Construction of Indoor Stadium Hall at Pragpur Distt. Kangra (HP) (SH- Providing electrical installation thereof).

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch,modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (a) Group A

Wiring fo Group controlled (looped) light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch,modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (a) Group A

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch,modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (a) Group A

Wiring fo Group controlled (looped) light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch,modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (a) Group A

Wiring forgroup controlled (looped) light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch,modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (switch control primary point )

Same asitem above but secondary points 2.5 Sqmm and point wiring Points to be looped with primary point

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. (a) 2x1.5 Sq. mm.

(b) 2 x 2.5 Sq. mm.

© 2 x 6.0 Sq. mm.

(d) 2 x 10 Sq. mm.

(e) 4 x 10 Sq. mm.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supply and wiring250 v single phase and neutral 2 Nos 6 amps socket outlate with control by 1 No Switched with 2.5 sq.mm PVC insulated copper conductor 1100 volts grade standard flexible FRLS wires in concealed or surface mounted 25MM Dia 2MM Thick PVC conduit including providing and flexing of 6amps 3 PIN switch socket outlet of approved make and design in 2MM thick GL Box with grid plate and earthing of third pin of the socket with 2.5 Sq.mm PVC insulated copper conductor stranded flexible FRLS wire (Maximum four no. of switches socket shall be connected on one circuit)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Supplying and fixing ceiling rose on the existing junction box / wooden block including connections etc. as required.

Supplying and fixing G.I. Modular box of suitable size with modular plate and cover in recess including providing and fixing 25Amp modular socket outlet and 25 amps,SP MCB in/c connections etc. as required.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. Telephone socket outlet, Modular.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:- 2 modules (78mmx78mmx50mm)

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-(a) 5 Pin 5/6 amp socket outlet

(b) 5/6amp switch)

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-6 modules(205mmx78mmx50mm)

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- (a) 25 mm. dia

(b) 32 mm. dia

Supply, Installtion, Testing and commissioning of 5W Mirrior Light (Cat no-Bajaj lighting BCLSB 05 WH or equivalent as specidied in the approved list of make).

Supply, Installtion, Testing and commissioning of 18W Surface mounted LED circular downlighter (Cat no-Bajaj lighting BGSLO SLEEK Surface 18W WH RD or equivalent as specidied in the approved list of make).

Supply, Installtion, Testing and commissioning of 20W wall/Surface mounted 4 ft. LED (Cat no-Bajaj lighting BCLSB 20WH or equivalent as specidied in the approved list of make).

Supply, Installtion, Testing and commissioning of 15W Surface mounted LED Square downlighter (Cat no-Bajaj lighting BGSLO SLEEK Surface 15W WH SQ or equivalent as specidied in the approved list of make).

Supply, Installtion, Testing and commissioning of 36W (Nominal) 2x2 ft. recess mounted LED Luminaire (Cat no-Bajaj lighting BCTBLR 36W ZTN or equivalent as specidied in the approved list of make).

Supply, Installtion, Testing and commissioning of 12W Surface mounted LED Circular downlighter (Cat no-Bajaj lighting BGSLO SLEEK Surface 12W WH RD or equivalent as specidied in the approved list of make).

Supply, Installtion, Testing and commissioning of 80W Highbay Light LED i/c down road (Cat no-Bajaj lighting BGHB 80W LED G V or equivalent as specidied in the approved list of make).

Supply and Installtion or regular/ standard model ceiling fan of 1200mm sweep I/c wiring the down rods of standard length (upto 30 cm) with 1.5 sq.O of approved list of make

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Light duty, (Domestic) 300 mm sweep Cat-a

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (unto 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable and earthing etc. as required:-

SITCof following type compartmentlised wall/ /fioor mounted cubical panel made of crca sheet 2mm thickvermin proof duiiy phosphatised and powder coated in/c bus bar ans all other items required as approved by Engineer in Charge. MDS Panel

INCOMER

INO 100 Amp 4 Pole MCCB 25 KA breakingcapacity ,bus bar of required cppacity and all other itemscomplete in all resect as approve by Enginee-in Charge

METERING & INDICATION : 1 Set of R, Y, B Phase indication lamps

1 set of ON/OFF/TRIP indication Lamps, MFM with communication facility along with cobntroal SP MCB

BUS-BAR: 1 Set of 150A TPN aluminium Bus Bar with colour coded PVC sleeves

OUTGOINGS: 5 Nos. 63A TPN MCCB, 16KA breaking capacity with thermal relese and asjustable setting and rotary HANDLE.

3 Nos. 40A TPN MCCB, 16KA breaking capacity with thermal relese and asjustable setting and rotary HANDLE.

2 Nos. 40A SPN MCB, 10KA breaking capacity [NOTE:Any item necessary for the completion of the system but nopt mentioned in the BOQ shall be i/c by the supplier]

Supplying, Receiving, fixing, testing & commissioning of above described Panel.: Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-12 way

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 40 Amps. Cat-A.

(b) 63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 40 Amps. Cat-A.

(b) 63 Amps. Cat-A.

Supplying and fixing single pole, blanking plate in the existing MCB DB complete as required.

Earthing with G.I. earth plate 600 mmx600 mmx 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Providing and fixing 25mm x 5mm G.I strip in 40 mm dia. G.I. pipe from earth electrode etc. as required.

Supplying and laying 25mmx5mm G.I. strip at 0.50 mtr. Below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required.

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- (a) Double door-6 way (8+18),horizontal type

(b) Double door-8 way (8+24),horizontal type

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps. Cat-A.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:- Armoured cable 35 sq. mm (3.5 core)

Supply of following sizes of XLPE insulated aluminium conductor strip/wire armoured, overall PVC sheathed 1.1 KV grade cable conforming to relevant IS-7098 code and technicalk specifications. 3 1/2 x 50 sqm (supply feed from existing panel)

Supplying and making end termination with brass comperssion gland and aluminium lugs for following size of PVC insulated and PVC sheated/ XLPE aluminium conductor cable of 1.1 KV grade as requried. 31/2 x 50 sqm (50mm)

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. (a) 150mm width x 50mm depth x 1.6mm thickness

(b) 300mm width x 50mm depth x 1.6mm thickness

© 450mm width x 50mm depth x 2mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bend with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. (a) 150mm width x 50mm depth x 1.6mm thickness

(b) 300mm width x 50mm depth x 1.6mm thickness

© 450mm width x 50mm depth x 2mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. (a) 150mm width x 50mm depth x 1.6mm thickness

(b) 300mm width x 50mm depth x 1.6mm thickness

© 450mm width x 50mm depth x 2mm thickness

JAGJIT RAI

raman devwedi

Kumar Enterprises

Ratwan Light House

Vikas Sharma

UNITED ENGINEEER AND CONTRACTOR

DHARMENDER SINGH