Renovation, Interior and Electrical Works for Gandhinagar Irrigation Construction Division and Sub-Division Offices at Sahyog Sankul, Sector-11, Gandhinagar.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Item Description of Item (with brief specification figures

Quantity Unit Amount

No and reference to book of specifications) Amount

Pro. And fixing single layer water proof gypsum

board 12.5mm thick sections using water proof

board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size

mm x 3 mm with intermediate channel og size

18 mm x 40 mm x 0.8 mm at 1220 mm center to

center ceiling section of size 40 mm x 35 mm x

0.55 mm at 457 mm c/c and perimeter channel

A of size 20 mm x 27 mm x 30 mm x0.5 mm at

edges & drops incl.paper tap sand sofit cleat,

anchor fastener, scoch bolt connecting

cleat,joining compound top coat on ceiling

incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing

Applying Smooth/Metalic texture paint of

heavy bodied water based acrylic paint apply

with a roller trowel or sponge depending a

textured finish on interior walls & providing

decorative appearance with all material &

labour etc. compled.

Providing and fixing Dry wall partition of

mm thick Gypsteel UltraTM stud partition

which includes one layer of tapered edge12.5

mm thick Gyproc Duraline (Conforming to EN

520:2004, Type D,F, I & R) is screw fixed with

drywall Screws of 25 mm at 300mm Centers to

either side of 70 mm Gypsteel Ultra™ C stud

(0.5mm thick having one flange of 34 mm and

another flange of 36mm made of GI steel)

placed at 610 mm center to in 72 mm Gypsteel

Ultra™ floor and ceiling channel (0.5 mm thick

3 have equal flanges of 32 mm mage of GI steel). 108.45 2638.66 Smt

which is anchored to the floor & ture ceiling

using suitable anchor fasteners or metal screws

with nylon plugs. The boards are to be fixed to

the frame work with joints staggered to avoid

leakage through joints. Finally square and

tapered edges of the boards are to be jointed

and finished so as to have flush look which

includes filling and finishing with Gyproc joiting

compound and Gyproc joint paper tape (as per

recommended practices of saint-Gobain Gyproc

Providing and fixing 10mm thick toughen glass

partition with clip connector and necessary

accessories with jointing with silicon etc.

Providing and fixing pannelling with using

aluminium Pipe 50 x 25mm framing, 12mm

Plywood, Flueted Pannel & Lamination with

solid wood moulding etc. Completed. All work

includes required all necessery hardware and

labour.Work includes cost of site installation

complete as direceted by architect and concern

engineer in charge.

Providing and fixing 12 mm thick tuffan glass

Door with Floor Spring of 80 to 100 Kg.

Capacity, top and bottom patch, S.S. Handle 10"

and wall to glass lock and necessary accessories

with jointing with silicon etc. complete.

Providing and Fixing Box Type Partition made

from 50x25 mm aluminium pipe framing and

7 mm plywood with top face finished with 3.6 mm 98.19 5796.24 Smt

MDF as per approved by E.I.C . Etc. complete.

Provoding and fixing flush door shutters, solid

core construction with frame of first class

hardwood with cross board and face veneer or

plywood face panels, including anodised

8 alluminium butt hinges with necessary screws. 10.08 1829.74 Smt

(B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door

shutters (2) 35 mm thick.

Providing & fixing rubber-/Antiviral

/Antibacterial/ Vinyle coated washable

9 imported texture wallpaper apply on smooth 5.40 1988.48 Smt

wall with necessary solutions as directed by

Full height storage Supplying, installation and

placement of wooden storage unit Overall Size:

900W X 450D X 2100H ±10mm, having top

made of 18mm thick prelam HDHMR board

with PVC edge banding. The side panels and

skirting shall be made from 18mm thick

HDHMR with PVC edge banding, while the back

panel shall be of 9mm thick prelam HDHMR.

The unit shall be provided with four openable

shutters, without handles – with provision for

finger groove type opening. Shutters and

internal shelf to be made from 18mm thick

10 prelam HDHMR with PVC edge banding, with 24.00 33500.00 No.

shelf closing hinges for smooth operation. there

will be extra metal pipe support provided below

each shelf duly powder coated. All wooden

panels shall be joined using with Minifix dowels

and other standard fitting equipment. All the

wooden panels used shall be of premium

quality HDHMR board and hardware used shall

be of approved make, as per the direction of the

Engineer-in-Charge.

750 mm H Storage Supplying, installation and

placement of wooden storage unit Overall Size:

900W X 450D X 750H ±10mm, with top made of

18mm thick HDHMR board finished with PVC

edge banding. The side panels and skirting shall

also be made of 18mm thick prelam HDHMR

with matching PVC edge banding, and the back

panel shall be constructed using 9mm thick

prelam HDHMR. The unit shall include two

openable shutters without handles, designed

with finger groove type opening provision. Both

11 the shutters and internal shelf shall be made 31.00 16500.00 No.

from 18mm thick prelam HDHMR with PVC

edge banding, and equipped with shelf closing

hinges for smooth and silent operation. All

wooden panels shall have gables and fixed

joints using Minifix dowels and other standard

fitting equipment. All the wooden panels shall

be of premium quality HDHMR board, and the

hardware used shall be of approved make as

per the direction of the Engineer-in-Charge.

Back to Back work station supply and placing of

modular workstation with storage: Overall Size

(per seat): 1400W1 X 1500W2 X 600D1 X

450D2 X 750H1 + 1200mmH2, Supplying,

installation and placement of Panel Based

Modular Workstations of 54mm thickness with

extruded aluminium arrangement for

interconnection of two adjacent panels. The

bottom block is made up of 9mm HDHMR panel

of desired shade, pasted on board baton frame

and properly screwed to end post along with

bottom electrical raceway. The electrical

raceway is covered with extruded aluminium

plates from both sides and snap fitted using

aluminium extruded raceway clips. The

worktop (1400W x 600D x 25mm) is to be made

of 25mm thick HDHMR board, with all exposed

edges covered with 2mm thick PVC edge

12 banding. ERU (End Return Unit) Overall Size: 24.00 44600.00 No.

900W X 450D X 750H ±10 mm, Storage top to

be made of 25mm thick HDHMR with PVC edge

banding. Side panel, skirting made up of 18mm

thick HDHMR with PVC edge banding. Back

panel to be made of 9mm thick HDHMR. Unit

includes two openable shutters (without

handles; finger groove type opening) and two

drawers, all provided with shelf closing hinges

and channels. Shutters and shelf made of 18mm

thick HDHMR with PVC edge banding. All

wooden panels shall be joined using Minifix

dowels and standard hardware fittings.

Material used shall be of prime quality HDHMR

board with ISI marking. Complete structure

design shall match the reference image

provided. The rate shall include all materials,

hardware, and labour etc. complete as per

instruction of Engineer-in-charge.

MAIN TABLE Overall size 2200W X 1200D X

750H, Tabletop made to the shape as per design

and having overall size of 2200W X 1200D X

70m, under structure made of 18mm thick

plywood with 0.6mm Mica pated, modesty

panel made of 25mm thick, Table fixed with

bottom edge beading as per requirement,

Modesty Panel of Main table shall be finished

with matching veneer 3±4mm of approved

grains and colour with design as per engineer in

13 charge, Side pedestal Main Table shall be sliding 2.00 17340.00 No.

drawers made of 12mm ply sides and bottom,

18mm front and within 18mm BB boxing etc

complete, Drawers provided for Main table

shall be fixed with sliding channels handles lock

set etc complete, All visible surfaces of side to

be finished with PU polish All internal and

underneath surfaces of table shall also be

finished with PU polish, All edge beading nails

screws adhesives etc complete, all wooden

surfaces shall be finished with PU polish.

THREE SEATER SOFA:- Providing Material &

Labour charges for making three seater sofa as

per given detail drawings. depth of seat is

mm to 900 mm & length 2400 mm & ht 425 mm.

All "L" type supports & Top Bottom boxes made

by 18mm Thk. Ply Wood. back rest of soffa (675

mm ht ) made by 18 mm Thk. Ply Wood Seat

area of sofa cover with 100 mm (40 density)

mm soft foam & above it 25 mm u foam finished

14 with composite lather. On back rest covers with 1.00 49692.00 No.

45mm soft + 45 mm foam, Hand rest & bottom

front is covered with 25 mm foam having

density, as shown in detail drawing. Having

mm deep ss legs of 7 nos. The foam is

surrounded with the layer of composite lather

for softness and as finishing material. Complete

with all hardware like MS nails, SS-304 screws,

Majarpat, spring, stapler, putta-pati, adhesives,

Providing and fixing Two Seater Waiting sofa

Overall Size 1190W ±10 x 670D ±10 x 785H ±10

, Seat Height 425mm , Seat & Back made of

1.2mm thick perforated sheet metal duly

powder coated , seat & back cushioning made of

Wooden Structure 6mm Ply (Hot Pressed) with

foam upholstered With Leatherette , Seat &

back made of CRCA Sheet Perforated (Base &

Back Are In Single L Shape With Radius At

Bend) Powder Coated In Silky Silver & Covered

By Cushion , Height of the seat from floor

15 425mm, Beam MS ERW Rectangular Tube Black 3.00 32825.00 No.

Powder Coated , Leg Chrome Plated

Rectangular MS Structure , Bow Shaped 1.2mm

Thick Sheet , 1.2mm Thick Arm Rest Chrome

Plated Rectangular MS Structure , Perforated

Seat & Back fixed with MS Brackets duly

powder coated , Beading Chrome Plated Ms

Channel Beading , Level Adjuster Chrome

Plated MS Cap With PVC Inserted Black Colour

All Pipes Shall Be Welded Properly Strongly and

conformity with regulations .

Providing and Arranging One seater sofa made

from 100mm thick 40 density foam with 25mm

supersoft HD Covered for softness. Seat to be

kept on high Density nylon elastic belt inside

framing size 50mm x 37mm support armrest,

legs and outer Frame having size 80mm x

37mm with inner brace between armrest and

seat frame having Size 25mm x 50mm as

16 showning the Photographs. Back 80mm thick 1.00 26310.50 No.

40 density foam with 12mm thick supersoft HD

covered for softness. Seat and back covered

with Fabric approved shade and wooden

armrest Including all materails. Hardware and

labours etc. Completes as per

drawing/Photographs & details and as Directed

by Engineer - in - charge. 1 Seater Sofa Size :-

Solid wood Corner table ,Made from teakwood

with chemical treatment, Wood must be

seasoned and passed out from chemical

treatment,Corner table with four nos solid

wooden legs and table top with 12mm thick

17 clear toughned glass / 4mm thick veener finish 3.00 10605.00 No.

top with 19mm thick BWP plywood, Table all

wooden part finish with malamine polish.Table

having one nos of shelves and properly fixed

with wooden legs.Table size is 600 x 600 x 450h

complete as per drawing given by architect &

direction given by Engineer in charge.

Solid wood Center table ,Made from teakwood

with chemical treatment, Wood must be

seasoned and passed out from chemical

treatment,Center table with four nos solid

wooden legs and table top with 12mm thick

clear toughned glass / 4mm thick veener finish

top with 19mm thick BWP plywood, Table all

wooden part finish with malamine polish.Table

having onenos of shelves and properly fixed

with wooden legs.Table size is 1050 x 600 x

450h complete as per drawing given by

architect & direction given by Engineer in

Providing & fixing Roller blind of Jute having

19 thickness 0.35 mm thick with acrylic coating 34.20 2744.36 Smt

Applying two coats of putty & two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade

including thoroughly brushing the surface free

from mortar dropping and other foreign matter

and sand papered smooth.

Wall painting (two coats) with plastic emulsion

paint of approvedbrand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free

from mortar droppings and other foreign

matter and sand paperedsmooth.

Renovation of existing washroom/toilet

including dismantling and removal of existing

sanitary fixtures, wash basin, water closet, taps,

plumbing, floor/wall tiles and other items as

required, including disposal of debris;

providing and fixing new approved quality

sanitary fixtures, wash basin, water closet, taps,

plumbing, floor/wall tiles and other items as

requiredand wall and floor tiles with necessary

surface preparation, adhesive/mortar and joint

finishing; providing and fixing new wash basin

with waste coupling, bottle trap, brackets and

accessories; providing and fixing new water

closet complete with cistern/flush

22 arrangement, seat and cover; providing and 1.00 100000.00 No

modifying/replacing water supply and

drainage plumbing lines including CPVC/PVC

pipes, fittings, valves, traps and necessary

accessories; providing and fixing taps, angle

valves, health faucet, shower and other sanitary

fittings as required; including necessary

cutting, chasing, making good, waterproofing

wherever required, testing, cleaning and final

finishing. The rate shall include all materials,

sanitaryware, tiles, plumbing fittings, fixtures,

labour, transportation, disposal of debris and

all incidental works etc complete as per

specifications and instructions of the Engineer-

P & L 24" x 24" vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive

material including dismentaling of existing

flooring and jointed with color cement slurry

including finised with flush pointing & cleaning

the surface etc. complete for light shade

Providing 15mm thick cement plaster in single

coat on Rough (Similar)side of single or half

brick walls for interior plastering upto floor two

level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) (Interior

Providing, Supplying, Installation, Testing and

Commissioning of complete electrical works for

office renovation, including internal

electrification with proper wiring in suitable

PVC conduit, all modular switches and sockets

LED procurement and light fittings, ceiling fans,

25 , distribution boards, power outlets, LT cabling, 1.00 500000.00 LS

data and communication wiring, earthing

system, and all other allied electrical works, as

directed by the Architect and Engineer-in-

Charge, including all materials, labour, tools,

accessories, cutting, chasing, making good and

testing, complete in all respects.

High Back Mesh Revolving Chair: Supplying,

installation and placing of high back revolving

office chair with ergonomic design, having high

backrest with breathable black mesh

upholstery, cushioned seat with high-density

PU foam and good quality fabric/leatherette

upholstery, suitable adjustable/padded

armrests, centre tilt mechanism with tilt

tension adjustment and locking provision,

26 Class-3 gas lift with height adjustment, and 12.00 9500.00 No

durable five-prong chrome/plastic-coated

metal base with twin-wheel nylon castors. The

chair shall be provided with suitable lumbar

support, smooth 360° swivel movement and all

necessary fittings and hardware for

comfortable and stable operation. The complete

chair shall be of premium quality, sturdy

construction and finished in black colour,

suitable for office use, complete in all respects

as per the approved sample and instructions of

the Engineer-in-Charge

Medium Back Mesh Revolving Chair: Supplying,

installation and placing of high back revolving

office chair with ergonomic design, having high

backrest with breathable black mesh

upholstery, cushioned seat with high-density

PU foam and good quality fabric/leatherette

upholstery, suitable adjustable/padded

armrests, centre tilt mechanism with tilt

tension adjustment and locking provision,

Class-3 gas lift with height adjustment, and

durable five-prong chrome/plastic-coated

metal base with twin-wheel nylon castors. The

chair shall be provided with suitable lumbar

support, smooth 360° swivel movement and all

necessary fittings and hardware for

comfortable and stable operation. The complete

chair shall be of premium quality, sturdy

construction and finished in black colour,

suitable for office use, complete in all respects

as per the approved sample and instructions of

the Engineer-in-Charge.

(DEDUCTION) Recovery/dismantling of

existing office furniture and modular partition

work (wooden/steel) comprising office tables,

small tables with keyboard tray and other

fittings, small drawer tables, medium drawer-

cum-tables, upper height storage units/tall

storage cupboards including shutters, shelves

and locking fittings, modular workstation

partition panels (laminate/glass paneling,

28 aluminium/steel framing, connectors, brackets -1 298150 LS -298150

and fasteners), wooden and steel chairs, and

wooden and steel benches (length more than

m), including removal of fixing screws, bolts,

connectors etc., careful dismantling without

damage to the material, stacking at site, loading,

conveyance/ transportation to the designated

store or new site and unloading, complete with

all labour, T&P and incidental charges, as

directed by the Engineer-in-Charge

I/We am/are willing to carry out the work at… ...................... % above/below percent (Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of In In

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(C)Net Tendered Amount (A-B) (in figure) ………………………………

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R. NO.: MIS102010/17/K1 Dated:30/07/2018 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of

cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender

Executive Engineer

Gandhinagar Irri. Const. Division