WORK OF LEG REPAIRING OF 132 KV S/C MORADABAD-AMROHA LINE UNDER ETD AMROHA.

Amount

The Following works are to be carried out at 132 KV Moradabad- Amroha Line Under ETD-Amroha.

Digging the pit around the tower leg of the size 2x2x1.5M cut the copping with the help of chisel and hammer of leg upto 1.50 M depth. Clean the junked leg with the help of emery paper/iron brush. Apply two coats of good quality red oxide primer at rusted portion. Make 12 Nos holes of 18mm dia (6 holes at bottom and 6 holes at top) of rusted portion in 90mm x 90mm x1.5M size angle with the help of gas cutter. Fixing additional galvanized angle with the help of nuts & bolts, also fill up mid portion by welding for strengthening the stub of tower. To build up chimmney of leg upto 30cm above ground level with 1:1:3 ratio cement and concrete. (The M.S. Angle and nuts & bolts shall be given by the Deptt. free of Cost). Details of Leg Tower No. Leg to Repaired 30 01 Leg 36 02 Leg 40 02 Leg 42 02 Leg 43 02 Leg 48 03 Leg 50 03 Leg 52 03 Leg 54 02 Leg Total Leg 20 Leg

TIRUPATI ELECTRICALS

QASIM ENGINEERING COMPANY