Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.4 LAccepted-AOC DEPOPARA PO BINNAGURI PS BANARHAT DIST JALPAIGURI WEST BENGAL PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹29.7 L+₹93,209.03 (3.24%)Rejected-Finance KHUDIRAMPALLY P O BANARHAT DISTT JALPAIGURI W B PIN 735202 | JALPAIGURI | WEST BENGAL | 735202 | L2 | Rejected-Finance OTHR THEN LOWEST BIDDER | |
| 3 | L3₹32.5 L+₹3.7 L (12.9%)Rejected-Finance DS COLONY BINNAGURI TG ROAD OPP MILAN SANGH CLUB POST BINNAGURI DISTT JALPAIGURI W B PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L3 | Rejected-Finance OTHR THEN LOWEST BIDDER | |
| 4 | L4₹33.3 L+₹4.5 L (15.8%)Rejected-Finance PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L4 | Rejected-Finance OTHR THEN LOWEST BIDDER | |
| 5 | L5₹49.0 L+₹20.2 L (70.3%)Rejected-Finance DEPOTPARA PO BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L5 | Rejected-Finance OTHR THEN LOWEST BIDDER |
Tender Value
₹36 L
EMD Value
₹72,000
Closing Date
28 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
CERTAIN PROV/SPL WORKS AS A PROVN OF 01X TOILET BTHROOM AND SOCKAGE PIT AT NEW CP-11 POST AT BINNAGURI MIL STN, PROVISION OF LOADING POINT (RAMP) NEAR PLANT MACHINERY AND EQPT PARKING SHED OF 118 ENGR REGT AND SPL REPAIR OF 03 x ESH/MAG NO 10,11 and
2022_MES_564835_2
8543/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹72,000
Yes
17 Feb 2023
24 Dec 2022
30 Jan 2023
24 Dec 2022
28 Jan 2023
2 Jan 2023
Amount
Schedule 'A'
M& L for Surface dressing n exc 15 cm deep for adjoining area complete all as specified and directed
Excavation in trenches n.exc 1.5 in deep and n.exc 1.5 m wide for foundation etc not exc 10 sqm on plan and getting out in soft / loose soil
Returning filling in, incl spreading, levelling watering & well ramming in layers n.exc 25cm in soft/loose soil.
Removing excavated material (soil) n.exc 1.5 km & depositing where directed by Engr-in-charge.
M&L for Plain Cement concrete (1:4:8) type D2 (Using 40 mm graded stone agg) in foundations,filling and mass concrete complete all as specifide as directed by the Engr-in-charge.
M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concerete complete all as specified
M&L RCC (Design mix) M-25 grade using 20mm graded stone aggr as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed
M & L RCC (Design mix) M-25 gradeusing 20mm graded stone aggr as in Columns, pillars, piers, posts and struts complete all as specified and as directed
M & L for RCC (Design mix) M-25 grade (using 12.5 mm graded stone aggregate) in Beams, cantilevers, lintels over 1.5 M span.
M & L RCC (Design mix) M-25 grade (using 20 mm graded stone aggregate) for slabs suspended on walls, beams , in floors, roofs, landings and in shelves and the like.
M & L for Formwork to Formwork to sides of pillars, posts, struts, piers,columns, and stanchions for rough finished surfaces of concrete complete all as specified and as directed
Form work to sides and soffit of beams, lintels,shelves of slabs/beams and similar works including supports, over hangs etc rough finished surfaces of concrete,flat.etc complete all as specified and as directed.
M & L for formwork to sides of concrete foundations,plinth beams for rough finished surface of concrete, complete all as specified and as directed
M & L for TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or secuiring with clips equality conforming to TMT bars
All as per item No14here-in-before but 6 to 8 mm dia as in stirrups
M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.
M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed.
S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II completed.
S&F factory made steel ventilator with top hung shutter including friction/ box type hinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and directed .
S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete.
M&L for 150 mm size aluminium anodised cast type handles.
S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section.
S&F 100mm size stainless steel butt hinges medium weight.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair.
M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only).
Supply only integral water proofing compound.
M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement.
M& l for two coat of Oil boound distember on new wall surface including preperation of the surface all as directed and specified.
M&L for applying 1.5mm thick wall care putty on new or old wall surface all as directed and specified complete.
M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of new /old wall surfaces complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth
M&L for three coat of white wash on walls on newly plastered surface incl preparation of surface.
M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge
M&L for glazed coloured ceramic tiles (350x450x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed by Engr-in-charge.
S & F of 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete
Material and labour for 300 mm thick sand filling under floors including watering and consolidation complete all as specified and directed by the Engr-in-Charge.
M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes.
Materials and labour for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified and as directed by the Engr-in-Charge.
M&L for 75mm thick PCC type C-2 (1:3:6) using 40 mm graded agg in plinth protection path/hardstanding finished cement concrete surfaces fair and even all as directed by Engineer-in-Charge.
S&F wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length.
M&L for CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 100mm) as in repair
Supply & fix angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed by the Engr-in-Charge. Make: Essco Cat Part No DLX-ESS 526 or equivalent.
Supply & fix Bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one. Make : JAQUAR Code : CON-107 KN or equivalent make as speciifed in list of makes
S&F of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, long flush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC (Make : Sleek of Hindware, Slimline of Parryware or equivalent of Cera)
S&F central hole basin mixer for WHB complete all as specified and directed.
S&F Brass CP mixer for mixing hot & cold water screweddown for iron pipeand fixed complete all as specified and directed.
S&F tubular towel rail 20mm dia D type, Brass Chromium Plated 60 cm long between flanges.
S & F stainless steel soap dish best quality fixed to plugs with chromium plated brass complete all as specified and directed
S&F of PVC connections 15 mm size with PTMT nuts of length 600 mm.
S & F Grating doom 100 mm dia with waste hole of PTMT (Minimum weight 40gms)
S&F Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed.
M&L Gun-metal, globe or gate valves,15mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as direcetd.
S&F of swivel shower of CP with shower arm 150 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed (Make : (ESSCO/LEADER/SONA/Jaquar).
S&F for PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge.
S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed by Engr-in-Charge (Bore of pipe 110mm)
S&F for PVC (SWR) vent cowl fixed to PVC Pipes etc complete all as directed by Engr-in-Charge (Bore of pipe 110mm)
Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for concealed water tubing and making good, cutting n.exc 10cm girth as in brick/stone or concrete block walls.
M & L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for this following. (a) Bore tubing 15mm
(b) Bore tubing 20mm
M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters; verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.
M&L for precast RCC 1: 1.5 :3 type B-1 using 20mm graded aggregate set in cement mortar 1:4 as in manhole covers including necessary formwork complete all as specified and as directed
S&F for PVC (SWR) (Bore of pipe 200mm) pipes with working pressure 6 kg/cm2 single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge.
S&F for PVC (SWR) bends any radius fixed to PVC Pipes complete all as directed by Engr-in-Charge (Bore of bend 200mm)
M&L PCC 1:3:6 Type C-1 (20mm graded aggregate) as in coping/benching for man holes/ surface channel.
M&L PCC 1:3:6 type C-2 concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested dia of pipe 150mm
S & F PVC(SWR) Pipes single socketed in any length with rubber rings 75 mm dia
S & F PVC (SWR) vent cowl of 75 mm dia complete all as specified and as directed.
S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Surface excavation n.exc (not exceeding) 30 cm deep and avg 15 cm deep and getting out in soft / loose soil
M & l for RCC (M-25) design mix concrete for retaining wall , basement wall ,balast wall etc of any other similar work above top of footing incl pilasters and buttresses etc complete all as specified and as directed.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed.
Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site.
Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc.
Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc
Demolition of brick walling built in cement mortar etc complete all as specified.
Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 500m and n. exc. 900m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.
M&L for MS flat iron bent to shape, holes drilled etc complete as in wind ties etc including one coat of red oxide paint.
M&L for MS plate of any size & thickness, holes drilled or without drilled etcc including one coat of red oxide paint complete all as specified and as directed.
M&L for preparartion of old surfaces applying two coat of white washing on ceiling surfacecomplete all as specified and directed.
Material and labour for applying one coat of synthetic enamel paint on old painted steel and iron surfaces of any description over 10 cm in width or girth including necessary preparation of surfaces.
Complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrapers, any number of coats and any width or girth etc and applying two coats of oil bound distemper over a coat of primer over super fine Birla or altek putty finish as required and complete all as specified and as directed by the Engr-in-Charge.
Providing and applying Fosroc Brushbond Roof Guard, a single component High build fibre Reinforced Acrylic Waterproofing render for roofing system to be applied by brush, at three coats at a minimum dry film thickness of 1mm, which should cure by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. Solid Content : 70 % Tensile strength ASTM D 412 : 1.10 Mpa Elongation ASTM D12 : 100% Resistance to ageing due to : 1000 hours UV radiation ASTM D4587 E : No Change Rapid Chloride Penetration ASTM C 1202-03 : Very low Pull off adhesion ASTM D4541 : 0.92 Mpa Resistance to Algae growth ASTM D 5589-97 : Passes, Zero rating Permeability (mm) (BSEN 12390 part 8) : 5.0 Water vapour transmission (ASTM E96) : 6.0g/m² h
M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for applying single component acrylic polymer modified, finished even and smooth without using extra cement complete all as specified and as directed. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item of this Schedule 'A').
Identify the cracks and joints, shall be chased open into ‘U’ groove shape. Prepared suitable surface as require to apply the mortar. Apply a bond coat of Fosroc Nitobond SBR Latex and sealed with Shrinkage controlled, polymer modified, fiber reinforced cementitious repair mortar, Fosroc Renderoc SP40. Fixing pvc nozzle, injection grouting to be done with cement slurry admixed with expanding grout admixture Cebex 100 to be mixed @225 gm per bag of cement
Bore packing to be done at pipe entries by forming proper formwork and filling the gap with non-shrinkable cementitious grout Conbextra GP2 and sealed with epoxy/polyester sealant
Removing & Hacking of existing concrete Carefully by low impact high frequency hammer OR by manual chipping without damaging the existing concrete or control sand blasting including cleaning the surfaces by air jet etc. complete.(Mode of measurement- per sqmt of breaking area of concrete)
For rusted metal (iron base) apply Reebaklens RR or Equivalent with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal / steel for about 5-7 days. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth.
Providing and applying two coats of Nitozinc Primer or Equivalent a two component epoxy zinc rich Primer or equivalent product on the properly cleaned and prepared steel bars after the required chipping and cleaning of the concrete surface as per the manufactures’ specification.
Providing and laying micro concrete up to the required thickness as per the drawing by consultant on the designated area to the prepared slurry tight shuttering with proper shear connector and bonding agent where ever necessary, The fluid micro-concrete repair material shall be a single component, cement based, Renderoc RG or equivalent micro-concrete to which only the site-addition of clean water (and approved graded coarse aggregates where specified) shall be permitted. The micro concrete shall contain no metallic aggregates, or chlorides and shall be shrinkage compensated in the plastic state. The micro concrete in the flow able consistency should achieve a compressive strength of 50 N/mm2 after 28 days at 30C as per BS 4551-80. The unrestrained expansion shall be between 1 - 4% as per ASTM C827-1987. Again as per BS 4551-80 the flexural strength shall not be less than 5 N/mm2 @ 28 days. The micro concrete shall have a coefficient of thermal expansion 10-12 X 10¯6/°C & Thermal conductivity 1.5 W/m°C The mixed density of micro concrete shall exceed 2100-2200 kg/m3 at 27ºC
Chase opening the Construction Joints by providing “ U ” groove, removing the dust and clean the designated area fill the prepared surface using polymer modified latex Nitobond SBR completely as per the manufacturer’s Instruction. Drilling holes of dia 18mm maximum upto Half of the Depth of the Wall. Fix the PVC Nozzles of dia 15mm and Fix it with Fosroc Renderoc Plug. Injecting cementitious Grout Fosroc Cebex 100, within the prefixed nozzles under pressure using grout pump to fill all possible pores
Identify the cracks and construction joints, honeycomb areas, shall be chased open into ‘U’ groove shape and sealed with High strength, abrasion - resistance epoxy reinstatement mortar, Fosroc Nitomortar S or Equivalent, Providing and fixing 6-8mm dia nozzle along the joints and honeycomb areas after proper surface preparation. The injection of Conbextra EP10 or Equivalent through the nozzle till the refusal of the grouting materials.
Supply and applying a bond of Fosroc Nitobond SBR Latex, or Equivalent SBR Latex based bonding agent admix with cement as per manufacturer recommended ratio.
Guniting concrete surface with single component, fibre reinforced shrinkage compensated, polymer modified structural grade repair mortar like Fosroc Renderoc SP 40 or equivalent at a thickness of 25 mm. The repair mortar should have a compressive strength 45 N/mm²,flexture strength 7 N/mm² and tensile strength 2.5 N/mm² at 28 days
M&L point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size Rigid PVC conduit pipe and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick Plastic/ Bakelite laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps.
(b) One fan / exhaust fan point controlled by one way switch 5/6 amps.
All as per item No. 97.00 here in above but wiring with 2.5 sqmm FRLSH multistranded copper conductor for one socket outlet 15/16 Amps point on independent board complete all as specified.
S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.
S&F switch socket combination 2 in 1, 3 pin , 5 and 15 amp flush type universal complete all as specified and directed.
S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.
S&F IP 20, class I, LED light 1X20 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.
S & F LED street light fittings 35 watt in aluminium PDC housing, toughned glass cover with IP66 protection complete all as spedified and as directed.
M&L for street light bracket made out of GI pipe light grade 25 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer.
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F MCB, Single pole & neutral 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge.
Supply installation, commissioning and testing of electric water heater, storage vertical type, BEE 5 star rated 25 ltrs capacity 230 volts AC 50 Hz comprising of high wattage heating element for instant heating extra thick SS inner tank of superior 304 grade or M/S tank with feroglass coating rust & shock proof ABS outer body, non- ferrous prewssure plate with and including provision of 04 Nos grouting bolts suitably flush to wall or any other surfaces 25 lts BEE 5 Star rated complete stranded copper conductor cable/ flexible chord complete all as specified and as directed.
S & F exhaust fan , steel body AC single phase, 230 V of size 300 mm sweep with blades and frames and louvers completa all as specified
Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 10 sqmm 2 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: Havells/KEI / POLYCAB/RR Kable/Gloster cable) (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').
Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.
Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.
M & L for horizontal boring across the existing road without disturbing the road surface for inserting GI pipe complete all as specified and as directed. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch 'A'.
M&L for 50 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed. Make: Tata/Jindal/Bansal
Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm directed by Engineer-in-charge.
Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 25 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge.
S. G. CONSTRUCTION
M/S RATNESH KUMAR SINGH
L. B. SHARMA
SHRI MANOIRANJAN BISWAS
M/S MAJUMDER CONSTRUCTION
Biswanath Sharma
M/S ALOKE CHAKRABORTY and CO
MESSRS SEN BROTHERS
M/S PLABAN KUMAR GOPE
SUMAN CHAKRABORTY
Bidder Name
L. B. SHARMA
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .