Loading…
Loading…
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
28 Aug 2026, 6:00 pmDue today
AGE I R AND D
AGE I R AND D KOCHI, THRIKKAKARA,KAKKANAD, KOCHI 682021
REPAIR MAINTENANCE OF STREET LIGHTS POST TOP GARDEN LIGHTS HIGH MAST LIGHTS AND CONNECTED WORKS AT NPOL KOCHI
2026_MES_783375_1
8430E8AGEIRDK
Open Tender
Civil Works - Others
Item Rate
330 days
KAKKANAD
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
AGE I R AND D KOCHI
₹36,000
Yes
7 Aug 2026
7 Aug 2026
4 Sept 2026
7 Aug 2026
28 Aug 2026
21 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repair to street light/flood light of any type , any description mounted on pole/ Roof/ wall ,disconnecting electrically, testing of all components to ascertain defective parts of the fitting and testing the conductivity of electric cable of internal wiring of the fittings, dismantling of defective components and testing the fitting after replacement of defective components and cable of internal wiring and making the fitting fully functional testing complete. | 30 | Each Job | - | - |
| 2 | All as pe Ser item No 1.00 above but post top / Bollard light | 30 | Each Job | - | - |
| 2.02 | Cost of the driver, cables which will be paid for separately as supply only. | - | - | - | - |
| 2.03 | Scope of work includes for minor stores i.e. pvc insulation tapes, screws, insulation sleeves, nuts, bolts, washers and flexible cable 23/0.0076 (for internal wiring) etc as required at site. | - | - | - | - |
| 3 | Repair to high mast light fitting mounted on up to 16 mtr height structure of qty 09 to 12 light fitting , lowering disconnecting electrically, testing of all components to ascertain defective part of the fitting and testing the conductivity of electric cable of internal wiring of the fittings, dismantling of defective components, testing the fitting after replacement of defective components and making the fitting fully functional finally entire unit to be raised upto its original level complete. (The necessary components should be measured and paid separately) | 2 | Each Job | - | - |
| 4S&F LED street light luminaires with pressure die cast aluminum housing , Heat resistant toughened glass with frame and IP 66 protection for following wattage including taking down existing unserviceable HPSV/MH fitting from from Steel /PCC pole up to 9.00 Mtrs height or from wall complete all as specified and as directed. Note: Height of new fitting should adjusted to achieve better illumination level so as to match with LED fittings as directed. | |||||
| 4.01 | LED fitting 45 Watt :Make: ENDURASUNDOWNSL45WLED765PASYBOPC or equivalent in Havells/Jaquar/Philips | 10 | Each | - | - |
| 4.02 | LED fitting 60 Watt with minimum 10 KV SPD and 110 lum/Watt Efficacy: Make: Crompton Cat part No CRP-409-60-57-SL-GL-NSG or equivalent in Havells/Jaquar/Philips | 15 | Each | - | - |
| 4.03 | LED fitting 90 Watt minimum 10 KV SPD and 110 lum/Watt Efficacy:: Make: Crompton Cat part No CRP-411-90-57-SL-GL-NSG or equivalent in Havells/Jaquar/Philips | 15 | Each | - | - |
| 5 | S & F cable 3 core PVC insulated unsheathed multistranded copper conductor of size 1.5 Sq mm in replacement passing through PVC conduit from junction box to light fitting complete all as directed. (for street lights/ flood ligts) Make: Finolex/Poly Cab/Havell's Note: PVC conduit is measured and paid separately. | 200 | RM | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
8430TENDERDOCUMENTS.pdf
Tender Documents • 0.65 MB
BOQ_877695.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].