Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.1 LAccepted-AOC 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L1 | Accepted-AOC L1 | |
| 2 | L2₹32.2 L+₹6.9 L (27.5%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹35.1 L+₹9.8 L (38.9%)Rejected-Finance 121 MODEL TOWN AMBALA CITY HRY | AMBALA CITY | AMBALA | HARYANA | 134003 | L3 | Rejected-Finance Other than L1 |
Tender Value
₹30.3 L
EMD Value
₹61,000
Closing Date
4 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (P) (AF) Ambala
GE (P) (AF) Ambala, Ambala Cantt
PROVN OF PROJECT OFFICE FOR GE PROJECT AT AIR FORCE STATION AMBALA
2023_MES_617215_2
GE(P)AF/AMB-02/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (P) (AF) Ambala
For MES enlisted contractor Class D category a (i) refer NIT
2 documents required · 2 mandatory
₹500
GE (P) (AF) Ambala
₹61,000
Yes
1 Dec 2023
15 Sept 2023
6 Oct 2023
15 Sept 2023
4 Oct 2023
22 Sept 2023
16 Sept 2023 - 21 Sept 2023
Amount
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Surface excavation, n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified.
Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but n exc 3.0m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified.
Returning, filling in and including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil, complete all as specified and directed.
Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.
M&L for cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.
M&L for treating the bottom and sides of excavation with anti termite solution at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed.
M&L for treating the backfill in contact with foundation with anti termite solutionat the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all as specified and directed.
M&L for treating the top surface of filled earth with anti termite solution at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and directed.
M&L for treating the soil under plinth protection with anti termite solution at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed.
M&L for treating the soil along with external perimeter of building with anti termite solution at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed.
M&L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for mild steel TMT bars of 5mm dia and over upto and incluidng 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for MS flat iron ties of 25x3mm and 25cm long as anchorage to columns and masonry, complete all as specified and directed.
M&L for reinforced cement concrete M-25 Design Mix in foundations, including rafts, footings, fdn beams. Plinth beams, bases of columns etc, basement slabs, under reamed piles and mass concrete, complete all as specified and directed.
M&L for reinforced cement concrete M-25 Design Mix in beams. Cantilevers, bressumers, lintels over 1.5m span, complete all as specified and directed.
M&L for reinforced cement concrete M-25 Design Mix in columns, pillars, piers, posts and struts, complete all as specified and directed.
M&L for reinforced cement concrete M-25 Design Mix in slab supported on walls, beams and columns in floors, roofs, landings in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L for reinforced cement concrete M-25 Design Mix in chajjas, complete all as specified and directed.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, complete all as specified and directed.
M&L for brickwork woth sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and directed.
M&L for brickwork woth sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:4, complete all as specified and directed.
M&L for brickwork woth sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall, built in CM 1:6, complete all as specified and directed.
M&L for providing cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) in copings, and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
M&L for precast cement concrete type A 1, 1:1 1/2:3 (using 20mm graded crushed stone aggregates) set in CM 1 : 4, in landings, cover slabs (for manholes etc), and similar work, complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished flatsurfaces, complete all as specified and directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished flatsurfaces, complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, rough finished flatsurfaces, complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), fair finished surfaces, complete all as specified and directed.
M&L for form work to edges of concrete flats, treads, break in floors, window cills n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide, complete all as specified and directed.
M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished flat surfaces complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces, finished surfaces even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished surfaces even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 with water proofing compound, on fair faces of brickwork or concrete surfaces, finished surfaces even and smooth without using extra cement, complete all as specified and directed. (WPC will be measured separately).
Supply only integral water proofing compound, complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 on fair faces of brickwork or concrete surfaces, finished surfaces even and smooth without using extra cement, in ceiling complete all as specified and directed.
M&L for hardcore of broken stones or boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 100mm thick cement concrete type E-2, 1:5:10 (using 40mm graded crushed stone aggregate) as in sub base of floors, complete all as specified and directed.
M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in base of floors, complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes, complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick of size 600x600mm, polished, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick, polished,of size 300x300mm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surfaces 300x600x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
M&L for granite black 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing ,complete all as specified and directed.
M&L for 20mm thick Granite black machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed.
S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, complete all as specified and directed.
S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
M&L 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
S&F 100mm long butt hinges, mild steelMedium weight, cold rolled and fixed, complete all as specified and directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
S&F aluminium anodised door stopper magnetic type, complete all as specified and directed.
S&F aluminium (die cast) body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
S&F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, complete all as specified and directed.
S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications and drawings.
S&F factory made solid panel PVC door shutters 30mm thick (stiles), consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colout PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PV sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in frame at site as per specifications and drawings.
S&F Powder coated (Thickness or powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified, complete all as specified and directed.
Aluminium powder coated moulded designer grill, Decogrill, pattern or any other pattern or design as approved by GE, fixed with aluminium window frames as per manufacturer's instructions, complete all as specified and directed.
M&L for 50mm thick cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection, complete all as specified and directed.
M&L for preparation of new or previously untreated plastered surfaces and applying two coats of distemper oil emulsion over a coat of primer over a coat of 2mm thick putty including sand papering to achieve even and smooth surface, complete all as specified and directed.
M&L for preparation of new or previously untreated plastered surfaces and chalk whiting on plasterred surfaces, preparatory to distempering and applying two coats of distemper oil emulsion on ceiling, complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of any description over 10 cm in width or girth not otherwise described and applying of two coats of cement base paint over a coat of alkali resistant primer on brick, stone or concrete surfaces, complete all as specified and directed.
M&L for preparation of new or previously untreated wooden surfaces and applying of two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of new or previously untreated steel or iron surfaces and applying of two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.
S&F curtain rod, stainless steel 25mm dia, with fixing brackets and caps etc, complete all as specified and directed.
S&F 1000 Ltr rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.
S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.
S&F vitreous china wash basin, white, flatback, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified and directed.
S&F vitreous china urinal, white, half stall type excluding flushing cistern, flush pipe and waste pipe, including providing and fixing plugs, bedding urinal against wall in cment mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (esclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.
S&F 10 Litres PVC valveless syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, and connection to pipes and fixing chain or pull or lever, if any, complete all as specified and directed.
M&L for 20mm dia steel water tubing medium grade, galvanised with all fittings, laid in floors or fixed to walls and ceilings , complete all as specified and directed
M&L for 15mm dia steel water tubing medium grade, galvanised with all fittings, laid in floors or fixed to walls and ceilings , complete all as specified and directed.
S&F 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F 15mm bore bib taps, fancy type, cast copper alloy, with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F 15mm bore angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 300mm, complete all as specified and directed.
S&F for grating square 150mm size of PTMT (minimum weight 100 gms), complete all as specified and directed.
S&F for grating square 150mm size with waste hole of PTMT (minimum weight 100 gms), complete all as specified and directed.
S&F Reinforced concrete pipes, class NP2, 200mm dia, laid and jointed complete with collar, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and directed.
S&F75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.
S&F 110 mm PVC (SWR) junction single (single T), equal or unequal with access door, complete all as specified and directed.
M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D-2, for 100mm bore pipes, complete all as specified and directed.
S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.
S&F 110mmx75mm dia PVC (SWR) reducers, complete all as specified and directed.
S&F 75mm dia PVC (SWR) vent cowl, complete all as specified and directed.
S&F 75mm dia stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid over sand cushioning 25mm thick and joints filled with fine sand, complete all as specified and directed. (Sand cushoining will be measured and paid separately).
M&L for sand cushioning of 25mm thick, complete all as specified and directed.
M&L for providing, cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.
M&L for point wiring with 1.5 sq.mm FRLS insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn through and including concealed PVC conduit medium grade all as per site requirement including FRLS,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and pressed steel terminal boxes modular type covered with PVC Modular sheet and plate for mounting switch, sockets, fan regulator, etc including making good the disturbed surfaces of walls and paint touch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge.
a) One light /bell /Exhaust fan/Fan Point controlled by one switch
b) One 3 pin 6 Amps socket point controlled by one switch on same board
c) One 3 pin 6 Amps socket point controlled by one switch on independent board
All as per ser item No. 1 here-in-before but for one 15/16 Amps switch socket combination on independent board with 2.5 sqmm cables for phase and neutral and 2.5 sqmm cable green in colour as earth continuity conductor.
Supply and fix Modular switch one way 1 Module 6 Amps,
Supply and fix Modular switch one way 1 Module 16 Amps,
S&F Modular bell push 6 Amp , 1 Module, ,240 Volts ISI marked complete.
Supply and fix Modular socket 6 Amp 2/3 Pin combined 2 Module
Supply & Fix Modular type fan regulator 120W 2 Module
Supply and fixing of Bell multi music type
Supply and fix Ceiling rose, 3 terminal, PVC/ polycarbonate insulated body
Supply and fix Modular socket 16 Amp 2/3 Pin combined 2 Module
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifed and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.All as specifed and directed.
Supply and fixing of GI Pipe Bracket made out of Galvanised Iron Tubing 25mm bore (dia), light grade, 1.50 Metre long bent to shape as per specified for fixing Security Light Fitting including suitable size of clamps and applying Two coats of Aluminium Paint over a coat of Aluminium Primer , complete all as specified and as directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers all as specifed and directed .
Supply and fix ceiling fans, complete with blades, down rods, electronic regulator and accessories, 230V 1200 mm sweep. Min air delievery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specifed and directed.
M&L for sub main wiring 2 run of single core, 6 sqmm FRLS PVC insulated and unsheathed, multi stranded copper conductor Cable FRLS (using colour code as per IS) with and including 6 sqmm FRLS PVC insulated and unsheathed copper conductor multistranded cable (using colour code as per IS) connected to the common earth point and connected to earth dolly drawn through PVC rigid conduit of suitable size, heavy grade (ISI marked) having thickness not less than 1.8 mm (ISI marked) with and including all accessories, complete all as specified and directed. (Note :- Two Runs of single core cable with 1 run of earth cable and PVC conduit shall be measured as one run)
M&L for sub main wiring 2 run of single core, 4 sqmm FRLS PVC insulated and unsheathed, multi stranded copper conductor Cable FRLS (using colour code as per IS) with and including 4 sqmm FRLS PVC insulated and unsheathed copper conductor multistranded cable (using colour code as per IS) connected to common earth point and connected to earth dolly drawn through PVC rigid conduit of suitable size, heavy grade (ISI marked) having thickness not less than 1.8 mm (ISI marked) with and including all accessories, complete all as specified and directed. ( Note :- Two Runs of single core cable with 1 run of earth cable and conduit shall be measured as one run)
Supply and fix TPN DB sheet metal enclosure , Double Door , TPN 4way, 415 Volts sheet steel powder painted IP 43 protection with bus bar, neutral link & earth bar suitable for MCCB four pole 100 Amp etc . Complete all as specified and directed
Supply and fix MCCB 4 Pole .415 V. fixed type, 100 Amps with breaking capacity 16 KA
Supply and fix MCB distribution board double door type, SPN 8 way, 240 Volts sheet steel powder painted IP 43 protection with bus bar, neutral link & earth bar etc. Complete all as specified and directed
Supply and fixing MCB SPN 'B'curve 240 volts ISI marked breaking capacity of 10 KA , 40 Amps capacity, complete all as specified and directed.
Supply and fix MCB, SP, 'B' curve, 6 - 32 Amps, 10 kA ISI marked suitable for 240 volts operation,I , complete all as specified and directed.
Earthing complete with galvanised steel earth plate electrode 60 cm × 60cm.× 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.
Supply , laying , jointing of GI Pipe medium grade of size 40 mm dia including jointing material/ GI fittings in trenches complete all as directed.
Supply , laying , jointing of GI Pipe medium grade of size 25 mm dia including jointing material/ GI fittings in trenches complete all as directed.
Supply and fixing gun metal globe or gate valve with iron wheel head screwed both ends for GI pipe of size 40 mm dia complete all as specified and directed.
Supply and fixing gun metal globe or gate valve with iron wheel head screwed both ends for GI pipe of size 25 mm dia complete all as specified and directed.
M&L for Construction of valve chamber of internal size 900 x 900mm x 1050 mm incl necessary earth work in any type of soil, PCC foundation C-2 (1:3:6) type C2 40mm graded stone aggregate as in base concrete ,brick work in CM 1:6 with 10 mm thick plaster internally and 15 mm thick externally in CM 1:4 , 6 mm thick MS cover with hinges and locking arrangement fixed to angle iron frame made out of 40x40x6 mm MS angles complete with 2 coats of synthetic enemal paint over one coat of red oxide primer on all metal works & three coats of white wash on all plastered surfaces of valve chambers complete all as specified & directed.
Cutting CI/DI/GI pipes of size 150 mm (two cuts) and reducing to required length in position for insertion and including new DI tees of size 150x150x40 mm and reducing to 40 mm dia, branches, etc before laying
M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.
Supply and laying sub class 'B' bricks laid dry and flat size 230 mm x 113mm x 75 mm across the length of cable for protection of cable complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core laid in trenches or under floor or along walls complete all as specified and directed by Engineer-in-Charge.
For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted in total quoted amount of BOQ to arrive contract sum.
S M BUILDERS
Laxmi Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .