Construction Of Women Skill Development Center at F.P.No. 06+109, T.P.S.No. 26 ( Makarba) + 25 (Vejalpur Sarkhej, Ward, South West Zone, Ahmedabad.

Name of Work : Construction Of Women Skill Development Center at F.P.No. 06+109,

T.P.S.No. 26 (Vejalpur) In Sarkhej Ward, South West Zone, Ahmedabad.

Bill of Quantities

Sr. No. Qty Unit Rate Per Amount

Civil Work Estimate

1 Demolition & Dismantling work

Demolition of RCC work using Hydra

Breacker including stacking of servicable

materials and disposal of unservicable

materials with all lead and lift.Removal Of

Existing Building Foundation and Super

Structure If Any.

Demolition of Brick work and stone masonry

including stacking of serviceable materials

and disposal of unserviceable materials with

all lead and lift.(ii) In Cement Mortar.Removal

Of Existing Building Foundation and Super

Structure If Any.

Dismentaling of sheet roofing including ridges,

c Hips, Valleys, Gutters etc. stacking of

serviceable materials and disposal of

unserviceable materials with all lead and lift.

i 5.00 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 5.00 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including distempering

d 1000.00 and stacking the materials with all lead and 3.63 Kg.

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

e 2.00 architraves, hold fasts and other attachment 185.85 Each

etc. complete and stacking them with in all

lead and lift. (i)Notexceeding 3 Sq.M. in area.

Removing & Scrapping of Old deteriorated

Plaster of any thickness from Masonary /

R.C.C. member including stacking of

serviceable material & disposal of un

serviceable from site of work with all lead &

Dismentaling any type tiled of stone floors laid

g 45.00 in mortar including stacking of serviceable 47.25 Sq.M.

materilas and disposal of unserviceable

materials with all lead and lift.

Excavation for foundation including sorting

2 out stacking of useful material & disposing of

excavated stuff upto 50 mt. lead. Loose & Soft

soil.Excexuted With Mechanical Effort

a 2526.00 up to 1.5 mt. depth 115.92 Cu.M.

c 3025.00 3.0 to 5.0 mt. depth 141.11 Cu.M.

d 1154.00 above 5.00 mt. depth 162.02 Cu.M.

e 500.00 Add extra for Disposing off the excavated stuff 17.28 Cu.M.

of above items for lead of (A) 50 m to 100 m

f 2000.00 Add extra for Disposing off the excavated stuff 34.56 Cu.M.

of above items for lead of (B) 100 m to 200 m

g 500.00 Add extra for Disposing off the excavated stuff 51.84 Cu.M.

of above items for lead of (C) 200 m to 300 m

h 500.00 Add extra for Disposing off the excavated stuff 76.80 Cu.M.

of above items for lead of (D) 300 m to 400 m

i 500.00 Add extra for Disposing off the excavated stuff 128.00 Cu.M.

of above items for lead of (E) 400 m to 500 m

Providing and installing cast in situ single

under reamed piles of specified diameter and

length below pile cap, excluding the cost of

Concrete, steel reinforcement but including

j the cost of boring with bentonite solution and

the length of the pile to be embedded in pile

cap etc. all complete. (Length of pile for

payment shall be measured upto to the

bottom of pile cap) :

i 10.00 400 mm dia. Piles 638.83 Rmt.

ii 20.00 450 mm dia. Piles 705.03 Rmt.

Extra over single under ream for providing

additional bulbs in under reamed piles, under

k specified diameter excluding the cost of

Concrete, steel reinforcement (only the nos.

of extra bulbs are to be paid).

t 1.00 400 mm dia. Piles 813.05 Each

ii 2.00 450 mm dia. Piles 1103.43 Each

Provdg. & laying cement concrete 1:5:10 (1

cement : 5 course sand : 10 hand broken

3a 1.00 aggregates 40 mm nominal size) and curing 2492.51 Cu.M.

complete, excluding cost of form work in

foundation & Plinth.

Provdg. & laying cement concrete 1:3:6 (1

3b cement : 3 coarse sand : 6 hand broken stone

aggregates 40 mm nominal size) and curing

complete excluding cost of form work in

415.00 (A) Foundation and plinth 2976.00 Cu.M.

3c 194.00 Supplying of graded hand brocken stone size 983.93 Cu.M.

of 90 mm to 127 mm at site (Rubble or Spoul)

Labour charges for spreading the spouls

mm to 127 mm thick layer good earth filling in

voids correcting the grade & camber comp.

with rolling, watering, incl. preparing

thesurface by brushing for removing all loose

or dirts ect.comp.

Provdg. & laying cement concrete 1:4:8 (1

cement : 4 coarse sand : 8 hand broken stone

4 2.00 aggregates 40 mm nominal size) and curing 2653.67 Cu.M.

complete excluding cost of form work in

foundation& plinth.

Filling available excavated earth (excluding

rock) in trenches, plinth, sides of foundations

5 2500.00 etc. in layers not exceeding 20 cm. in depth 129.10 Cu.M.

consolidation each deposited layer by

ramming and watering.

Conveyance charges of earth lime, murrum,

6 building rubbish, manure, garbage, sludge,

excavated rock, fly ash, aggregate of any kind

a 500.00 Conveyance charges upto 1 km 320.20 Cmt

b 500.00 Conveyance charges upto 2 km 347.73 Cmt

c 10000.00 Conveyance charges upto 5 km 408.41 Cmt

d 10000.00 Extra For Lead on Above Item Above 5 km & 9.26 Cmt

e 10000.00 Extra For Lead on Above Item Above 6 km & 9.26 Cmt

f 10000.00 Extra For Lead on Above Item Above 7 km & 9.26 Cmt

g 10000.00 Extra For Lead on Above Item Above 8 km & 9.26 Cmt

h 10000.00 Extra For Lead on Above Item Above 9 km 9.26 Cmt

Filling in plinth with sand under floors

7a 15.00 including watering, ramming, consolidating, 455.63 Cu.M.

compacting and dressing etc. completed.

Filling in foundation and plinth with murrum or

7b 150.00 selected soil in layers of 20 cm. thickness 286.20 Cmt

including watering, ramming and

consolidating etc. Complete.

Brick work using common burnt clay building

8 bricks having crushing strength not less than

35 kg/Sq. cm. in cement mortar 1:6 (1 cement

: 6 fine sand) conventional brick

a 101.00 (a) in foundation & Plinth 3981.21 Cu.M.

b 221.00 Super structure Upto Floor Two Level 4253.46 Cu.M.

c 406.00 Super structure Above Floor Two Level 4293.55 Cu.M.

I.Half brick masonry in common burnt clay

building bricks having crushing strength note

9 less than 35 Kg/Sq. Cm. in cement mortar 1:4

(1 cement : 4 coarse sand) using conventional

brick in Super structure upto floor Four level

a 503.00 All Floor Level 646.70 Sq.M.

Providing and laying controlled cement

concrete of M-25 Grade and curing complete,

10.1 Excluding the cost of form work, Scaffolding,

cost of reinforcement for reinforced concrete

work For any Height up to any FloorLevel.

a 19.00 Foundations,Raft,Footings,Mass concrete 4238.04 Cu.M.

b1 2.00 RCC Retaining wall at All Floor 4519.88 Cu.M.

Tie-Beam, Lintel , Beam- Bracket, Stair Case

c1 13.00 & Landing, Coping ,Slab, balcony, weather 4496.07 Cu.M.

shed, loft , any cantilever etc All Floor

d1 10.00 Columns,Pillars, posts and struts at All Floor 4593.91 Cu.M.

Providing and laying controlled cement

concrete of M-20 Grade and curing complete,

10.2 Excluding the cost of form work, Scaffolding,

cost of reinforcement for reinforced concrete

work For any Height up to Floor Four Level.

a 5.00 Foundations,Raft,Footings,Mass concrete 3977.88 Cu.M.

Tie Beam , Lintel , Beam- Bracket , Coping

b1 73.00 ,landing, Slab, balcony, weather shed, loft , 4460.36 Cu.M.

any cantilever etc at All Floor

c1 2.00 Column at All Floor 4558.20 Cu.M.

d1 1.00 Stair Case All Floor 5418.91 Cu.M.

Providing and laying in position Ready Mixed

M250 grade concrete for reinforced cement

conctere work , using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to

site of work in transit mixer for all lead having

continuous agitated mixer, manufactured as

per mix design of specified grade for

reinforced cement concrete work including

10.3 2789.00 pumping of R.M.C. from transit mixer to site of 4853.56 Cu.M.

laying with all lead and lift, excluding the cost

of centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer - in

charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained)

(Cement level 450 kg )

Providing and laying in position Ready Mixed

M200 grade concrete for reinforced cement

conctere work , using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to

site of work in transit mixer for all lead having

continuous agitated mixer, manufactured as

per mix design of specified grade for

reinforced cement concrete work including

10.4 3.00 pumping of R.M.C. from transit mixer to site of 4793.10 Cu.M.

laying with all lead and lift, excluding the cost

of centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer - in

charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained)

(Cement level 400 kg )

Drilling suitable holes in reinforced or plain

cement concrete with power driven drill

machine to a minimum depth of 80mm upto

250mm in RCC beams, lintels, columns and

slabs to introduce steel bars for

sunshades/balconies including fixing the steel

bars in position using Hilti Chemical HY200-R

but excluding the cost of reinforcement, all

complete as per direction of Engineer-In-

8 mm Dia in 80 mm Deep & 12 mm Dia

b 960.00 10 mm Dia in 100 mm Deep & 14 mm Dia 263.66 Each

c 960.00 12 mm Dia in 120 mm Deep & 16 mm Dia 343.80 Each

d 80.00 16 mm Dia in 160 mm Deep & 20 mm Dia 608.63 Each

e 35.00 20 mm Dia in 200 mm Deep & 25 mm Dia 1024.44 Each

f 15.00 25 mm Dia in 250 mm Deep & 32 mm Dia 1938.54 Each

Providing and laying controlled cement

concrete 1:2:4( 1cement : 2 coarse sand :

Graded stone aggregate 20 mm nominal size

) and curing complete, Excluding the cost of

form work and reinforcement for reinforced

concrete work in:

a 1.00 Foundations, footings, base of 3923.53 Cu.M.

columns,grade slab and mass concrete.

slab, landing shelves, Balconies, lintels,

b 1.00 beams, girders, and cantilever, up to aany 4012.47 Cu.M.

P/A Trimix with dewatering machine and

floater machine on constructed R.C.C. work

incl. cost of machine and labour etc. comp. as

Making 15 mm Groove in R.C.C work on road

d 950.00 and filling it with poly sulfied selant and 30.00 Rmt

finished it good incl. all labour charges etc.

comp. as directed

Providing and laying and fixing 25 mm thick

expansion joint by hydrocell semi rigid UV

e 9.00 resistance with high performance laminated 738.13 Sqmt

closed cell polythene foam joint filler in sheet

foam as directed, etc. complete.

Providing form work in ordinary timber

planking so as to give a rough finish including

centering, shuttering, strutting and propping

12 etc. height of propping and centering below

supporting floor to celling not exceeding 4 M

& removal of the same for in situ reinforced or

plain concrete work in

a 799.00 (A) Foundation, footings, bases of columns 171.68 Smt

etc. and mass concrete.

b 4679.00 (B) Flat surface such as soffits of slabs, 252.00 Smt

landing and the like

c 3089.00 (C) Vertical surfaces such as walls (any 229.95 Smt

thickness) partitions.

(D) Columns, pillars, posts & struts.

d 2610.00 (1) Square, rectangular, polygonal in plan 297.68 Smt

e 20.00 (2) Circular or curved in plan. 422.10 Smt

(H) (1) Sides and soffits of beam, haunchings

f 5608.00 cantilevers, girders, bressumers, Coping and 192.15 Smt

lintels not exceeding 1 M in depth.

(2) Sides and soffits of beam, haunchings

g 10.00 cantilevers, girders, bressumers and lintels 259.88 Smt

exceeding 1 M in depth.

h 250.00 (L) chullah hoops, weather sheds, chhajas, 155.78 Smt

carbels etc including edges.

i 250.00 (M) Staircase with-sloping or stepped soffits 242.55 Smt

incl. risers & strings excluding landing.

Extra for additional height of propping and

centering where the height of propping and

j 800.00 centering exceeds 4 .O M between supporting 386.48 Smt

floor to ceiling including temporary brick or

stone pillars for supporting as required.

(i)Height more than 4.0 M.and upto 5.0 M.

Extra for additional height of propping and

centering where the height of propping and

k 150.00 centering exceeds 4 .O M between supporting 573.30 Smt

floor to ceiling including temporary brick or

stone pillars for supporting as required.

(i)Height more than 6.0 M.and upto 7.0 M.

Providing T.M.T Fe 500D bar reinforcement

13 for R.C.C. work including bending, binding

and placing in position complete up to any

a 335260.00 All Floor Level 75.46 Kg.

Providing and laying polished Kota stone slab

(Polished / River Finish, Green colour )

flooring over 20 mm. (average) thick base of

14 170.00 cement mortar 1:6 (1 cement : 6 coarse sand) 982.83 Sq.M.

or lime mortar 1:1.5 laid over and joined with

grey cement slurry including rubbing and

polishing complete.25 mm th.

Providing and laying polished Kota stone slab

25 mm. thick in Platform ,Riser of Stair

Skirting, Tread , dado and pillars laid on

15 133.00 mm. thick cement mortar 1:3 (1 cement : 3 1176.03 Sq.M.

coarse sand) jointed with grey cement slurry

including rubbing and polishing and MAking

groove where it is Required etc. compl

Providing and laying white/Colur glazed tiles

mm thick in flooring treads of steps and

16 5.00 landing laid on a bed of 12 mm thick cement 908.17 Sq. M.

mortar 1:3 (1 cement : 3 coarse sand) finished

with flush pointing in white cement.

Providing and layingWhite / Colour glazed

tiles of size 600 mmx300mm x 8 mm /

17 274.00 mmx 450mm x 8 mm in skirting, risers of 1426.95 Sq. M.

steps, Floor and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand)

and jointed with white cement slurry.

Providing and laying marble stone slab

flooring over 20 mm. (Average) base of

18 2.00 cement mortar 1:6 (1 cement: 6 coarse sand) 2194.63 Sq. M.

or L.M. 1:1.5 laid and jointed with grey cement

slurry including rubbing and polishing

complete: (A) Marble slab 25 mm. thick.

Providing and laying Vitrified tiles 8 to 10 mm

thick , 24'' x 24'' in flooring treads of steps and

19a 2835.00 landing laid on a bed of 12mm thick cement 1062.50 Sq. M.

mortar 1:3 (1-cement : 3-coarse sand)

finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm

thick , 24'' x 24'' in skrting risers of steps and

19b 891.00 dedo on 10mm thick cement plaster 1:3 1130.15 Sq. M.

(1cement : 3-coarse sand) and jointed with

white cement slurry

P & L 24" x 24" vitrified 8 mm thick tile flooring

20 mm (average) base of cement mortar 1:6 (

1cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material

including dismentaling of existing flooring and

jointed with color cement slurry including

finised with flush pointing & cleaning the

surface etc. complete for Antiskid

Providing and laying Ceramics tiles 6 to

mm thick in flooring, treads of steps, landing

20 5.00 and dedo on 12 mm. thick cement plaster 1:3 960.47 Sq. M.

(1 cement : 3 coarse sand) and jointed with

white cement slurry.

Providing & Laying 18 mm thick Mirror polish

granite For flooring , counter , stair -riser

tread , skirting , dedo , Jambs etc. machine

cut or chiselled on bed of cement mortar 1:1

pointing with neat cement slurry incl.

moulding, Making grooves where it is required

etc. comp. as per instruction of engineer in

Provdg. 20 mm. thick Finish / Mala cement

plaster in single coat on fair side of brick /

22a concrete walls for interior plastering upto any

Floor level and finished even and smooth in

i 4876.00 All Floor Level 190.58 Sq.M.

Provdg. 20 mm. thick Finish / Mala cement

plaster in single coat plastering on ceilings,

b Beam side and sofits of stairs upto any Floor

level and finished even and smooth in

i 5015.00 All Floor Level 215.15 Sq.M.

Providing & fixing 23 cm wide chicken mesh

c 115.00 jali with nails & then application of 15 mm 292.59 Sq.mt

plaster on R.C.C. & masonary joints as per

dir. of engg. In charge.

Providing and mixing water proofing materials Per Bag

in cement mortar in proportion recommended of 50 Kg

by the manufacturer. etc. comp. as per of

instruction of engineer in charge. Cement

Providing 20 mm th. Double coat Sand face /

Mala Cement Plaster on Walls upto any

23a 2940.00 Height Above Ground level consisting of 12 297.68 Sq.M.

mm th. Backing coat of C.M. 1:3 ( 1 cement :

3 Ssand ) & 8 mm th. Finishing coat of C.M.

1:1 ( 1 cement : 1 sand ) ets. Complete.

White / Color washing with lime on

undecorated wall surfaces (two coats) to give

24a 50.00 an even shade including thoroughly brooming 12.29 Sq.M.

the surface to remove all dirt, dust mortar

drops and other foreign matter.

Providing & Applying 3 mm thick External

Wall Rustic Type Texture as per Design &

24b 2400.00 Make as Approved by Consultants / 424.92 Sq.M.

Engineer in Charge. Work Includes All

Necessary Scaffolding Work upto Any Height.

Finishing walls with Acrylic Smooth exterior

paint of required shade :New work (Two or

24 c 2800.00 more coat applied @ 1.67 ltr/10 sqm over and 174.97 Sq.M.

including priming coat of exterior primer

applied @ 2.20 kg/10 sqm)

P./L. METALIC HERITAGE SURFACE

Providing and fixing of HERITAGE textured

homogeneous wall finishing system from

BAKELITE HYLAM LTD or equivalent make

consisting of a two component system of (25

kgs per Pack) made of 92% silica particles

coated with fade resistant pigments, 100%

acrylic polymer bonding agent (5kgs per pack)

with the applied thickness of the coating being

between 0.8mm-1.2mm to be applied on

acured, smooth level plaster without keying,

as per the shades/combinations approved, as

per the manufacturer directions, for usages,

tobe applied by an approved applicator of the

manufacturer, as per the directions /

supervision of the engineers in charge, all

complete. Includes All Necessary Scaffolding

Work upto Any Height.

Providing and Fixing 18 mm thick concrete

base exposed brick cladding including surface

24e 240.00 waterproffing, polymer modified tile adhesive 3574.35 Sq.M.

and polymer modifies tile grout ( grey / white)

with neccesary scafolding etc compl. As per

direction of engg. Incharge.

Wall Painting (two coats) with plastic emulsion

/ Oil paint of approved brand and manufacture

and of shade required on undecorated wall

surfaces to give an even shade, over and

25a 8700.00 including a priming coat with alkali resistance 78.44 Sq.M.

primer of approved brand and manufacture

after thoroughly brushing the surface free

from mortar droppings, and other foreign

matter and also including preparing the

surface even and sand -papered smooth

Extra over above item for every subsequent

b 8700.00 coat of of wall painting with plastic emulsion / 33.39 Sq.mt.

Oil paint of approved brand.

Applying two coats of Birla (white cement

based) or Asian (acrylic lapy-putty) or

equivalent & two coats of primer of approved

brand and manufacture on new wall surface

to give an even shade including thoroughly

brushing the surface free from mortar

dropping and other foreign matter and sand

papered smooth.

Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

mt.,refilling, trasporting the pipe to work site,

unloading, lowering in trenches, laying and

jointing the pipes in c.m. 1:1 incl. all jointing

26 materials such as cement, sand, hemp,

bitumen as dire. testing the pipe line to a head

of 1.5 mt. and hydraulic test as dire incl.

watering trenches, spreading , and carting

away of surplus earth within 100 mt.lead as

dire. etc. comp.

a 120.00 23 cm dia. 344.64 Rmt

Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

mt.,refilling, trasporting the pipe to work site,

unloading, lowering in trenches, laying and

jointing the pipes in c.m. 1:1 incl. all jointing

materials such as cement, sand, hemp,

bitumen as dire. testing the pipe line to a head

of 1.5 mt. and hydraulic test as dire incl.

watering trenches, spreading , and carting

away of surplus earth within 100 mt.lead as

dire. etc. comp.

b 25.00 15 cm dia. 288.23 Rmt

c 15.00 10 cm dia. 211.05 Rmt

Constructing brick masonry chamber for

under ground C.I. Inspection chamber and

bends with bricks having croshing strength

not less than 35 Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Lightduty) 455mm x

mm intenal dimensions total weight of cover

with frame to be not less than 38 Kg. (Wt. of

27 14.00 cover 23Kg.) and Wt. of frame 15Kg.) 3863.85 No.

(R.C.C.top slab with 1:2:4 mix (1-cement:2-

coarse sand:4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster

15 mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i)

Inside dimensions 455 mm x 610 mm and up

Constructing Manhole with R.C.C. top slab in

1:2:4mix (1-cement: 2-coarse sand:4-graded

stone aggregate 20 mm nominal size)

foundation concrete 1:3:6 mix (1-cement:3-

coarse sand:6-Brick bats 40+50mm size)

inside plastering 15mm thick with Cement

Mortar 1:5 (1-Cement:5-coarse sand) finished

with a floating coat of neat cement and

making channels in cement concrete 1:2:4

mix (1-Cement:2 -Coarse sand:4-stone

28 a 4.00 aggregate 20 mm nominal size) finished 19139.10 No.

smooth complete including curing and festing

(i) Inside size 900mm x 1200mm and up to

1.5M. deep including C.I. cover with frame

size 560 mm diameter total weight of cover

and frame to be not less than 128kgs. (Wt. of

cover 64Kg. and Wt. of frame 64Kg.) (A) With

230 mm thick walls of brick masonry using

brick having crushing strength not less than

35Kg./Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2)B type depth up

Providing and fixing white vitreous china flat

back or wall corner type lipped front urinal

basin of 340x280x470 mm sizes respectively

with standard flush pipe, Waster Pipe, Waste

Coupling, PVc Connection and G.I clamps

complete, including painting of fittings and

brackets, cutting and making good the walls

and floors wherever required : Cera Model

No. S4020103 or Equivalent

Providing and Fixing of C.P. Brass BIB Cock

of 15 mm Dia of Jaquar make florentine

b 50.00 series model no. 5047n or equivalent make 1564.17 No.

with all necessary fittings. as approved by

Engineer - in - charge.,

Providing and fixing brass screw down Angle

stop tap.(A) 15mm dia. Of Jaquar make

c 50.00 florentine series modelno. 5053n or 1160.57 No.

equivalent make with all necessary fittings.

as approved by Engineer - in - charge.,

Providing and fixing C.P. brass shower rose

d 6.00 with 15mm or 20mm inlet Shower Arm.(A) 279.37 No.

100mm dia. Each

Provding and Fixing of autoclosing pressmatic

pillar cock / bib cock with all necessary fittings

of Polished Bright Chrome Finish of Jaquar

e 12.00 make model no. 031L65 or equivalent make 3280.52 No.

as approved by Engineer in Charge. Rate

including of cost of labour, material etc. in

complete manner.

Providing and Fixing of C.P. Brass Two Way

Bib Cock of 15 mm Dia of Jaquar make

f 22.00 model no. 041kn or equivalent make 1411.58 No.

approved make with all necessary fittings. as

approved by Engineer - in - charge.,

Providing and Fixing of C.P. Brass urinal

Valve Auto Closing System With Full Built in

Control Cock & Wall Flange of 15 mm Dia of

g 5.00 Jaquar make model no. 077 or equivalent 2568.08 No.

make approved make with all necessary

fittings. as approved by Engineer - in -

Provdg. & laying S.W. Gully trap with C.I.

garting brick masonry chamber & water tight

30 12.00 C.I. cover with frame of 300 mm x 300 mm 1234.57 No.

size ( inside) with standard weight. sqare

mouth trap size 150 x100 mm P trap

Providing erecting and fixing double coated

31 2000.00 ISI water tank of required capacity each with 3.91 Litre

all necessary fittings and connection etc.

complete on terrace

Extra rate over item of excavation of earth for

excavation of asphalt pavement/RCC of

thickness up to 0.20 meter including

32 20.00 demolishing the asphalt carpet, metal, soiling 71.43 Sq.M.

/ cutting Reinforcement etc.comp. with

stacking the material as directed.-up to

meter thickness

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 100 mm diameter with jali of

33 42.00 the following nominal diameter of self 565.43 No.

cleansing design with C.I scread down or

hinged grating including the cost of cutting

and making good the walls.

Provdg. And fixing Concealed / Open to wall,

ceiling & floor in true line and level UPVC pipe

Schedule- 40 of make as approved by engg.

incharge. pipe shall be fix on wall with the

34a help of clamp at every twi meter center to

center of shall be concealed as directed in

cluding neccesarry fitting etc. in cluding

testing of pipe and jointd and fixing the same

with adhesive solvent , including cost of all

materials of following nominal bore

iii 30.00 32 mm 117.97 Rmt

Providing and fixing concealed center point to

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

34b seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete

iii 35.00 25 mm 247.25 Rmt

Provdg. And fixing to wall ,ceiling and floor

10.00 kg. F/Sq.Cm2 working pressure

35 polythelene pipes of the following outside

diameter, low, density, complete with special

flange compression type fittings, wall clips etc.

making good wall ceiling and floor.

b 70.00 (A) 75mm dia 274.68 Rmt

Providing and fixing water closet squatting

36 9.00 Pan ( Indian type W.C. Pan) size 580mm 1351.49 No.

(A)VitreousChina. (I)Long pattern = White

colour with Trap and Pair of Foot Rest

Providing and fixing white vitreous china

extended wall mounting water closet of Cera

Make S1043101 Carat Model Or Equivalent

Model With EWC Soft Close Seat Cover,

Chair Bracket, nuts, bolts and gasket etc

Providing and Fixing of C.P. Brass Flush

Cock of 25 mm Dia of Jaquar make model

no. 081 or equivalent and Outer Body of

b 29.00 Jaquar make model no. 5083KPM or 2732.58 No.

equivalent approved make with all necessary

fittings. as approved by Engineer - in -

Providing and fixing Health Faucet of Jaquar

c 20.00 make model no. 573 oe equivalent make as 1543.36 No.

approved by engg. In charge with flexible tube

upto 1 metre long etc. complete.

Providing and fixing 24"x18"x8" Carysil

Elegance or Equivalent Make of Single Bowl

38a 4.00 Sink S.S. Matt Finish With Waste Coupling, 7960.49 No.

Waste Pipe,etc. cutting and making good the

walls wherever required.

Providing and fixing Under counter Wash

basine including 15 mm C.P. Brass Pillar tap,

32 mm C.P. Brass Waste of Standard make,

b 4.00 Cutting & Making good the wall / granite 6641.14 No.

Wherever Required in White Color : Model

S2030101 of Cera Clair Series or Equivalent

make Wash basine of size : 520x450 mm

Providing and fixing Wall Hung wash basin

Including 32 mm C.P. brass waste of standard

c 16.00 pattern, cutting and making good the walls / 3825.20 No.

granite wherever require:In White Color : Cera

Cadal Or Equivalent Make Wash basin of size

Provdg. & fixing 600mm x 450 mm Bevelled

edge mirror of superior glass mounted of .6

39a 16.00 mm th. A.C. sheet or plywood sheet and fixed 825.48 No.

to wooden pluge with C.P. brass screws and

Providing and fixing mirror of superior glass

(of approved quality) and of required shape

and size with plastic moulded frame of

approved make and shade with 6 mm thick

hard board backing : Rectangular shape

Provdg. & fixing C.P..Brass towal rail

complete with C.P. brass brackets fixed to

wooden plugs with C.P. Brass screws.(600

mmx 20 mm size)

Providing and fixing ball valve (brass) of

41 approved quality, High or low pressure, with

plastic floats complete :

ii 1.00 20 mm dia 1099.94 No.

iii 25.00 25 mm dia 1552.93 No.

iv 12.00 40 mm dia 3312.60 No.

42a Providing and fixing Full Way valve (HEX)

with wheel of approved quality :

i 2.00 15 mm Full Way valve (HEX) 1461.17 No.

ii 2.00 20 mm Full Way valve (HEX) 1924.61 No.

iii 8.00 25 mm Full Way valve (HEX) 2535.55 No.

iv 1.00 32 mm Full Way valve (HEX) 3377.64 No.

v 8.00 40 mm Full Way valve (HEX) 4661.10 No.

vi 3.00 50 mm Full Way valve (HEX) 6675.14 No.

Providing and Fixing of C.P.Brass Pillar Cock

of 15 mm Dia of approved make with all

necessary fittings. as approved by Engineer -

b 4.00 Providing fixing of SS grab bar with all 1937.24 No.

hardwares for Physically Handicap toilet.

Providing and laying integral cement based

water proofing treatment including preparation

44a 690.00 of surface as required for treatment of roofs, 1150.48 Sq.M.

balconies, terraces etc consisting of following

(a) Applying a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with

water proofing compound conforming to IS.

2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls

upto 300 mm height including cleaning the

surface before treatment.

(b) Laying brick bats with mortar using broken

bricks/brick bats 25 mm to 115 mm size with

50% of cement mortar 1:5 (1 cement :

coarse sand) admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineer-in-charge over 20 mm

thick layer of cement mortar of mix 1:5 (1

cement :5 coarse sand ) admixed with water

proofing compound conforming to IS :

and approved by Engineer-in-charge to

required slope and treating similarly the

adjoining walls upto 300 mm height including

rounding of junctions of walls and slabs.

(c) After two days of proper curing applying a

second coat of cement slurry using 2.75 kg/

sqm of cement admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick

jointless cement mortar of mix 1:4 (1 cement

:4 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineerin- charge

(e) The whole terrace so finished shall be

flooded with water for a minimum period of

two weeks for curing and for final test.“All

above operations to be done in order and as

directed and specified by the Engineer-in-

Charge :and shall be guaranteed for minimum

period of 10 years after handing over the

completed building by the main contractor to

be finished as directed. Stamp paper

guarantee 10 years to be furnished before

receiving any payment from the client.

With average thickness of 120 mm and

minimum thickness at khurra as 65 mm.

Providing and laying broken chine mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto

surface using white cement including

rounding off junctions and extending them

upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

Providing and applying fibre reinforced

elastomeric liquid water proofing membrane

with resilient acrylic polymers having Sun

Reflectivity Index (SRI) of 105 on top of

concrete roof in three coats @10.76 litre/

sqm. One coat of self-priming of elastomeric

c 360.00 waterproofing liquid (dilution with water in the 562.40 Sq. M.

ratio of 3:1) and two coats of undiluted

elastomeric waterproofing liquid (dry film

thickness of complete application/system not

less than 500 microns). The operation shall

be carried out after scrapping and properly

cleaning the surface to remove loose particles

with wire brushes, complete in all respect as

per the direction of Engineer-in-Charge.

Filling in Sunken Portion with good Quality

Aerated light weight concrete block having

crushing strength not less than 35 kg/sqcm

and where directed by the Architect /

Engineer-in-charge, in sunk in layer. including

watering, ramming where it is required etc.

complete, as directed by the Architect /

Engineer-in-charge .

Providing and laying cement concrete flooring

( I.P.S.) 1:2:4 (1-cement : 2-coarse sand : 4-

45 200.00 graded stone aggregate 20mm nominal size) 348.08 Sq.M.

laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

Providing and fixing M.S. grills/ Gate of

required pattern to wooden/ Granite frames of

windows etc. with M.S. flats at required

46a 5500.00 spacings and frame alround, square or round 100.17 Kg.

bars with round headed bolts and nuts or by

screws all complete as per the structural

designs and directions of Engineer in charge

Providing & Fixing Structural steel work (

Confirming to IS 4923-1997) riveted, bolted or

welded in builtup for all type sections, in

framed work, including cutting, hoisting, fixing

in position and applying a priming coat of

approved steel primer all complete as per the

structural designs and directions of Engineer

Applying priming coat over new steel and

other metel surface after and including

preparing the surface by throughly cleaning,

c 700.00 oil, grease, dirt and other foreign matter and 34.34 Sqmt

scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed

priming paint brushing red lead.

Painting two coats (excluding priming coat) on

new steel and other metal surface with

d 700.00 enamel paint, brushing, interior to give an 86.94 Sqmt

even shade including cleaning the surface an

even shade including cleaning the surface of

all dirt, dust and other foreign matter.

Providing & Fixing 1 mm Thick S.S.-304

Grade 90 mm High S.S. Railing having Hand

Rail Member of 50 mm Dia., 3 No. of

Horizontal Pipe of 16 mm Dia. & Baluster

Suppprt of 40 mm Dia. At Every Third Step as

per Detail Given. Rate Includes All Work

Complete as per Description & as per

Direction of Engg. in Charge.

Providing and fixing in position collapsible

steel shutters with vertical channels 20x10x2

mm braced with flat iron diagonals 20x5 mm

47a 72.00 size with top & bottom rails of T-iron 40x40x6 5391.23 Sq. M.

mm with 38 mm dia. Steel pulleys complete

with bolts , nuts , locking arrangement

stoppers , handles including applying a

priming coat of red lead paint.

Providing corrugated 0.80 mm (22 gauge)

thick G.I. sheets roofing fixed with galvanized

b 5.00 iron ‘J’ or ‘L’ hook bolts, and nuts 8 mm. dia 719.93 Sq.M.

with bitumen and G.I. limpet washers filled

with white lead complete excluding the cost of

purlines, rafters and trusses.

Providing valleys 900 mm. overall in plain

c 3.00 mm. thick G.I. sheet Class – 3 fixed with ‘J’ or 1042.78 Sq.mt.

‘L’ hook bolts and nuts galvanized from ‘J’ or

‘L’ hook bolts and bitumen washers complete.

Providing and fixing rolling shutters of

approved make made of 80 mm wide M.S.

laths inter-locked together through their entire

length and jointed together at the ends by end

48a 18.00 locks mounted on specially designed pipe 3468.72 Sq.M.

shaft with bracket plates, guide channels and

arragements for inside and outside locking

with push-pull operation including the cost of

hood cover and spring etc. complete.(A)

Shutters having width below 3.5 M.

Providing and fixing 27mm domal Series -

mm Th. Alluminium Section Three track

49a 280.00 Sliding window With Metalic Powder Coating 6373.85 Sq. M.

and 4 MM Clear Glaas(Non Tuffen) Include

All Accessaries and Fixture etc. complete as

per the direction of Engineer-in-charge.

Providing and fixing 27mm domal Series -

mm Th. Alluminium Section Two track Sliding

b 14.00 window With Metalic Powder Coating and 4 4999.10 Sq. M.

MM Clear Glaas(Non Tuffen) Include All

Accessaries and Fixture etc. complete as per

the direction of Engineer-in-charge.

ALUMINIUM DOOR WORK

Providing and fixing Aluminium Door work

(Single Shutter OR Double Shutter with fix

glass) made from Jindal or equivalent make

Powder Coated (50 micron pure polyester

coating ) ,aluminium section frame built up

standard tubular and other section of

approved make confirming to IS 733 and IS

1285 , member size with shutters of horizontal

member , vertical member Confirming to

IS733 and IS 1285 fixed with rawl plug abd

screws or fixing clips or with expansion hold

fasteners including necessary filling up of

gaps at junctions at top bottom and sides with

c 11.00 required PVC/ Neoprene felt, 8/12 mm 5401.70 Sq. M.

toughened glass of approved make etc.

Aluminum sections shall be smooth, rust free,

straight.mitred and jointed mechanically

wherever required including Door Hardware

such as cleat angles aluminum snap beading

for glazing /paneling, CP Brass/ Stainless

steel screws, Stoppers, heavy duty floor hing,

S.S. Hinges, aldrop , Locking system, heavy

duty Floor Springs, Pivot and fixtures and

transparent silicon sealant glass fixing to

frame as per details all complete as per

architectural drawings and the direction of

Engineer in Charge. rate incl. all type of

alumnium sections for doors as per the detail

Architectural dwg.

Providing and fixing standared extruded of

alluminium section of size 63 mm x 38.10 mm

50 a 15.00 x 1.2mm (Section:2434, @ Wt.0.643Kg/mt ) 1163.92 Sq. M.

with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x

1.95 mm ( Section no: 4605, @Wt 1.094 Kg /

50 b 20.00 Rmt with colour anodized alluminium frame 1509.90 Sq. M.

with 5 mm thick transparent bronze colour

tinted float glass as details etc complete for

Providing Fixing 1.2 mm thick Alluminium

Section Partition -Fully Glazed / Partly

Panelled Partly Glazed / Fully Panelled

Having Size of Section of 2.1/2 x 1.1/2 with

mm Compact Sheet / 5 mm thick Glass Fixing

with 4 mm thick EPDM Rubber etc. Complete

as per Direction of Consultant /

Providing Fixing 1.2 mm thick Alluminium

Section Partition Door -Fully Glazed / Partly

Panelled Partly Glazed / Fully Panelled

frame Having Size of Section of 2 .1/2 x

.1/2 and Door Section Having Size of Tips

50d 13.00 Vertical 1 .3/4 x 1 .3/4, Top Rail 4 x 1 .3/4, 4061.77 Sq.mtr.

Middle Rail 1 .3/4 x 1 .3/4, Bottom rail 4 x

.3/4 with 4 mm Compact Sheet / 5 mm thick

Glass Fixing with 4 mm thick EPDM Rubber

Including Lock, Handle, Door Closer, Door

Stoper, Stopper etc Complete as per Direction

of Consultant / Engg.incharge.

Providing and fixing Structural Glazing with

using the 17 Micron anodised of approved

colour alluminium section as transium,

mullium of size 63mm x 38mm x 2 mm with

using 6 mm thick reflective structural glass of

approved make, colour / Tinted, toughned and

shade and fixed with silicone sealant and

spacer tap and at corner sealed neoprene

foam dust and Air sealed gasket mirred

including scaffolding, cleaning of glass

etc.complete at all heights anf lifts with all

necessary fitting and fixtures, anchore

51a 230.00 fasteners, necessary M.S. or Aluminium 3953.75 Sq.mt.

brackets, suitable design for openable or

sliding window as per Architectural drawing

and as directed by Engineer-in-charge.

Grooves between the glasses to be filled with

sealant of Dow corning - structural sealant

995, weather sealant 789. The entire facade

should be water proof. The mullions are to be

connected to bracket by SS-304 nut bolts.

Measurement shall be given as per actual

execution of the work. (Rate are included

providing & fixing of MS structure steel work

wherever Required)

Design supply & installation of suspended

Spider Glazing system designed to withstand

the wind pressure as per IS 875 (Part-III). The

Suspended System held with Spider Fittings

of SS-316 Grade Steel of approved

manufacturer with glass panel having 12 mm

thick clear toughened glass held together with

SS- 316 Grade Stainless steel Spider & bolt

assembly with laminated glass fins 21 mm

thick. The Glass fins and glass panel

assembly shall be connected to Slab/ beams

by means of SS- 316 Grade stainless steel

brackets & Anchor bolts and at the bottom

using SS channel of 50x25x2mm using

fastener & anchor bolts, non staining weather

sealants of approved make, Teflon/ nylon

bushes and separators to prevent bi-metallic

contacts, all complete to perform as per

specification and approved drawings. The

complete system to be designed to

accommodate thermal expansion & seismic

movements etc. The joints between glass

panels (6 to 8 mm) and gaps at the perimeter

& in U channel of the assembly to be filled

with non staining weather sealant, so as to

make the entire system fully water proof &

The rate shall include all design, Engineering

and shop drawing including approval from

structural designer, labour, T&P, scaffolding,

other incidental charges including wastage,

enabling temporary services all fitting fixers

nut bolts, washer, Buffer plates, fastener,

anchors, SS channel laminated glass etc. all

complete. For the purpose of payment, actual

elevation area of Glazing including thickness

of joints and the portion of Glass panel inside

the SS channel shall be measured.

Providing and fixing 12 mm thick Toughened

Glass Door with / Without Fix Portion

Including Floor Spring , Lock, 300 mm Long

Door Handle, Nut Bolt, Clamp, Connector and

All accessaries as approved by Engg.

Providing and fixing ISI marked 35 mm thick

flush door shutters conforming to IS :

(Part I) decorative type, core of block board

construction with frame of 1st class hard

wood and well matched teak 3 ply veneering

with vertical grains or cross bands and face

veneers on both faces of shutters with

52a 101.00 mm thick Decorative Laminated Sheet on 4332.15 Sq.mt.

both faces of shutters including ISI marked

Stainless Steel butt hinges, bright /matt

finished 125 mm Stainless Steel handles of

approved quality & make, ISI marked

oxidised M.S. door latches / Aldrop

Conforming to IS:5930 with necessary screws

etc. complete as per direction of Engg.

Providing wood work in frames of Doors,

windows cleare story windows and

othersimilar works wrought, framede and fixed Cu.Decim

in position. (A) Indian Teak Wood

Providing and fixing 35 mm th. Shutters for

doors windows & clearstory windows incl.

wood frames as specified 12 cm. x 7cm. size

53 incl. anodised alluminium fixtures and

fastenings including primer coat of approved

quality and two coats of oil paint etc.

a 3.00 Fully glazed 4788.50 Sq. M.

b 3.00 Fully panelled 5478.89 Sq. M.

c 3.00 Partly panelled and partly glazed 5133.69 Sq. M.

Providing and fixing FRP frame size 100x50

mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected

fire retardant grade polyurethene foam done

54 32.00 in situ alongwith embedded wooden pieces 2354.22 Sq.M.

for stiffening & also taking hinges & fintures.

The whole FRP frame & shutter is to be water

proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws

& alluminium fixtures & fastenings & fastener

Making connection to the ex.M.H.in running

sewer incl. Dewatering and other required

machinery etc. of following dia pipes at any

convenient time. All damaged work shall be

well repaired as per instructions.

a 1.00 For Pipe 150 mm to 300 mm diameter 1339.29 No.

b 1.00 For Pipe 400 mm to 600 mm diameter 2232.14 No.

Making connection of galvanised Mild steel

distribution branch with galvanised mild steel

56 1.00 main 50mm to 80mm nominal bore by 600.08 No.

providing and fixing tee including cutting and

threading the pipes complete

57a 1500.00 Providing throating or plaster drip, grooves 41.25 Rmt

and moulding to Wall , R.C.C. chajja and slab.

Providing & Laying cement vatta 10 cm x

cm in size quarter round in c.m. 1:1 (

57b 200.00 cement, 1 coarse sand) laid in one layers 23.45 Rmt

finishing with a floating of neat cement

watering etc complete as dire.

Carring out plinth treat ment to post

construction/ existing structure by spraying

chemical solution for termite control treatment

including labour and material consist ment

withI.S.I specification. Using Chlordene and

58 1100.00 Chiorpur files 20EC. As Per 6131_ paret- II 104.90 Sq.mt

Consentration Weight one percent is

recommended i.e one litre 20EC chemical

emulsion with19 liter give1% concrentration

inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical/ Sqm

of surface is recommended as per I.S

Carring out timber treatment to all wood work

including drilling holes and spraying oil based

chemical solution on surface of timber work

for termite control including labour and

material etc. complete. Using Chlordene

20EC. As Per 6113_part III Consentration

59 10.00 Weight 1.00 percent is recommended one litre 54.98 Smt

chemical emulsion dillute with 9 liter of

kerosene precent concentration. Total dillute

concrentration will be10litre inclusive of the

litre chemical emulsion application 0.75/Litre

chemical per one Sqmt printed two coat wood

Paver Block Providing and laying shot blasted

Non - interlocking, Paver blocks of specified

thickness, size, grade of concrete and colour

machine made and blasting by automatic shot

blasting machine and high density of as per

approved sample of approved make for

footpath, parking areas, service lanes,cross

over and other areas as mentioned in the

drawing. Including providing and laying

mm thick averave bedding layer of coarse

sand below paver block as per required

grading and specification. Laid paver block

shall be mechanically compacted. The work of

the paving blocks shall be executed in line

and level by skilled mason of flooring work

only. Small size of paver block with same

specification shall be used at residue or at

end. It should be laid in such a way that the

no cutting of the paver block to be necessary.

If cutting of paver block shall be required

than cut by machine only and laying to be

done by skilled flooring mason. The finished

surface of the paver block shall have coarse

sand Texture Finish. Pave blocks shall be

compacted and shall be re-laid if necessary.

Actual laid area shall be measured and paid

without any wastage. (A) 80 mm thick M-35

grade Grey Paver block of size 200mm x

200mm. As per approved rate

Providing and fixing pre-cast concrete kerb

stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of

61 350.00 M250 grade concret as per approved design 358.06 R.mt.

and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and fixing double action hydraulic

floor spring of approved brand and

manufacture conforming to IS : 6315, having

brand logo embossed on the body / plate with

double spring mechanism and door weight

62a 16.00 upto 125 kg, for doors, including cost of 4558.89 No.

cutting floors, embedding in floors as required

and making good the same matching to the

existing floor finishing and cover plates with

brass pivot and single piece M.S. sheet outer

box with slide plate etc. complete as per the

direction of Engineer-in-charge. With stainless

steel cover plate minimum 1.25 mm thickness

Providing and fixing aluminium extruded

section body tubular type universal hydraulic

door closer (having brand logo with ISi, IS :

3564, embossed on the body, door weight

upto 36 kg to 80 kg and door width from

mm to 1200 mm), with double speed

adjustment with necessary accessories and

screws etc. complete.

Designing, fabricating, testing, installing and

fixing in position Curtain Wall with Aluminium

63 125.00 Composite Panel Cladding, with open 3061.95 Sq.mt.

grooves for linear as well as curvilinear

portions of the building , for all heights and all

levels etc. including:

(a) Structural analysis & design and

preparation of shop drawings for pressure

equalisation or rain screen principle as

required, proper drainage of water to make it

watertight including checking of all the

structural and functional design.

(b) Providing, fabricating and supplying and

fixing panels of aluminium composite panel

cladding in pan shape in metalic colour of

approved shades made out of 4mm thick

aluminium composite panel material

consisting of 3mm thick FR grade mineral

core sandwiched between two Aluminium

sheets (each 0.5mm thick). The aluminium

composite panel cladding sheet shall be coil

coated, with Kynar 500 based PVDF /

Lumiflon based fluoropolymer resin coating of

approved colour andshade on face # 1 and

polymer (Service) coating on face # 2 as

specified using stainless steel screws, nuts,

bolts, washers, cleats, weather silicone

sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy

6005 T5 / MS with Hot Dip Galvanised with

serrations and serrated washers to arrest the

wind load movement, fasteners, SS 316 Pins

and anchor bolts of approved make in SS

316, Nylon separators to prevent bi-metallic

contacts all complete required to perform as

per specification and drawing The item

includes cost of all material & labour

component, the cost of all mock ups at site,

cost of all samples of the individual

components for testing in an approved

laboratory, field tests on the assembled

working curtain wall with aluminium composite

panel cladding, cleaning and protection of the

curtain wall with aluminium composite panel

cladding till the handing over of the building

for occupation. Base frame work cost for ACP

cladding is included in this item rate. The

Contractor shall provide curtain wall with

aluminium composite panel cladding, having

all the performance characteristics all

complete , as per the Architectural drawings,

as per item description, as specified, as per

the approved shop drawings and as directed

by the Engineer-in-Charge. However, for the

purpose of payment, only the actual area on

the external face of the curtain wall with

Aluminum Composite Panel Cladding

(including width of groove) shall be measured

in sqm. up to two decimal places.

Providing and Fixing Box type metal letters

forming composite box made from 1mm thick

stainless steel plate of grade 304 having

64 brush finish of following font size to be fixed at

Main Gate in english and or Gujrati and

including fixing charges. etc. complete as per

direction of Engg. incharge. for Payment

Purpose Height of Letter will be measured.

a 960.00 Upto 300 mm Height 93.85 R. Inch

Providing and Fixing MURAL made out of

2mm thick s.s. plate grade 304, including

making necessary design as per Architect

dwg. Through laser cutting including

connection to the R.C.C./Masonary with

necessary frame,anchor fastnuts,M.S.Plate

etc. complete as per direction of Engg.

Providing and Fixing Sinage - internal and

65b 7000.00 external signage boards with Vinyle Text on 9.38 Sq.Inch

ACP sheet / 2 mm th. S.S. Plate etc. complete

as per direction of Engg. incharge.

Providing and fixing retro Reflective Hi

Intensity Micro Prismatic Grade Board using

2mm Aluminum / 4mm ACP, angle iron 75 x

75 x 6mm. Descaling and degreasing the

board as per requirement using epoxy

reflactive process by screen painting as

directed etc. complete including transporting

65c 8.00 and fixing in C.C. 1:2:4 with necessary 7535.31 Sq.mtr.

excavation curing etc. complete as per I.R.C.

67-2012 design. A warranty for 7 years for the

Retro reflective sheeting from original

manufacturer & a certified copy of 3 year

outdoor exposure test report from third party

test lab for the product offered shall be

submitted by contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

Road marking with hot applied thermoplastic

paints with reflectorising glass beads on

bitumin surface providing and laying a hot

applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @

250gms per sqm area, thickness of 2.5mm is

excluding of surface applied glass beds as

per IRC:35-2015. The finished surface to be

level, uniform and free from streaks and

holes. zebra patta /bump patta lane/center

65d 100.00 line/ edge line/cut patta. The white color 364.08 Sqmt

marking should provide liminance coefficinet

on cemend road shalll be min 130 mcd/m2/lux

and Asphalt road shall be min

mcd/m2/lux during the service life during the

day time. The marking should meet the

performance criteria for night time reflectivity,

wet reflectivity and skid resistance as

mentioned in the section-15 of IRC

Warranty for the Retro reflectivity should be

CAT EYE/Pavement Marker(MNC two nail)

made out of acrylic StreneAcrylonitrile or hi-

impact poly Steren fitted with moulded of

metheacrylate(MNC)reflector cube corner

reflector design,filled with tightly adhering

65e 10.00 pooting compound as per ASTMD-788 size 160.71 Nos.

11.5x7x1.60 cms or 10x10x1.75 cms provided

with bituminous adhesive in sufficient quantity

with each unit fixing with two shrank .Reflector

on both side.Co efficient of lumination as per

specification and compressive strenth

tones at 23 degree centigrade etc.B) Double

Providing and fixing eco-friendly light weight

calcium silicate false ceiling tiles having T

egular edge & 15mm Thick Densified edges

on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall

have, light reflection 85% non-combustible as

per B.S.476 part IV, 100% humidity resistance

and also having thermal conductivity 0.043°

w/m KC. for the best thermal Insulation.

The Light weight calcium Silicate tile shall be

of approved texture Fine fissured/ Spintone/

Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent

of size 595X595 mm to be laid on true

horizontal level suspended inter locking metal

grid of hot dipped galvanized steel sections

(galvanizing @ 120 grams per sqm including

bothside) consisting of main ‘T’ runner

suitably spaced at joints to get required length

and size of 24X38 mm made from 0.30 mm

thick (minimum) sheet, 1200 mm centre to

centre, and cross ‘T’ of size 24X28 mm made

out of 0.33 mm (Minimum) sheet spaced

mm along spaced between main ‘T’ at

mm centre to centre to form a grid of

1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of

0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm resting

on periphery walls / partitions on a perimeter

wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick

sheet with the help of rawl plugs at 450mm

centre to centre with 25mm long dry wall

screws @ 230mm interval and laying 15mm

thick Densified edges light weight calcium

silicate ceiling tiles of approved texture (Fine

Fissured/ Cosmos/Spintone) in the grid

including, cutting /making opening for services

like diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required,

Main ‘T’ runners to be suspended from ceiling

using G.I. slotted cleats of size 25X35X1.6mm

fixed to ceiling with 12.5mm dia and 50mm

long dash fasteners, 4mm G.I. adjustable rods

with galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm centre to

centre long main ‘T’ bottom exposed with

24mm of all T-sections shall be pre-painted

with polyester baked paint, for all heights,

, as per specifications, drawings and as

directed by engineer-incharge.Note:- Only

calcium silicate false ceiling area will be

measured from wall to wall. No deduction

shall be made for exposed frames/ opening

(cut outs) having area less than 0.30 sqm.

The calcium silicate ceiling tiles shall have

NRC. Value of 0.50 (Minimum) for Fine

fissured/ Spintone/ Cosmos and 0.75 NRC for

Globe, light reflection 85% noncombustible as

per B.S. 476 part IV, 100% humidity

resistance and also having thermal

conductivity. 0.043° w/m KC.for the best

thermal Insulation

Providing and fixing single layer water proof

gypusm board 12.5 mm thick of the make

New good Group Co.Ltd. or equivalent & New

good Group Co.Ltd. company sections using

water proof board of size 1220 mm x

mm x 8.0 mm suspended by G.I suspender of

size 25 mm x 3 mm with intermediate channel

66b 805.00 of size 18mm x40mm x0.80mm at 1220 mm 600.94 Sq.mt.

center to center ceiling section of size 40mmx

35mmx 0.55mm at 457 mm center to center

and perimetre chanel A of size 20mm x 27mm

x 30mm x 0.50mm at edges & drops including

paper taps and sofit cleat, anchor fastener,

scoch bolt connecting cleat joining compound

top coat on ceiling including making

necessary opening for light fitting, diffuser etc.

complete as per detail drawing as directed.

Providing and Fixing 6 mm thick Lexan

Polycarbonate multi wall roofing sheet fixed

67 10.00 with hilti screw and rubber silicon sealer and 1427.62 sq.mt.

alluminium strip of size 50 x 3 mm etc

complete as directed by Engineer in charge

Manufacturing,testing ,supplying

loading,,transporting to work site,loading

unloading lowering in trenches,laying and

68 jointing RCC NP3 class pipes in C:M 1:1

including all jointing materials such as

cement,sand,hemp bitumen as directed

testing the pipe line to a head of 1.5 mt and

hydraulic test as directed etc comp.

a 50.00 300 mm Diameter 616.07 Rmt

b 190.00 450 mm Diameter 806.25 Rmt

Constructing Bombay Pattern Type Catch Pit

x 0.60 depth up to 1 mt including excavation,

(1:5:10), 23 cms thick brick maso. wall in the

69 25.00 prop. of CM 3125.00 No

(1:6) with 40 mm thick IPS flooring in the prop

bottom and 15 mm thick cement plaster inside

the catch pit in the proportion of CM (1:3) with

out jali etc. comp. as

CatchPit Jali Fixing P/F FRC catch pit jali with

70 25.00 frame 600mm x 600mm clear opening etc. 1383.93 No

comp.. As directed by engineer in charge.

PERCOLATION WELL

71 120.00 Drilling of pilot bore hole in Alluvial Strata by 694.64 Rmt

direct Rotary Rig of 250 mm.

72 120.00 Reaming 400 mm 212.50 Rmt

73 1.00 Electro Logging charges with carting 16071.43 Job

74 60.00 Providing and Installing 200 mm dia IS:12818 1193.75 Rmt

upvc Casing Pipe "CM" class plain Pipe

75 1.00 Providing and Installing 200 mm dia IS:12818 669.64 Set

upvc End Cap, with Air Vent cowl

200 mm dia Regular with 1.5 mm sloted size

cage type trapezoidal shape wire wound little

carbon galvanized screen confirming to

77 10.00 Supply of Pea sized Gravel 2029.46 Cmt

78 1.00 Air Vent of 50 mm Bend 401.79 Unit

79 120.00 Lowering and Removing of Dropline up to 147.32 Rmt

80 1.00 Air Compressor 60 CFM/150 PSI 22205.36 Ls

Estimate For Civil Work With Percolation Total Rs.

I. No. Qty Items Unit Rate Per Amount

Electrical Work Estimate

1 INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires up to

mtr length , in below type of pipe erected with

6A Modular type switch / bell push &

1.1 accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

330.00 accessories erected concealed in wall/ceiling 505.05 Pt

Point wiring for FAN with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade ZHFR/HRFR PVC

insulated multi strand copper wires up to

mtr length, in below type of pipe erected with

6A Modular type switch and hum free EME

four or more step type electronic fan regulator

1.2 with separately mounted and accessories

with earth continuity of following type erected

on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

245.00 accessories erected concealed in wall/ceiling 701.40 Pt

Point wiring for secondary light point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand

copper wires, in below type of pipe to be

erected complete with earth continuity and

1.3 necessary connection with primary light with

accessories erected on Metal / PVC /

wooden box covered covered with appropriate

front plate modules erected on / in wall /

ceiling for open / concealed wiring. with

necessary Lamp holder / ceiling rose /

H.D.Connector as directed.as per pipe

erected with following type of accessories.

Note:- Maximum up to 6 mtrs length, excess

will be considered as Mains for Secondary

(f) with medium class Rigid PVC pipe and

305.00 accessories erected concealed in wall/ceiling 174.30 Pt

Point wiring for Individual Plug with & earth

wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires up to

1.4 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe

erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5

1.4.1 120.00 sq.mm Cu. Wire from nearby 530.25 Pt

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

1.4.2 50.00 [II] For 16A Plug and 16 amp switch with 2- 774.90 Pt

2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

[III] For 16A Plug and 16 amp switch with 2-4

1.4.3 20.00 sq.mm Cu. Wire with 2.5 sq.mm ( green) 906.15 Pt

earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting

1.5 150.00 base frame covered with textured / 255.00 Pt

metallic/white front plate modules erected on

/ in wall / ceiling with following type

Point wiring for Two Way Controlled Light

Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked 1.1 KV

grade ZHFR/HRFR PVC insulated multi

strand copper wires erected in below type of

pipe with 6A Modular type switches and

1.6 following type of accessories erected on PVC

/ Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

8.00 accessories erected concealed in wall/ceiling 627.90 Pt

Providing following type of Modular Type

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

1.7 frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

1.7.2 5.00 (2) One No 5 pin plug 150.00 E.a.

1.7.3 80.00 (7) Blank Plate Single 25.00 E.a.

1.7.4 1.00 (8) Computer RJ-45 socket 159.00 E.a.

1.7.5 50.00 (9) 16 Amp. SP one way switch 179.00 E.a.

1.7.6 50.00 (10) 6/16Amp. Universal socket 198.00 E.a.

Modular MCB Switch

Pole Modular MCB Switch

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete

to be erected on/in wall or ceiling erected

1.8 with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as

Providing & erecting PVC Corrugated Flexible

1.9 Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

providing and erecting Mains with ISI marked

electrolyte stranded copper conductor, Non

PVC Zero Halogen free fire retardant

insulated copper conductor, insulated wire

(HRFR) conforms to IS-694, erected in

existing pipe with 1.5sq. mm copper

conductor of same specifications for earth

continuity of following size.

In Existing medium class Rigid PVC pipe and

providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

1.11 type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for

earth continuity of following size

(A) with medium class Rigid PVC pipe and

(use earth wire of 4 sq.mm )

providing and erecting Mains with ISI marked,

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

1.12 erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and

bolts if required.

1.12.1 10.00 (e) One wire 6.00 sq. mm 56.00 Mtr

1.12.2 10.00 (f) One wire 10.00 sq. mm 91.00 Mtr

1.12.3 15.00 (g) One wire 16.00 sq. mm 141.00 Mtr

1.12.4 10.00 (h) One wire 25.00 sq. mm 234.00 Mtr

1.12.5 20.00 (i) One wire 35.00 sq. mm 298.00 Mtr

1.12.6 40.00 (k) One wire 70.00 sq. mm 663.00 Mtr

Supplying and erecting Flexible PVC

1.13 insulated multi strand multi core 1.1 kv grade

ISI marked copper wires of following size to

be erected as directed.

1.13.1 140.00 e) 1.50 Sq.mm 3 core round PVC sheathed 46.00 Mtr

1.13.2 80.00 h) 2.50 Sq.mm 3 core round PVC sheathed 77.00 Mtr

1.13.3 30.00 k) 4.00Sq.mm 4 core round PVC sheathed 175.00 Mtr

Supplying & erecting M.S. Box having

Gauge painted with red oxide or Heavy duty

1.14 PVC box erected flushed on wall or concealed

in wall with necessary plastering & finishing

as directed of following size.

Supplying and laying UPVC cable trunking

system comprising unplasticised polyvinyl,

chloride rigid material with ignition free and

1.15 flame proof confirming BS with necessary end

caps Internal and external bend, flat bends,

coupler, tee etc..All necessary accessories

and measuring of following sizes

1.15.1 5.00 (2) 100 mm x 50 mm trunking 424.00 Mtr

1.15.2 5.00 (4)100 mm x 50 mm trunking with TWIN 1309.00 Mtr

compartment With clip in divider

Supply & installation of surface mounted U

PVC snap-on adaptable trunking raceways,

fabricated out of U-PVC to Off-White or

approved shade as per IS 733 of thickness

2.0mm for the base and sides with all

accessories like removable covers, joints

,height spacer,angles complete with

necessary bends, suitable sized junction

boxes and tees etc, Complete.

(a)Size: 50x80mm PVC Raceways for Power

5.00 & Data with 2 compartments above 1052.00 Mtr

specifications.

Supply & installation of modular type

accessories for U PVC snap-on adaptable

1.17 trunking/Pop up Box with required items

erected with necessary connection. As

desired by Engineer In charge

1.17.1 1.00 i) 6 A SP 1 Way Switch 204.00 No

1.17.2 1.00 ii) 16A SP 1 Way Switch 351.00 No

1.17.3 1.00 iv) 6A universal socket shuttered 347.00 No

1.17.4 1.00 iv) 6/16 A universal socket shuttered 458.00 No

1.17.5 1.00 vi) Cat-6 LAN Socket 561.00 No

SUB - TOTAL OF INTERNAL WIRING

2 Switchgears , Panels , MCBDBs & MCBs

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to

2.1 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.

6.00 ICS=100% of ICU only 6112.00 No

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 50 K.A. and above

at 415 V having normal current rating up to

2.2 630A. with variable thermal & magnetic

release suitable to work on A.C.supply 50 c/s.

with all internal connections, spreader tinned

copper & complete erected in existing

1.00 ICS=100% of ICU only 27895.00 No

providing and erecting Approved make Earth

fault Relay suitable to mount with inter

connection suitable to following size of

2.3 moulded case circuit breaker having CT ratio

& MCCB rating as following along with shunt

trip 220V AC. with all internal connections &

complete erected in existing M.S.housing..

Fabricating the box type items made from

M.S. Sheet with A.I. supports, wings, doors,

handles other hardware materials as per

2.4 25.00 requirement design with finishing by three 179.00 Kg

tank powder coating processed inside and

outside painted, erected as directed including

minor civil work. to install above MCCB.

