CERTAIN DAY TO DAY REPAIRS MAINT OF INTL ELECTRIC WIRING WITH CEILING EXHAUST FAN SUB MAIN AND EARTHING IN MD ACCN AT OL BARODA

Amount

Taking down and Opening of ceiling fan, exhaust fan and wall mounting fans and air circulator fans (any type, make & sweep) at location of installtion for servicing work such as cleaning of fan blade and greasing of bearing with approved quality of grease, cleaning of bushes and oiling etc. and checking of serviceablity of condenser, ball bearing, bushes etc. including testing and rehanging in same position complete. Note: M&L for Replacement of parts and flexible cable shall be measured and paid separately.

S&F in replacement 3 core PVC insulated overall PVC sheathed standed copper conductor cable 0.5sq mm sizes complete

S&F in replacement Ball bearing No 6201 suitable for fan of existing make, type & sweep complete

All as per describe in Item No 03 above but for Ball bearing No 6202

All as per describe in Item 03 above but for Ball bearing No 6203

All as per describe in Item 03 above but for Ball bearing No 6204

S&F in replacement 4 MFD capacitor electronic type suitable for ceiling fan, exhaust fan and cabin fan of existing make, type & sweep complete of following capacity.

All as per describe 07 above but for 2.5 MFD

Taking down defective electric fan and transporting the same to work shop for repairs after checking the serviceabilty of fan in the presence of MES representative and M&L for Rewinding of Ceiling fan of 1200 mm sweep (Any make, type) with existing size of super enameled copper wire of BEST quality including treating with insulation varnish, heating & providing insulating material such as cotten tapes, insulating paper etc and rehanging in position after repairs complete.

All as per describe in Item 09 above but for Ceiling fan of 1400 mm sweep

All as per describe in Item 09 above but for Exhaust fan of 450 mm sweep

All as per describe in Item 09 above but for Exhaust fan of 300/350 mm sweep

All as per describe in Item 09 above but for Exhaust fan up to 250 mm sweep

All as per describe in Item 09 above but for Wall mounted Cabin fan up to 400 mm sweep

All as per describe in Item 09 above but for Air Circulating Fan of size 600 mm sweep

M&L for preparing old painted surfaces of ceiling fan of seeep 1200 mm /1400 mm of any make & type and applying one coat of synthetic enamel paint by spray machine, matching to the existing color including writing the MES No complete .

All as per serial item No 16 but for exhaust fans 225/250/300/350 mm sweep

All as per serial item No 16 but for exhaust fans 450 mm sweep

S&F in replacement prepainted Down rod 300 mm long made out of medium grade MS tubing of size 15 mm bore of following length including cutting drilling, threading, welding etc. complete.

All as per serial item No 19 but for Down rod 600 mm long

All as per serial item No 19 but for Down rod 1000 mm long

S&F in replacement plastic canopy of ceiling fan 1200/1400mm sweep suitable for existing make complete.

S&F in replacement fan prepainted mild steel blade for wall mounted fan/ Air circulator of existing type of 400/600 mm sweep complete.

S&F in replacement MS clamps (Standard size) with rubber reel with MS nut, bolts, check nut & split pin suitable for ceiling fan 1200 mm sweep complate.

S&F in replacement prepainted mild steel fan blade suitable for ceiling fan 1200 mm sweep of any make complete

All as per serial item No 25 but for 1400 mm sweep

S&F in replacement prepainted mild steel fan blade suitable for exhaust fan up to 300 mm sweep of any make complete.

All as per serial item No 27 but for 450 mm sweep

M&L for cutting of bearing cover housing for fixing & seating of one ball bearing suitable as per existing fan shaft diameter of any type and size of ceiling fan for replacement of bush by means of turning on lathe machine (ball bearing shall be measured & paid separately) complete.

S&F in replacement ceiling fan shaft made out of vanadium steel suitable for 1200 mm sweep ceiling fan complete.

S&F in replacement gun metal bush of any size suitable for ceiling fan exhaust fan/pedestal fan/wall mounted fan etc. Complete.

S&F in replacement die cast rotor of ceiling fan motor

S&F in replacement die cast stator of ceiling fan motor

S&F in replacement blade screw suitable for various sizes/make ceiling fan

S&F ceiling fan 1200 mm sweep including fixing of down rod and connection with & including provision of flexible three core PVC insulated multi-stranded copper conductor cable of size 0.50 sq mm from ceiling rose/connector to fan and similar to Model Asset 50 of Crompton Greaves complete. Note: Old UNSV Ceiling fan will be deposited to AGE E/M office through RV.

S&F of Exhaust fan 200 mm sweep, PVC rust proof body & blades, with louvers for protection from birds, 230 Volt AC supply, connecting up including provison of cable from ceiling rose to fan and Similar to Model Brisk air HS 8" of Crompton Greaves complete. Note: Old UNSV Exhaust fan will be deposited to AGE E/M office through RV.

Supply, fixing, testing & commissioning of Metal body exhaust fan 225 mm sweep, 230 Volt AC supply (single phase), with louvers and connecting up including provison of PVC insulated overall PVC sheathed copper conductor cable from ceiling rose to fan and Similar Model No.Trans air 9" of Crompton complete. Note: Old UNSV Exhaust fan will be deposited to AGE E/M office through RV.

Supply, fixing, testing & commissioning of Iron body exhaust fan 300 mm sweep 1400 RPM with minimum airflow/air delivery 1710 Cmh, totally enclosed heavy duty motor, die cast aluminium rotor mounted on double ball bearing, IP-55, polarity-4, 230 Volt AC supply (single phase), rated power input not more that 90watt, with louvers fixed outside bldg for auto opening and closiing and connecting up including provison of PVC insulated overall PVC sheathed copper conductor cable from ceiling rose to fan and Similar to Crompton Greaves model No EXHD300-4-1 complete.

Supply, fixing, testing & commissioning of exhaust fan 450 mm sweep with minimum airflow/air delivery 1710 Cmh, totally enclosed heavy duty motor, die cast aluminium rotor mounted on double ball bearing, IP-55, polarity-4, 230 Volt AC supply (single phase), rated power input not more that 90watt, with louvers and connecting up including provison of PVC insulated overall PVC sheathed copper conductor cable from ceiling rose to fan and Similar to Crompton Greaves model No EXHD450-4-1 complete. Note: Old UNSV ceiling fans will be deposited to AGE E/M office through RV.

S&F Wall mounted fan 400 mm sweep including fixing and connection complete with & including provision of flexible three core PVC insulated multi-stranded copper conductor cable of size 0.50 sq mm from ceiling rose/connector to fan Model WM Hiflo Wave of Crompton complete. Note: Old UNSV ceiling fans will be deposited to AGE E/M office through RV.

Taking down and refixing storage type water heater (geyser) 25/35 Litres capactity (any type & Make ) from wall by disconnecting the electric connection and water inlet/outlet connection from supply end checking the serviceability of all parts such as inner vessel, rubber gasket non return valve, heating element, thermostat etc. and refixing the same after replacing unserviceable parts and reassembling complete:-. Note : M&L for Replacement of spare parts shall be measured and paid separately.

All as per serial item No 07 but for 50 litres capacity

S&F in replacement of heating elements, 1.5 KW 230 volts of existing type & make (Round/triangular) complete.

S&F in replacement of heating elements, 2 KW of existing type (Round/triangular) complete.

S&F in replacement of thermostat of existing type & make 15 Amps, 230/250 volts AC ISI marked complete .

S&F in replacement safety valve as per existing make and type, ISI marked complete

S&F in replacement of PVC flexible conneciton pipe with two brass check nuts & two plastic washers complete.

S&F in replacement of indicator lamp assembly LED type RED/GREEN for geyser complete

S&F for replacement of metal clad box with plug and socket 20 Amps with one MCB SPN of 20 Amps. complete .

S&F in replacement of plate assembly with stainless steel plate and pipes (intel, outlet and vent) and rubber gasket fixed inside the geyser suitable for 25 ltrs capacity geysers as per existing pattern complete.

All as per serial item No 50 above but for 50 ltrs capacity geysers complete

M&L for Painting of geyser with white synthetic enamel paint one coat after preparation of old surfaces by scrapping rust / scales etc as required at site for Geyser 25 ltrs capacity including writing MES No. complete

M&L for Painting of geyser with white synthetic enamel paint one coat after preparation of old surfaces by scrapping rust / scales etc as required at site for Geyser 50 ltrs capacity including writing MES No. complete

S&F in replacement gun metal non return valve 15 mm dia including making proper connection complete.

S&F in replacement stop valve cast copper alloy, screwed down high pressure screwed both ends for iron pipe of 15 mm bore fancy type chromium plated complete.

S&F in replacement 3 core PVC insulated overall PVC sheathed standed copper conductor cable 2.5sq mm sizes complete.

S&F in replacement of heating elements, 2 KW (with base round / trianglualr coil / Spiral type) complete.

S&F in repairs stainless steel inner tank suitable for 25/35 ltrs capacity water heater.

All as per serial item No 58 above but for 50 ltrs capacity geysers complete

S&F 25 litre storage water heater, rated power consumption not more than 1500W, current leakage protection device, multi functional safety valve, high precision thermostat control, preset thermal output, high working pressure 0.8MPa ideal for high rise building, vertical mounting, Operating voltage 230 volts including all fittings complete & provision of flexible three core PVC insulated multi-stranded copper conductor cable and similar to HAVELLS cat part No GHWAMGTWH025 Monza DX complete. Note : Old unserviceable Geyser shall be deposited to AGE E/M office/store yard through RV.

S&F 50 litre storage water heater, rated power consumption upto 2000W, current leakage protection device, multi functional safety valve, high precision thermostat control, preset thermal output, high working pressure 0.8MPa ideal for high rise building, vertical mounting, Operating voltage 230 volts including all fittings complete & provision of flexible three core PVC insulated multi-stranded copper conductor cable and similar to HAVELLS cat part No HWAMESWH050 complete. NOTE : Old unserviceable Geyser shall be deposited to AGE E/M office/store yard through RV..

S&F in replacement switch piano flush type single pole, one way 6amp complete.

S&F in replacement electronic type fan rgulator, not less than 100 watt single phase 230V complete.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal.

S&F in replacement Modular type switch 1 way 6A, 1module, 230 V,AC 50Hz ISI Marked with valid CML No. complete

S&F in replacement Modular type switch 1 way 20A, 1module, 230 V,AC 50Hz ISI Marked with valid CML No. complete

S&F in replacement Modular type socket outlet multipurpose having provision for 3 pin 16A and 3 pin 6A, 2 module, 230 V,AC 50Hz ISI Marked with valid CML No. Complete

S&F in replacement Modular type Fan step regulator electronic type, 230V, 120W - 2 module ISI marked with suitable CML No and connecting upto complete

S&F in replacement 3 pin Plug top 230V,15/16A ISI marked with suitable CML No and connecting upto complete

Taking down existing UNSV copper/aluminium point wiring (light, fan, socket or power) and M&L for Point wiring with 1.5 sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated unsheathed (FRLS) cable enclosed in 20mm dia medium grade PVC conduit with accessories ISI marked fixed on surface of walls/ceilings by means of PVC Sleeves / dash fastness and cadmium screws all as per IS fittings mounted on terminal box with 3 mm thick phenolic laminated sheet top cover concealed in wall. The thickness of sunken box shall be 1.2 mm. The cover shall be fixed to terminal box with brass screws incl 1.5 sqmm single core cmultistranded PVC insulated but unsheathed cable as earth continuity conductor to common earth dolly drawn in same conduit for One light controlled by one switch 6 amp one way complete.

All as per serial item No 70 above but for One fan point controlled by one switch 6 amp one way

All as per serial item No 70 above but for One bell point controlled by one switch 6 amp one way

All as per serial item No 70 above but for One 3 pin switch socket combination 6 amp on the independent board.

All as per serial item No 70 above but for One 3 pin switch & socket on same board with other switches.

All as per serial item No 70 above but for One light point controlled by two way switches

All as described as per item No 70 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board complete.

S&F in replacement tube light 28W tubular fluorescent lamp complete.

S&F in replacement 9W LED Bulb suitable for B22 holder complete.

S&F in replacement 7W LED Bulb suitable for B22 holder complete.

S&F in replacement 1x 4' feet 1X18W LED tube rod on replacing existing 36/40watt tube rod, electronic ballast at site as per user requirement,230V 50 Hz. The LED tube light conforms to applicable IS 10322/EN 60598 and similar to Havells model No : PHOTONULTRA 1213T8SSTL18WLED865SPC complete.

Supply, Fixing, Testing and commissioning in replacement of 4' LED fitting not less than 1 X 18W LED Batten with LED tube rod not less than 18 watt and Similar to Batten cat Part No.REGALBATTEN8UPTO1X22w SSBSWH and LED tube light cat part No.PHOTONULTRA 1213T8SSTL18WLED865SPC of Havells complete.

Supply, Fixing, Testing & Commsioning in replacement of IP65 integral LED Bulk Head luminaire. Power Consumption should not exceed 10W (Including Driver Loss) and Similar to cat Part No. RUGBYNEONFT10W LED760SSYMBOPC of Havells complete.

Supply, Fixing, Testing & Commisioning in replacement of 2' not less than 10W Mirror LED Batten .Mounting on two PVC square boxes of size not less than 75mm X 75mm complete including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose and similar to Model-ENDURALINEARNEOBS10W LED 830SPCWH of Havells complete

S&F in replacement wall security light LED type not less than 25W . The Luminaire connecting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose and similar to Model-ENDURAPEARLSL25WLED757SASYTOPC of Havells complete

M&L in replacement of 25 mm bore light grade GI pipe fixed as bracket, on wall any type, not less than 1.0 m long and bent to shape as required complete with sutiable clamp made out of 25x4mm Flat iron duly fixed 12mm dia nuts, bolts, washers etc.suitable for steel tubular / PCC pole complete.

S&F in replacement Electronic ballast 28 watt complete

S&F in replacement tube light 28W tubular fluorescent lamp complete.

S&F in replacement flush type bell push 6 amp duly marked for bell complete.

S&F in replacement Electronic ding dong bell AC 230V single pole .

S&F in replacement Distribution board SPN 12 way Double door including fixing and connecting of mounting MCBs isolator, ELCBs etc factory made, confirming to IS:13032 fabricated out of CRCA sheet. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all way complete.

All as per serial item No 90 above but for SPN 8 way

S&F in replacement MCB DB's TPN 63 Amps 10 KA rupturing capacity conforming to IS-8828 complete

All as per serial item No 92 above but for MCB SPN 5 to 40 Amps.

All as per serial item No 92 above but for MCB SP 5 to 40 Amps

M&L in replacement Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

Gayatri Associates

Badri Electricals

motwani and associate

Shree Vaishno Enterprises