Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹3.6 L+₹9,785.30 (2.80%)Rejected-Finance DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 176001 | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | Sanjay Kumar L2 | SURAJ KUMAR RATTAN L1 |
|---|---|---|---|---|---|
| 1.00 | Excavation in foundations, trenches, etc., in all types of soil, including pick work, jumper work, chiselling of hard or soft rock where blasting is prohibited, and excavation in slushy, marshy (daldal), or saturated soil; including dewatering by pumping or bailing out water at all depths. The work also includes stacking the excavated soil within site limits, away from the edge of excavation; refilling the stacked soil in 15 cm (fifteen centimeters) thick layers into plinths or foundations, as required; consolidating each layer by ramming and watering; and disposing of all surplus excavated earth — complete in all respects, as per the direction and to the full satisfaction of the Engineer-in-Charge, within all leads and lifts. | 55.62 | Cum | 510 ₹28,366.2 | 490 ₹27,253.8 Lowest |
| 2.00 | Providing and laying cement concrete 1:4:8(1:cement :4 sand:8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth i/c carriage of material complete in all respect within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. | 2.52 | Cum | 7,350 ₹18,522 | 7,200 ₹18,144 Lowest |
| 3.00 | Providing form work with steel plates 3.15 mm thick welded with angles iron in frame 30 x 30 x 5 mm so as to give a fair finish including centering shuttering struting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor two ceiling not exceeding 4 meters and removal of the same for in-situ- reinforced concrete and plain concrete in: Vertical surface such as wall (any thickness) partition and the like i/c attached pillasters, butresses plinth and string course complete in all respect including all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. | 61.4 | Sqm | 360 ₹22,104 | 350 ₹21,490 Lowest |
| 4.00 | Providing and laying cement concrete 1:3:6 (1cement:3 sand:6 graded stone aggregate 20mm nominal size) curring complete excluding cost of form work in foundation and plinth complete in all respect including all leads and Lifts as per the direction and to be entire satisfaction of Engineer-In-Charge. | 25.51 | Cum | 7,890 ₹2,01,273.9 | 7,700 ₹1,96,427 Lowest |
| 5.00 | Providing and laying mild steel /tor steel reinforcement for RCC work i/c bending binding and placing in position complete including cost of binding wire up to all floor level complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts. | 86 | Kg | 90 ₹7,740 | 86 ₹7,396 Lowest |
| 6.00 | Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : In foundation and Plinth complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts. | 3.46 | Cum | 8,650 ₹29,929 | 8,500 ₹29,410 Lowest |
| 7.00 | WIRE ROPES & ACCESSORIES SUSPENSION BRIDGES - Supplying, hoisting and streching to specified profile wire rope for suspension bridges. (including guy ropes) complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts. | 1.88 | Qtl | 15,100 ₹28,388 | 14,900 ₹28,012 Lowest |
| 8.00 | Providing and fixing in position steel accessories like clamps, suspenders, rope grips,U-Bolts ancherage bolts with pulleys etc.alongwith fixrures for suspension bridges complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.. | 1 | Qtl | 12,500 ₹12,500 | 12,300 ₹12,300 Lowest |
| 9.00Relaying, jointing & testing of GMS (plan ended pipe) with 100% circumfrential butt welded joints by electrical arc welding with minimum two layers capable to withstand required test pressure (minimum welding thickness shall be equal to pipe wall thickness) including manufacturing and fabrication of reducers/ tapers, all short pieces, bends of required degree as per site requirement made from parent tubes. dully welded in three layers (two for outer & one on inner side) and all other operation such as cutting, cleaning, welding, jointing, fabrication of bends, tees etc, lowering and laying in excavated trench to ensure required level i/c flushing, cleaning, and hydraulic testing complete in all respect including all leads and lifts as per the direction and to the entire satisfection of Engineer-In-Charge. | |||||
| 9.10 | 80 mm dia (H. P/E) | 48 | Rmt | 120 ₹5,760 | 105 ₹5,040 Lowest |
Tender Value
₹3.5 L
EMD Value
₹6,990
Closing Date
13 Oct 2025, 11:00 amClosed
EXECUTIVE ENGINEER
JSD DHARMSHALA
Sub Head Construction of Khad Xing over Baner Khad for Gravity Main 80 mm dia
2025_HPIPH_116707_1
NO. EE/JSD/EA-I/9755-9854
Open Tender
Civil Works
Item Rate
90 days
Dharamshala
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹6,990
15 Oct 2025
3 Oct 2025
13 Oct 2025
3 Oct 2025
13 Oct 2025
6 Oct 2025
3 Oct 2025 - 6 Oct 2025
Amount
Excavation in foundations, trenches, etc., in all types of soil, including pick work, jumper work, chiselling of hard or soft rock where blasting is prohibited, and excavation in slushy, marshy (daldal), or saturated soil; including dewatering by pumping or bailing out water at all depths. The work also includes stacking the excavated soil within site limits, away from the edge of excavation; refilling the stacked soil in 15 cm (fifteen centimeters) thick layers into plinths or foundations, as required; consolidating each layer by ramming and watering; and disposing of all surplus excavated earth — complete in all respects, as per the direction and to the full satisfaction of the Engineer-in-Charge, within all leads and lifts.
Providing and laying cement concrete 1:4:8(1:cement :4 sand:8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth i/c carriage of material complete in all respect within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge.
Providing form work with steel plates 3.15 mm thick welded with angles iron in frame 30 x 30 x 5 mm so as to give a fair finish including centering shuttering struting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor two ceiling not exceeding 4 meters and removal of the same for in-situ- reinforced concrete and plain concrete in: Vertical surface such as wall (any thickness) partition and the like i/c attached pillasters, butresses plinth and string course complete in all respect including all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge.
Providing and laying cement concrete 1:3:6 (1cement:3 sand:6 graded stone aggregate 20mm nominal size) curring complete excluding cost of form work in foundation and plinth complete in all respect including all leads and Lifts as per the direction and to be entire satisfaction of Engineer-In-Charge.
Providing and laying mild steel /tor steel reinforcement for RCC work i/c bending binding and placing in position complete including cost of binding wire up to all floor level complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.
Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : In foundation and Plinth complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.
WIRE ROPES & ACCESSORIES SUSPENSION BRIDGES - Supplying, hoisting and streching to specified profile wire rope for suspension bridges. (including guy ropes) complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.
Providing and fixing in position steel accessories like clamps, suspenders, rope grips,U-Bolts ancherage bolts with pulleys etc.alongwith fixrures for suspension bridges complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts..
Relaying, jointing & testing of GMS (plan ended pipe) with 100% circumfrential butt welded joints by electrical arc welding with minimum two layers capable to withstand required test pressure (minimum welding thickness shall be equal to pipe wall thickness) including manufacturing and fabrication of reducers/ tapers, all short pieces, bends of required degree as per site requirement made from parent tubes. dully welded in three layers (two for outer & one on inner side) and all other operation such as cutting, cleaning, welding, jointing, fabrication of bends, tees etc, lowering and laying in excavated trench to ensure required level i/c flushing, cleaning, and hydraulic testing complete in all respect including all leads and lifts as per the direction and to the entire satisfection of Engineer-In-Charge.
80 mm dia (H. P/E)
50 mm dia (M. S/S)
Sanjay Kumar (BID ID -569481)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .