement: three sand: six crushed/ graded, broken stone aggregate 20mm (twenty millimeters nominal size ) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings such as handles , tower bolts etcetera including providing and fixing of glass panes 4mm (four millimeters ) thick with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paint as per drawing and design or as per directions of Engineer- in-charge and carriage of materials with in all leads and lifts Top hung ventilators

Providing and fixing 40mm(forty millimeters) thick second class deodar wood wire gauge shutters using galvanized Mild steel wire gauge of I.S. gauge designation 85-G ( eighty five-G )with wire of diameter 0.56mm (zero point five six millimeters)for doors, windows, and clerestory windows including bright finished / black enamelled iron butt hinges with necessary screws including carriage of material with in all leads and lifts and other incidental charges and as directed by the Engineer in charge.

Providing and fixing 19mm (nineteen millimeters) thick water proof termite resistant commercial board shutter for cup boards /S.D.B. with 6mm ( six millimeters ) thick hard wood edging and A.C. sheet lining on inner side of shutter including fixing with nickel plated piano hings with necessary screws and carriage of material with in all leads and lifts and other incidental charges and as directed by the Engineer in charge.

Providing and fixing glazing with glass panes of 5.5mm (five point five millimeters ) thickness (weight not less than 13.75 kg/ sqm. ( thirteen point seven five kilogramme per square meter ) in fire fighting door with putty and nails etcetera complete in all floor level as per directions of Engineer-in- charge including carriage of materials with in all lead and lifts and other incidental charges.

Providing and fixing glazing with glass panes 4mm (four millimeters ) thickness weight not less than 10.00 kg/ sqm. ( ten kilogramme per square meter) in dormor windows with putty and nails etcetera complete in all floor level as per directions of Engineer-in- charge including carriage of materials with in all lead and lifts and other incidental charges.

Providing and fixing 12mm ( twelve millimeters) thick prelaminated board both side bwp phenol bonded exterior / interior grade panelled shutter with 40mm ( forty millimeters ) thick frame of first class deodar wood for doors including bright finished black enamelled iron butt hinges with necessary screws upto all floor level including carriage of materials within all leads and lifts.

Providing and fixing 8mm ( eight millimeters) thick cement bonded particle board with 40mm ( forty millimeters ) thick second class deodar wood for toilet Door including bright finished black enamelled iron butt hinges with necessary screws etcetera upto all floor level ( frame work to be measured and paid for separately ) including carriage of materials within all leads and lifts.

Providing and fixing Cup board/ Cabinet work made of 19mm ( nineteen millimeter ) water proof termite resistant commercial board ( Uniply/ Green ply or its equivalent ) shutters , box including selves, vertical partitions, and back side of cup board / cabinet of 8mm ( eight millimeters ) thick commercial ply all cut portion of shelves shall be finished with 6mm ( six millimeters ) hard wood edging including fixing with nails and screws etcetera complete The out side portion of shutter shall be finished with 1 mm (one millimeters ) thick lamination of approved shade including carriage of materials within all leads, lifts and other incidental charges and as directed by the Engineer in charge.

Providing and fixing magnetic catcher for cupboard shutters in all heights / floor level with necessary screws and butt hinges including carriage of materials within all leads and lifts.

Providing and fixing 65x35mm (Sixty five into thirty five milimetres) size special quality bright finished brass cup board locks or ward rob lock with six leavers including necessary screws complete in all respect ,including carriage of materials in all leads and lifts and other incidental.

Providing and fixing anodized aluminium sliding doors bolts,(anodized transparent or dyed to required colour and shade with bolts and nuts/screws etc. complete including carriage of materials with in all leads and lifts 300 x 16mm (three hundred into sixteen)millimeter.

Providing and fixing anodized aluminium tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with screws etcetera complete including carriage of materials within all leads and lifts:- i) 200x10mm ( two hundred into ten millimeters ).

Providing and fixing anodized aluminium tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with screws etcetera complete including carriage of materials within all leads and lifts :- )150x10 ( one hundred fifty into ten millimeters ).

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of materials within all leads and lifts.(i) 125mm (one hundred twenty five millimeters)

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of materials within all leads and lifts. (i) 100mm (one hundred millimeters)

Providing and fixing bright finished hard drawn hooks and eayes of approved colour and shade with necessary screws etcetera complete including carriage of materials within all leads and lifts. i) 250mm (two hundred fifty millimeters)

Providing and fixing 125mm (one hundred twenty five millimeters) oxidized M.S. double acting spring hinges with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any taxes imposed by the Government

Providing and fixing 12mm( twelve millimeter )thick and 150mm(one hundred fifty millimeter )wide first class deodar wood pelmet with 25mm(twenty five millimeter) dia meter wooden curtain rods and brackets including fixing 25x3mm(twenty five into three millimeter) Mild Steel flat 10 cm (ten centimeter ) long and plugs etc. complete with necessary screws including carriage of materials within all leads and lifts

Providing and fixing Mild Steel plain grills of required pattern in wooden/ steel iron frames of windows etcetera with Mild steel flats square or round bars with round headed bolts and nuts or by screws including welding with frame complete in all respect including carriage of materials in all leads and lifts and as directed by the Engineer in charge.

Providing and fixing Mild Steel Ornamental grills of required pattern in wooden/ steel frames of windows etc. with Mild steel flat square or round bars with round headed bolts and nuts or by screws including welding with frame complete in all respect including carriage of materials in all leads and lifts and as directed by the Engineer in charge.

