Const. of 50 Bedded Hospital in Saraswati Khera - Bhatmajra, Pehowa, Distt. Kurukshetra (Pdg. 11KV Elect. Sub Station) (Recall).

Amount

1 : - ( c )Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. 31.12 c (i)

: - 100 amp.to 220 amp.415 V,10 KA 3-phase. 31.12 c (ii)

2 : - Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 50 mm x 50 mm x 6 mm. 31.13(I)

3 : - (P)Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 65 mm dia on flushed. 31.21 (xiv)

4 : - Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 120 mm dia. 31.21(xxx) (a)

5 : - (Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . 31.22(i)

: - Extra for using salt and charcoal / coke for pipe earth electrode as required. 31.22(ii)

: - Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. 31.22(iii)

: - Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as equired. 31.22(iv)

: - Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. 31.22(v)

: - Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(x)

: - Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xiv)

: - Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(xi)

: - Pdg. and fixing 25 mm x 5 mm GI strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xv)

: - Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. 31.22(xix)

: - Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . 31.22(xvi)

6 : - (S)Under Ground Cables. Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections . 150 Sq. mm 3.5 Core Cable . 31.26 (xxxi) Ard.

: - 95 Sq. mm 3.5 Core Cable . 31.26 (xxix) Ard.

: - 70 Sq. mm 3.5 Core Cable . 31.26 (xxviii) Ard.

: - 50 Sq. mm 3.5 Core Cable . 31.26 (xxvii) Ard.

7 : - Supply and erection of suitable compression type brass cable glands for underground Cable. 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. 31.28 (iii)

: - 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core . 31.28(iv)

: - 120 Sqmm to 185 Sqmm Cable 3 to 3.5 Core 31.28 (v)

8 : - ( T )Street Light. Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 9 metres long 105 mm x 115 mm at top and 105 mm x 315 mm at bottom with working load of 200 Kg. burried 1.80 m in ground. 31.30 (VI) (ii)

9 : - (X)Miscellaneous . Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm . 31.35 (ix) (g)

: - 70 sqmm . 31.35 (ix) (h)

: - 95 sqmm . 31.35 (ix) (I)

: - 150 sqmm . 31.35 (ix) (k)

: - Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S.rod welded / revitted at the top with 10 cm. Dia 5 mm thick G.I.plate inscribed with `cable' world on it , having a cross arm 30 cm. long of the same dia welded at the bottom , in existing trench 45 cm. below ground level . 31.35 (xi)

10 : - Supply, Installation, Testing and Commissioning of Wall/ free standing flooor mounting dust & vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3 mm thicness seperate detacable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear.Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3 mm thick for separately cable alley to BBC from switch chamber Extended solid copper bars up to cable cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors withdetachable extension type structure. The panel will be complete with control wirring (copper) and fuse protection.(only outer area on all sides shall be measured) 31.63

11 : - Supply and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. 31.64

13 : - Supply and fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect. Rotary handle upto 125 A, MCCB 31.66 (i)

: - Rotary handle above 125 A, MCCB (ii)

14 : - S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer- incharge of the work. HDPE Pipe 90/75 outer dia / inner dia. 31.67 (ii)

: - HDPE Pipe 145/123 outer dia / inner dia. (iii)

15 : - Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 500 amp 31.69 viii

16 : - Supply & erection of aluminum conductor HT 11KV (E) armoured XLPE cable in existing pipe/trench or on surface/loose including cost of making connection etc.with all labour and material upto the entire satisfaction of Engineer-in –charge of work Size 50mm 3 core HT XLPE cable 31.71 ii)

17 : - Supply and erection of heat shrinkage type end termination jointing kit indoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cable/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect. Suitable for 70 to 120 sqmm 3core XLPE Cable 31.72 II

18 : - Supply and erection of heat shrinkage type end termination jointing kit outdoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cable/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect. Suitable for 70 to 120 sqmm 3core XLPE Cable 31.73 ii

19 : - Supply & erection of cable tray made out of 2 mm thick galavanised perforated sheet steel including erection of the same on wall or ceiling with necessary fixture and other material required to complete the Job in all respect upto the Entire statisfaction of Engineer-in-Charge of the work. 50 x 150 mm 31.81 ii

: - 50 x 300 mm iii

20 : - Supply & erection of factory manufactureed cable tray cover made of 16g GI Sheet complete with Fastoner Nuts bots and in position including all petty material required to complete the Job in all respect upto the Entire statisfaction of Engineer in Charge of the work Suitable for 50 x 150 mm 31.82 ii

: - Suitable for 50 x 300 mm iii

21 : - Steel Reinforcement ( Civil HSR ) Fe-500 E.Q.R. TMT Steel bars for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete. 18.22

22 : - DSR ITEMS Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required. 13.1

23 : - Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per,metre) pole top bracket/ cross arm for single 11 KV over head, line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required. 13.2

24 : - Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required 13.6

25 : - Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. 13.1

26 : - Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. 13.13

27 : - Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation of pump, DG set etc including form work etc as required. 14.09

28 : - Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required (excluding reinforcement). 14.1

29 : - SITC of 250 KVA, Outdoor type, oil cooled Transformer, 11/0.433 KV, Copper Wound with Off Circuit Tap Changer ( Kirloskar Make ) as per IS 1180, Level-2, complete in all respect upto the entire satisfaction fo Engineer- in Charge of work. Make -Alstom, Bharat Bijlee, CG , Crompton, Voltamp, ABB, Siemens, Schneider. Rating -250 KVA No Load Voltage Ratio (KV) -11/0.433KV No. of Phase 3 Frequency Cycle 50Hz Type - Oil Cooled Type Cooling ONAN Connection -HV/LV -Delta / Star Vector Group - Dyn -11/IS : 1180 Level 2 Tapings on HV Compensation: +5% to -5% In steps of 2.5% Tempearture Rise ( Winding ) Ambient : Not Exceeding 90Deg C. " OFF Circuit" Tap Changer Altitude upto 1000M above M.S.L Externally Hand Operated Oil Conservator with filling hole & cap plain oil level gauge with min. level marking thermometer pocket 4 Nos. Plain roller Uni- directional Silica Gel Breather 1st filling of oil Drain Cum Filter Valve Rating & Diagram Plate Two Earthing Terminals Lifting Arrangement Explosion vent Air Release Plug Oil Temp. indicator with alarm and trip indicator Double Float Buchloz Relay & Conservator Shut Off valve between Buchloz Relay & Conservator Winding Temp. indicator with alarm & trip contact Complete in all respect NS-1

30 : - SITC of LT Capacitor Bank Panel 95KVAR capacity having size 650mm x 1900mm x 500mm made out of 14SWG CRCA sheet for load bearing surfaces & 16SWG for non load bearing surfaces with 2nos. 10 KVAR, 1No. 15 KVAR & 3 Nos. 20KVAR capacity Capacitors alongwith control wiring etc. copmplete in all respect upto the entire satisfaction of Engineer-in-charge of work. Incomer side MCCB 250 A 3P =1No. ROH=1No. SPREADER LINKS =1No. APFC RELAY =1No. MCB SP 2/6A =3Nos. Control Terminal =8Nos. 10 KVAR CAPACITOR FEEDER MCB 32 A TP CAP DUTY =2Nos. CONTACTOR CAP.DUTY. 10 KVAR =2Nos. PUSH BOTTEN =4Nos. ON INDICATION =2Nos. AUTO-MANUAL SWITCH =2Nos. 6 Amp Control MCB SP =2Nos. 15 KVAR CAPACITOR FEEDER MCB 32 A TP CAP DUTY =1No. CONTACTOR CAP.DUTY. 15 KVAR =1No. PUSH BOTTEN =2No. ON INDICATION =1No. AUTO-MANUAL SWITCH =2Nos. 6 Amp Control MCB SP =2Nos. 20 KVAR CAPACITOR FEEDER MCB 63 A TP CAP DUTY =3No. CONTACTOR CAP.DUTY. 20 KVAR = 3Nos. PUSH BOTTEN =6Nos. ON INDICATION =3Nos. AUTO-MANUAL SWITCH =3Nos. 6 Amp Control MCB SP =3Nos. BUS BAR (B) Bus Bar will be of Electrolytic COPPER of size:250A ENCLOSURER ( C) CRCA sheet steel enclosure. Panel will be fabricated with 14SWG CRCA sheet steel for load bearing surfaces and 16SWG for non load bearing surfaces. Tentative Dimensions - 650 X 1900 X 500 MM WIRING (D) Harness for starter & metering, Thimbles, Ferrules, Sleeves, PVC channel, Gourmets, Braided wire for earthing etc HARDWARE (E) (Nuts, Bolts, Spring washers, Door hinges, Door Locks & Key, Lifting hocks, Base channel, C-type Channels, DMC Busbar Insulators etc) ACCESSORIES (F) Danger plate, Feeder detail Inscription plates, Acrylic/Bakelite/Perforated sheet cover for busbar, Door gasket etc. NS-2

31 : - S/E of 11KV gang operated switch Rashtriya / Jayshree / BHEL make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H'pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works. NS-3

32 : - Providing and fixing of 11 KV oil cooled CT/PT :combined unit ratio 20/5 A.0 0.2 (5) VA 5 and PT ratio 11/110 volt AC 0.2 VA / 0 along with ;metering cubicle etc. fixing on H. pole metering cubicle wiring with plate form required to complete the job in all respect upto the entire satisfaction of the engineer it charge of the work. NS-4

33 : - S/E of Rubber mat of size 2mX1m & 12 mm thick suitable for 11 KV complete in all respect upto the entire satisfaction of the engineer it charge of the work. NS-5

34 : - Supply & Erection MS bucket stand which including cost of 6 nos. buckets of 9 liter capacity with sand filling including cost of welding & painting of complete stand & buckets with one coat of red oxide and two coats of approved paint of red colour with all labour & petty material to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. NS-6

35 : - S/E of fire extinguiher ISI marked ABC type 6 kg. capacity powder base with square grip gavle duly erected/hung on wall with hook including the cost of hook, screw etc. with all the all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. (make- Safex/Ceasefire/Minimax) NS-7

36 : - Pdg. & Fixing of Wire Mesh Jali around the Transformer of size 4' x 8' made out of 75 x 25x 3.25 mm Jali fixed with angle iron frame made out of MS Angle 50 x 50 x 6 mm support of MS flat 50 x 6 mm and fixed in CC block 1:2:4 incliding cutting, welding etc. as per drawing complete in all respect upto the entire satisfaction of the Engineer - in - charge. NS-8

37 : - Supply and erection of MS flat 50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge of work. NS-9

38 : - Supply and erection of MS channel 100x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge of work. NS-10