Drilling of 165 mm dia. x 50 Mts. Deep 8 No bore by DTH Rig including providing, supplying, lowering, laying and jointing casing pipe and column pipe and supply, installation, testing and commissioning of pumping machinery, including all require accessories in Limbadi town various location

Description Quantity Unit Total Rate Amount

Drilling of 165 mm dia. 50 M depth bore well by DTH rig in soft/hard rock in various area of 8.00 Nos 17800.00

S.I.T.C.of 3 Phase Borewell Submersible Pump Sets suitable for bore of 150 mm dia or more 8.00 Nos 19611.00

Electric motor driven borewell submersible pump set confirming to IS 8034 and motor

2 confirming to IS 9283 working at 3 phase 400 / 440 volt 50 Hz AC supply & 2900 RPM.

Cat 5.1, 320 LPM discharge and 55 m head, minimum 7.50 HP

Supplying & erecting approved make 3 phase motor control cubical panel ( Star - Delta) made 8.00 Nos 12993.65

from16 G. CRCA sheet duly painted with epoxy powder painted inside and outside with hinged

doors and locking arrangement, consisting of suitable size of ON- OFF isolator (AC - 3/23 duty)

main fuses, single phasing preventer cum water level. Guard (Complete unit), Toggle switch to by

pass Single phase preventer cum WLG, indicating lamps for R- Y- B phases, over load relay,

3 Automatic water level controller, Ammeter & Voltmeter each with two way selector switch

incoming wires duly socket Crimped, Panel to be erected on angle iron frame grouted on wall as

directed. Star Delta & main contactor, overload relay, thermal / Electronic Star delta cutoff timer,

start - stop push buttons. The isolator overload relay & contactors of L& T, Siemens or Cuttler

Hamer make only. Panel to be erected on angle iron frame ground on wall. (B) S/D up to

Lowering of submersible motor pump set at the depth of following ,complete with required. Nos. 8.00 Nos 1711.95

and size of casing pipes erected by means of proper chain pulley block & pipe wrenches after

4 checking of threads of each pipe with coupling to take the load of the pump set and pipe assembly

filled up with water (C) upto 60 mtr.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper 480.00 Rmt 172.71

5 cable approved make of following Size. (D) 3 Core x 6 Sq. mm.

Manufacture, supply & delivery of ISI marked UPVC Casing pipe (IS 12818 88.00 Rmt 906.00

with latest amendment.175.00 mm nominal dia. " CS " Type

Supplying of following size of Standard UPVC column pipe with coupler and wire lock [D] 50 mm 400.00 Rmt 297.95

Description Quantity Unit Total Rate Amount

Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long, pump guard set, 8.00 Nos 1489.75

starter pipe Rubber ring for submersible pump & UPVC column pipe as directed by Engineer - in -

charge with necessary plumbing as desired. [D] 50 mm dia

I/We am/are willing to carry out the work @ % percent (should be writer in figures and words) below/above /at par , the estimated rates

mentioned above, amount of my/our tender works out as under:

(* Please strike out whichever is not applicable)

Above all items of “Schedule-B” with Item Description, Unit, Qty, Rate and Amount have verified by me and found in order.

Bidder’s Stamp and Initials