Providing and fixing railing for stair cases having baluster 19mmx19mm and 12mmx12mm ( ninety millimeter into ninety millimeter and twelve millimeter into twelve millimeter) Mild steel solid square bars in combination with Mild steel flat 40x6mm (Forty into six millimeter) with a clear height of 85cm (eighty five centimeter )at the rate 60cm (sixty centimeter ) centre to centre , embedded in cement concrete steps and jointing with electrical gas welding at top along with hand rail of hard wood 75x60mm ( seventy five into sixty millimeters ) Vertical, baluster welded/ jointed with 2 Nos. (two numbers ) M.S flat of 40x6mm (forty into six millimeter) complete with a priming coat of read paint as per specification and direction of the Engineer-in-Charge. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer in-charge

Providing and fixing mild steel railing for ramp with 50mm ( fifty millimeters dia meter mild steel hollow pipe hand rail slip resistant with round ends at two level of 75 cm and 90 cm ( seventy five centimeter and ninety centimeters ) height and extended 30 cm ( thirty centimeter ) beyond the top and bottom of railing with 25mm ( twenty five millimeters ) dia meter mild steel baluster embedded in cement concrete steps at 60 cm )(sixty centimeter) centre to centre and jointed with electric gas welding at top alongwith hand rails of mild steel hollow pipe of of 50mm ( fifty millimeters ) diameter. The baluster welded / jointed with each other with two numbers mild steel flat 40x6mm ( forty into six millimeters ) complete and applying a priming coat of red lead paint as per HPPWD specifications or as directed by Engineer-in-charge including and carriage of materials in all leads and lifts.

Providing and fixing 6mm ( six millimeters ) thick cement bonded particles board with exposed pre-painted sheet profiles of NCL Secedor Ltd. Or equivalent ceiling of approved quality on angle iron /t-section frame with butt jointing and nails in all heights / floor level ( frame work and cover fillets to be measured and paid separately ) including carriage of materials with in all leads and lifts

Providing and laying 25 mm (twenty five millimeter ) thick mirror polished 55x55 cm ( fifty five into fifty five centimeter ) Kota stone slab flooring with Jaislmer yellow band 7.5 cm (seven point five centimeter ) 20 mm (twenty millimeter ) (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete upto all floor level or as per directions of Engineer in charge including carriage of materials within all leads and lifts and other incidental and as directed by the Engineer in-charge.

Providing and laying 300 x 300 x20 mm( three hundred into three hundred millimeters into twenty millimeter) thick vibro hydraulic compressed and polished precast terrazzo tiles of ISI marked number IS No. 1237 of NTC or its equivalent in 60% (sixty percent) white and 40% (forty percent) grey cement The ratio of chips shall be 55% (fifty five percent) white chips, 15% (fifteen percent ) of each Mahroon, yellow and dark green , having chips size 0.B and 2B laid in floor, treads of steps and landings on a bed of 25mm (twenty five millimeter) average thickness of cement mortar 1 : 6 (one cement : six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing completed with tiles of Silver Grey shade upto all floor level as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Malkhana, Royality Octroi, toll tax or any taxes imposed by the Government

Providing and laying 300 x 300 x20 mm( three hundred into three hundred millimeters into twenty millimeter) thick vibro hydraulically compressed and polished precast terrazzo tiles of ISI marked number IS No. 1237 of NTC or its equivalent in 60% (sixty percent) white and 40% (forty percent) grey cement The ratio of chips shall be 55% (fifty five percent) white chips, 15% ( fifteen percent ) of each Mahroon, yellow and dark green , having chips size 0.B.2B laid in skirting, risers of steps and dado upto any height on 10mm (ten millimeter) average thickness of cement plaster 1 : 3 (one cement : three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing completed with tiles of Silver Grey shade upto all floor level as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate inclusive of Malkhana, Royality Octroi, toll tax or any taxes imposed by the Government

White glazed tiles 6mm (six millimeters) thick of orient-Bell/ Kajaria/ Rak or its equivalent in skirting, risers of steps and dado for all heights on 12mm (twelve millimeter) thick cement mortar 1:3 ( one cement; three sand) and jointed with white cement slurry complete upto all floor level including carriage of materials within all leads and lifts and other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge

Providing and laying spartic ceramic tiles (non slippery ) of Kajaria. nitco / orient-Bell/ Rak or its equivalent of size 300 x 300 mm ( three hundred into three hundred millimeters ) and 5.5mm ( five point five millimeters ) thick in flooring treads of steps laid on a bed of 12mm ( twelve millimeters ) thick cement mortar 1:3 ( one cement : three sand ) finished with flush pointing in white cement complete in all heights / floor level including carriage of material within all leads and lifts and other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge.

Providing and laying 40mm(forty millimeters) thick Cement concrete flooring 1:2:4 (one cement; two sand; four graded broken/ crushed stone aggregate 20mm (twenty millimeters) nominal size ) laid in one layer finished with a floating coat of neat cement upto all floor level and curing complete including carriage of materials with in all leads and lift other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge.

Providing and laying red sand stone slab flooring laid over 40 mm ( forty millimeters )average thick on 20mm (twenty millimeters ) thick base of cement mortar 1:4 ( 1 cement : 4 sand ) and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete upto all floor level including carriage of materials in all leads and lifts and other incidental charges and as per approved drawings/ design and as directed by the Engineer in charge.

Providing and laying 20mm (twenty millimeters) thick Baroda green shade marble work (table rubbed and polished) in flooring laid over 20mm (twenty millimeters) thick base in cement mortar 1:3 (one cement is to three sand) including jointing with cement mortar 1:2 (one cement is to two marble dust) with an admixture of pigment to match the shade of marble complete as per HPPWD specifications as per approved drawing and design or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Kota stone slab 25mm ( twenty five millimeter) thick in risers of steps ,skirting dado and pillar laid on 12mm ( twelve millimeter) (average)thick cement mortar 1:3 (1cement :3 sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete upto all floor level including carriage of material within all leads and lifts and other incidental and as directed by the Engineer in-charge

Providing and laying heavy duty precast cement concrete inter locking paver blocks 60mm (sixty millimeter ) thick vibro compacted upto M-50 (M-fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (twenty five millimeter) thick average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (sub-base concrete floor to be paid for separately) as per HPPWD specification as per approved drawing and designs or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royalty, Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimeters) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster ( R M P ) organic coating of 20( twenty ) micron over 5 ( five ) micron primer coating to back coat of polyster of 5 ( five ) micron over 5 ( five ) micron primer coating including fixing with prepainted iron J or L hooks , bolts and nuts 6mm (six millimeters ) dia meter with prepainted limpet and rubber washers complete with all accessories as required as per directions of Engineer in charge complete including carriage of materials within all leads and lifts and other incidental.

Providing and fixing ridges or hips 60 cm (sixty centimeters)over all with 0.60mm (zero point six zero millimeters) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) micron over 5 ( five ) microns primer coating to back coat of polyster of 5 ( five ) micron over 5 ( five ) micron primer coating including fixing with prepainted iron J or L hooks , bolts and nuts 6mm (six millimeters ) dia meter with prepainted limpet and rubber washers complete with all accessories as required as per directions of Engineer in charge including carriage of materials within all leads and lifts and other incidental.

Providing and fixing valley 60cm ( sixty centimeters )over with all 0.60mm ( zero point six zero millimeters ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks , bolts and nuts 6mm (six millimeters ) dia meter with prepainted limpet and rubber washers complete with all accessories as required as per the directions of Engineer-in- charge including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 0.63mm (zero point six three millimeters ) thick plain galvanized iron sheet 300mm (three hundred millimeter ) wide and 300mm (three hundred millimeter ) deep (Clear ) plain galvanized iron sheet gutter with iron brackets 40x3mm ( forty into three millimeter ) size bolts and nuts and washers etcetera .including making necessary connections with rain water pipe complete as per design and as per direction of Engineer-in Charge complete including carriage of material within all leads and lifts and other incidental charges

Providing and fixing Mild steel black plain sheet 1.66mm to 2mm ( one point six six millimeters to two millimeter ) thick in eaves boards/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge ( Base members of steel work shall be measured and paid separately) including carriage of materials within all leads and lifts.

Providing and fixing on wall faces 100mm (one hundred millimeters)dia meter P.V.C (D-plast ) rain water pipe of working pressure not less than 4.5 kg. / sqm( four point five zero kilogramme per square meter ) including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts and other incidentals charges.

Providing and fixing on wall faces P.V.C. (D-plast ) accessories for rain water pipe including filling the joints with approved adhesive complete. including carriage of materials within all leads and lifts ( i) P V C plain bend 100mm ( one hundred millimeter ) diameter .

Providing and fixing on wall faces P.V.C. (D-plast ) accessories for rain water pipe including filling the joints with approved adhesive complete. including carriage of materials within all leads and lifts and other incidental charges. i) P.V.C. plain shoe 100mm (one hundred millimeters) diameter pipes.

Providing and fixing mild steel holder bat clamps of approved design to cast iron sand cast iron or P.V.C. rain water pipe embedded in and including cement concrete block 10x10x10cm (ten into ten into ten centimeters) of 1:2: 4 (one cement; two sand: four graded /crushed stone aggregate 20mm (twenty millimeters) nominal size ) mix including cost of cutting holes and making good the wall etcetera complete and carriage of materials within all leads and lifts and other incidental. (i)100mm(One hundred millimeters)diameter for cast iron or PV C pipe.

Providing and fixing flushing 38cm (thirty eight centimeter) over all with 0.60mm (zero point six zero millimeters) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) micron over 5 ( five ) micron primer coating back coat of polyster of 5 ( five ) micron over 5 ( five ) micron primer coating including fixing with prepainted iron J or L hooks , bolts and nuts 6mm (six millimeters ) dia meter with prepainted limpet and rubber washers complete with all accessories as required as per directions of Engineer in charge including carriage of materials within all leads and lifts and other incidental.

Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. In trusses and trussed purlins in buildings.

Steel work welded in built-up section trusses and framed work ,composed of beams, joists , channels, angle, Tees , flats with connecting plates or angle , cleats as in main and cross beams hip and jack rafters purlins, connected to common rafters and like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. In grating, frame guard, bar ladders railing, bracket and similar work and in fire escape stair.

Providing and fixing angle iron cupboards frames manufactured from Mild steel angle iron section 25x25x5mm ( twenty five into twenty five into five millimeters ) thickness including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angles 25x25mm ( twenty five into twenty five millimeters ) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm ( two point five millimeters ) thick with provision for locking arrangement and shock observers as specified and applying a coat of approved steel primer after pretreatment of the surfaces as directed by the Engineer-in-charges complete including carriage of materials within all leads and lifts.

Providing and laying cement water proofing treatment in depressed slab shall be done with Dr. FIXIT Pidilite water proof coating shall be done in two coats apply first of Dr.Fixit –FAST FLEX to the clean and surface maintaining a coverage of 6-7 sqft ( six dash seven square foot 0.60 sqm ( zero point six zero square meter ) per kilogramme to achieve 1mm ( one millimeters ) thickness. This coating shall also be extended upto 300 mm ( three hundred millimeters ) vertically. The second coat shall be applied in opposite direction after 4 to 6 ( four to six ) hours of application of first coat then sprinkle sand on top surface of applied Dr. FIXIT FAST FLEX while still tacky over floor with suitable gradient towards drains water pipe while the second coat of Dr. FIXIT is still tacky including apply cement mortar 1 : 4 ( one cement : four sand) and admixed with 200 ml ( two hundred millimeter ) of pidi proof LW @ 200 ml ( two hundred mililitre ) per 50 kg ( fifty kilogramme ) bag complete upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Applying priming coat over new steel and other metal surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand papering complete with ready mixed priming paint brushing red lead / red oxide /zinic oxide chrome including carriage of materials with in all leads and lifts and other incidental and as per approved drawings, design and as directed by the Engineer in charge.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt dust and other foreign matter with enamel paint other than white including carriage of materials within all leads and lifts and other incidentals and as per approved drawings, design and as directed by the Engineer in charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of materials within all leads and lifts and other incidentals and as per approved drawings, design and as directed by the Engineer in charge.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping with enamel paint other than white including carriage of materials within all leads, lifts of materials and other incidental and as per approved drawings, design and as directed by the Engineer in charge.

6mm (six millimeter)thick cement plaster to ceiling with cement mortar 1:3(one cement; three sand) upto all floor level and curing complete including carriage of materials with in all leads and lifts and other incidental as per approved drawings, design and as directed by the Engineer in charge.

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6(one cement; six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering in all heights / floor level including arises, internal rounded angles, chamfers and/ or rounded angles in all girth and finished even and smooth including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge.

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6(one cement; six sand) in single coat on fair side of brick/concrete/stone walls for interior plastering in all heights floor level including arises, internal rounded angles chamfers and/ or rounded angles not exceeding 80mm ( eighty millimeters ) in all girth and finished even and smooth complete including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge.

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5(one cement; five sand) in single coat on fair side of brick/concrete/stone walls for exterior plastering in all heights floor level including arises, internal rounded angles chamfers and/ or rounded angles not exceeding 80mm ( eighty millimeters ) in girth and finished even and smooth in all heights / floor level including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5(one cement; five sand) in single coat on rough side of brick/concrete/stone walls for interior plastering in all heights floor level including arises, internal rounded angles chamfers and/ or rounded angles in all girth and finished even and smooth complete including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge

20mm ( twenty millimeters) thick cement plaster with cement mortar 1:4(one cement; foursand) in single coat on rough side of brick/concrete/stone walls for interior plastering in all heights / floor level including arises, internal rounded angles, chamfers and/ or rounded angles in all girth and finished even and smooth complete including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge

20mm ( twenty millimeters) thick cement plaster skirting upto any height with cement mortar 1:3(one cement; three sand) finished with a floating coat of neat cement including rounding of junction with floor upto all heights / floor level including arises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80mm ( eighty millimeters ) in girth and finished even and smooth in all heights / floor level including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge

15mm (fifteen millimeters) thick cement plain mortar raised band in cement mortar 1:4(one cement; four sand) upto any width including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge

20mm (fifteen millimeters) cement plain mortar raised sunk band in cement mortar 1:4(one cement; four sand) upto any width including carriage of materials with in all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge

Applying JK / Birla whitewall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose material and other foreign matter sand papered smooth to give final finish to the surfaces complete including carriage of materials with in all leads and lifts and as per approved drawings, design and as directed by the Engineer in charge.

Distempering (two or more coats)with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth priming coat with distemper primer including carriage of materials within all leads, lifts, and other incidentals and as per approved drawings, design and as directed by the Engineer in charge.

Wall painting ( two or more coat ) with plastic emulsion paint of paint approved brand and manufacture ( Nerolac / Asian paint ) and of approved shade for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surfaces free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces complete including carriage of materials with in all leads and lifts and as per approved drawings, design and as directed by the Engineer in charge.

White washing with lime on undecorated wall surfaces (two or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including papering the surface even and sand papered smooth and carriage of materials within all leads and lifts

White washing with lime on undecorated ceiling and / or sloping roofs ( two or more coats ) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drops and other foreign matter including carriage of materials with in all leads and lifts and other incidental charges

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) of Asian paints/Nerolac paints or its equivalent brand and manufacture of approved shade on undecorated concrete / stone / plastered wall surfaces with ( two or more coats ) to give an even shade and final finish after thoroughly cleaning / brushing the surfaces free from all dirt , dust mortar dropping and other foreign matter and sand papered smooth in all heights / floor level including applying of putty as required for making the surfaces complete including carriage of materials with in all leads and lifts and as per approved drawings, design and as directed by the Engineer in charge.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two or more coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials in all heights / floor level including applying of putty as required for making the surfaces complete including carriage of materials with in all leads and lifts and as per approved drawings, design and as directed by the Engineer in charge

Providing under layer for plinth protection of 75mm (seventy five millimeters ) thick ( unconsolidated ) bed of dry brick/stone broken/ crushed aggregate 40mm ( forty millimeters ) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete and carriage of materials within all leads and lifts and other incidental charges and as per approved drawings, design and as directed by the Engineer in charge.

Providing plinth protection 50mm ( fifty millimeters) thick in cement concrete 1:3:6 ( one cement :three sand: six graded stone aggregate 20mm (twenty millimeters ) nominal size ) and curing complete including finishing the top surface of concrete smooth and carriage of materials within all leads and lifts and as per approved drawings, design and as directed by the Engineer in charge.

Construction of covered drain of size 15cmx23 cm ( fifteen centimeter into twenty three centimeter ) in cement concrete 1:3:6 (one cement :three sand :six graded broken/crushed stone aggregate 20mm (Twenty millimeters) nominal size including finishing the top surface ,earth work, shuttering ,cast in situ- of RCC slab over drain and cement concrete foundation 1:2:4 (one cement :two sand :four graded broken/crushed stone aggregate 20mm (Twenty millimeters) nominal size ) and finished with a floating coat of neat cement including cost of reinforcement complete as per standard drawing and design and including carriage of materials in all leads and lifts and other incidental charges.

Preparation of sub grade by dressing to comber ( Earth work for the cutting involved for sub –grade to be paid for separately depending upon the classification of soil completed as per HP.PWD. specifications or as per directions of Engineer in charge including carriage of materials within all leads and lifts. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government

Consolidation of sub grade with road roller including making good the undulation etcetera with earth or quarry soil etcetera and re-rolling the sub-grade completed as per HPPWD specifications or as directed by the Engineer in charge including carriage of materials within all leads and lifts. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing, laying, spreading and compacting of stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 K.N. static Road roller in stages to proper grade and camber, applying and brooming, crushable screening at the rate of 0.22 cum ( zero point two two cubic metres) per ten square metres,, to fill up the intersitices of coarse aggregate, watering and compacting to the required density grading –I, 90mm to 45mm ( ninety millimetres to forty five millimetres)size, 75mm ( seventy five millimetre) compacted thickness as per M.O.R.D. technical specifications clause No. 405 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing, laying, spreading and compacting stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 K.N. static Road roller in stages to proper grade and camber, applying and brooming , crushable screening at the rate of 0.22 cum ( zero point two two cubic metres) per ten square metres, to fill up the intersitices of coarse aggregate, watering and compacting to the required density grading –II 63mm to 45mm ( sixty three millimetres to forty five millimetres)sizes, 75mm ( seventy five millimetres) compacted thickness as per M.O.R.D. technical specifications clause No. 405 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and applying primer coat with bitumen emulsion (SS-1 ) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer at the rate of 0.70 to 1.00 kg/ sqm ( zero point seven to one point zero zero kilogramme ) per square meter, using mechanical means as per technical specifications clause No. 502 including hauling of materials in all leads , lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor on the prepared surface of granular base treated with primer and including cleaning of road surface with hydraulic broom and spraying tack coat distributor at the rate of 0.25 to 0.30 kg. / sqm. ( zero point two five to zero point three zero kilogramme ) per Square metre using mechanical means as per technical specifications clause No. 503 including hauling of materials in all leads , lifts and as per entire satisfactions and directions of Engineer-in- charge including carriage of materials.. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. .

Providing, laying and rolling of open graded premix carpet of 20mm ( twenty millimeter) compacted thickness composed of Type-A 13.2mm ( thirteen decimal two millimeter) to 5.6mm ( five decimal six millimetre) aggregate at the rate of 0.27cum ( zero point two seven cubic metre), per ten square meter mixed with penetration grade bitumen VG-10 ( viscosity grade-10 ) at the rate of 14.60 Kg. (fourteen point six zero kilogramme) per ten square metre of road surface, to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing and heating, binder and aggregate in Hot Mix Plant 30/40 ( thirty / forty ) tonne per hour capacity, transporting mixed materials with tipper and laying with paver finisher to the required grade and camber and rolling with a three Wheel 80-100 ( eighty- hundred) KN static road roller capacity finished to required level and grade to be followed by seal coat as per technical specifications clause No. 508 including hauling of materials in all leads , lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying seal coat for sealing the voids in a bituminous surface laid to specified level grade and cross fall using type-B as per technical specification clause 510 premixed with 6.80 kg ( six point eight zero kilogramme) VG-10 ( viscosity grade-10 ) premixed with 0.06 ( zero point zero six) cubic metre of fine aggregate per 10 Sqm. ( Ten square metre) heated in mini hot mix plant and laying manually of mixed material and rolling with power road roller 8-10 ( eight to ten capacity) including hauling of materials in all leads , lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Governments

Providing and filling crushed stone aggregate of 25 mm ( twelve five millimeter )nominal size in soakage pit complete as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and filling crushed stone aggregate of 12 mm ( twelve millimeter ) nominal in soakage pit complete as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government..

Providing and filling crushed stone aggregate of 90 mm ( twelve millimeter ) nominal size in soakage pit complete as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate including of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Water supply and sanitary installation : Providing and fixing plytheline aluminium polythylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 kilee or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fittings (internal work ) pipes exposed on wall Internal work Exposed on wall 1216 (one thousand two hundred sixteen ) (16mm O.D. pipe ) (sixteen millimeter outer dia meter )including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge.

Providing and fixing plytheline aluminium polythylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 of kitee or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall 1620 (one thousand six hundred twenty)(20 mm OD pipe) (twenty millimeter outer dia metre ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge.

Making connection of galvanized steel distribution branch with galvanized mild steel main 20mm to 40mm( twenty millimeter to forty millimeter) nominal bore by providing and fixing tees including cutting and threading the pipes complete including carriage of materials within all leads and lifts..

Providing and fixing 110mm (one hundred ten millimeters) diameter high pressure P V C ( poly vinyl chloride) spigot and socket waste ventilating pipes ISI marked including fixing with approved adhesive complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government..

Providing and fixing 75mm ( seventy millimeters) diameter high pressure P V C ( poly vinyl chloride) spigot and socket waste ventilating pipes ISI marked including fixing with approved adhesive complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government..

Providing and fixing 75 mm ( seventy five millimeters ) dia meter PVC Single equal branch With oval access door ISI marked insertion rubber washer 3 mm (three millimeter ) thick, bolts and nuts complete fitting fixing with approved adhesive etcetera . complete as per directions of Engineer-in- charge and including carriage of material within all leads and lifts and other incidental

Providing and fixing cast iron holder bats including steel bolts to sand cast iron / cast (spun ) iron pipes embedded in and including cement concrete block 100 mm x 100 mm x 100mm ( one hundred millimeters into one hundred millimeters into one hundred millimeters ) of 1:2:4 ( one cement : two sand: four graded stone aggregate 20mm ( twenty millimeters ) nominal size ) mix including cost of cutting holes and making good the walls complete as directed by the Engineer-in- charge including carriage of materials within all leads and lifts ) 100mm (one hundred millimeters) nominal diameter./ Size pipe.

Providing and fixing cast iron holder bats including steel bolts to sand cast iron / cast (spun ) iron pipes embedded in and including cement concrete block 100 mm x 100 mm x 100mm ( one hundred millimeters into one hundred millimeters into one hundred millimeters ) of 1:2:4 ( one cement : two sand: four graded stone aggregate 20mm ( twenty millimeters ) nominal size ) mix including cost of cutting holes and making good the walls complete as directed by the Engineer-in- charge including carriage of materials within all leads and lifts ) 75mm. ( seven ty five millimeters)nominal diameter/ size pipe.

Providing and fixing PVC ( poly vinyl chloride) Supreme/ Kishan/ Astral or its equivalent plain bend including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government. 110mm (one hundred ten millimeter) dia meter

Providing and fixing PVC ( poly vinyl chloride) Supreme/ Kishan/ Astral or its equivalent plain bend including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government. 75mm (seventy five millimeter) dia meter

Providing and fixing PVC ( poly vinyl chloride) Supreme/ Kishan/ Astral or its equivalent Heal rest bend including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government. 110mm (one hundred ten millimeter) dia meter

Providing and fixing PVC ( poly vinyl chloride) Supreme/ Kishan/ Astral or its equivalent Heal rest bend including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government. 75mm (seventy five millimeter) dia meter.

Providing and fixing PVC ( poly vinyl chloride) Supreme/ Kishan/ Astral or its equivalent Heal rest bend including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government. 75mm (seventy five millimeter) dia meter.

Providing and fixing PVC ( poly vinyl chloride) Supreme/ Kishan/ Astral or its equivalent collars ISI marked including fixing with approved adhesive etcetera complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government. ,75mm (one seventy five millimeter) dia meter.

Providing and fixing 110mm ( one hundred ten milimeters ) dia meter PVC ( poly vinyl chloride) Supreme/ Kishan/ Astral BIS marked No. 14735 cowl including fixing with approved adhesive complete including carriage of materials within all leads and lifts and other incidental.

Providing and fixing 75mm ( seventy five milimeters ) dia meter PVC ( poly vinyl chloride) Supreme/ Kishan/ Astral BIS marked No. 14735 cowl including fixing with approved adhesive complete including carriage of materials within all leads and lifts and other incidental.

Providing and fixing P V C .( poly vinyl chloride) floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 110mm x 90mm (one hundred ten millimeter into ninty millimeters)

Providing and fixing vitreous China wash down water closet (European Type WC pan) of approved make (HIND WARE/CERAMAKE) and of approved shade, with integral ‘P’ or ‘S’ trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) complete (seat cover to be measured and paid for separately ) Universal closet NO.20061 of Hindware size 530x410mm (five hundred thirty into four hundred ten millimeter ) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 10/12.50/15.00 (ten / twelve point five / fifteen ) liters capacity P.V.C low level flushing cistern with a pair of C.I or M.S. brackets complete with fitting such as lead valve, less syphen , 15mm (fifteen millimeters) nominal size brass ball valve with polythene float C.P. brass handle, unions and couplings for connections with inlet, outlet and overflow pipe 40mm (forty millimeters) dia. P.V.C.flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet complete as per HPPWD specification or as directed by Engineer In charge including carriage of materials within all leads and lifts.

Providing and fixing HIND WARE/CERA MAKE orrisa pattern vitreous china water closet squatting pan No. 20042 (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) white shade (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals and as per directions of Engineer-in- charge. The rate including Sales tax, Toll tax or any other taxes imposed by the Government .

