Provision of Civil Works and Allied Furnishing Work for the DRDO Guest House at SASE HQ, Manali

Amount

Civil Works

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). a) Ordinary cement without any pigment

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : a) Old work (one or more coats)

Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade : a) One or more coats on old wood work

Finishing walls with Acrylic Smooth exterior paint of required shade : a) Old work (Two or more coat applied @ 1.67 ltr/10 sqm or existing cement paint surface)

Dismantling doors, windowds and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below.

Providing and fixing angle iron frames or doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-Charge,

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (+ 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x 100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer-in-charge.

35 mm thick factory made Solid Panel PVC Door shutter, made out of single piece extruded solid PVC profiles, 5 mm (+ 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mm x 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm x 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S rectangular pipes bracket of size 190 mm x 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted inthe door as panel, all complete as per manufacturer's specification and direction of Engineer-In-Charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200 x 10 mm.

Providing and fixing of aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm.

Providing and fixing of aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. Twin rubber stopper.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. a)With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6

Furnishing Items

Supply & Fixing of Curtains with lining duly stiched for door size 2.50 mtr with three pleats in each top & bottom folding 15cm etc all complete fabric quality as approved by EM.

Bed Sheet Double (Set of One Bed Sheet (Size 228x254cm & Two Pillow Cover (Size 72x51cm, each)

Bed cover double Bombay Dyeing or eqvlt.

Bath Towel Large BD size 75 x 150 mm

Pillow Foam Bombay Dyeing 27x17 cm

Hand Towel

Doormat Rubber of Good Quality

Bathmat Woolen of Good Quality

Dining Mat plastic Good Quality

Bed side carpet of size 5' x 2' feet

Cups & Saucers BC with DRDO Logo

Full Plate BC size 27 cm with DRDO Logo

Quarter Plate BC 17 cm with DRDO Logo

Donga with lid make BC with DRDO Logo

Dinner Set (35 pieces) BC

Morning Tea Set with Tea Pot BC

Glass Tumbler borosil large

Glass Tumbler borosil small

Soup Bowl set with spoon BC

Gas stove double burner make Maharaja / Prestige / Sunflame

Flower vase porcelian

Flask 1/1.5 ltr cap make Milton/Cello or eqvl.

Supply of 42" full HD LED Colour Video display equipment of make Sony/ Samsung or eqvt. with connecting chords, RCA adaptors etc. All complete

Table Lamp LED Philips/ Orpat or eqvt.

Heat Convector Usha/ Lexus or eqvt.

Supply & fixing Trim Clipon LED Panel light fitting, 18 watts Led Recessed Luminaire for false celing complete, Make: Havells/Philips etc. suitable for recess-cum-surface mounting.

Supply of White Board 4x6 feet made out of ceremic steel with Engraving/Porcelain Enamel Steel with white dry erase writing board including necessary hardware fittings etc. all complete.

Schedule of Credit: The amount quoted in the ser. No. 3.01 to 3.02 will be deducted from the quoted amount in the ser no. 1 to 2, as credit of schedule of itmes:

Old shutter with frame

Scrap Brass

ARP ASSOCIATES PRIVATE LIMITED

LIRA CONSTRUCTIONS PVT LTD