Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹36.3 L+₹77,731.34 (2.19%)Rejected-AOC | L2 | Rejected-AOC Reject | |
| 3 | L3₹40.5 L+₹4.9 L (13.9%)Rejected-AOC INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L3 | Rejected-AOC Reject | |
| 4 | L4₹45.1 L+₹9.6 L (27.0%)Rejected-AOC | L4 | Rejected-AOC Reject |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
22 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
SPL REPAIRS TO BLDG P186 YN LINE AND PROVN OF CEMENTED GRILL P10 AT ZONE B AHMEDABAD
2022_MES_555687_1
8286/E8
Open Tender
Civil Works
Works
270 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹78,000
Yes
1 Dec 2022
3 Oct 2022
24 Oct 2022
3 Oct 2022
22 Oct 2022
8 Oct 2022
3 Oct 2022 - 8 Oct 2022
Amount
Demolition of brick work built in cement mortar of any description complete.
Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete.
Demolition of cement concrete of any description and in any position not otherwise complete.
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete.
Dismaintling of 75mm to 100mm bore cast iron pipe jointed in cement mortar and taking out of trenches or any description and any position complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete.
M&L for PCC 1:1½:3 nominal mix type A-0 using 12.5 mm graded stone aggregate mixed with water proofing compound as per manufacture instruction on bottom of sunken portion with slope towards spout including applying two coat of polymeric base chemical in the top surface of PCC and side of sunken portion complete. (Note : WPC shall be measured and paid seperately)
M&L for PCC 1:2:4 type B0 using 12.50mm graded stone aggregate in roof etc. as levelling coarse etc. complete
M&L for PCC 1:5:10 type E-2 (using 40 mm graded brick aggregate) as in lean concrete in sunken floors complete.
M&L for PCC (1:3:6) Type C-2 with using 40mm graded stone aggregates as in platform for PVC tank complete.
M&L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate) as in benching, copings, bed block for filing hollow space of steel chowkhats including weathering, slightly rounded or chamfered angles & throating including necessary form work complete.
M&L for PCC 1:3:6 type B 1 using 20 mm graded agg as in copping incl. necessary form work & finishing exposed surface of concrete complete
M&L for providing 35 mm thick pre cast cement concrete louverd and jallies in 1:2:4 type Bo (measured solid) &set in CM 1:4 including all moulding and frame work complete.
M&L for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete.
Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete.
M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete.
M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete .
M&L for Brickwork with fly ash bricks straight or curved on plan exc 6m mean radius, built in CM (1:6) complete
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete.
M&L Marble work any shed other than white or black 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete.
M&L for Use and waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces complete
Taking down chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame) complete.
Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site complete.
S&F factory made 30 mm flush shutter, solid coare construction, with block board core and plywood face panel, commercial type on both side etc. complete
S&F factory made 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats complete
S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete.
M&L for Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specification and drawing complete.
S&F 125 mm long Aluminium anodised barrel tower bolts complete.
S&F 200 mm long Aluminium anodised barrel tower bolts complete.
M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete .
S&F Butt hinges, Medium weight, cold rolled mild steel, and fixed 100mm size complete
S&F stainless steel butt hinges medium weight 100 mm long complete.
S&F 300 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete.
S&F 100 mm size aluminium anodised door handles complete.
S&F 150 mm size aluminium anodised door handles complete.
S&F in repair 25 mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.fixed to wall with bracket & knobs complete.
S&F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete.
S&F of mild steel work such as window guard bars and similar work conforming to Fe – 290 Grade – E 165 complete.
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E- 165) complete .
S&F mild steel angle iron work as in doors frames, chajja hollow square sections conforming to 410W(Gde E-250) quality-B including fixing of holdfast and hinges complete.
S&F mild steel welded fabric of weight exe 2.5 Kg but n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete.
S&F powder coated anodised Aluminium alloy sections 3 track sliding shutters windows with frames Series-B (18 mm) and duly fitted with & including neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements etc. complete.
S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete.
S&F powder coated anodised Aluminium aloy sections windows with frames Series-B (18mm), side Hung shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass panes 4.80 mm nominal thickness or with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc complete.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE and having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete.
M&L filling surface cracks not exc 5 to 7 mm wide with polymer modified cracks filler all as per manufacturer instructions complete.
Removing of existing unserviceable water proofing treatment with PCC padding, taking down cement plaster etc of any description and cleaning of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete.
M&L for water proofing treatment to non assessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with water proofing compound @3% by weight of cement & applying one coat of bitumenous primer @ 0.30 kg/sq & Laying APP based polymeric modifed membrane with polyster non woven reinforced of weight not less than 3kg/Sqm of 3 mm thick with polythene finished sealing with side overlaps of 75mm & 100 mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint 0.2 litre /sqm complete. Note: WPC shall be measured and paid sepratly
M&L machine cut Kota stone slab 20-25 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete.
M&L machine cut Kota stone slab 20-25 mm thick as in riser to step including 10 mm thick rendring in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete.
M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc. complete
M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete.
Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete.
M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in wall/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:3) complete.
M&L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.6 Sqm but n exceeding 0 .11 Sqm, set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:4 in floors complete.
M&L for Non - skid Ceramic tiles light shade 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick in CM 1:4 screed bed complete.
M&L for Non - skid Ceramic tiles light shade 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:3) complete.
Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete
M&L for rendering on faces of brick work in two layers i.e., 10 mm thick in CM 1:6 and top layer of 5 mm thick in CM 1:4 mixed with water proofing compound in top layer @3% by the weight of cement or as per manufacturer's instructions finishing the surface even and smooth without using extra cement complete.
M&L for 15mm thick rendering on vertical side of sunken floor of brick/ concrete surfaces in CM (1:3) mixed with water proofing compound as per manufacture instruction and finished even and smooth without using extra cement complete. (Note : WPC shall be measured and paid seperately)
M&L 10 mm thick rendering in cement mortar 1:6 on fair face of brick work or concrete surface finishing the surface fair and even without using exra cement complete.
M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces of block masonary or concrete surfaces in 1:6 finished even and smooth
M&L for rendering 10mm thick plastering in CM (1:4) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement complete.
M&L preparing newly plastered or unplastered surface of wall and applying three coats of white washing complete .
M&L complete removal of existing treatment and applying three coat of white washing on wall surface complete.
M&L preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer after applying 1.5mm average thk wall care putty to wall surface complete.
Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer after applying 1.5mm average thk wall care putty to wall surface & preparation of wall surfaces complete.
M&L for prepararion of new plsatered surfaces of wall and apply two coat of cement base paint over a coat of Alkali resistant primer complete.
M&L guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner @ 2% by weight of cement in equal proportion using short crete pumps and allied equipment in thickness 30 mm all as per manufactureres instruction (Upto 5 mtr height) including necessary chiping/taking down loose concrete along with application of rust remover for old rusted bars and rebar if required followed by application of anti corrosive paint over old /rebar as per manufacturers instruction complete .
M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete.
M&L complete removal of existing treatment of ceiling and applying three coats of white washing complete .
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
M&L for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete.
M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete.
Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site complete.
Supplying and laying of 20 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches, laid concealed in floor or wall including all fittings suitable for fixing of plumbing fixture complete.
Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site complete.
S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete.
S&F in replacement 50 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall for spout etc complete
Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs complete.
S&F 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc. complete
S&F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete.
Supply only pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete.
S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union complete.
S&F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete
S&F in repairs 20 mm dia PVC ball cock (PVC float valves) high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete.
S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) complete
S&F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete.
S&F of 100 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete
S&F of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete
S&F of 75 mm bore PVC (SWR) bends any radius with oval acess door complete.
S&F of 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete
S&F of 75 mm bore PVC (SWR) junction double, (double T), equal or unequal with oval acess door complete.
S&F of 110 mm bore PVC (SWR) junction double, (double T), equal or unequal with oval acess door complete .
S&F of 110 mm PVC SWR cowls complete.
S&F of 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete
S&F of 100/125 mm bore PVC (SWR) gully trap, plain with grating including jointing with solvent cement complete
S&F in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe complete
S&F in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm .
S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding complete.
S&F in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete.
S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.
S&F in repair 15 mm bore angle cock with flange and similar to Cat part No 8310 of Make-Prayag complete
S&F in repair SS towel rail complete and similar to Cat part No BA-01 of Make-Prayag complete.
S&F 0.63 mm thick stainless steel plate rack of size 31"x36"x10" and similar to Cat No P-348 of Make Prayag complete.
Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.
M&L for Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm with 3 mm thick phenolic laminated white sheet cover for mounting of Piano Type switches, sockets, fan regulators for One light / Exhaust fan point controlled by one switch complete
All as per Item No 88 above but for One fan point controlled by one switch.
All as per Item No 88 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per Item No 88 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.
All as per Item No 88 above but for One bell point controlled by one bell push.
All as per Item No 88 above but for one 16 amp socket outlet for controlled by one switch on independent board with conductor cable 2.5 sqmm complete.
S&F switch piano flush button single pole one way 6 amp complete.
S&F switch piano flush button single pole one way 16 amp complete.
S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.
S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.
S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete.
S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.
S&F bell multi music type, AC, 240 volts complete.
S&F bell push, flush type, 6 amp 240 volts complete.
S&F angle holder, insulated polycarbonate body with back plate complete.
M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth continuity conductor complete.
S&F 20W LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 & similar to Make Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " complete.
S&F LED fixture 8 watt including connection & similar to Philips LED LINEA cat ref no. BN 550 WLED 6 - 6500 complete.
S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required & similar to Philips cat ref no. WT202W LED6S CW PSU S1 PC complete.
S&F in repairs MCB distribution board SPN 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete
S&F in repairs MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete.
M&L in replacement earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.
S&F in repairs MCBs Single pole 6 to 16 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete.
S&F in repairs MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408636 complete.
S&F in repairs MCBs Four pole 63 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408702 complete.
Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and deposit to MES store complete.
M&L of ceiling fan recd from taking down any sweep any make, cleaning throughly, servicing of fan motor & parts fitted there in, oiling, greasing to bush / bearings, replacement of unserviceable parts if required, applying two coat of white synthetic enamel paint over one coat of primer on fan blades and body, re- assembling, testing hanging at site complete.
S&F for exhaust fans AC single Phase 230/240 V of size 300 mm sweep with louver, metal body complete. Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.
S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete. Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.
Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete.
S&F fully transparent meter box suitable for energy meter made of polycarbonate/ high grade engineering plastic to permit clear view of display and can be sealed in such way that the entire meter is accessible only after breaking the seal complete. Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.
Supply, laying and testing cable in repairs XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete.
Excavation in soft / loose soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out complete.
Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete.
Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.
S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete.
M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.
Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.
Horizontal boring holes in soil for road crossing and getting out and disposal of spoil to a distance n exc. 50 m for a pipe of dia 40 mm in size complete.
Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance (exc 1.0 km total distance), beyond the lead included in the rates, including loading, unloading and stacking at the destination complete.
GIRNAR CONSTRUCTION
DMA PROJECTS
TECH SERVE SOLUTIONS
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .