Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC GORUBANDHA MISSAMARI 784 506 | SONITPUR | ASSAM | 784506 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹30.6 L+₹93,143 (3.14%)Rejected-Finance AMBAGAN TEZPUR TOWN PO PS TEZPUR DIST SONITPUR ASSAM | SONITPUR | ASSAM | 784001 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹37.1 L+₹7.4 L (25.0%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹37.3 L+₹7.7 L (25.8%)Rejected-Finance CAMP AT GORUBANDHA MISSAMARI ASSAM 784506 | SONITPUR | ASSAM | 784506 | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹38.5 L+₹8.8 L (29.8%)Rejected-Finance MISSAMARI DIST SONITPUR ASSAM 784 506 | SONITPUR | ASSAM | 784506 | L5 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
19 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MISAMARI
PO-Missamari Dist-Sonitpur Assam
B/R REPAIR/ MAINT OF AIRFIELD/HANGER ETC AT ARMY AVN UNITS UNDER GE MISAMARI
2022_MES_559489_1
8321
Open Tender
Civil Works
Item Rate
270 days
GE MISAMARI
PLEASE REFER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
Yes
GE MISAMARI
₹76,000
Yes
16 May 2023
22 Oct 2022
21 Nov 2022
22 Oct 2022
19 Nov 2022
5 Nov 2022
Amount
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames), complete all as specified and as directed.
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame), complete all as specified and as directed.
S&F anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc, incl power coating above aluminium section.(minimum thickness of poweder coating 50 micron), complete all as specified and as directed.
S&F anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing anodised aluminium snap beading screws etc,power coating of any colour(thickness of power coating not less than 50 micron, complete all as specified and as directed.
S&F for anodised window shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no incl power coating of any colour (thick ness of powder coating not less than 50 micron), complete all as specified and as directed.
S&F for anodised aluminium grill ( anodised trasparent or dyed to required shade according to IS 1868 with minium anodic coating of grade AC15 of approved design/pattern with approved standared section and fixed to the exising windows frame with CP brass/ stainless steel screws @ 200 mm centre to centre ,complete all as specified and as directed.
S&F for Solid PVC Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc, complete all as specified and as directed.
Supplying and fixing in frame at site, factory made solid panel pvc moulded door shutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed.
S&F for 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.
M&L for 12 mm thick pre laminated particle board, interior grade prelaminated one side with decorative choice lamination &other side balancing white lamination fixed in screws to timber frame work, complete all as specified and as directed.
S&F for aluminium wire cloth with 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple, complete all as specified and directed.
S&F for 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21,complete all as specified and as directed.
S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises, complete all as specified and as directed.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes, complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4, complete all as specified and as directed.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes, complete all as specified and as directed.
M&L for Vitrified Ceramic double charged tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes, complete all as specified and as directed.
M&L for racking out existing sealant from joints to a depth of at least 30 mm, cleaning the grooves joints, edges up to a depth of at least 15 mm by scrapping/ grinding by mechanical means to expose the concrete surfaces, complete all as specified and as directed.
Supply and inserting 12 to 15 mm thick compressed nylon expansion joint board into the groove, over that inserting 12 to 15 mm dia closed cell baker rod maintaining uniform depth & supply and application by filling the joint with PU sealant- SIKA Hyfiex, complete all as specified and as directed.
Crack Treatment: Inspecting the surface for any cracks. Cracks if any have to be sealed with epoxy repair mortar after clean or removal of cover concrete and making 'V' groove of 20mm wide and 10mm deep cover crack line along the length of the crack by elctrically operated angle grinder with diamond concrete saw blade and cleaning it by air blower as directed by Engineer-in-Charge.
Sealing of exposed 'V' groove of 20mm deep and 10mm wide with Sikadur 31 or equivalent solvent-free, moisture tolerant, thixotropic, structural adhesive and repair mortar, based on epoxy resins and special fillers, designed for use at temperatures between +10°C and +40 °C. Product should conforms to ASTM C 881-78, Type I, Grade 3, Class B+C : compressive strength > 60 N/mm2 (14 days) according to ASTM C881 : bond strength < 10 N/mm2 (7 days) according to ASTM C882, complete all as specified and as directed.
M&L for levelling the floor surface Grinding surface without any dust, oils, laurance, cement dead mortar thickness as required as per site requirment etc and application of three component epoxy mortar Sika 41 at Required places of the floor joints to get a required finish complete all as per manufactures instruction, all as specified and directed.
Surface Preparation : Surface Preparation by removing existing flooring with mechanical means, prepare the concrete substrate with proper scarifying & diamond grinding, Shot blasting, with Vaccum cleaning to remove dirt, dust, laitance, other contaminants etc., and to form the required anchor profile on the floor substrate between the floor topping and the concrete floor, complete all as specified and as directed.
Floor Leveling (3mm thick) Providing and applying 2 part water dispersed epoxy resin primer Sikafloor ®-80 Epocem Primer followed by applying temporary moisturer barrier technology based three part, self smoothing underlay screed Sikafloor 81 Epocem to a thickness of 2mm having carbon dioxide diffusion coefficient 1782 as per Klopfer Engel fried method, Water vapour diffusion co-efficient µH2O = 177 as per DIN 52615, Water absorption co-efficient W = 0.06 kg/m2as per SN EN 1062-3, Compressive strength 55 N/ Sqmm after 28days as per ASTM C 579, Flexural strength 10 N/ Sqmm after 28days as per EN 196, When applied at minimum 3 mm thickness it can be laid over high moisture content substrate when substrate moisture is more than 4%, complete all as specified and as directed.
Installation of Epoxy topping 2mm using notch trowels and Spike rollers Providing and applying 2mm thick two part, solvent free, coloured,100% solids, self smoothing, smooth glossy, epoxy resin topping Sikafloor®-264 HC using notch trowels and spike rollers having compressive strength of 53 N/mm2 as per EN 196-1, Flexural strength of 20N/mm2 as per 196-1, Shore D Hardness 76 As per DIN 53 505, abrasion resistance 41mg ( CS10/ 1000/ 1000) as per DIN 53109. All in complete as per the manufacturers specifications and directions of the engineer in charge.
M&L for Preparation old painted concrete/bituminous pavement surfaces i.e Painting lines, dashes, arrows, letters etc., exceeding 10 cm width or girth and applying one coat of Water based acrylic runway marking paint white or golden yellow colour as per existing, all as specified and directed by Engineer-in-Charge.
M&L for Preparation old painted taxiway marking and turning pads of runway surfaces i.e Painting lines, dashes, arrows, letters etc., exceeding 10 cm width or girth and applying one coat of retro reflective white/yellow collour paint border marking as per existing, all as specified and directed by Engineer-in-Charge.
Dismantling plain or corrugated steel/ pvc sheeting any gauge and thickness, complete all as specified and as directed.
S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and as directed.
S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws , complete all as specified and as directed.
S&F Sandwich PUF corrugated/plain panels of 50 mm over thick having PPGI sheeting of not less than 0.5mm thick fixed with self tapping screw on roofs/cladding for a height up to 10 mtr, complete all as specified and as directed.
S&F 2mm thick fibre glass reinforced transucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and as directed.
S&F Plain aluminium 0.71mm thick sheeting alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing, complete all as specified and as directed.
Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise proveded for,complete all as specified and as directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) , complete all as specified and as directed.
S&F nylon HDPE bird proofing net of 2 cm pitch as directed by engr-in charge.Note9 Rate quoted by the contractor shall deemed to inclusive of necessary scaffolding and all other fittings and binding materials as required for fixing the net ,complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed.
M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement, complete all as specified and as directed. (Note : WPC Shall be measured and paid separetely)
Supply only Integral water proofing compound
M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth, complete all as specified and as directed.
M&L for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty, complete all as specified and as directed.
M&L for preparation of old wall surface applying one coat of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm, complete all as specified and as directed.
M&L for preparation of new plastered/putty surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering, complete all as specified and directed.
M&L for preparation of old decorated plastered wall surface applying One coat of oil bound distemper on wall , complete all as specified and as directed.
M&L applying a coat of 1mm thick wall care putty over plaster surface to prepare the surface even and smooth as per manufacture instruction,complete all as specified and as directed.
M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint , complete all as specified and as directed.
M&L Preparation of old painted wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed.
Preparation of old painted of steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint, complete all as specified and as directed.
M/S S.S.Corporation
bkgeneralstores
Saraswati Auto Works
MAA CONSTRUCTION
R D ENTERPRISE
Markson
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .