Supply, Installation and Commissionig of 30KVD DG Set in Block Panchayth Office Irinjalakuda, Thrissur (ELECTRICAL)

Amount

SITC of 30 KVA DG set and LT Panel

od1370885/2021_2022 : Supply, Loading, Conveyance, Unloading, Erection, Testing and Commissioning of 30 KVA DG Set with Acoustic enclosure as per CPCB II norms and as detailed below . (1). Engine (a). Make of engine - Cummins / Caterpillar /Leyland. (b). Type of Engine - Diesel Engine.(c). No of Cylinders -As per manufactures standars.(d). Method of cooling - Water cooled with radiator.(e). Aspiration- Naturally Aspirated.(f). Design - Suitable for generating set operation.(g). Output - Suitable for generating set operation.(2). Standard accessories with Diesel Engine. (a). Fly wheel.(b).Close Coupled.(c). Air cleaner.d). Radiator with fan provided with fan guard.(e). Fuel Pump.(f). Mechanical governor.(g). Fuel filter.(h). Lubricating oil filter.(i). Residential type exhaust silencer. (j). Battery Charger / Generator.(3). Engine Instrument Panel with the-following items.(a). Starting switch with key or button (b). Lubricating oil pressure gauge.(c).Water temperature gauge.(d). RPM Indicator with hour meter. (e). Battery charging ammeter.(4). Safety Controls for Engine. (a). Battery control (trip) for low lubricating oil pressure.(b).Battery control (trip) for high water temperature. (5). Brush less alternator. (a). Make - Stamford /BHEL /Leroy somer. (b). Type - Self exited and self regulated. (c). Capacity -30 KVA/ 24 KW @0.8PF. (d). System of Voltage - 3Phase, 415V, 4Wire system.(f). Speed - 1500 rpm.(g).Frequency - 50Hz.(h). Insulation - Class F/H.The alternator should confirm to IS4722/IS13365. Operation and service manual shall be provided. (6). Fuel Tank. Suitable size fitted (built in type) inside the acoustic enclosure. (7). Battery. Suitable size fully charged battery with leads and terminals of appropriate AH capacity as per Manufactures required including battery charger. (8)separate battery charger from grid supply (9). Standard control panel. (a) 100A MCCB(35 KA) Set at 42A and stand by low set earth fault relay using suitable size neutral CT. (b). 1No multi function meter suitable for display of current-in 3 Phases, voltage in 3 Phases, frequency, power factor, KVA, KVAh, KVAr, KVArh, KW etc. (c).1No separate KWH meter (d). Necessary measuring CTs of appropriate ratio and burden for the required meter.(e). Instrument fuse/MCB (f). Metallic DNB - 1No.(g). Solid state phase indication lamp for supply ON/OF with Fuse / MCB protection. (9). Warranted. 3 Years / 6000Hours Whichever is earlier.

od1370886/2021_2022 : Supply and providing 50/65mm/nearst size GI medium class pipe conforming to relevant IS specifications complete with heavy gauge specials such as bends, flanges etc welded and fixed at appropriate locations, providing cork sheet in between the flanges at the joints, bolting the flanges together, painting the pipe, flange etc with 2 coats of heat resistant paint suitable for outdoor applications, fixing the pipe firmly with fabricated structure/wall/any other mechanical support etc as required.- for the extension of exhaust pipe

od1370887/2021_2022 : Supplying and installation of supports, anchor bolts etc made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint

90.12.5.27 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.

90.12.7.27 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.41.1 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

90.12.39.1 : Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.

90.12.9.2 : Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench

90.12.9.3 : Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench

9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

9.1.20 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm)

od1370888/2021_2022 : Supplying and providing copper earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required. 25mm with 12 mm wide x 1 mm thick clip

od1370999/2021_2022 : Supplying and providing copper earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required.4sqmm-16 sq mm with 12 mm wide x 1 mm thick clip

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

od1370893/2021_2022 : Supply and provding test joint for earthing system using 2 nos of the following strips including cutting and bending to shape ,drilling necessary holes and fixing to the watering pipe etc as required .2x25x6 mm GI strip

od1370894/2021_2022 : Supply and providing earth lead from test joint to earth electrode using the following strips including cutting and bending to shape ,drilling necessary holes and fixing to the earth plate to test joint etc as required 25x6mm GI strip<br>

90.16.3.9 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)

90.16.1.1 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

90.16.1.5 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

90.16.5.5 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.

90.16.2.1 : Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)

90.16.2.4 : Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.40 mm dia G.I. pipe ( medium class)

90.16.5.1 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.

od1370897/2021_2022 : S&F 25X6MM Brass nut , bolt & washer

od1370898/2021_2022 : S&F 12X3MM Brass nut , bolt & washer

14.1 : Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.3 : Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres.

14.7 : Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.9 : Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

14.11 : Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

14.12.1 : Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

od1370899/2021_2022 : Supply and providing 6 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required.<br>

od1370900/2021_2022 : Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required.<br>

od1370901/2021_2022 : Supply and providing First Aid Chart ( Shock Treatment Chart ) PVC laminated /duly framed and placed in a conspicuous location for clear vision.<br>

od1370902/2021_2022 : Supply and providing 2 mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength. <br>

od1370903/2021_2022 : Supply of Diesel

od1372737/2021_2022 : Charges for Preparation of Schematic drawings/ physical drawings / site plan of the installation ,& Scheme approval and Energisation certificate from the Electrical Inspectorate including all statutory Fee . Actual Amount paid on production of Original Bll/Invoice

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.

90.14.2.2 : Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.3 : Supply and providing heavy duty 'A' section neoprene gasket in the panel board

90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

90.14.10.4 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.

od1370905/2021_2022 : Supply and providing 0.5A to 2A SP MCB and giving connection etc as required

od1370906/2021_2022 : Supply and Installation of AMF Logic Relay, EC2 Relay in the existing panel board and to made all&lt;br&gt;control wiring with all accessories and make it proper working condition of automatic operation of DG and&lt;br&gt;EB supply. (C&amp;S/L&amp;T Make)

od1370907/2021_2022 : Supply and providing electronic on delay timer for AMF operation.

od1370908/2021_2022 : Supply and providing Auxilary contactor for Control Relay , Type MCX, 2 No: + 2NC:, 415V, L&amp;T&lt;br&gt;make for AMF Operation

od1370909/2021_2022 : Supply and providing Plug in Relay , 10Amps, 2Pole, 240V AC, suitable for AMF operation with base&lt;br&gt;plate for proper mounting and giving connections etc: as required. (Salzer/L&amp;T Make

od1370910/2021_2022 : Supply and fixing of contactor MCX (4 NO)in the existing panel and giving necessary&lt;br&gt;connection etc. as required (L&amp;T /equivalent make )

od1370911/2021_2022 : Supply and fixing of MCX Front Add-on aux. contact Block 4 NC in the existing panel and giving&lt;br&gt;connection etc. as required

od1370912/2021_2022 : Supply and fixing one number 63 A (AC1 rating), 4 pole, power contactor with AC coil in the existing panel assembly as required. L&amp;T-MCX12/equivalent &lt;br&gt;

90.14.11.14 : MCCB Accessories

od1372680/2021_2022 : Supply &amp; fixing spreader upto 125A MCCB

od1370915/2021_2022 : Supply &amp; fixing Red, Green, Black, Yellow, Orange colours LED indicator, AC/DC, 22.5 mm cut out dia

od1370916/2021_2022 : Supply &amp; fixing Blue colour LED indicator, AC/DC, 22.5 mm cut out dia

od1370917/2021_2022 : Supply &amp; fixing 100/5 A, 5 VA, accuracy class 1, Resin Cast Metering CT

od1370918/2021_2022 : Supply &amp; fixing multi function meter suitable for V, A ,F, 3 phase accuracy class 1

90.14.11.1 : MCCB Accessories

90.14.11.12 : MCCB Accessories

od1370919/2021_2022 : S &amp; F Enameled Danger Notice Board of size 250 x 200 mm. with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red colour.

90.6.4.1 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

BINSON JOSEPH

Bidder Name

EMAC Automation Solutions (I) Pvt Ltd

BINSON JOSEPH