Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC | ₹19.1 L | L1 | Accepted-AOC l1 |
| 2 | L2₹19.1 LRejected-AOC | ₹19.1 L | L2 | Rejected-AOC l2 |
| 3 | L3₹19.3 LRejected-AOC | ₹19.3 L | L3 | Rejected-AOC l3 |
| Sl No | Description | Qty | Unit | krishnankutty k L2 | ANSEL P G L3 | SATHYAKUMAR V L1 |
|---|---|---|---|---|---|---|
| 1.00truss work | ||||||
| 1.00 | 50.4.1.1:Providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc. | 0.38 | cum | 9,047.27 ₹3,419.87 | 9,138.66 ₹3,454.41 | 9,038.13 ₹3,416.41 |
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 5.76 | sqm | 382.3 ₹2,202.05 | 386.16 ₹2,224.28 | 381.91 ₹2,199.80 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 2,211 | kg | 192.33 ₹4.3 L | 194.27 ₹4.3 L | 192.13 ₹4.2 L |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 2,180.7 | kilogram | 115.52 ₹2.5 L | 116.69 ₹2.5 L | 115.41 ₹2.5 L |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 447.9 | sqm | 833.72 ₹3.7 L | 842.14 ₹3.8 L | 832.88 ₹3.7 L |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 38.9 | metre | 559.4 ₹21,760.66 | 565.05 ₹21,980.45 | 558.83 ₹21,738.49 |
| 1.01 | OD495128/2025-2026:Providing and fixing PVC SQUARE TYPE rain water gutter of size 20x20cm with
iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary
connections
with rain water pipes complete | 90 | metre | 492.96 ₹44,366.40 | 497.94 ₹44,814.60 | 492.46 ₹44,321.40 |
| 1.01 | OD495180/2025-2026:providing and fixing heavy duty fibre cement board 12mm thick for floring as per the instruction of site engineer(cost of frame work paid to be seprately | 225.45 | sqm | 1,108.12 ₹2.5 L | 1,119.31 ₹2.5 L | 1,107 ₹2.5 L |
| 1.01 | 15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. | 1.44 | cum | 3,635.17 ₹5,234.64 | 3,671.89 ₹5,287.52 | 3,631.5 ₹5,229.36 |
Updated dates
Tender Value
₹19.3 L
EMD Value
₹48,339
Closing Date
3 Mar 2026, 2:00 pmClosed
Assistant Executive Engineer,
OFFICE OF THE EXECUTIVE ENGINEER, LID EW, PALAKKAD MUNICIPALITY
GENERAL PMC PRO NO 547 2025 26 Provision of auxiliary facilities at the Womens Self-Employment Training Center General Civil Work
2026_LSGD_839581_1
24/AEE/LID EW/PMC/2025-26
Open Tender
Civil Works - Others
palakkad municipality
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹48,339
Yes
13 Mar 2026
23 Feb 2026
3 Mar 2026
23 Feb 2026
3 Mar 2026
23 Feb 2026
truss work
50.4.1.1:Providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc.
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
OD495128/2025-2026:Providing and fixing PVC SQUARE TYPE rain water gutter of size 20x20cm with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete
OD495180/2025-2026:providing and fixing heavy duty fibre cement board 12mm thick for floring as per the instruction of site engineer(cost of frame work paid to be seprately
15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
room finishing
11.39:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1414821.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1414821.xls
BOQ • 0.30 MB
merged.pdf
Tender Documents • 1.97 MB
affidavit.pdf
Tender Documents • 0.34 MB
epayment.pdf
Tender Documents • 0.34 MB
integritypact.pdf
Tender Documents • 0.33 MB
preliminaryagreement.pdf
Tender Documents • 0.35 MB
formoftender.pdf
Tender Documents • 0.34 MB
Download all tender documents and submit your bid