Providing and fixing sand cast iron 100mm ( one Hundred millimeters) size “P” or “S” trap for water closet (squatting pan) ISI marked including jointing the trap with pan and soil pipe in cement mortar 1:1 ( one cement; one sand ) complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing Hollow type black or white seat and cover for wash down water closet with CP brass hinges end rubber buffers of Hindware or its equivalent complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing vitreous china flat back No 5001 of size 430x260x350mm ( four hundred thirty into two hundred sixty into three hundred fifty millimeters ) bowl pattern urinal with automatic flushing cistern of Hindware/ Cera or its equivalent including connecting the urinal with waste pipe by mean of white lead mixed with chopped limpet complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing vitreous china (Hindware/Cera make )division plate for Urinals size 600mmx300 mm ( six hundred millimeter into three hundred millimeters ) complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge

Providing and fixing flat back 630x450mm( six hundred thirty into four hundred fifty millimeters) nominal size vitreous china wash basin with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fitting complete including carriage of materials within all leads and lifts and other incidental

Providing and fixing 610x460mm(Six hundred ten into four hundred sixty millimeters) size with bend depth 200 mm ( two hundred millimeters ) stainless steel kitchen sink with drain board and C.P waste with cast iron or M.S brackets painted white including cutting holes and making good the same complete including carriage of materials with in all leads and lifts..

Providing and fixing vitreous china (Hindware/Cera Make ) pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (thirty two millimeter) diameter rubber plug for wash basin or sink complete including carriage of materials within all leads and lifts and other incidental.

Providing and fixing 32mm (thirty two millimeters)diameter M.I. union for wash basin or sink complete including carriage of materials within all leads and lifts and other incidental.

Providing and fixing 32mm (thirty two millimeters)diameter chromium plated brass waste of Jal/ ESS ESS or its equivalent for wash basin or sink complete including carriage of materials within all leads and lifts and other incidental.

Providing and fixing ISI marked 100mm ( one hundred millimeter)dia chromium plated gratings Jal/ ESS ESS or its equivalent grating of superior quality for floor, gully , or Nahni trap complete including carriage of materials with in all leads and lifts as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing 600mm x 450mm (six hundred millimeters into four hundred fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm ( six millimeters) thick asbestos cement sheet or ply wood sheet and fixed to wooden plugs with chromium plated Brass screws and washers complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge

Providing and fixing 600x20mm.(Six hundred fifty into twenty millimeter) chromium plated brass towel rail of Prayag/ Hindware/ Cera complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge .

Providing and fixing 600x120mm(Six Hundred into One Hundred twenty millimeter ) glass shelf with Chromium plated brass bracket of heavy duty of ISI marked IS No. 8931 and 8934 and guard rail complete fixed to wooden plugs with Chromium plated brass screws including carriage of materials within all leads and lifts or as directed by the Engineer-in-Charge

Providing and fixing C.P. brass toilet paper holder of heavy duty of ISI marked IS No. 8931 and 8934 with C.P. brass washer and nut complete including carriage of materials within all leads and lifts.

Providing and fixing PTMT Jet spray of approved quality and colour with 1.5 m ( one point five meter ) tube complete including carriage of material with in all leads and lifts and other incidentals.

Providing and fixing chromium plated brass shower rose 150mm dia ( one hundred fifty millimeter dia meter ) with 15mm ( fifteen millimeters ) or 20mm ( twenty millimeters ) inlet complete including carriage of materials within all leads and lifts and other incidental.

Providing and fixing 15mm (fifteen millimeters )diamete chromium plated brass bib tap of ISI marked No. 8934 with capstan head complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing 15mm (fifteen millimeters) diameter brass stop cock of Prayag/ Hindware/ Cera with necessary fitting including carriage of materials within all leads and lifts or as directed by the Engineer-in-Charge.

Providing and fixing15mm (fifteen millimeter)diameters chromium plated brass pillar tap of Prayag/ Hindware/ Cera with capstan head complete including carriage of materials with in all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing chromium plated brass angle valve of Prayag/ Hindware/ Cera 15mm (fifteen millimeter)diameters without nuts and pipe complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge.

Providing and fixing 15mm ( fifteen milimetre)nominal bore brass full way valve with wheel complete including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge.

Providing and fixing 15mm ( fifteen milimetre)nominal bore brass valve ( Horizontal plunger ) type high pressure with polythene plastic floats complete including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge.

Providing and fixing P.V.C. Connection pipe with brass unions 300/450mm ( three hundred / four hundred fifty millimeter ) long and 15mm (fifteen millimeters) nominal bore including carriage of materials within all leads and lifts or as directed by the Engineer-in-Charge.

Providing and fixing 32mm (thirty two millimeters) diameter PVC waste pipe flexible (Coil Type) length not less than 800 mm (eight hundred milimeters)for wash basin or sink complete including carriage of materials within all leads and lifts and other incidentals.

Providing and fixing 1000(one thousand ) liter net capacity tank P.V.C.(poly vinyl chloride) water storage tank cylindrical shape ( ISI :12701 marked / Treepal layer ) universal or equivalent make ) including providing and fixing 15mm ( fifteen millimeters) nominal bore galvanized mild steel tube over flow pipes, inlet and out let with fitting of suitable size along with ball valve and floating valve and P.V.C.( poly vinyl chloride) mosquito proof cover with locking arrangement including providing suitable base pad and hoisting in all heights including carriage of materials within all leads and lift and or as directed by the Engineer-in-Charge and type of taxes imposed by the Government and or as directed by the Engineer-in-Charge and type of taxes imposed by the Government.

Providing and laying (to level or slope) and jointing with stiff mixture of cement mortar in proportion of 1 : 1 (one cement : one sand ) salt glaze stone ware pipe grade ‘A’ complete of 150 mm (one hundred fifty millimeter) internal dia meter, including testing of pipes and joints complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement; five sand : ten graded /crushed stone aggregate 40mm(forty millimeters) nominal size bedding for stone ware pipe of 100 mm (one hundred millimeter) internal dia meter, including testing of pipes and joints complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked galvanized mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor in all heights / floors including carriage of materials within all leads and lifts. I) 20mm( twenty millimeters) nominal bore.

Providing and laying cement concrete 1:5:10 (one cement; five sand : ten graded /crushed stone aggregate 40mm(forty millimeters) nominal size bedding for stone ware pipe of 150mm (one hundred fifty millimeters) internal diameter including necessary form work and curing complete including carriage of materials within all leads and lifts and other incidental.

Constructing manhole with reinforced cement concrete top slab in cement concrete 1:2:4 ( one cement; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size), foundation concrete 1:4:8 ( one cement : four sand: eight graded / crushed stone aggregate 40mm(forty millimeters) nominal size) in side plastering 15mm ( fifteen millimeters) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size) finished smooth complete including curing and testing a) inside size 800mmx800mm (eight hundred millimeters into eight hundred millimeters) and 500mm ( five hundred millimeter ) deep including cast iron cover with frame (light duty single seal pattern-I ) 455 x 610mm( four hundred fifty five into six hundred ten millimeters) internal dimension total weight of cover and frame to be not less than 38 kg. ( thirty eight kilogram ) (Weight of cover 23 kg. (twenty three kilogramme) and weight of frame 15 kg.)(fifteen kilogramme) with 300mm (three hundred millimeters ) thick walls of square rubble masonry coursed with hard stone of approved quality in cement mortar 1:3(one cement; three sand) complete including carriage of material within all leads and lifts and other incidentals

Constructing manhole with reinforced cement concrete top slab in cement concrete 1:2:4 ( one cement; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size), with foundation concrete 1:4:8 ( one cement : four sand: eight graded / crushed stone aggregate 40mm(forty millimeters) nominal size) in side plastering 15mm ( fifteen millimeters) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement ; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size) finished smooth complete including curing and testing a) inside size 800mmx800mm (eight hundred millimeter into eight hundred millimeters) including cast iron cover with frame (light duty single seal pattern-I ) 455 x 610mm( four hundred fifty five into six hundred ten millimeters) internal dimension total weight of cover and frame to be not less than 38 kg. ( thirty eight kilogramme ) (Weight of cover23kg.(twenty three kilogramme)and weight of frame 15 kg.)(fifteen kilogramme) with 300mm (three hundred millimeters ) thick walls of square rubble masonry coursed with hard stone of approved quality in cement mortar 1:3(one cement; three sand) complete including carriage of material within all leads and lifts and other incidentals or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government

Constructing brick masonry chamber for underground cast iron inspection chamber bends with second class common burnt clay building bricks in cement mortar 1:5 (one cement; five sand ) cast iron cover with frame ( light duty ) 455x 610 ( four hundred fifty five into six hundred ten millimeters ) internal dimension , total weight of cover and frame to be not less than 38 kg ( thirty eight kilograme ) weight of cover 23 kg. ( twenty three kilogramme) and weight of frame 15 kg. ( fifteen kilograme) R.C.C. top slab with cement concrete 1:2:4 ( one cement; two sand; four graded / crushed stone aggregate 20mm ( twenty millimeters ) nominal size), foundation concrete 1:5:10 ( one cement : five sand: ten graded stone aggregate 40mm (forty millimeters) nominal size in-side plastering 15mm ( fifteen millimeters) thick with cement mortar 1:3 (one cement; three sand) finished with a floating coat of neat cement on walls and bed concrete etcetera inside dimensions 455x 610 x 450 mm ( four hundred fifty five into six hundred ten millimeters into four hundred fifty millimeters ) deep single pipe line complete as per HPPWD. Specifications or as directed by the Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals and all type of taxes imposed by the Government

Providing and fixing composite end seal compression fittings as per IS-15054- 2004- for cold water supply e.g. tees, elbow, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls including carriage of materials within all leads, lifts and other incidentals incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government. Equal tees 1620 mm ( one thousand six hundred twenty millimeter )

Female elbows 1216x15mm ( one thousand two hundred sixteen into fifteen millimeter) thread .

Female branch Tee 1620x1620mmx20mm ( one thousand six hundred twenty into one thousand six hundred twenty into twenty millimeter) thread

Female elbows 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread

Male thread connector 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread

Fe-male thread connector 1620x15mm ( one thousand six hundred twenty only) thread

Supplying and fixing Cast Iron cover with frame (light duty single seal pattern ) rectangular 455x610mm ( four hundred fifty five into six hundred ten millimeters ) internal dimension ,total weight of cover and frame weight 38 kg ( thirty eight kilogramme) ( Single seat ) ( weight of cover 23 kg ( twenty three kilogramme) and weight of frame 15 kg ) ( fifteen kilograms ) as per directions of Engineer-in- charge and including carriage of material within all leads and lifts and other incidental and as per directions of Engineer-in- charge

Naveen sharma

ANIL MAHAJAN