Design, fabrication, assembling, supply,

installation, testing and commissioning of

cubicle type, wall / Floor mounted LT panel

suitable for 415 V 3 phase, 4 wire 50 Hz AC

supply system fabricated in compartmentised

design from CRCA sheet steel of 2 mm thick

for frame work ,Doors and partitions IP 42 and

covers,3 mm thick for gland plates i/c cleaning

and finishing complete 9 tank process in

house facility for powder coating in approved

shade, extendable type FP aluminium alloy

busbars of high condectivity, DMC/SMC

busbar supports, entire panel shall have a

common copper earthbar of size 25mm X

mm / 50 x 6 Al at the rear with 2 Nos. earth

studs, solid connection from main busbar to

switchgears with require size of aluminium

busbar & control wiring with 1.5 sqmm FRLS

insulated copper conductor cable, cable

alleys, cable gland plates i/c accessrories as

per specification and providing switchgears,

metering instruments etc. for following

panel.G.A.Drawing to be approved by EIC or

consultant. ( Outgoing connectors must be

nut-bolt type. Outgoing mains for 63Amp

MCBs must be of 4 x 16sqmm cu flexible

wires).Incomers Mains for MCBs shall be

always from the busbars.

( a ) Providing cable clamps / supports within

distribution boards cable alley.

( b ) All hinged door shall be earthed through

2.5 sq mm tinned b raided copper wire.

( c ) Pad locking of MCCB’s handles in “OFF”

( d ) All the C.T.s should be auto short link

( e ) All the MCCB's should be with rotary

( f ) All incoming and outgoing air circuit

breakers shall be placed on middle portion of

the vertical in single tier formation.

( g ) Any descripancy found in SLD & Boq , it

should be brought in the notice of the client /

consultant, and the decision will be taken final

by Client / consultant.

2.5.1 1.00 MAIN L.T.PANEL 461059.00 No

Main LT PANEL (As described above &

consisting of following items) AS PER SLD.

(i) 1 no of 500 Amp,50KA FP MCCB,50KA

With Adjustable μP Release for O/C,S/C,E/F

with 240V under voltage release, LED Type

Indicating Lamp (R-Y-B-ON-OFF)

(iii) Digital type 3 phase Multi function Meter

CL-1 with RS-485 PORT, CT 500/5A CL-0.5

,15VA, 2A SPMCB-7nos.,Neutral link.., CT for

APFC Relay in Y-Phase

600 Amps, 415 V, FP Aluminium Busbars

with Heat shrinkable color code insulation

sleeves.( 1 sqmm = 0.8Amp )

( a ) 1 no.250A FP,36 KA,415V FP MCCB

TM Based with O/L,S/C protection with MFM

having suitable rating of CTs, spreader

link,Rotary handle,Aux. contact,Shunt release

240V AC,2A SP MCB, Neutral link --R-Y-B

indicating lamps.

(b ) 1 no.200A FP,36 KA,415V FP MCCB TM

Based with O/L,S/C protection with KWH

Meter 200/5A CL-0.5, 15VA CTs, spreader

link,Rotary handle,Aux. contact,Shunt release

240V AC,2A SP MCB, Neutral link --R-Y-B

indicating lamps.

(c ) 1 no125A TP,25 KA,415V TP MCCB TM

Based with O/L,S/C,E/F protection with MFM

,125/5A CTS,CL-0.5 10VA, spreader

link,Rotary handle,Aux. contact,Shunt release

240V AC,2A SP MCB, Neutral link --R-Y-B

indicating lamps.

( d ) 5 no 80A FP,25 KA,415V FP MCCB TM

Based with O/L,S/C protection with Volt meter

and Ameter with selector switch ,60/5A

CTS,CL-0.5 15VA, spreader link,Rotary

handle,Aux. contact,Shunt release 240V

AC,2A SP MCB, Neutral link --R-Y-B

indicating lamps.

( f ) 3 Nos. 63A FP MCB,10KA

( g ) 3 Nos. 40A FP MCB,10KA

( h ) 2 Nos. 40A DP MCB,10KA

( i ) 2 No. 25A DPMCB, 10KA

2.5.2 1.00 CAFTERIA PANEL 110123.00 No

(i ) 1 no.200A FP,35 KA,415V FP MCCB TM

Based with O/L,S/C ,E/F protection, with

spreader link,Rotary handle,Aux.

contact,Shunt release 240V AC,2A SP MCB,

Neutral link --R-Y-B indicating lamps.

(iii) Digital type 3 phase Multi function Meter &

KWH METER CL-0.5 with RS-485 PORT,

200 Amps, 415 V, FP ALUMINIUM Busbars

with Heat shrinkable color code insulation

sleeves.( 1 sqmm = 0.8Amp )

( i ) 4 nos. 63A FPMCB,10kA, C Curve

( ii ) 1 no. 40A FPMCB,10kA, C curve

( iii ) 40A DPMCB,10kA, C curve

Design, fabrication, assembling, supply,

installation, testing and commissioning of

cubicle type,40KVAR, Voltage Rating 415V

A.C.,3-Phase , APFC Panel Incomer Switch

of MCCB type Icu=Ics=25KA at 400/440

Volts, with OC, SC, internal earth fault

protection,Copper tinned insulated

Busbar,Cubical panel should be indoor type

with IP 43 and IK 10,Metalized polypropylene

film tye3-phase 440Volt Capacitor,De tuning

Reactor for each capacitor,Panel having Short

Circuit and Overload protection,Each step

2.5.3 1.00 Capacitor having suitable MCB with Sc, 163668.00 No

OL,Each stage having Stage Contactor

(Capacitor load rating),PF regulator master

controller having 6-stage with LCD display,

Rs 485 Communication port, Indication LED

Lamps for main incomer and ON-OFF for

each capacitor bank,MS Chanel for Floor

mounting, Cable entry as per site

situation,Cooling fans for panel having 5-

steps ( 2-3-5--5-10-15 kvar heavy duty can

type capacitors ) with suitable rating of

Incomer MCB, CT. as per approved by

engineer incharge.

Supplying & erecting approved make IP

grade Company fabricated Timer Panel of

following capacity for switch On-Off street

lights on time scheduling basis made from

16G CRCA sheet duly epoxy power painted

2.5.4 inside and outside with hinged doors and

locking arrangement consisting of suitable

size of 4 Pole MCB and 4 pole contactor (cat-

III)with analog time switch, auto manual

switch of same make and suitable input and

output Bakelite terminals and with door

earthing approved by Engineer in charge.

MCBDBs and MCBs

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

2.7 having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following

Providing & erecting 415 V MCB Four Pole

2.8 for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

Providing & erecting 415 V MCB three Pole

2.9 for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

2.1 4.00 Sheets steel powder coated enclosure 175.00 E.a.

suitable for incorporating One/Two nos. MCB.

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

be used) suitable for

2.11 (A) single phase incoming and horizontal

single phase outgoing

(b) sheet steel double door (IP-43)

2.11.1 4.00 (i)4 way ( concealed manner ) 747.60 E.a.

2.11.3 2.00 (iii)8 way ( concealed manner ) 1369.20 E.a.

2.11.5 40.00 (iv)12 way ( concealed manner ) 1773.60 E.a.

(B) three phase incoming and single phase

2.12 horizontal type outgoing Per phase isolation

(b) sheet steel double door

2.12.1 3.00 (i)4 way ( concealed manner ) 2779.20 E.a.

2.12.3 4.00 (ii)6 way ( concealed manner ) 3462.00 E.a.

2.12.5 2.00 (iii)8 way ( concealed manner ) 4054.80 E.a.

2.12.7 1.00 (iv)12 way ( concealed manner ) 4603.20 E.a.

Providing and erecting Sheet Steel powder

coated Vertical MCB distribution board

(VTPN) - flush / surface mounted double door

(IP54) fitted with insulated copper busbar,

2.13 isolated neutral link, earth bar and DIN rail,

confirming to IS 13032 and BS 5486-1986,IP-

54 suitable for 63/100 AMP TPN MCCB +

RCCB as incomer and three phase outgoing

as per following .(The DBs should be used of

same company of MCB to be used)

5.00 (A)4 way outgoing 9925.00 E.a.

Supplying & erecting Sheet Steel powder

coated Cable end termination Box to be

mounted on Top or Bottom of the MCB

Distribution Box for housing/covering Extra

wires & Cables, suitable for following size of

2.14.1 2.00 (G) Three Phase 8 Way ( concealed manner ) 819.60 E.a.

2.14.2 1.00 (G) Three Phase 8 Way 683.00 E.a.

(H) Three Phase 12 Way ( concealed manner

2.14.4 1.00 (H) Three Phase 12 Way 789.00 E.a.

providing and erecting Approved make

ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

2.15 operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all

advance feature & do not incorporate any

electronic component. for following Max.

rating erected as directed

Providing and erecting Approved make

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

2.16 operation on 3 phase and neutral 415V,50Hz.

having characteristic of quick action & tripping

with all advance feature & do not incorporate

any electronic component for following Max.

rating erected as directed.

2.00 (ii) 40Amps. FP 2611.00 E.a.

Providing and erecting metallic vitrified danger

2.17 22.00 notice board as per language suggested by 69.00 E.a.

engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

Providing & erecting Medium Voltage Danger

2.18 15.00 Notice Board sticker as per language 26.00 E.a.

suggested by engineer incharge of standard

size as per IS-2551

SUB - TOTAL OF Switchgears , Panel and

Follow IS code :3043 is the guideline for the

Providing and erecting required size HOT

3.1 250.00 deep Galvanised iron strip for earthing of H.T. 77.00 KG

, OCB/ ACB/ Transformer LT panel board,

Motors etc. using proper clamp.

Providing and erecting required size Copper

strip for earthing of H.T. OCB / ACB/

Transformer, LT panel board, Motors etc.

using copper clamp.

3.3 10.00 Providing and erecting Annealed bare Copper 787.00 KG

wire 8 to 16 SWG.

3.4 90.00 Providing and erecting HOT deep Galvanised 77.00 KG

iron strip wire 8 to 16 SWG.

Supplying & erecting earth pit of minimum

bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia

of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded

by highly conductive compound with high

3.5 charge dissipation suitable for following type

of applications with chamber and heavy duty

cover.(approved make OEM has to submit

test certificate) & having back filling

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 W/ meter testing

as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing

compound should be capable to retain

moisture for long time Necessary test report

must be submitted.

(a) For Electrical Installation up to 440V in

3.5.1 4.00 normal soil 4546.00 E.a.

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer

3.5.2 3.00 System(like Automation, SCADA) i.e 8551.00 E.a.

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Supply, installation,testing and commissioning

of Chemical Earthing with UL Certified

17.2mm Dia. X 3000mm Long 254 Micron-

Copper bonded M.S. Rod manufactured as

3.6 3.00 per IEC 62561-2 with 25Kg Bentonite powder 12230.00 No

plus " U " bolt rod clamp complete with

Lockable high performence chamber suitable

& tested for 5000T capacity with SS

Hardware.or equivalent

SUB - TOTAL OF Earthing

4 CABLES, Cable Termination and cable

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

4.1 conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

of following size of cables

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand / Solid

4.2 Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

4.3 conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

of following size of cables

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

4.4 unarmoured copper cable 1.1 KV grade to be

erected as directed of following size.

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand / Solid

4.5 Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing

trench / pipe at road crossing or floor of

following size of cables.

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

at road crossing or floor of following size of

110.00 (C) 4 core 10 Sq. mm 670.00 Mtr

Making trench in soft soil of suitable width of

4.7 325.00 90 cm deep for laying cable or locating the 55.00 Mtr

fault all over the run and back filling the same

and making the surface as normal ground.

Covering of cable with second class bricks or

cement tiles laid cover the cable crosswise &

4.8 300.00 also on both sides with covering of 7. 5 Cm. 139.00 Mtr

layer of sand above & below cable (16 bricks

( A )Making trench in Hard Murrum / Tar Road

of suitable width of 90 cm or required depth

4.9 15.00 for laying any size of cable or locating the 74.00 Mtr

fault all over the run and back filling the same

and making the surface as normal ground.

4.1 5.00 (B) If additional machinery like hammer driller 354.00 Mtr

or JCB use [Add]

Drilling the road without breaking the road

4.11 surface (Asphalt) for laying of cable for

feeding power supply by making up to

following size of holes at both ends complete.

4.11.1 5.00 (A) Up to 100 mm bore dia 488.00 Mtr

4.11.2 5.00 (B) Up to 150 mm bore dia 610.00 Mtr

Supplying following size of Light duty “A”

4.12 Class G.I . Pipe & erecting as directed by

Engineer-in-charge.

20.00 (A) 25 mm dia 171.00 Mtr

Providing & laying. R.C.C. Hume pipe for

cable to be laid 90 cm. below ground across

4.13 the road crossing or on floor with necessary

material in an approved manner and making

the ground as per original.

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

4.14 necessary connecting accessories of same

material at required depth in existing trench

for laying of cable. below ground / road

surface for enclosing cable

4.14.1 90.00 (A)50 mm outer dia 62.00 Mtr

4.14.2 360.00 (B)63mm outer dia 73.00 Mtr

4.14.3 50.00 (C))90 mm outer dia 95.00 Mtr

4.14.4 110.00 (D)120 mm outer dia. 136.00 Mtr

Providing & laying approved make ISI

marked Rigid PVC pipe having 6Kg / cm2

4.15 (Class-3) to be erected at road crossing on or

floor as directed for laying of cable. The pipes

as following size of dia & weight per 6 mtr.

4.15.1 15.00 (D) 75 mm inner Dia. (5.5 Kg/6RMT) 124.00 Mtr

4.15.2 10.00 (F) 110 mm inner Dia. (11.63 Kg/6 RMT) 234.00 Mtr

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

4.16 insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables.

Providing and, fixing heavy duty flange type

brass double compression type cable gland

4.17 with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating

tape etc for following size of cables.

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following

4.18 size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an

approved manner.

Solder less crimping type Copper lugs

conforming to IS suitable for cable of following

4.19 size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an

approved manner.

SUB - TOTAL OF Cables,Cable

Terminations & Cable Trenches

5 Light Fixtures & Fans

Supply , Installation, testing and

commissioning of pre-wired, LED fitting/post

top luminaries etc of all types, complete with

all accessories and tube etc. directly on

ceiling/ wall, including connection with 1.5 sq.

mm FRLS PVC insulated, flexible, copper

conductor, single core cable with flexible

conduits and coupler and earthing etc. as

required. Note:- The LED Light fixtures

should comply all international standards third

party ( LM 79 for complete fixture, LM 80 for

individual LED ). The Manufacturer /

Channel Partner of the Manufacturer has to

submit 4- Years unconditional free

Replacement Guarantee for complete fixture.

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with

5.1 company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,CCT

3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 %(

fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

( A ) Tube Light with integral / non integral

5.1.1a 2.00 (iii) 18-20 Watts, Surge - 2KV,IP-20, 293.00 No

conventional 4 feet

5.1.1b 95.00 (v) 36-40 Watts, Surge-2 KV, IP-20, 530.00 No

conventional 4 feet

(B) LED Panel Light with provision for Plane

5.1.2 front frame with translucent cover fixed to

housing complete.IP20. Round /Square

Recessed or Surface mounted.

5.1.2a 4.00 (a)up to 8 Watts,4" x 4", Surge-2 KV 271.00 No

5.1.2b 150.00 (iii) 12-15 watts, 6" x 6", Surge-2 KV 462.00 No

5.1.2c 75.00 (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV 607.00 No

5.1.3 (F) Spot Light 425 Lumens, Surge-2KV

5.1.4 10.00 (H) Mirror Light 9 Watts, wall mounted 309.00 No

minimum 1 feet long

Providing and erecting PVC body surface or

pendent mounting LED Bulk type 9 watt

Lighting Fitting with electronic driver. And

lumen output from luminaire 720lm , input

voltage range 90-300VAC , 50Hz cool

white(3000 to 6500k), inbuilt driver, -20degC

to +60degC working temperature, AL frame

with Beam Angle 120deg

Providing & erecting Approved make Power

Saving 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt

A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with

canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer

Supplying & erecting approved make low

5.4 28.00 noise decorative exhaust fan having size 1687.00 No

200mm with 1350 RPM with square frame

ABS body with inbuilt lowers & square frame.

Supplying & erecting approved make 230 V

50 Hz Operating Voltage low noise decorative

5.5 Roof Mounting Exhaust fan having square

frame and Slitted guard with mounting

accessories, necessary pipings and fittings.

Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up

5.6 240.00 to 50mm length each side and pierced 107.00 No

through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in

Ceiling with necessary finishing.

5.7 240.00 Providing 2.5mm.thick laminated acrylic sheet 18.00 No

to cover the fan hook or Fan box.

Supplying and erecting 19 / 20 mm. nominal

bore Medium Class M.S. Pipe down rod

5.8 240.00 erected duly painted for fan complete with 107.00 Mtr

proper insulation without leakage and

Supplying & erecting single phase approved

make industrial exhaust fan suitable for

medium duty ring mounted low noise

operation suitable for medium duty having

following dia size and maximum speed in

5.1 6.00 Providing suitable M.S. louver shutter of the 365.00 No

Supplying & erecting electro galvanised G.I.

wire micro mesh jali cover of grade

5.11 5.00 required size with suitable wooden frame duly 628.00 Sqmtr

fitted in wall outside of exhaust fan for insect

SUB - TOTAL OF Light Fixtures & Fans

6 External lighting

Supply , Installation, testing and

commissioning of pre-wired, LED fitting /post

top luminaries etc of all typesof external lights,

complete with all accessories and tube etc.

directly on pole / pole bracket , including

connection with 1.5 / 2.5 sq. mm FRLS PVC

insulated,3 core flexible, copper conductor,

with flexible conduits and coupler and

earthing etc. as required.

Supplying and erecting LED street light /

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High

pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may

select any wattage capacity between the

(A) Street Light (IP-65), Surge protection -4KV

/5000K integral and 10 kv non integral ,Light

6.1.1 must have 440VAC line supply protection. It

should withstand 48 hours for 440VAC line

(f) Above 60 watts to 90 watts ( Required 72w

(B) Flood Light (IP-65), Surge -4KV/5000K

6.1.2 ,Light must have 440VAC line supply

protection. It should withstand 48 hours for

440VAC line supply

6.1.2.a 4.00 (c) Above 60 watts to 90 watts 6028.00 No

6.1.2.b 4.00 (v) above 120 to 160 watts 8370.00 No

6.1.2c 2.00 (vii) above 200 to 250 watts 10711.00 No

(C) Post Top Lantern Decorative LED fitting

comprises of Copper dust finish cast

6.1.3 aluminum spigot and spun aluminum canopy

fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and

accessories wired upto terminal block.IP

4.00 (b)32-40W ( Required 40w ) 4772.00 No

Supply of approved make frp/grp pole having

followiing specifications :

FRP/GRP pole made by centrifugal moulding

process using thermoset resin

polyester/epoxy resin system having minimum

glass content 45.0%.The pole should be in

one pieceand tapered round in shape,having

smooth outside surface finish and should be

totally fre from corrosion as well as non

conductive and shock proof. Pole should be

6.2 provided with FRP/GRP base bracket dully

fabricated from metal(M.S) and dully claded

with FRP/GRP material to avoid any metal

exposer and painted with PU paint.

Pole should mechanical properties i.e

Specfic gravity (ASTM D 792) 1.3‐1.8 Kg/m3,

2. Glass Content % by weight (ASTM D 2584)

45.0 ‐55.0%, 3. Water absorption (ASTM D

570) <0.5%, 4. Tensile Strength(ASTM D 638)

200+/‐50Mpa, 5. Flexural strength (ASTM D

790) 250+/‐50Mpa, 6. Compressive Strength

(ASTM D 695) 200+/‐50MPa, 7. Yeild

Strength(ASTM D638) 250 +/‐50MPa.

Pole should be flame retardant as per IS

6746.Resin used shall be UV resistance and

pigmented. Pole should be painted with first

coat of epoxy primer and then two coat of

highly weather resistance polyurethen paint to

ensure proper addhesion of the

paint.Minimum thickness shall be 80 to

micron.Defelection of the pole shall not

exceed more than 10.0 % of the length of the

pole for the given load.Pole should be

generally made as per the dimensional

data,performance criteria and some

interchagebility features of poles as per the

standard ANSI C123.20 latest version of

ASTM D 923/01 including cable termination

box with necessory accessories.The size of

pole and type of installation with foundation

Anchor Base & Internal junction box as per

the manufacturer details and site requirement

. The cost of 6 Mtr & 10 Mtr pole's Flood light

mounting ring is included.

(3) 'B' class (Heavy Duty) frp/grp pole

suitable for base plate mounting

[D] Overall Length of 6.0 meter, Average

thickness : 7mm, Top/Bottom Outside Dia.

76/176mm +/‐2.Weight of Pole 25.0 Kg

14.00 approx. (Without base) Metal Anchor Base 16815.00 E.a.

dully frp claded (Size : 340 Ø * 12mmthk

Mounting hole PCD 285mm * 6 nos. of 20 Ø

Providing FRP/GRP arm bracket of having

6.3 15˚ arm with 50 mm OD pipe *5 mm

thk,1000mm long from pole centre

6.3.1 14.00 (a) Single arm bracket 1882.00 No

6.3.2 1.00 (b) Double arm bracket 2390.00 No

Supplying & erecting sintex make SMC

press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with

bakelite connector strip 4way & hinged doors

having locking arrangements with mounting

clamp with nuts, bolts & washers suitable for

erection on wall ( c)150mm x 125mm x

Providing cement concrete.for foundation or

for concrete filling in 1:2:4 ratio with 20 to

6.5 11.00 mm stone metal duly plastered with 5077.00 CU Mtr

necessary curing for pole muffing or any other

B' class galvanised iron pipe 32 mm outside

dia 45 cms long duly welded on 20 cms x

cms x 3 mm thick M.S. base plate, erected on

wall or corner for mounting street light

luminaire with necessary hardware materials

SUB - TOTAL OF External Lighting

Supplying & erecting approved make

Automatic liquid level controller 6A. with

7.1 1.00 sensor testing as per instruction of Engineer 2332.00 Job

in charge on site complete with wiring

connection with existing wires , with copper

conductor from pump to upper and lower tank.

Supplying and erecting Flexible PVC

7.2 insulated multistrand multicore 1.1 kv grade

ISI marked copper wires of following size to

be erected as directed.

90.00 e) 1.50 Sq.mm 3 core round PVC sheathed 46.00 Mtr

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete

to be erected on/in wall or ceiling erected

7.3 with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as

Providing & erecting water cooler having

storage capacity 150 Ltr. & cooling capacity

150 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by

15˚C within a hour, The water cooler should

7.4 4.00 be comprising of hermetically sealed 55340.00 No

compressor, fan motor, condensing unit,

water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with

necessary inlet & outlet connection. The body

of water cooler will be made from Stainless

Supplying and erecting water filter cum

7.5 4.00 purifier with ultra violate technology. 5371.00 No

(Aquaguard / waterdoc model or equivalent

symphony/ crystal/videocon model)

Providing & erecting open well horizontal

mono block pump set with cast iron body,

complete for three phase submersible motor

[D] For 5 HP 3 phase open well horizontal

7.6.1 2.00 mono block pump set suitable for 1350 LPM 18561.00 No

to 310 LPM @ 10 to 42 Mtr head suitable for

50/65 mm dia delivery pipe

[C] For 3 HP 3 phase open well horizontal

7.6.2 1.00 mono block pump set suitable for 85 LPM to 15552.00 No

270 LPM @ 11 mtr to 33 mtr head suitable for

50/65 mm dia delivery pipe

Supplying & erecting approved make motor

control cubical panel (Direct - on - line) made

from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors

and locking, arrangement consisting of

suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing

preventer, indicating lamps for R- Y - B

7.7 phases, overload relay, Automatic water level

controller, Ammeter, Voltmeter each with two

way selector switch incoming, wires duly

socket crimped, main contactor & overload

relay, start - stop push buttons, to be erected

on angle iron frame grouted on wall as

directed. The isolator, overload relay &

contactors will be of L & T, Siemens or BCH

2.00 (a) DOL up to 5.0 H.P. 7646.00 No

Supplying & erecting approved make 3 phase

motor control cubical panel ( Star - Delta)

made from16 G. CRCA sheet duly painted

with epoxy powder painted inside and outside

with hinged doors and locking arrangement,

consisting of suitable size of ON- OFF isolator

(AC - 3/23 duty) main fuses, single phasing

preventer cum water level. Guard (Complete

unit), Toggle switch to by pass Single phase

7.8 preventer cum WLG, indicating lamps for R-

Y- B phases, over load relay, Automatic water

level controller, Ammeter & Voltmeter each

with two way selector switch incoming wires

duly socket Crimped, Panel to be erected on

angle iron frame grouted on wall as directed.

Star Delta & main contactor, overload relay,

thermal / Electronic Star delta cutoff timer,

start - stop push buttons. The isolator

overload relay & contactors of L& T, Siemens

or Cuttler Hamer make only. Panel to be

erected on angle iron frame ground on wall.

1.00 (A) S/D up to 7.5 H.P. for sewerage pump in 12865.00 No

Charges for doing liasioning work for

obtaining the necessary clearances from the

Electrical inspector / competent Authorities for

the total Electrical installation,co-ordinating

with various agencies. All necessary

drawings, calculations, test certificates, etc.

7.9 1.00 as required by these authorities shall be 41000.00 No

prepared and furnished by the EPC Vendor.

Any modification/rectification as required by

these authorities shall be carried out by

theEPC Vendor at free of cost. The fees

required to be paid to these authorities for

inspection shall be borne by Owner on

production of documentary evidences.

SUB - TOTAL OF MISC. Work

Final specification and block diagram shall be

submitted by CCTV camera system vendor.

Supply,installation,Testing and

Commissioning of 5MP, 1/2.7"CMOS,IP Fix

Dome camera, 2592x1944@30fps IR

2592x1944@30fps IR Range:30M,120dB

WDR Triple-Stream (Main/Sub/Third),Built-in

Mic, SD Card Slot up to 256GB, Multiple AI

Support,Metal, IP67. Built-in-mic , 3.6mm

Color 0.003lux @ F1.6(AGC ON) ; B/W 0 lux

@ IR ON, H.265+/H.265/H.264 Video

compressions, Privacy masking Off/On (4

8.1 20.00 Zone, Rectangle), Face Recognition (FR), 9208.52 No

Human & Vehicle Detection (PD & VD),

Perimeter Intrusion Detection (PID),Line

Crossing Detection (LCD), Cross Counting

(CC), Stationary Object Detection (SOD),Heat

Map (HM), Crowd Density Detection (CD),

Queue Length Detection (QD), Rare Sound

Detection (RSD), Main Stream

@30fps,ONVIF( Profile S/G/T)

CE,FCC,RHOS,BIS, ISO9001 certified,

DC12V / POE ( IEEE802.3af)

Supply,installation,Testing and

Commissioning of 5 MP IP Fix Bullet, 1/2.7"

CMOS,2592x1944@30fps IR Range: 30M,

120dB WDR Triple-Stream (Main/Sub/Third),

Built-in Mic, SD Card Slot up to 256GB,

Multiple AI Support, Metal, IP67,Built-in-mic

3.6mm , Color 0.003lux @ F1.6(AGC ON) ;

B/W 0 lux @ IR ON, H.265+/H.265/H.264

Video Compressions, Privacy masking Off/On

8.2 6.00 (4 Zone, Rectangle), Face Recognition (FR), 9114.87 No

Human & Vehicle Detection (PD & VD),

Perimeter Intrusion Detection (PID),Line

Crossing Detection (LCD), Cross Counting

(CC), Stationary Object Detection (SOD),Heat

Map (HM), Crowd Density Detection (CD),

Queue Length Detection (QD), Rare Sound

Detection (RSD), Main Stream

@30fps,ONVIF( Profile S/G/T)

CE,FCC,RHOS,BIS, ISO9001 certified,

DC12V / POE ( IEEE802.3af)

S.I.T.C. of 32CH,4SATA NVR having

Through put: 320 Mbps incoming / 320Mbps

outgoing, 4SATA interfaces, up to 12TB

connect camera at up to 12MP, 2 x RJ45,

2HDMI Port,1 VGA Alarm input/out : 16in /

1out, Play back 1080P: 480fps,Max.

16CH,Audio: G.711a,G.711u

Video:H264/H265,WEB IE 10/11,Safari V12.1

above, Edge V.79 above,FireFox V.52 above,

cloud storage ( Dropbox & Google

Drive),Onvif ( profile S/G/T) USB2.0*1 front,

USB3.0*1 Rear,Face Detection &

recognition,Vehicle & Pedestrian

Detection,Perimeter intrusion detection,Cross

counting,Heat Map,crowd density

detection,Object detection,Video

Tempering,QueueLength detection, License

plate detection,Rare sound detection,Region

Entrance & Existing, CE,FCC,RHOS,BIS ,ISO

9001 certified.

8.4 2.00 Supply Installation Testing & Commissioning 25150.00 No

of 8TB Surveillance Harddisk

Supply, Installation, Testing and

Commissioning of 43 inch, Professional LED

Display Cum Commercial TV with Android

& Inbuilt play store, UHD resolution, 400 nits

brightness, It's 24*7 usage, 50,000 hours life,

3 years warranty, Android 11 with inbuilt play

store, Inbuilt wifi, Landscape / Portrait mode,

Inbuilt Bluetooth, 2 GB / 16 GB Memory,

Inbuilt SOC with HDMI cable

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete

to be erected on/in wall or ceiling erected

8.6 with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as

CAT 6 UTP Cable

Supplying & erecting approved make LAN

8.7 cable of following size in existing pipe as per

8.8.1 1.00 Supply, Installation, Testing & Commissioning 12053.57 No

of 9U wall mount rack.

8.8.2 1.00 Supply, Installation, Testing & Commissioning 12840.00 No

of weather proof outdoor rack.

SITC of 24 x 10/100/1000BASE-T PoE ports

4 x Gigabit RJ45/SFP Combo ports Advanced

L2 switching and security features L2+ Static

8.9 1.00 Routing Optional “standard mode” or 31680.00 No

“surveillance mode” management user

interface 193 W PoE budget (Including Five

year free maintenance with guarantee)

SITC of 8 x 10/100/1000BASE-T PoE ports

x Gigabit SFP ports Advanced L2 switching

and security features L2+ Static Routing

Optional “standard mode” or surveillance

mode” management user interface 65W PoE

[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

Supply, Installation Testing & Commissioning

5 Mtr. HDMI Interface Cable as per the

8.11 1.00 detailed Specifications supports transmission 820.00 No

of 4K Signals as per the detailed

Supply, installation, fixing, testing and

commissioning of PVC Junction box for CCTV

8.12 26.00 Camera, IP65, outdoor application. Junction 440.00 No

Box size will be as per vendor's requirement

and site condition.

SITC of Patch Panel Cat 6 UTP Keystone

8.13 1.00 Type- 24 Port-Fully Loaded (Including Five 4357.00 No

year free maintenance with guarantee)

8.14 26.00 SITC of Jack Cat 6 Keystone UTP (Including 160.00 No

Five year free maintenance with guarantee)

SITC of CAT6 UTP 24AWG PATCH

8.15 26.00 CORD:1M,Plug 30U' Snag less (Including 155.00 No

Five year free maintenance with guarantee)

SUB -TOTAL OF CCTV SYSTEM

9 FIRE DETCTION & FIRE ALARM SYSTEM

Supply, Installation, Testing & Commissioning

of Microprocessor based Networkable

Analogue Addressable Fire Alarm Control

Panel. The Panel shall be compliant with

EN54-2, EN54-4 and approved by LPCB. The

Fire Alarm Control Panel shall have inbuilt

loops and expandable capacity upto 8 loops.

The Panel must have Full colour 800 x

LCD with resistive touch screen and

automatic backlight dimming. The Panel must

also have the capability to take Addressable

Intelligent Wired and Wireless Devices on

same loop. Each loop shall have a capacity of

127 analogue Addressable devices and

Base sounders/Base Sounder Beacons. The

panel shall have an event log of minimum

10,000 events @ 1 second resolution,

Filterable and Printable. The Panel shall have

Three access levels. Panel shall support upto

5000 Cause & Effects entries, with upto

20,000 inputs controlling & 20,000 Controlling

9.1 1.00 outputs across the network. The Panel shall 203348.75 No

have capability for Peer to Peer networking

through RS485 network card. The Panel must

have 4 inbuilt programmable sounder circuits,

each circuit rated at 2.5A.The Panel must

have inbuilt 3 programmable inputs and

inbuilt programmable relay outputs. The Panel

shall have up to sub-addressable

programmable Inputs/Outputs via optional

RS485 COMMS serially connected

expansion cards. The Panel shall have 240 V

AC power supply along with automatic Battery

Charger. The Panel shall be fully expandable

via common plug in loop driver boards. The

user shall have a choice of using the panel

with 5.25 Amp or 10.25 Amp power supply

unit which is inbuilt in the FACP and should

be approved to EN54-4. The Panel shall have

configurable via USB port to PC or memory

stick. The Panel shall have dedicated RS232

serial port for optional printer. Approved by

Supply, Installation, Testing & Commissioning

of Active Repeater Panel to be integrated with

Fire Alarm Control Panel,larger display Full

9.2 1.00 colour 800 x 480 LCD with resistive touch 86692.75 No

screen and automatic back-light dimming and

the status of any Fire/Fault of Integrated Fire

Alarm Panels, Panel should compliant with

EN54-2, EN54-4 and Approved by LPCB

SITC of Analogue Addressable Multi- Sensor

which is fully compatible with Analogue

Addressable Protocol,having removable high

performance chamber with Twin fire LED's

allow 360 degree viewing, User selectable

9.3 90.00 sensitivity modes 1% to 4.5% obs/m, 3597.20 No

Incorporate Optical and dual Heat elements,

lock mechanism (sensor to base),

Electronically addressed, Pulsing/non-pulsing

controlled from panel. Approved by LPCB &

VdS. (Including Five year free maintenance

with guarantee)

SITC of Analogue Addressable Multi- Heat

Sensor which is fully compatible with

Analogue Addressable Protocol,having

removable high performance chamber with

Twin fire LED's allow 360 degree viewing,

User selectable sensitivity modes 0 to

10.3 40.00 degree Celsius, Incorporates Fixed 3498.30 No

Temperature and Rate Of Rise Heat

elements, lock mechanism (sensor to base),

Electronically addressed, Pulsing/non-pulsing

controlled from panel. Approved by LPCB

(EN54: Part 5) (Including Five year free

maintenance with guarantee)

Supply, Installation, Testing & Commissioning

of Analogue Addressable Single Input

Module. which Includes a single monitored

input, flying leads for easy installation.

Electronically addressed, Approved by LPCB

Supply, Installation, Testing & Commissioning

of Analogue Addressable Single Output

9.5 5.00 Module . which Includes a single output, flying 4688.55 No

leads for easy installation. Electronically

addressed, Approved by LPCB & Vds.

SITC of sensor common mounting base,

includes stainless steel contacts, slim profile -

9.6 130.00 only 8mm, quick connection via square cable 354.20 No

clamps, facility for remote indicator, Approved

by LPCB (Including Five year free

maintenance with guarantee)

Supply,Instllation,Testing and Commissioning

of Fault isolator Module capable of monitoring

9.7 12.00 shorted loop circuit and automatically restore 2477.10 No

communications when shorted conditions are

corrected (Including Five year free

maintenance with guarantee)

Supplying, installation, testing &

commissioning of response indicator on

9.8 8.00 surface/recessed MS Box having two LED, 193.20 No

metallic cover complete with all connections

etc as required.

SITC of Manual Call Point approved to EN54-

9.9 12.00 11:2001, Approved by LPCB Easy to install, 4191.75 No

push-fit wiring terminals (Including Five year

free maintenance with guarantee)

SITC of Analogue addressable loop powered

Base Sounder, variable sound output 50 ~

dB(A) (±2 dB(A)) output at 1 metre, 51 user-

selectable tones (all tones EN54-3

compatible), Auto shutdown feature prevents

noise-pollution, Approved by LPCB & VdS

(Including Five year free maintenance with

Supplying & laying of 2x1.5 sqmm fire alarm

armoured cable, 600/1000V rated with

9.11 1250.00 annealed copper conductor having XLPE 135.70 Mtr

insulation, steel wire armouring & FRLS

outer sheath complete as required.

SUB -TOTAL OF FIRE DETECTION&

10 PASSENGERS ELEVATOR

Supply ,installing , commissioning and testing

of M.R.L. Passengers Elevator 8 to

passengers as per R & B S.O.R ( Category -

Premium ) having following specifications:-

Ground+ 5 upper floor

Supplying, Erecting, Testing &

Commissioning the passenger lift having

following main features:

[1] GEAR LESS LIFT DRIVE comprising of

High Starting torque Lift 3 phase 440 V

A. C. Permanent Magnet Synchronous motor

of proper rating with high efficiency shall be

[2] Micro processor based / PLC, ACVVVF,

vector control drive with encoder feedback

closed loop system shall be used for lift car

and door operation which shall be full

collective selective operation hall call demand

response, UP/DOWN hall stops, Main, Up/

Down Contactor with overload and phase

reversal relay and safety controls.

[3] Car with M S platform with bracings of

adequate size and to sustain the impact load

cabin + passenger with safety factor of fire for

steel and side panels of Stainless steel of

sheet of grade 304 duty. Car ceiling will be

S.S. finishes with aesthetic appearance with

LED ceiling lights. Car flooring shall be of anti

skid PVC with choice of colour of engineer in

charge. Car doors shall be of stainless steel

grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will

also be S.S. 304 finished with emergency

stop device, mechanical door safety device,

facility of auto/ attended mode. All car panel

buttons and all floor switches must be with

brail language as per lift act.

[4] All landing doors must be fire rated for

hour shall be fully automatic centre opening/

telescopic opening made of hairline finish

steel grade of 304 with key holes and infrared