PROVN OF DEFICIENT OTM ACCN OF INF BN NO. 1 AT JAMNAGAR MIL STN (JOB NO 07/AMWP/11DIV/ADI/Q3/2020-21)

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage (+ or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 27(R)

Lump sum price worked out by the contractor for "SITE CLEARANCE EXCAVATION & EARTH WORK " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 29(R)

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 30(R)

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 32(R)

Lump sum price worked out by the contractor for "PATH/HARDSTANDING" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 33(R)

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 34(R)

Lump sum price worked out by the contractor for "COMPOUND FENCING" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 36

Lump sum price worked out by the contractor for "RETAINING WALL" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 37(R)

Lump sum price worked out by the contractor for "SEWAGE DIPOSAL" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 38

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 39

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIC SUPPLY" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 40(R)

Lump sum price worked out by the contractor for "TELEPHONE CONDUIT" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 41

Lump sum price worked out by the contractor for "SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 42

Lump sum price worked out by the contractor for "HOT WATER SUPPLY" as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 43

Lump sum price worked out by the contractor for "SPECIAL ITEM OUTDOOR LIGHTING FOR PLAY GROUND" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 44(R)

Lump sum price worked out by the contractor for "FOOTBALL/VOLLEY BALL/BASKET BALL/HOCKEY GROUND" as listed in Schedule ‘A’ Part-XVI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 45(R)

Sch 'A' PART-XVII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL WATER SUPPLY S&F angular cock valves regular body with adjustable walll flange 15mm dia screwed down fixed and jointed with adhesive, taflon tape complete all as specified and directed.

S&F brass chromium plated over head shower with arm 255mm with flange size fancy type with or without swival joints any size including fixing to steel pipe 15mm bore union and joint with adhesive, taflon tape as specified and directed. Make: Jaquar/Crabtree/Kohler/Cera

S&F Brass CP wall Mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore and fixed. Make and joint with adhesive, taflon tape complete all as specified and directed. Make:- Prayag/jaquar/ceras

S&F health foucet with 1.50mtr tube & hook any description including flexible attachment complete all as specified and directed. Make:- Prayag/jaquar/ceras

INTERNAL ELECTRIC SUPPLY S & F T.V./Telephone Socket Outlet, including M.S. Box of size 100x100x65 mm with cover plate complete all as specified and directed (includes 2 No of TV and 2 Nos of Telephone)

M&L for sub main wiring with two runs of 6.0 sqmm size main cable and one run of 6.0sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS 694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/accessories all fixed to the surface of wall/seiling complete all as specified.

M&L for sub main wiring with two runs of 4.0 sqmm size main cable and one run of 4.0sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS 694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/accessories all fixed to the surface of wall/seiling complete all as specified. Note for submain wiring item no 23 and 24: The under mentioned specefied runs of single core cables and specefied runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one runs length. The small lengths required for loops etc for connection in DBs are deemed to the included and only the cable covered in conduit shall be measured.

S & F decorative box type LED tube light fitting 1x20 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed.

S & F DECORATIVE MIRROR type LED tube light fitting 1x10 watt with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed.

Supply and fix 9 watt, LED Porch light with fitting complete fixed in ceiling/wall complete all as specified and directed

Supply and fix sheet metal enclosure with socket plug top and 32 Amp MCB SP complete all as specified and directed.

S&F heavy duty, exhaust fans of 300 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan.

S&F heavy duty, exhaust fans of 450 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan.

S&F ceiling fans 1200mm sweep size, BEE Energy efficient 5 star rated Powered With Activ BLDC Technology, confirming to latest BIS Licensing and IS Specifications, Which consumes Less then 50% of the power as compared to conventional type Fans, Power Consumption 32 to 35 Watts, RPM 370 +- 25%, Service Value >= 6.0, Air Delivery in CMM = 220, down rods, All including connection with single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors IS 694 marked, from ceiling rose to fan complete all as specified and directed.

S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 10 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistaranded copper conductor sheathed cable of size 1.0 SQMM fixed with including bracket made of GI Pipe 40mm bore light grade , 1.5 Mtr long bent to shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed Note : (1) The LED lights shall have gurantee for 5 Years from date of completion of contaract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.Cat No. LSTS-30-CDL of Crompton or equivaelnt as per make listed in Appx.

Supply and fixing of MCBs, 10 KA rupturing capacity, IS-8828 marked of the under mentioned type and rating and fixing in DBs (DBs catered separately in this Schedule)

(a) MCB , SP ( upto 32 Amp) 240 Volt single pole, breaking capacity 10KA with "C" Charactristic complete all as specified

(b) MCB , SPN 32 Amp 240 Volt double pole, breaking capacity 10KA with "C" Charactristic complete all as specified

Supply , installation & commissioning MCB Distribution board TPN double door, for mounting DP/ SP/TP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and 200 Amp rated bus bar, DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DP/SP/TP MCB shall be of same make as DB. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed at site.

(a) MCCB DB suitable for 63 Amp TPN 4 way

M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically (in earth pit not less than 2.25 metre deep below ground level) with the top edge of earth plate at a depth not less than 1.5 metre below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI earth wire 4 mm dia bolted (with GI nuts, bolts & check nuts) and rivetted to earth (Plate) electrode at one end and connected to main switch board / DB at the other, earth wire protected by and incl GI pipe 15 mm dia (medium grade) from top of electrode to main switch board and also incl watering pipe GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-0 (using 12 mm graded crushed stone aggregate), RCC cover using 8mm TMT bars @150mm C/C, funnel, wire mesh including necessary excavation & earth work, etc as shown on electrical plate No 3 of SSR Part I.

SEWAGE DISPOSAL S&F DWCPE(SN8) pipes, nominal dia 150mm laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring (depending on pipe ends) as per manufacturer instructions complete all as specified and directed.

COMPOUND FENCING Supply only PVC coated chain link of 75mm x 75mm mesh with min 5mmm dia wire(4mm dia wire and 1mm thick PVC coating) complete all as specified and directed.

SUMMER APPLIANCES Supply and installed refrigerators electric driven (single phase) capacity upto 190 Litters direct cool single door 5 star rating complete all as specified and directed.

Supply and installed refrigerators electric driven (single phase) capacity 270 Litters direct cool single door 5 star rating complete all as specified and directed.

Supply & Installation commissioning Voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input voltage between 170 v to 250 v with out put voltage stablized at 230 v with accuracy of +/- 2.5% and cap 1.0 KVA complete all as specified and directed

Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input voltage between 170 v to 250 v with out put voltage stablized at 230 v with accuracy of +/- 2.5% and cap 4.0 KVA complete all as specified and directed

EXTERNAL ELECTRIC SUPPLY M&L for dry river sand in trenches for cable cushioning & protection including spreading, ramming complete all as specified and directed. (Note:- (i) Punned down thicknees shall only be measured and paid) (ii) This item is also applicable cushing of cable to be used for play grounds.)

M&L for boaring of 100 mm dia in road crossing / drains with mechanical help and other necessary arrangement for passing of cable/pipe as required complete all as specified and directed.

S&F MCCB 4 Pole 100 Amp ,50 Hz,415 v with rupturing Cap 25 KA with necessary accessories/mounting in bush bar in existing LT panel complete all as specified and directed.

Supply, installation, testing and commissioning LT panel board of suitable size for working on 3 phase, 4 wire, 415 volts, AC, 50 hz, outdoor type, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation with IP-54 protection fabricated out of 3.15mm thick CRCA sheet duly pretreated in 7 tank process powder coated in Siemens grey colour inside and outside with IP-54 protection with openable shutter on both side (Front and rear side) with locking arrangement. Panel shall have front and rear opening with hinged type door and rubber gasket, handles, industrial type locking arrangement, cable alleys, cable alleys, bus bar chamber and switch gear compartment, internal, wring, bottom cable entry holes for incoming and outgoing cables, earthing terminals, affixing danger notice plate, each compartment shall be numbered/lettered for indication, bus bar duly covered with heat shrinkable sleeves of colour coded duly fixed on DMC/SMC insulators including control wiring with PVC insulated, flexible, multistranded copper conductor cables of adequate size and adequate length, control fuses duly ferruled, crimped with suitable lugs/thimbles. Panel board shall be mounted on MS angle iron frame fabricated out of 40mm x 40mm x 5mm angle irron of suitable size and 04 No legs of angle iron 50mm x 50mm x 6mm each 45 cm long duly painted with two coats of synithetic enamal paint and including PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in foundation/platform as per site requirement. The panel board shall be fabricated from CPRI approved manufacturer complete all as specified and directed and comprising of following:-

(i) Copper bus bar rating 1.5 times of incoming MCCB rating for phase and neurtal both. (ii) MCCB 63 Amps,4 pole, 10 kA - 01 Nos thermal magnetic release fixed type -01 (for Incoming). (iii) MCCB TPN 40 Amps -02 (for outgoing) (iv) MCB 6-32 Amp double pole -01 (for outgoing) (v) Digital type Voltmeter three phase class 0.5, 96X 96 sqmm flush mounted case (vi) Digital type Ammeter three phase class 0.5, 96X 96 sqmm flush mounted case (vii) LED Type Indicator Lamps - 03 Nos. (Viii)Control fuse -03 Nos Note:- The panel shall be made by CPRI approved manufacturer and should be as per the drawing approved by GE.

M&L for Earthing with galavanised steel earth plate elctrode 600mm x 600mmx6mm thick buried directley in ground, (earth pit not less than 2.25m below ground level), with the top edge of the plate not less then 1.5 m below the normal ground level, connected to GI earth strip of size 32mm x 6mm thick soldered and riveted to earth plate,GI earth strip will be protected by using 40mm bore GI pipe (light grade) from earth plate to equipment and watering pipe 20mm bore (light grade), chamber and coping shall be made in PCC (1:3:6) type C1 using 20mm graded stone aggregate, RCC pit cover 50mm thick in 1:2:4 type B1 using 20mm graded stone aggregate reinforeced with 8mm dia TMT bar @ 80mmc/c both way with lifting hook made out of 8mm dia TMT bar duly embedded in RCC cover in lieu of CI pit cover with angle iron frame including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No 3 of SSR Part I and as specified including charcoal dust, common salt complete and earth lead connected to earthing test point/main point and testing of earthing complete as directed. (Note:- (i) Main earthing lead from earth plate to test point & upto 7.5mtr to be provided and the cost of the same shall deemed to be included in the quoted rate. (ii) This item is also applicable for earthing of play ground.).

SPECIAL ITEM FOR OUT DOOR LIGHTING FOR PLAY GROUND Supply and fix LED flood light 120W IP 66,system luminous efficacy 110 lm/w with front toughened glass complete all as specified and directed

S & F thermoplastic cable Junction box for street light of size 205mm X 255mm X 112mm including bus bar/terminal for cable connection with IP-66 protection and fixing arrangement to fix the box on pole by providing MS clamp of size 32mm X 6mm -4Nos as per product complete including following accessories complete all as specified and directed. (i)MCB 40 Amp four pole -01 Nos (for incoming) (ii)Double pole 6-12 A -02 Nos (for out going)

S & F thermoplastic cable Junction box for street light of size 130mm X 180mm X 77mm including bus bar/terminal for cable connection with IP-66 protection and fixing arrangement to fix the box on pole by providing MS clamp of size 25mm X5mm -2 Nos as per product complete all as specified and directed. (i)Double pole 6-12 A -01 Nos

FOOT BALL / VOLLEY BALL / BASKET BALL / HOCKEY GROUND Suppy and erection of factory made prepainted football goal post (fixed type) made up of mild steel pipe of dia 75mm and 50mm (back support) of standard size not exceeding 12ft x 6ft including Nylon Net Fine Quality complete all as specified and directed.

Supply and erection factory made prepainted hockey goal post (fixed type) made up of mild steel pipe of dia 76mm of standard size not exceeding 12ft x 7ft complete all as specified and directed.

Supply and erection factory made PU prepainted Standard pole with extention 3.20m for basket ball (fixed type) made up of mild steel pipe of dia 6 inch including 18mm thick transparent Acrylic Board of size 180cm X 105cm including heavy duty solid ring and nylon net complete all as specified and directed.

Supply and erection factory made PU prepainted Standard Volley ball pole all as per sample/standard complete all as specified and directed.

M&L for laying 5 layer synthetic/acrylic sports flooring based on 100% cushioned acrylic coating system as per manufracturer instruction and through qualified applicator in colours as approved and directed.

Complete Demolition of building No. P-09 (on As is where is basis) including taking out of E/M fittings & fixtures including wiring, stone masonry/ brick masonry, pipes & fittings, doors & windows, iron & steel items including reinforcement etc stacking properly as directed by Engineer in Charge. (Note: Unserviceable demolished material/Debris obtain from demolition of building shall be removed outside of MD land.)

dave engineering works

Micro Protect

Hi Tech Transpower Pvt Ltd

RAMDEV CONSTRUCTION CO.

M/s Mohata Buildcon

Vraj and Vaj Construction