Repairs and Maintenance of office building in Market Yard, Ipur of A.M.C, Ipur Palnadu District

Dismantling doors, windows including cost and conveyance of all materials and all labour charges etc., completed.

Dismantaling and removing of collapsible gate including cost and conveyance of all materials and all labour charges etc., completed.

Removing of Existing Damaged A.C/G.C.I. Sheets including stacking the sheets etc., complete for finished item of work.

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH.

Labour charges for refixing of old Window including cost and conveyance of all materials and all labour charges etc., completed.

Brick Masonary in CM (1:6) Prop. With Ordinary Portland Cement (Conforming to IS:1489 Part - I ) using 2nd. Class traditional bricks of size 230 x 110 x 70 mm including cost and conveyance of all materials to site,mixing of cement mortor, built walls, curring, scaffolding charges, hire and operational charges of machinary, water leads and lifts etc., complete for finished item of work.

Plastering 12mm thick in single coat in CM(1:5) for even surfaces including cost and conveyance of all materials like cement, sand (screened), water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work

Painting with plastic emulsion paint of grade-1 standard make to exterior / interior faces of Old walls two coat of approved make shade and colour including cost and conveyance of materials like Plastic Emulsion paint, to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, two coats of Plastic Emulsion etc., complete for finished item of work.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of avg 1to 2 mm thick ness over plastered surface to prepare the surfaace even and smooth after throughly brushing the surface to remove all dirt and remains loose powdered materials ,applying emery paper sand the surface,clean and wipe off loose dust,applying knifing past filler by putty knife /musline pad,air dry for 2to3 hours, sand with 180and 320 nos emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational ,incidental labour charges etc completed for finished item of work for internal walls.

Painting two coats with synthetic enamel paint for New Iron work of 1st grade of approved brand and colour over primary coat including cost and conveyance of all materials labour charges for cleaning, removing the dust, rust and other foreign particles by sand papering including cost of brushes, sand paper, scaffolding charges including all incidental and operational charges etc., complete for finished item of work as per standard specifications and as directed by engineer-in-charge at site.

Painting two coats with synthetic enamel paint for old Iron work of 1st grade of approved brand and colour over primary coat including cost and conveyance of all materials labour charges for cleaning, removing the dust, rust and other foreign particles by sand papering including cost of brushes, sand paper, scaffolding charges including all incidental and operational charges etc., complete for finished item of work as per standard specifications and as directed by engineer-in-charge at site.

Painting two coats with synthetic enamel paint for old wood work of 1st grade of approved brand and colour over primary coat including cost and conveyance of all materials labour charges for cleaning, removing the dust, rust and other foreign particles by sand papering including cost of brushes, sand paper, scaffolding charges including all incidental and operational charges etc., complete for finished item of work as per standard specifications and as directed by engineer-in-charge at site.

Supplying and fixing GYP Board suspended regular single layer false ceiling (GS MFSC-4-1 Gyp board conforming to IS 2095-1982 fixing to Gyp steel GI perimeter channels of size 20mm x 27mm x 30mm (web) of 0.55mm thick along the perimeter of ceiling screw fixed to brick work / partition at 6.10mm c/c and suspending the frame work using intermediate channels (45mm x 15mm x 15mm x 0.9mm) from soffit at 1220mm c/c with ceiling angle (25mm x 10mm x 0.55mm) fixed with GI cleat and steel expansion fasteners and connecting clip to the ceiling channels (with knurled web of 51.5mm x 26mm x 10.5mm x 0.55mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5mm tapered edge Gypboard with 25mm drywall screws at 230mm c/c and jointing and finishing using flush look including filling the tapered and square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Ldia Gypsum Ltd specification as per standard specification and as directed by the departmental officers.

Supply and fixing of aluminimum Partition partly glazed as per drawing using standard powder coated anodised aluminimum sections of 63.50 x 38.10 x 1.21 mm thick and 63.50 x 38.10 x 1.17 mm thick fitted with pin headed glass 5 mm thick glazing fitted with suitable Aluminimum glazing clips and aproved brand silicon sealant including cost and conveyance of all materials labour charges for manufacturing fixing in position using wooden blocks and sheet metal screw etc. to complete for finished item of work as approved by Engineer-in-charge.

Supply, fabrication and fixing of alluminium door shutter of size 0.90 x 2.10 mtrs by using standared anodised alluminium sections of size 47.62 x 44.45 x 1.18 mm thick for vertical member and for top & Middle members of size 49.91 x 44.45 x 1.60 mm thick (4574 Section) and bottom 100.00 x 44.45 x 2.00mm thick (4682 Section) and necessarry glazing plates and providing 9mm thick MDF board bottom and top fixing with 5mm thick pin headed glass and providing 3 no's of 125 mm long alluminium hinges, 150 mm long alluminium handles 1 no's, 100mm long door stoper-1 no, mortice Lock 1 no,Providing and fixing Cast Iron Body Bottle Type Hydraulic Door Closer including cost of glazing clips, rubber beadings, fixers, screws, labour charges etc., complete for finished item of work.

Supply and Fixing of WPC door of size 1.05 x 2.10 mtrs Full frame made with WPC door frame of size 0.10 x 0.0635 mt for allround 28mm thick WPVC door shutter of size 0.91 x 1.94 including fixtures like 125mm long steel hinges 3 No's, Aluminium Aldrop (IS:2681) 200 mm long 2 No's, 150mm long steel handles 1 No,and door stopper 1no including cost and conveyance of all materials and all labour charges for fixing in position etc., complete.

Supply and Fixing of WPC door of size 0.75 x 2.10 mtrs Full frame made with WPC door frame of size 0.075 x 0.045 mt for allround 28mm thick WPVC door shutter of size 0.64 x 1.74 including fixtures like Stainless Steel Butt hinges (IS:12817)- 100 mm Long 3 No's, Aluminium Aldrop (IS:2681) 200 mm long 2 No's, 150mm long steel handles 2 No's including cost and conveyance of all materials and all labour charges for fixing in position etc., complete.

Roofing will be provided with 0.50 mm galvanized / pre painted GI profiled sheets fixied to the purlines with 14 size self drilling screws with neoprene washer. Side laps are swithched with self taping / drilling screws. End laps are to be cealed with 25/3 mm butyl tape. The sheets are provided with aniti capillary grove.

Supply and fixing of Galvanized iron fly proof wire mesh not less than 20 guage and rabbit wire mesh (chicken mesh) of not less than 30 guage with wooden reaper beading alround airvents or windows including cost and conveyance of all meterials and all labour charges for fixing to frame ect., complete.

Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105.

Supplying and Fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap with low down porcelain flushing tank 10 Lit Capacitywith internal components including cost and conveyance of all materials and all labour charges etc., Complete.

Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock (BMW-D.24).

Prince/ Sudhakar make or equivalent quality PVC / SWR pipes & fittings( asper ISI standards) 6kg/cm2 for various diameters etc., complete for finished item of work.

For 110 mm PVC Pipe

For 75 mm PVC Pipe

S & Fangle stop cock 12.7 mm dia first quality Indian Make heavy duty including cost and conveyance of all materials and all labour charges completed.

Supplying & Fixing12.7 mm dia NP push cock Ist quality including cost and conveyance of all materials and all labour charges completed

Supplying & Fixing of Nylon Conections of length 1.50mt including Cost and Conveyance of all materials and all labour charges etc., complete.

Supply and fixing of health faucet including cost and conveyance of all materials and all labour charges etc., complete

Supplying & Fixing CP Short body bib cock fancy type deluxeheavy duty 12.7 mm dia Indian makeincluding cost and conveyance of all materials and all labour charges etc., complete.

S&F 12.7 mm dia NP pillar cock heavy duty Ist quality Indian make including cost and conveyance of all materials and all labour charges etc., complete.

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 including cost and conveyance of all materials and all labour charges completed

Supply, Transportation and fixing of storage / Pressure type Vertical/Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with Glass/SS tank and ABS plastic body of 25 Ltrs capacity to withstand up to 6.5bar of water pressure including all standard accessories and dead weight pressure reducing valve on outlet side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and alllabour charges etc., complete.

Supply of split AC unit 2.0 TR 5 star capable of delivering 21600 BTU/hr and above with operating on refrigerant R-32/ R-410A, COP not less than 4.5 Makes : As per list of recommended brands as category I with high wall mounted indoor unitand outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.including cost and conveyance of all materials and all labour charges completed.

Supply of split AC unit 1.5 TR 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R-410A, COP not less than 4.5 Makes : As per list of recommended brands as category I with high wall mounted indoor unitand outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.including cost and conveyance of all materials and all labour charges completed.

Installation of Split Air Conditioners including cost and conveyance of all materials and all labour charges completed

Supply of 4.0 KVA Stabilizer. Makes:V-Guard / Real Guard / Uni Stab / ITL. including cost and conveyance of all materials and all labour charges completed.