Augmentation work for Electrical, Mechanical & Instrumentation works with 3 years Comprehensive O&M for Existing Ambedkar Sewage Pumping Station (SPS) at Sabarmati Riverfront of Ahmedabad Municipal Corporation (AMC).

Name of Work : Augmentation work for Electrical, Mechanical & Instrumentation works with 3 years Comprehensive O&M for Existing

Ambedkar Sewage Pumping Station (SPS) at Sabarmati Riverfront of Ahmedabad Municipal Corporation (AMC).

Earnest Money Rs. : Rs. 5,61,000/-

Date of Opening of Tender :

Estimated Price : Rs. 5,60,95,832/-

1) I / We am / are willing to carry out work at _________ % above/below percent (in figures) (should be written in figures and words) of the

estimated cost, as mentioned above. Amount of my / our tender works out for Rs. ________________ (in figures)

Estimated amount put to tender Rs. Estimated amount put to tender Rs.

Signature of Contractor

Company’s seal :

SUMMARY OF SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL & INSTRUMENTATION

WORKS WITH 3 YEARS OPERATION AND COMPREHENSIVE MAINTENANCE FOR EXISTING SPS AT AMBEDKAR -

SABARMATI RIVERFRONT OF AMC.

Sr. No. Name of Work

A MECHANICAL & INSTRUMENTATION WORKS

B ELECTRICAL WORKS

C O&M FOR 3 YEARS

I TOTAL CAPITAL COST WITHOUT GST ( A + B + C )

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR

EXISTING SPS AT AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

1.1.1 SUBMERSIBLE NON-CLOG PUMP SET 8 Set 41,44,880

SITC of Submersible NC Pump-Motor set suitable for sewage application with semi-open

or enclosed or suitable type Impeller & wear Rings in CF8M with CI FG 260 Casing &

casing cover, SS 410 shaft & with motor suitable for 3-Phase, 415 V, 50 Hz., AC

induction Air filled dry type submersible motor of mini. rating as specified having max.

1000 RPM (speed), insulation Class 'F' With temp. rise limited to class B and IP-68

The scope shall include all required accessories viz. automatic coupling device, SS-304

heavy duty & of suitable size double guide pipes of length to suit the sump height with

required supports, SS-304 or suitable stainless steel grade Chain with shackles (shall be

with dual hook / shackles of 150 mm or suitable higher size at app. every 1.5m C-C

distance) & of length as per existing sump height + min. 3m, Submersible Power & control

cable (copper flexible & stranded type conductor of reqd. cores & size for each pump

motor set) & 15 m length of each run with necessary electrical termination connection at

junction box / starter panel and RCC foundation blocks for auto coupling & delivery bend,

PMU etc. complete as per IS, and Specification and also including in scope any other parts

/ accessories / fittings required to complete the work in all respects & satisfactory

operation of pump set.

Pump Capacity: 2070 m³/hr.,

Motor Rating: min. 180 kW (or higher rating as reco. by pump mfg.)

Over all Efficiency at Duty- min. 73.5%

(Note: The work to be carried out in existing SPS and with Minimum Shut-down.)

2.1.1 SITC of Non slam, flanged, Multi Door type Non Return Valve conforming to IS 5312 8 Nos. 2,17,494

(Part-2), PN 1.0, having CI / DI body and door, CF8M seat rings alongwith all necessary

hardwares as per specifications and complete in all respect.

Size: 600 mm NB

3.1.1 Supply of Flange ends Expansion Bellow (PN 1.0) as per EJMA standards, as per specs. 8 Nos. 29,280

& complete in all respect.

Size: 600 mm NB x 300 mm (L)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

4.1.1 MS PIPES & SPECIALS 8 RMT 11,081

Supply, Gas cutting of pipe, Fabrication, Welding, Installation, Testing and

commissioning of MS pipe & Specials, reducer, expander, bend, Y-Joint, TEE etc.

conforming to IS 3589 & flanges confirming to IS 6392-PN-1.0, fabricated from MS. plate

with necessary supports & anchoring. Pipe fabricated from MS plate. (Excluding supply of

Size : 610 mm OD X Mini. 10 mm Thk.

4.2.1 Supply, welding , Installation, testing & commissioning of MS flat machnied faced 16 Nos. 5,670

flanges confirming to IS 6392 & drilled to IS -1538 with drilling off center bolt holes

and flange thickness as per PN 1.0 including cutting & welding.

Size : 600 mm NB - Drilled

5.1.1 LEVEL MEASURING SYSTEM FOR SUMP (RADAR TYPE) 1 Set 1,08,000.00

Supply, installation, testing and commissioning of Non-Contact Radar Type Level

Transmitter with 20 meter cable along with Process Indicator for Local Display (local

mounted process indicator shall be 2 wire supported) in WP enclosure with signal

retransmission, required length of power and signal cable from ICP cubicle, gland,

termination, required accessories, hardware, consumables, mounting stand, etc. complete

in all respects and as per specification etc. and having following measurement ranges for

Sewage application:

Meas. Range: upto 20 m (at sump)

The scope also includes providing 4" flanged puddle pipe approximate 300 mm long

including fixing of the same in existing civil structure slab of Sump for mounting of

sensor .The work also include all necessary work like make hole,repair / modificationin

existing slab, etc.

6.1.1 SITC of Rolling shutter with red oxide primer & colour made of 80 mm wide M.S. laths 1 Lot 63,210.00

inter-locked together through their entire length and jointed together at the ends by locks

mounted on specially designed pipe shaft with bracket plates, guide channels and

arrangement for inside and outside locking with push-pull with gear operated complete but

excluding the cost of hood cover and spring. (B) shutters having width above 3.5 m or

following size at room and other required accessories to complete the work in all respects.

Size : 3.5 m H x 3 m W - 2 Nos. shutter (size shall be as per actual existing site) - approx.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

7.1.1 FIXED TYPE ELECTRIC CHAIN HOIST 4 Set 2,34,310.00

SITC of Electrically Operated Chain Hoist, suitable to fix on Existing Girder, having

motorised motion in vertical lifting , manufactured as per IS:6547-1972-Class-II & IS-

3177- Class-II, complete with electrically operated chain hoist, brake, chain-gear, motors,

safety device, pendant push button, starter panel, cables from motor to starter panel and all

other required accessories like limit switches, panel, power supply system (Fastoon cable

type), fasteners, epoxy painting, etc. tested for over load as per IS complete as per

specifications and complete in all respect.

Capacity : 1 Ton. Min. (For Manual Screen Lifting & Lowering)

'Lift : 15.00 m as mini. or as per site req.

8.1.1 Providing, Supply of Structure Steel at site of work with freight, loading, unloading 2,000 kg. 64.84

carting, etc. including all taxes and duties complete such as joints, channels, angles, Iron

Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (Min. 8 mm thickness) for cable

trench etc. required for support structure of all Electro-mechanical equipment, piping, etc.

for support on floor / wall / beam / brackets etc. as per tender and IS.

9.1.1 Labour Charges for lowering, laying, Fixing with fabrication various size section of MS 2,000 kg. 11.37

such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered

plates, for cable trench etc Complete with two coats of red oxide and two coats of

approved colour shade of epoxy paint as per relevant IS and as per specification.

10.1.1 SITC of Heavy Duty FRP mesh Gratings and other required accessories to complete the 140 Sq. 2,500.00

work in all respects. mtr.

(Location as per instruction of Engineer-In-Charge of AMC)

Opening – 50 x 50 mm

(For all existing SPS E-3, Ambedakar & W-5 usmanpura of SRFDCL)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

11.1.1 Job-Work of repairing the inlet sluice gate by releasing jammed spindle 2 Nos 1,20,692.35

rod from head stock, by repairing or replacing the gunmetal nut and servicing and

functionalizing the gate at Existing SPS.

Scope also include straightening of bent spindle, removing and releasing the bent and

jammed spindle from head stock foundation after breaking the concrete by electric

demolition hammer, reinstating the buckled head stock, removing bent lengths, adding new

straight length of spindle with new coupler, welding and fixing the bolts to hold the head

stock, replacing the fixing gun metal nut and set of thrust bearings, replacing gears

damaged inside the gear box, fabrication and fixing of brackets to hold straight the spindle

during up-down operations, greasing all parts and refaxing the gate, with arrangement of

welding set, gas cutting set, demolition hammer, rotary hammer drill, hand tools, all safety

equipment’s to work inside the inlet chamber, hanging zoola, safety ropes, safety belts, etc.

complete work in all respect. (Satisfactory erection & operation of Gate shall be

responsibility of Bidder/contactor.)

12.1.1 Job-Work of repairing, fabricating and fixing brackets in between the 2 Nos 76,541.90

barrier and head stock fixed by anchor bolts on inlet chamber inlet, and repairing of

railings to work safely around top of screen chamber, at Existing SPS.

Scope also include removing and cutting old bolts by arranging and carting all tools,

welding and gas cutting sets, MS angles, pipes, arrangement of skilled workers who can

work at heights with safety, and hand tools, all safety equipment’s to work, anchor bolts,

and misc. jobs as directed by E-I-C. complete work in all respect. (Satisfactory erection &

operation of Gate shall be responsibility of Bidder/contactor.)

13.1.1 Job-Work of repairing the inlet screens by releasing / removing / recovering old 4 Nos 1,43,284.90

damaged / bent / jammed screens from over head lifting arrangement, repairing or

replacing the damaged angles / channels / screen flat bars and side rollers, strengthening of

the screens, repairing inner guides installed in walls up to full possible bottom sewage

level, adding new mild steel flat bars, fabricating and fixing roller guide brackets in walls

in screen chamber inlet wall, at SPS.

Rate to include removing and cutting old fixtures by arranging and carting all tools,

welding and gas cutting sets, MS. angles, structural steel, arrangement of skilled workers

who can work at heights with safety, and hand tools, all safety equipment’s to work,

anchor bolts, and misc. jobs as directed. (Satisfactory erection & operation of Screen shall

be responsibility of Bidder/contactor.)

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

14.1.1 MISCELLANEOUS WORK 1 Lot 72,000.00

Dismantaling & removal / shifitng & Reinstall in existing SPS like Pumpset, ECH,

Rolling shutter, all electrical cables, LT Panel, Cable end termination etc. any other

equipments not listed here in but installed in pump house & required to be dismantled /

shifting and including all Loading, Transportation, Unloading & Stacking them at Store or

location as per instruction of Engineer-In-Charge of AMC and as per the tender scope /

14.1.2 Providing and applying epoxy paint of approved make to concrete surface for RCC 1900 m2 90.00

structure including cleaning the surface by scrapping and air blowers to the satisfaction of

Engineer-in-charge necessary scaffolding etc. complete with all leads and lifts and giving

satisfactory hydraulic test for water tightness as per IS codes. For new surface-Two coats

14.1.3 Providing and laying 50 mm thick heavy duty cement concrete flooring in 1:2:4 (1 33 m2 431.94

cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with ironite

powder including finishing with a floating of neat cement etc. complete laid in one layer in

wet well area below GL, and for platform of pumphouse 50 mm thick

14.1.4 Providing and fixing 40mm dia. GI pipe medium weight quality as openable type with 100 m 1,784.00

angle iron support at 1.5 m c/c using 75 x 75 x 10 mm angles, 1 m long with three rows of

pipes as railing including necessary painting with two coats of approved quality oil paint

over one coat of approved primer including necessary welding, bolting required, id any.

14.1.5 Providing and applying of Wall Painting of Ex. SPS 1000 Sq. ft 71.50

14.1.6 Miscellaneous Civil Work 1 Lot 50,000.00

This scope covers all miscellaneous civil work required for the pump house, including, but

not limited to: cut-out provision, core cutting, finishing, and grouting. It also includes any

unforeseen or emergency civil work during pump dismantling and installation in the

operational pump house. All work must ensure the satisfactory installation and operation

of electro-mechanical equipment and instruments as per the tender scope/BOQ. Any

unlisted work required on site, as directed by the Engineer-In-Charge of the AMC.

15.1.1 All-in-One Computer with 27-inch FHD (1920 x 1080) Display, Intel Core i7 (13th 1 Set 1,00,799

Generation) Processor, 16 GB RAM, 1 TB SSD Storage, Pre-installed Windows

Operating System and Microsoft Office Suite 2024 or above or 365, with a dedicated

Graphics Card of minimum 2 GB.

A TOTAL OF MECHANICAL & INSTRUMENTATION WORK WITHOUT GST

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

1.1 ELECTRICAL WORKS 1 Set 3,832,000.00

LOW VOLTAGE (LT) PANEL BOARD (PMCC) :

Dismantaling of Existing LT Panel, disconnection of existing all connected cables without any damage,

considering & subject to resposibility of comlplete the reconnection work as required in all respect with

required all miscellineous rectification / modification work required due to dismentaling of existing working

LT Panel, shall be carred out as directed by Eng. in charge of AMC & SITC of PMCC Panel (50kA),

compartmentalized, Floor mounted / Stand mounted or as per site condition, operating height maximum

1800/1900 mm(As per site requirement/condition), Extensible on both ends, suitable for Manual & Auto

operation -Local & through PLC/SCADA operation as per site conditions complete in all respects as per

Tender SLD / Specification / IS and including following as minimum:

(1) INCOMER 1&2: FP, 2500A, 50 KA Microprocessor EDO ACB LSIG with inbuilt RS 485 MODBUS

communication with Digital Voltmeter with VSS, Digital PF Meter, Digital Ammeter with ASS, Resin Cast

CT- Cl : 0.5,10VA, Digital MFM with RS-485 Cl. 0.5, Breaker Control Switch (TNC), A/M switch,

Indicating lamps, Push buttons etc,. with electrical & mechanical interlocking between Incomer. (1.1) Surge

protection device, 3P + N, Type 2 for lightning/surge protection. Load sensing CT in Incomer for APFC

panel with Cl.-0.5. Constant voltage/control voltage transformer 2000VA, 415V/230V AC, with tapping +/-

5% in steps of 2.5%, 32A DP MCB & 25A Power contactor.

(2) BUS-COUPLER: One no. FP 2500A ACB (same as per Incomer)

(2.1) 2500A TPN, EC grade AL Main busbars. (Busbars size as per 50KA fault level and Temperature rise

with current density 0.8A/Sq.mm)

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

(3) TRANSFORMER FIXED COMPENSATION FEEDER (70 kVAR): 2 Set: Each comprising of rate incl in

160A FP Thermal Magnetic MCCB, Ind. Lamp, with Capacitor duty contactor, ON Delay timer, individual above price

MCCB/MCB as per Tender SLD.

(4) STAR DELTA STARTER FOR 200 KW MOTOR : 8 NOS :

Each feeder comprising of Star delta starter for 200KW or higher as per pump manufacturer recommendation

with min. 630A TPN MP MCCB (LSIG) with Adjustable O/L & Adjustable S/C protection, 300A AC3 duty

contactors (3 Nos), O/L Relay, star-delta timer, MFM with RS-485, Resin Cast CT Cl: 0.5, MPR with RS-

485, CBCT, SPP, PMU as per manufacturer recom., A/M, L/R switch, ON, OFF, TRIP Indication & Start, E-

Stop & Reset pushbutton etc. for S/D starter complete in all respects & LCS (PBS) for Actuator-valve with

16A FP MCB, open,close,stop PB, open,close,trip & L/R indication & 2 nos. terminal strip, SP MCB etc. &

LCS (PBS) for Actuator-valve with 16A FP MCB, open,close,stop PB, open,close,trip & L/R indication &

nos. terminal strip, SP MCB etc.

Note : For Actuator LCS (PBS) shall be provide potential free contact for (open,close,trip & L/R )

indication and terminal for Open,close and stop command because actautor shall be operator from

PLC Panel also in addition to LCS (PBS).

(5) 550 KVAR APFC POWER FEEDER: 2 Nos:

Each feeder comprising of 1250A TPN TM ACB, 50kA with Digital Ammeter, ASS, Breaker Control

Switch (TNC), CT, Indicating lamp, etc.complete in all respects.

(6) 63A TPN TM MCCB FEEDER : 5 Nos. (2 nos. PDB, 1no. EOT crane at Pump house, 2 nos. Spare)

Each feeder comprising of 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc.

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

(7) 32A TPN TM MCCB FEEDER : 12 Nos. (2 nos. Dewatering Pump, 4 nos. for EOT with ECH for rate incl in

Manual Screen, 1no. at EOT Crane, 5 nos. Spare) above price

Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc.

(8) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 2 sets:

Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc.

a) 4 nos. 32A 'C' curve 4P MCB feeders (for 1 no. Ind LDB, 1 no. for ICP/PLC Panel, 2 nos. Spare)

b) 1 no. 32A 'C' curve 4P MCB with Time switch,32A contactor 4P,ON lamp feeders (for Outdoor LDB)

c) 4 nos. 16A DP MCB feeders (1no. for HT Panel, 2nos. For single phase supply of X'mer marshaling box

& 1no.for Spare)

d) LCS (PBS) with 16A FP MCB, indicating lamp,Push Button, A/M,L/R switch, SP MCB, etc. (2 nos. for

(9) Multiplication relay as required for dry run protection of pumps.

NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection with adj O/L and Adj.S/c (LSIG for

MP MCCB),Extended rotary handle, Terminal spreader, Auxiliary Change over contact and trip contact as

required.2) All MFM, ACB, Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

1.2 Dismantaling of Existing LT APFC Panel, disconnection of existing all connected cables without any 2 Set 1,581,768.07

damage, considering & subject to resposibility of comlpete the reconnection work in all respect with required

all miscellineous rectification / modification work required due to dismentaling of existing working LT

APFC Panel, shall be carred out as directed by Eng. in charge of AMC & SITC of 550 KVAR at 415V,

APFC Panel,compartmentalised, Floor/Stand mounted (As per Site Requirement), extensible type on both

sides with Horizontal bus bar arrangement as per site requirement & complete in all respects as per SLD /

Specification / IS and including following as minimum:

(1.1) 1250A, TPN, 50 KA Thermal Magnetic ACB with Digital Voltmeter with VSS, Digital Ammeter with

ASS, Breaker Control Switch (TNC), Resin Cast CT- Cl : 1.0,10VA, A/M switch, Indicating lamps, Push

buttons etc. (1.2) Microprocessor based APFC Relay,144sq.mm, 16 STEP with RS 485 with minimum

operating current 10mA.

2. OUTGOING CAPACITOR FEEDER:

Capacitor feeder of following rating comprising of TPN MCCB/MCB with ON & TRIP Indication,

Capacitor duty contactor,Heavy duty MPP / gas filled capacitor unit, A/M Switch, ON Delay timer,ON / OFF

Push button, ON, TRIP, Auto & Manual Indication lamp etc. as per Tender SLD& Specification

2.1 75 KVAR FEEDER: 6 NOS

2.2 20 KVAR FEEDER: 4 NOS

2.3 10 KVAR FEEDER: 1 NO

2.4 5 KVAR FEEDER: 1 NO

2.5 2 KVAR FEEDER: 2 NOS

2.6 1 KVAR FEEDER: 1 NO

2.7. Two nos. Vacant feeder suitable for 1-75KVAr and 1-20KVAr to be provided.

NOTE: 1. cooling/exhaust fan : Heavy duty 8" Metalic Housing and Metal Impeller / Blade / Vanes of

Minimum2nos. or higher as required at the top of the panel with canopy/hood.

2. For Capacitors of rating ≤ 5 KVAr only, All types viz. APP/MPP/Gas Filled are acceptable.

1.3 SITC of Lighting Distribution Board (LDB) as under: 2 Nos. 7,568.94

SITC of 3 Phase 4 Wire 4P, double door Prewired LDB each for Indoor Lighting & Outdoor Lighting

Suitable to house :

Incoming: 32A FP, ELMCB (30mA)

Outgoing: 20A SP MCB (9 nos.) & 16A SP MCB (9 nos.)

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

1.4 SITC of Aux-Power Distribution Board (PDB) as under: 2 Nos. 14,353.11

3 Phase 4 Wire TPN, 8way Pre-wired-MOG / MOV PDB for Auxiliary accessories Load power supply (

Aux. supply & Rest spare)

Incoming: 63A TPN, MCCB

Outgoing: 8 nos. 32A 4P MCB 'C' Curve

1.5 SITC of LCS pushbutton station ON & OFF (E-stop) set complete with Enclosure, necessary mounting/ 8 Nos. 2178.82

fixing arrangement on wall / pipe support etc. to be installed near motors for remote operation, etc. as per IS

and specifications. (including structural steel) (For Pump)

1.6 SITC of stand / wall mounting type MS Junction Box, minimum 2.5mm thick, with detachable cable gland 8 Nos. 5,080.00

plate of 3mm thick, duly powder coated, with earthing terminals, steel structure stand for mounting of JB,

etc. for Jointing/Termination suitable for 1.1 kV Submersible Flexible Copper Power & control cable with

Aluminium/ Copper armoured power cable from PMCC . Scope shall include providing suitable rating

AL bus bars, Support insulators, Crimping type lugs,nuts,bolts,washers etc. complete in all respects as

instructed by E.I.C. Drawing shall be got approved before Supply & commissioning of the same. Lugs of

cables shall not be connected directly. (Structure steel for Stand shall be measured separately)

JB of minimum Size: 900mm x 900mm x 100mm or higher as required.(for Subm. Pump)

2.1(a) LOW VOLTAGE (LT) CABLES 400 Mtr. 753.00

Supply, laying , testing and commissioning of 1.1 kV, A2XFY(X)/2XWY(X) XLPE insulated (IS 7098) AL

/ Cu stranded conductor, Extruded inner sheath cables as per specification & IS.

The cable when laid outside the building shall be laid underground in trench with brick & sand protection/in

DWC pipes as per specified method and shall be laid in prepared trench/ on cable tray when laid inside the

Supply of 3.5C x 240 sq. mm. A2XFY(X) Cable (4 Runs for PMCC Panel to 2 nos. APFC Panel)

2.1 Laying, testing and commissioning of above cable 400 Mtr. 31.00

2.2(a) Supply of 3C x 240 sq. mm. A2XFY(X) Cable (2R for each PMCC Panel to 8nos. 200 kW Pump motor JB) 400 Mtr. 659.00

2.2(b) Laying, testing and commissioning of above cable 400 Mtr. 19.00

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

2.3(a) Supply of 4C x 6 sq. mm. A2XFY (X) Cable (For 1 no. Indoor LDB, 1 no. Outdoor LDB, 1no. EOT crane at 400 Mtr. 112.11

PH, 4 nos.for screen hoist, 2 nos. for Dewatering pump)

2.3(b) Laying, testing and commissioning of above cable 400 Mtr. 12.12

2.4(a) Supply of 4C x 2.5 sq. mm. 2XWY(X) Cable (8 nos. MOV at pump Delivery, 2nos. For Inlet Gate, 1 550 Mtr. 259.57

2.4(b) Laying, testing and commissioning of above cable 550 Mtr. 10.10

2.5(a) Supply of 2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For 2 nos. Tr. Marshalling Box, 2 nos. APFC 130 Mtr. 166.65

2.5(b) Laying, testing and commissioning of above cable 130 Mtr. 10.10

2.6(a) Supply of 5C x 2.5 sq.mm. 2XWY(X) Cable (For 8nos. Pump-Motor LCS) 250 Mtr. 210.00

2.6(b) Laying, testing and commissioning of above cable 250 Mtr. 10.50

2.7(a) Supply of 10C x 2.5 sq.mm. 2XWY(X)Cable (2 Run Tr. to HT Panel control cable) 150 Mtr. 480.00

2.7(b) Laying, testing and commissioning of above cable 150 Mtr. 24.00

2.8(a) Supply of 12C x 1.5 sq.mm. 2XWY(X) Cable (8 nos. MOV at pump Delivery, 2nos. For Inlet Gate) 500 Mtr. 350.00

2.8(b) Laying, testing and commissioning of above cable 500 Mtr. 17.50

3.1 CABLE END TERMINATION AND CONNECTION: 16 Nos. 838.00

SITC of Double compression Ni-Plated brass cable glands and crimping type Bimetallic lugs / sockets with

necessary tools and equipment's as specified in specifications and IS. The glands and lugs / sockets shall be

suitable for cable size and type mentioned below & as per specifications.

1) Earthing the glands and armouring with earthing clamp and jumper and also connecting to common earth

2) The job also includes, if necessary, supply & fixing of extension busbar of same material on MCCB or

panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size

cable to lower size unit. The job also includes earthing the glands and armour of the cable with common

earth bar or flexible copper mesh.(Cable termination qty. shall be as per site requirement)

SITC of 3.5C x 240 sq. mm. A2XFY(X) Cable (4 Runs for PMCC Panel to 2 nos. APFC Panel)

3.2 Same as above But, 3C x 240 sq. mm. A2XFY(X) Cable (2R for each PMCC Panel to 8nos. 200 kW 32 Nos. 825.00

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

3.3 Same as above But, 4C x 6 sq. mm. A2XFY (X) Cable (For 1 no. Indoor LDB, 1 no. Outdoor LDB, 1no. 18 Nos. 111.00

EOT crane at PH, 4 nos.for screen hoist, 2 nos. for Dewatering pump)

3.4 Same as above But, 4C x 2.5 sq. mm. 2XWY(X) Cable (8 nos. MOV at pump Delivery, 2nos. For Inlet 22 Nos. 110.00

Gate, 1 no.for ICP)

3.5 Same as above But, 2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For 2 nos. Tr. Marshalling Box, 2 nos. 8 Nos. 65.65

3.6 Same as above But, 5C x 2.5 sq.mm. 2XWY(X) Cable (For 8nos. Pump-Motor LCS) 16 Nos. 180.00

3.7 Same as above But, 10C x 2.5 sq.mm. 2XWY(X)Cable (2 Run Tr. to HT Panel control cable) 8 Nos. 240.00

3.8 Same as above But, 12C x 1.5 sq.mm. 2XWY(X) Cable (8 nos. MOV at pump Delivery, 2nos. For Inlet 20 Nos. 250.00

4.1 CABLE TRAY 100 Mtr. 694.88

SITC of G.I. (hot dip galvanised ) Ladder type medium duty (2mm thick) Cable Tray with necessary bends,

tees, reducers, covers and clamps for fixing. All material shall be Hot dip galvanised. All hardware shall be

Electro-galvanized/ SS 304 complete in all respects as per Specification. And including all accessories.

600 x 100 mm - Ladder type

4.2 300 x 100 mm - Ladder type 150 Mtr. 556.51

4.3 150 x 50 mm - Ladder type 300 Mtr. 276.00

5.1 CHEMICAL EARTHING SYSTEM 8 Set 10,593.89

SITC of Maintenance free chemical earthing (copper) with earthpit of minimum bore size dia. 225mm Safe

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion

free Pipes having Outer pipe dia of 48 mm having 250 Micron copper plating, Inner corrosion free Hot dip

galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia

with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high

charge dissipation suitable for electrical installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of

Back filling compound.. (2 nos. Each for 11 KV HT Panel,Neutral of Tr.-1 & 2, ICP panel)

NOTE: Earthing Resistance value & date shall be painted on the chamber cover.

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

5.2 SITC of Maintenance free chemical earthing with earthpit of minimum bore size dia. 225mm Safe Earthing 10 Set 7,095.25

Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Hot

dip Galvanised (min 150 Microns) Pipes having Outer pipe dia of 76 mm , Inner corrosion free Hot dip

galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia

with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high

charge dissipation suitable for electrical installation & 3Mtr. length of Pipe with two nos. 25Kg. bag of Back

filling compound. (2 Nos. Each for Tr.1 & Tr. 2 Body, 2nos. for LT panel, 2nos. for Pump motor set & 2nos.

for all elect. Equipments)

NOTE: Earthing Resistance value & date shall be painted on the chamber cover.

6.3(a) SITC of 50mm(w) x 8mm(T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing 936 Kg. 77.77

using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when

laid outside the building & interconnection with earth pit & all electro-mechanical equipments.

(50X8 G.I Strip wt.3.12 kg/m, 3.12x300Mt.=936kg.)

6.3(b) Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes as required, HOT dip galvanized GI Strip 120 Kg. 77.77

including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation

& refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical

equipments. (25X3 G.I Strip, 0.6 Kg/m, 0.6x200Mt.=120Kg.)

6.3(c) Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes Copper Strip including supply & fixing of 38 Kg. 794.87

bolts, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside

the building & interconnection with earth pit & PLC Panel (25X3 Cu. Strip, 0.761 Kg/m, 0.761 x

Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to individual eqp. Bitumen shall be

used at the place of joint/welding. (For PLC Panel to Earthing)

6.3(d) Supply, laying and erection of 40mm(w) x 6mm(T) etc. sizes Copper Strip including supply & fixing of 113 Kg. 794.87

bolts, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside

the building & interconnection with earth pit & Tr. nutral. (40X6 Cu. Strip, 1.88 Kg/m, 1.88 x

60mtr.=112.8Kg.)

Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to individual eqp. Bitumen shall be

used at the place of joint/welding.

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

6.3(e) SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, LCS, etc.) 31 Kg. 77.77

(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 300Mt.=30.9)

7.1 INTERNAL WIRING 100 Mtr. 78.78

SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC insulated ISI marked flexible stranded

copper conductor wires with medium class min. 25mm. dia. Rigid PVC pipe and accessories to be erected

concealed in / to be run on surface / wall / ceiling with following sizes as mentioned below. The unit rate

wirings shall be with connector, PVC junction box, wires, holder, ceiling rose, angle holder, switch, sockets,

switch board, brass chromium / cadmium plated machine screws, phase and neutral wires, green Earth

continuity wires etc. as required to complete wiring from LDB panel to the final outlet termination points.

The wiring shall be as per IS:732, IS:4648 and as per tender specification / IS.

(a) SITC of Mains wiring with 3 wire 1.5 sq.mm.

7.2 As per Sr. No.-9.1 (b) SITC of Mains wiring with 3 wire 2.5 sq.mm as per tender specification & IS. 150 Mtr. 96.96

7.3 As per Sr. No.-9.1 (c) SITC of Mains wiring with 4 wire 1.5 sq.mm as per tender specification & IS. 200 Mtr. 86.86

7.4 As per Sr. No.-9.1 (d) SITC of Mains wiring with 4 wire 2.5 sq.mm as per tender specification & IS. 250 Mtr. 120.19

7.5 SITC of Point wiring for Light / fan / Bell / Primary Point with 2nos. 1.5 sq. mm & earth wire of 1.5 sq. mm 58 Nos. 329.26

(green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multistrand copper wires , pipe to be

erected concealed in flushed on wall / ceiling, complete with 6A Tissino Type ISI marked flush type switch /

bell push & accessories erected on metal / PVC Box covered with 3 mm thick PC (Polycarbonate) / Acrylic

sheet with necessary lamp holder / ceiling Rose / H. D. connector as directed with medium class Rigid PVC

pipe & accessories.

7.6 SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) 5 Nos. 290.88

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid

PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm

thick PC(Polycarbonet) / Acrylic sheet.

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

7.7 SITC of 6/16A independent Plug with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm 5 Nos. 570.65

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium

class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin

socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered

with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

7.8 SITC of Single Phase 20A 3 Pin Matal clad Industrial Type Socket with plug top and 20A SPMCB, 5 Nos. 820.00

suitable for flush mounting, in 16 SWG MS box of suitable size and covered with 3 mm thick electrical grade

hylam sheet or eqivalent ISI marked Electrical grade bakelite sheet and earthing with 2.5 sq.mm insulated

copper wire run inside the conduit including interconnections etc. complete as required.

7.9 SITC of One 300/380 mm dia. Ex fan 16A independent Plug point near Ex. Fan with 2nos. 4 sq.mm Cu. 5 Nos. 570.65

Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall /

ceiling, complete with ISI marked 3Pin socket and tissino type switch erected with earth continuity

connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. Plug

point shall be near Ex.Fan.

7.10 SITC of 380mm sweep 1400 R.P.M exhaust fan, capacitor type, having double ball bearing, M.S.blades, 5 Nos. 3,082.52

mounting frame, forearms, suitable to operate on 230V,50 HZ AC supply conforming to IS: 2312.Fan shall

be painted with epoxy grey colour controlled by one 6 A flush type switch on board and 6A plug point near

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

8.1 LED LIGHT FIXTURES & LIGHTING: 20 Nos. 589.84

SITC of Indoor wall mounting 20Watt or up to 25% higher wattage LED 4 feet Tube Light indoor

fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high

U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

(Each fitting required LM-79 & LM-80 Certificates)

Tube Light with integral / non-integral driver, Surge-4KV,IP-20, 4 feet, Cat-III

8.2 Item description as per Sr. No. 8.1.1 SITC of 7 watts LED Lamps integral type,cool white with PC diffuser 5 Nos. 220.18

suitable for B22 LAMP holder.

8.3 1200mm sweep ceiling fan, capacitor type, having double ball bearing 450mm down rod, canopies, shackle, 3 Set 1,596.81

rubber bush, blades, electronic speed regulator, suitable to operate on 230V,50Hz AC supply conforming to

IS: 374/1979.Fan shall be painted with white colour.

8.4 SITC of 70W LED Surface / Wall mounted LED Flood Light fittings with High power White LEDs 20 Nos. 6,088.28

wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT 5000 K to 5700K,

Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80 certificates)

(IP-65), Surge -4KV Cat-III

For Indoor use: ( Pump House)

8.5 SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms x 20 cms x 3 30 Nos. 558.53

mm thick M.S. base plate, erected on wall or corner for mounting luminaire with necessary hardware

materials duly painted for wall mounting indoor flood light fixtures on Wall of Buildings & post top lantern.

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

9.1 EXTERNAL LIGHTING (Flood LIGHT): 10 Nos. 7,266.95

SITC of 100W LED Wall mounted LED Flood Light fittings with High power White LEDs wattage of

1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT 5000 K to 5700K,

Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80 certificates)

(IP-65), Surge -4KV Cat-III

For Outdoor use: (area lighting)

10.1 SAFETY ACCESSORIES 1 No. 8,671.86

SITC of following safety accessories complete with necessary fixing brackets, other accessories and tools etc.

as required to complete the job.

Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg capacity with necessary clamps made

from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete.

(For 1 no. for LT Room cum Pump House)

10.2 Supplying of standard first AID box with antiseptic cream, medicine for use on wounds due burn, crepe 1 No. 299.97

bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user,

scissors, antiseptic solution (Savlon or similar) etc. (1 no. for LT Room cum Pump House)

10.3 Supply & fixing of printed instruction (First Aid) Chart both in English and Gujarati and duly framed with 1 No. 130.29

front glasses, for treatment of person suffering from electric shock. (1 no. for LT Room cum Pump House)

10.4 Supplying & fixing of floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in 3 Nos. 1,798.81

length, 900 mm height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs,

welded with 4 hooks and duly painted with one coat of red lead and two coats of approved enamelled silver

paint. (HT Panel, Tr. 1&2)

10.5 Supply and fixing of 20 W LED emergency light with maintenance free battery for 3 hours operation 1 No. 2,540.00

during mains power failure.

(1 no. for LT Room cum Pump House)

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR EXISTING SPS AT

AMBEDKAR - SABARMATI RIVERFRONT OF AMC.

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

10.6 Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness 2mm as per IS:15652 and with 20 Sq.mt 1,027.17

good electrical insulation property for 1.1KV/3.3KV as per site requirement. (For LT Panel) r.

10.7 Providing pair of rubber hand gloves ISI make suitable for working on 22 KV supply 2 Nos. 214.12

11.1 Overhaul of the existing 1600KVA Distribution Transformer 2 Lot 38,683.49

The scope includes a Overhauling of complete transformer with IR Test, BDV test of Oil, Ratio test,

magnetizing current test including changes of complete oil, choke sheet, bushing oil sheet, gaskets, packings,

dehydrating of windings & cores & tighting of nut, bolts, insulator & insulator rods/ studs., Existing LT cable

shifting works as required at sites etc as directed by Engg-in-charge of client.

(X'mer oil supplied by AMC) Any unlisted work required for the satisfactory completion and operation of the

Distribution Transformer, as directed by the Engineer-In-Charge of the AMC.

B TOTAL OF ELECTRICAL WORKS WITHOUT GST

SCHEDULE OF QUANTITIES AND RATES FOR SITC OF ELECTRO-MECHANICAL WORKS WITH 3 YEARS O&M FOR EXISTING

AMBEDKAR SPS - SABARMATI RIVERFRONT OF AMC.

(C) OPERATION & MAINTENANCE

The works of this schedule comprises of the supply of all spare parts as required including the supply of all labour (including reliever to ensure presence of specified

type and no. of manpower per shift), materials, consumables (except electrical power), equipments, tools and tackles and comprehensive operations and

maintenance of AMBEDKAR SPS of AMC during the 3 Year of O & M from the date of successful commissioning as shown in table below.

Item No. Rate per Amount

Item of Work Duration Unit

1.0 Staff Salary

1.1 During First year 12 Months 1,13,226

The work of this schedule comprises of deployment of all operating crew/labour

(including reliever to ensure presence of specified type and no. of manpower per shift) at

Ex. SPS of AMC during 3 Years of O & M from the date of successful commissioning as

shown in table below.

Total staff salary for First years for Operation and security, repairing and maintenance for

the complete year period.

a) Pump operator - (ITI-Wireman/Eletrician) (3 nos - One for each shift of 8 hrs.)

b) Security cum Helper - (10th pass-of age < 45 years) (3 nos. - One for each shift of

1.2 Total of Manpower for Second Year 12 Months 1,18,888

1.3 Total of Manpower for Third Year 12 Months 1,24,833

2.0 Comprehensive Maintenance

2.1 Comprehensive repairing, supply of spares and maintenance of entire works in existing 12 Month -

SPS alongwith administration & management charges including running office, cost of

lubricants, consumables, spares, tools & tackles, statutory periodical approvals & testing

of eqipment etc. required in all except supply of electric power and sewage during O&M

period for First Year of O&M period.

(Covered under Defect Liablity Period for First Year)

Item No. Rate per Amount

Item of Work Duration Unit

2.2 Total of Comprehensive Maintenance, repairing, Spares, Consumables etc. for entire 12 Month 99,744

works in existing SPS including Proposed as well as all existing Electro-Mech.

equipment’s, for second year of O&M period.

2.3 Total of Comprehensive Maintenance, repairing, Spares, Consumables etc. for entire 12 Month 1,04,732

works in existing SPS including Proposed as well as all existing Electro-Mech.

equipment’s for Third year of O&M period

3.0 Operation, Comprehensive repairing and maintenance for 10 months (during 10 Months 1,48,170.50

Upgradation Phase) of existing SPS during installation, testing commissioning of

Proposed Electro-mech. & Inst. equipment’s etc.

C TOTAL OF O&M FOR 3 YEARS WITHOUT GST