SPL REPAIR TO BUILDING NO. P-112 (T-BLOCK) IN PHASE-II RESIDENTIAL AREA AND BUILDING NO. P-43/A/3 (MCPO INLIVING BLOCK) UNDER SPECIAL REPAIR B/R AT NAVAL STATION BHEEMUNIPATNAM UNDER GE (P) NAVY KALINGA

Amount

Demolition of chajja drop/roof projection drop of thin RCC section of depth 10 to 20 cm, thick 8 to 10 cm and finishing the concrete surfaces with CM 1:3 complete all as specified and directed by Engineer In Charge.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down PVC Chowkhats or frames exc. 1.5 sq. m but n exc 4.0 Sqm each with shutters (without taking off shutters from the frames)

Taking down Chowkhats or frames exc. 1.5 sq. m but n exc 4.0 Sqm each with shutters (without taking off shutters from the frames)

Taking down & Refixing Shutters of any description exc 1 Sqm and n. exc 2 Sqm each

Taking down Shutters of any description exc 1 Sqm and n. exc 2 Sqm each

Demolition of brickwork or stone boulder masonry built in cement mortor in portions

Demolition of unreinforced cement concrete of any description and in position not otherwise specially provided for complete all as specified and as directed by the Engineer-in-Charge.

Demolition of concrete in ground floors and pavings n.exc 15cm thickness (below or above Ground level)

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of RCC as in roofs, floors,(other than ground floors),beams,staircases,landings,chajjas,drops, facias and similar suspended works(reinforcement cut as required to facilitate demolition),

Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius with built in CM 1:6

Second class hard wood Plain solid straight chowkhats and frames, wrought ,framed, rebated on the solid, rounded or chamfered ,put together with glue pinned at joints, supplied and fixed.

Flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete.

Factory made shutters 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated.

35mm thick IInd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);

Preparation of new/ old wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed.

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq.m but n exc 0.5 sq.m each ditto

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc, area n exc 0.1 Sq.m each, ditto

Preparation of old painted steel and Iron surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style)consisting of frame made out of MS tubes for top & bottom rail, MS frame shall be covered with heat moulded plain cover PVC "C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and shown on drawing in SSR Part II 2004.

Solid PVC Door Frame of size 100mm x 60mm made out of 5mm WOOD GRAIN printed PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with printed sheet, reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing

125 mm Butt hinges, Medium weight, cold rolled mild steel, and fixed

200mm Aluminium anodised, barrel tower bolts of extruded section and fixed

Aluminium handles, cast type, anodised of size 150 mm

300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

UPVC window,(unplastisized poly-Vinyl Chloride) sliding windows multi-chambered and stiffened framed windows using 88mm x 52mm size sections all-round as main frames and shutters made with profile sections of size 57mm x 42mm, including the cost and fixing of 5mm thick clear float glass in shutters and stainless steel wire mesh shutters shall have well defined welded corner joints without any gaps, fixed the window unit to the existing masonry with anchor fasteners as required. The shutters shall have necessary handles and other associated fittings to facilitate smooth operation. Both the frames and the shutters shall be reinforced with GI profiles of thickness 1.25mm the entire window is covered with MS powder coated tube of size 40mm x 20mm all-round the frame the frame section, 10mm square bars horizontally placed at 120mm C/C and suitably placed vertically to avoid buckling and providing structural strength, Minimum weight shall be 10kg/Sqm and fixed to UPVC frames with suitable fasteners. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials complete all as specified and directed.

Aluminium , XMP wire mesh average width of aperture 1.40mm and fixed with aluminium wire staples

Anodised Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron)

Providing and injecting chemical emulsion for Post constructional anti termite treatment along external wall below concrete apron using chemical emulsion @2.25 Ltrs/linear metre including drilling and plugging holes etc in apron.

Treatment of soil under existing floor using emulsion @1litre per hole ,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1cement:2 coarse sand) to match the existing floors.

Plain Cement concrete 25mm thick type B-1, 1:2:4 (20mm graded aggregate) in sub base

Providing joint free non skid coloured ceramic tiles 600 x 600 x 7 to 8 mm thick floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement screeding in CM (1:6).

Non skid/ joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm, skirting etc.set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over backing of 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces

Non skid, ceramic “coloured” joint free tiles of size 400 x 400 x 6-7mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed of CM 1:6 complete of item all as directed.

4mm thick pin headed/frosted sheet glass, ordinary quality in square n. exc. 0.5 sq.m. in louvers complete all as specified and as directed by the Engineer-in-Charge.

Powder coated Aluminium grill/Deco grill for Windows , Ventilators etc

Non skid/matt finish coloured ceramic tiles 7 to 8 mm thick of size exceeding 0.18sqm but not exceeding 0.38sqm, in floors etc.set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over Screed bed or bedding layer of mortar 15mm of thick CM 1:4 for laying floor finishes

Glazed ceramic coloured tiles 300 x 450x 6-7 mm thick as in vertical surface set & jointed in neat cement slurry & pointed with coloured cement to match over 10 mm thick rendering with CM 1:4 all as specified &directed.

Machine cut mirror finished kota stone slab flooring 18-20mm thick laid & jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing as in steps/skirting /shelves over 10 mm thick rendering with CM 1:4, etc complete all as specified& directed.

Machine cut polished kota stone 20-25mm thick laid & jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing as in steps/skirting /dado and pillar over 10 mm thick rendering with CM 1:4, etc complete all as specified& directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

In repairs stainless steel pipe 25mm dia Curtain rod for Windows, doors opening etc

In repairs Fancy type CP Knobs for fixing curtain rod all as directed and specified

Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 20mm thick in cement mortar 1:4

In repairs 32mm Gun metal Globe Gate valves with iron wheel head, screwed both ends for iron pipe

Taking down PVC (SWR) pipes (of any radius) including joints etc. complete all as specified and as directed by the Engineer-in-Charge.

In repairs PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls

In repairs PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls

In repairs PVC (SWR) vent cowl 110mm

In repairs PVC (SWR) vent cowl 75mm

In repairs PVC (SWR) bends any radius 75mm

In repairs PVC (SWR) bends any radius 110 mm

In repairs PVC (SWR) double 'Y' branch piece junction , single equal or unequal 110 mm bore

complete removal of existing treatment on internal walls and applying two coats of Oil bound distemper over wall care putty of 2mm thick all as specified and directed

preparation of old surfaces and applying three coats of white wash on Ceiling

preparation of old treated surfaces and applying one coat of Exterior emulsion on walls complete all as specified and as directed by the Engineer-in-Charge.

In repairs two way bib cock, CP, Fancy type - 15mm dia

Taking down cement plastering on brick or concrete wall ,including raking out joints, hacking for key, scrubbing down with water etc

10 mm thick rendering as in Internal plaster on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth

Preparation of new plastered wall surfaces and applying two coats of plastic emulsion paint over one coat of priming paint primer on internal surfaces of walls etc complete all as specified and directed.

Rendering cement plaster 15 mm thick on fair faces wall in CM 1:4 finished even and smooth and even without using extra cement with WPC in 5mm thick outer layer. (Note : water proofing compound will be measured and paid separately)

preparation of new surface of walls and applying two coats of Exterior emulsion over a coat of primer for external surface on walls complete all as specified and as directed by the Engineer-in-Charge.

05 mm thick rendering on Celling plaster of concrete surfaces in cement mortar 1:3 complete all as specified and directed

preparation of new plastered surfaces and applying three coat of white wash complete all as specified and as directed by the Engineer-in-Charge.

PVC connection 15mm bore 45 CM long with PTMT nuts at each end .

Hasp and staple Aluminium anodized, incl bolt to hinge plate and fixed with screws 100 mm long.

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site.

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site.

32 mm outer dia, 3-layer PP-R P o l y p r o p y l e n e random copolymer) for concealed pipes SDR 7.4 (PN - 16) UV stabilised and a n t i m i c r o b i a l fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

25 mm outer dia, 3-layer PP-R P o l y p r o p y l e n e random copolymer) for concealed pipes SDR 7.4 (PN - 16) UV stabilised and a n t i m i c r o b i a l fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

20 mm outer dia, 3-layer PP-R P o l y p r o p y l e n e random copolymer) for concealed pipes SDR 7.4 (PN - 16) UV stabilised and a n t i m i c r o b i a l fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.

In repair Rotational moulded polythene water storage tank conforming to relevant IS hoisted and fixed in position all as specified in SSR-I 500 ltr capacity

In repair concealed type CP with long cup and shank Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron \pipe or for unions

Ball valve high pressure of PTMT with epoxy coated Alu Rod and high density plastic ball screwed for iron pipe and fixed 20 mm bore complete all as specified.

Gun metal gate valve with iron wheel head ,screwed both ends for iron pipe and fixed 32 mm bore complete all as specified.

Cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and directed.

Supply only integral water proofing treatment

18 mm thick Prelaminated MDF board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in cupboards etc

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised for 30 mm flaps

75mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection , pavement surface finished even and smooth without using extra cement complete all as specified and directed.

Framed work such as gates, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc for ornamental and intricate design

Dismantling Structural steel work including doors, gates etc.

Providing Precast RCC 1:2:4, Type B-1 using 20mm graded stone aggregate as in Shelves ,landings, cover slabs [for manholes etc], chullah hoods, chajjas, water troughs, mangers, and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed.

Rendering 15mm thick with CM 1:3 with water proofing compound on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra lime or cement)

Magneto Plastic Magnetic Door Stopper Catcher with Screw Fitting with Sleek Design.

Plastic Premium Magnet , Almirah and Cupboard Door. with Screw Fitting with Sleek Design.

In repairs Bib taps 15mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

In repairs 15mm bore dia Pillar taps Fancy type, chromium plated, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

In repairs 15mm bore dia Stop valves fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Health Faucet for 15mm dia with 1.5m long easy flex tube in Chrome finish and wall look

In repairs Tubular towel rail brass chromium plated, 20mm dia, 60cm long between flanges

In Repair Wash Hand Basin, white ,flat back, size 550x400mm excluding taps ,waste, chain and plug but including brackets incl cutting and for pinning in ends of brackets.

In repair vitreous china wash down water closet of "Orissa" pattern size 580 x440mm white with integral foot rests including connection to trap and to flushing pipe anti syphonage pipe etc complete and making good to floor all as specified and directed.

In repair PVC Flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket complete all as specified and directed.

Soap dish chromium plated, fixed to plugs with chromium plated brass screws

In repairs Brass chromium plated shower rose 125mm size

In repairs PVC flexible connections 15mm size with PTMT nuts of length 600mm

125mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

Cement concrete shelves chajja etc Type B-1 1:2:4 (20mm gde agg) and setting complete.

TMT bars of 8mm dia and cut to length bent to shape required incl cranking ,bending and binding with and incl mild steel wire annealed not less than 0.9mm dia complete

Sheet glass 4mm thick, pin headed in louvers

Brickwork with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6.

Non skid coloured ceramic tiles 7 to 8 mm thick of size 600 mm x 100 mm, in vertical surfaces (skirting), set and jointed in neat slurry and pointed in white or coloured cement to match for joint free over 10mm thick backing coat of CM 1:4 for laying floor finishes

PVC handrail cover size 40mm & 50mm width fittings fixed to Hand rail and all as specified and as directed by Engineer in Charge

SS chromium plated plate rack of size 600x750mm made by 1 mm thick sheet all as approved by GE.

Preparation of new plastered surface (internal walls) and applying two coats of Oil bound distemper over wall care putty of 2mm thick all as specified and directed

Provn of making hole in marble/granite slab of cooking platform for cooking gas pipe etc by means of drilling machine n.exc 25 mm dia all as directed by Engineer-in-Charge

In repairs 15mm bore dia Washing Machine Bib Cock fancy type Chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed.

Taking down old tarfelt treatment from roof surfaces including plaster etc complete.

10 mm thick screed bed on roof padding in CM 1: 3 finished fair and even with using integral water proofing compound. (Note : water proofing compound will be measured and paid separately)

Normal water proofing treatment on roof slab portion consisting with following operation (i) Cleaning surface by wire brushes, brooming, removing dust and applying with bitumen primer confirming to IS 3384- 1986 @ 0.50 Kg per Sqm. (ii) Applying a tack coat of hot bitumen 85/25 @ 1.2 Kg per Sqm for water proofing membrane (iii) Applying of Polymeric water proofing membrane wt not less than 3 Kg per Sqm over entire area with overlapping and sealed all as specified and directed (iv) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane (v) Applying a bituminous aluminium primer/paint 0.10 kg per Sqm complete all as specified and directed.

In repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm

Taking down carefully existing aluminium conductor point wiring (light / fan / socket or power point) complete, with all fittings such as switches, socket, regulator, ceiling rose, utility light fittings and lamp holders etc and removing materials from site and making good the disturbed surfaces of walls roof and floor etc as per existing specification complete all as specified and as directed.

Taking down carefully by unscrewing from boards / outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and fan regulators etc. for reuse at site complete all as specified and as directed. (Note : To be measured only when found serviceable in all respects complete for reuse)

Point wiring for one light controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn carefully through New pvc casing caping along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including new pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 2 mm thick bakelite sheet cover for mounting switches, etc including testing on completion complete including making good disturbed surface all as specified and as directed.

All as per Item no 120 here-in-before but for one light point controlled by two 2 way switch all as specified and as directed.

All as per Item no 120 here-in-before but for one fan E/Fan point controlled by 1 one way switch and regulator all as specified and as directed.

All as per Item no 120 above but for one 3 pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per Item no 120 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches all as specified and as directed

All as per Item no 120 here-in-before but for one16 Amp 3 & 5 pin switch socket outlet, independent with 4.0 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 4.0 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

All as per Item no 120 here-in-before but for one bell point controlled by one bell push on the same board with other switches or independent all as specified and as directed.

Sub main wiring with two single core PVC insulated un-sheathed cable with multi-stranded copper conductor of 6 sq mm size and drawing into and including PVC casing caping with earthing cable of PVC insulated un-sheathed stranded copper conductor of size 6 sqmm, single core, as earth continuity wire all as specified and as directed. (NOTE: 3 runs of 6.0 Sqmm cable and one run of PVC casing caping will be measured as one unit i.e. RM)

socket combination 2 in 1 3 pin 5 and 15 amp flush type universal.

switch piano flush button single pole one way 5 amps.

Fixing only switch flush button single pole one way 5 amp (Note : Material obtained from item No 119 here in before)

switch flush type, single pole Two way 5 Amps 230 volts.

socket combination 2 in 1 3 pin 5 amp flush type universal.

Fixing only switch socket outlet 5 amp flush type (Note : Material obtained from item No 119 here in before)

ceiling rose surface bakelite three terminals all as specified and as directed.

Fixing only ceiling rose surface bakelite three terminals (Note : Material obtained from item No 119 here in before)

fan regulator electronic deluxe rotary step type

Fixing only fan regulator any type (Note : Material obtained from item No 119 here in before)

Bell ding dong AC 230 volt single pole

Bell push, flush type 6 amps.

sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Triple Pole and Neutral (TPN), suitable for 4 way, Double door 415 Volts.

sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 8way with dim rail earth and neutral bar.

MCB Four Pole (FP) C curve 10kA breaking capacity of 63 amps, 415 Volts in proper position all as specified and as directed.

MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.

MCB Double Pole of capacity up to 40 amps, 240 Volts c-series with 10kA breaking capacity all as specified and as directed.

Indoor luminaire decorative batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 10 W,230 V,50 HZ, slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector.

Indoor luminaire decorative batten for wall/ceiling mounting box type Extruded aluminium housing ,PC Diffuser, energy efficient saving LED BATTEN LIGHT 20W,230 V,50 HZ, slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed MAKE CG CAT NO CCS-100-20-65-HL2-DP-NWH or equivalent as approved by GE

10 W LED decorative CITY 3 wall/surface mounting polycarbonate body suitable for retrofit LED Lamp Base B-22 incl lamp ,all as specified and as directed Make Havells cat no LHDL06160099 or equivalent as approved by GE

LED mirror light fittings 07 W,230 V,50 HZ suitable for indoor and outdoor applications complete all as specified and as directed.

LED bulk head fittings 10 W,230 V,50 HZ suitable for indoor and outdoor applications complete all as specified and as directed.

Security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clamp etc all as specified and as directed by the Engineer-in-charge.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades for safe custody for reuse and re-assembling the fan complete and refixing the fan in same position including all electrical connection all as specified and as directed.

Taking out and removing burnt copper winding, cleaning the armature, rewinding the fan armature for 1200mm sweep fan with new super enamelled copper wire of existing gauge including necessary insulating materials etc and varnishing with approved grade of insulation varnish and heating up and testing all as specified and as directed.

Supply only bearing No.6201/6202 for ceiling /Exhaust fan (Make - TATA/SKF/NBC ).

Supply only fan condensor upto 2.5 mfd (Make - USHA/UNIVERSAL/Havells}.

Painting of ceiling fans complete of any sweep/make with one coat of first quality synthetic enamel paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavaties with filler materials, and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc2 cm ) complete all as specified and as directed.

Exhaust fan wall mount type 300 mm sweep metal body , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

Exhaust fan wall mount type 250 mm sweep PVC body , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

Earthing complete with 2.5m CI pipe 80 mm dia with flanged ends, centrifugally cast, class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slot up to 2 mtrs length buried directly and preferably vertically in ground with top flanged ended 2 mtrs below ground lebel welded/connected with GI strip 32X6 mm dia Galvanised iron or steel wire, connected to Earth pit to DB for earthing including filling the pit with charcoal common salt surrounding the earth pipe including drilling 400 mm dia bore in any strata of soil to lower the CI pipe complete

ceiling fan complete with accessories 230v SP 1200 mm sweep and connection with ceiling rose with MS hook for hanging of suitable size all as specified and as directed. Make Havells Model No ES 50 or Equivalent as approved by GE

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for trench of FRLS cable etc and getting out in Soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point all as specified and as directed

sand cushioning for protection of underground FRLS cable consolidated and compacted with clean dry sand all as specified and as directed (Compacted thickness shall only be measured and paid)

XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 16Sqmm 4 core laid in trench /poles/on wall all as specified and as directed .

XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 35Sqmm 3.5 core laid in trench /poles/on wall all as specified and as directed .

Supply and lay bricks common burnt clay building bricks sub-class B of size 230x113x75 complete all as directed by Engr-in-Charge.

Drilling of hole horizontally 80/40 mm dia bellow the road for providing casing pipe of cable protection by using mechanical/hand drill

water heater (Geyser) storage type 5 star rated AC 230 Volts of capacity 25 litres with Grounding of 4 Nut and Bolts and connecting pipe for outlet and inlet water from geyser complete all as specified and as directed.

galvanized iron tubing 50 mm bore light grade with all fitting for protection of FRLS cable, laid in trenches/wall/floor incl necessary clamp, bolt/nut if any all as specified and as directed. Note: Excavation ,earth work shall be measured and paid separately

Note : 1. All items in the schedule shall be read in conjunction with S&F or M&L as applicable 2. All items in the schedule shall be completed in all respect as directed by the Engr-in-Charge.

SSV CONSTRUCTIONS

F AND M TECHNOLOGIES

VASANTHA NAIDU ASSOCIATES

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS