Repair Renovation of Peripheral market Daily market of Burnpur etc Construction of Community centers with toilet and repairingrenovation of community centers in peripheral villages of Burnpur Repair Construction of roads Infrastructure development in peripheral villages

S.No. Description of work Rs.)

Plumbing works, DSR 2022

(E&M) for Electrical works

Repair & Renovation of Peripheral

market/Daily market of Burnpur

Construction of Community centers with toilet

2 and repairing/renovation of community 4,143,356.37 23,890.00

centers in peripheral villages of Burnpur

Repair/Construction of roads/Infrastructure

development in peripheral villages

Add Cost Index @13% on DSR 2023 For Civil &

Plumbing works and on DSR 2022 for E & M

Items for Asansol project site as per the latest 1,686,371.97 0

cost index published by CPWD vide circular

dated 26.12.2024

SubTotal Including GST :- (C) 14,682,354.05

Digitally signed by SUPARNA

Name of the project: Repair & Renovation of Peripheral market/Daily market of Burnpur

SAIL Work order no. 5200000177 dated 29.03.2025

Sl. No. DESCRIPTION UNIT Rate DSR Amount

Item code Quantity Amount (in

Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc., including

cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer, including

welding and bolted with special shaped washers etc.

10.16.1 Hot finished welded type tubes Kg 2640 194.4 513216

Providing and fixing precoated galvanised iron profile

sheets (size, shape and pitch of corrugation as

approved by Engineer-in-charge) 0.50 mm (+ 0.05 %)

total coated thickness with zinc coating 120 grams

per sqm as per IS: 277, in 240 mpa steel grade, 5-7

microns epoxy primer on both side of the sheet and

polyester top coat 15-18 microns. Sheet should have

protective guard film of 25 microns minimum to

avoid scratches during transportation and should be

supplied in single length upto 12 metre or as desired

by Engineer-in-charge. The sheet shall be fixed using

self drilling /self tapping screws of size (5.5x 55 mm)

with EPDM seal, complete upto any pitch in

horizontal/ vertical or curved surfaces, excluding the

cost of purlins, rafters and trusses and including

cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet

roofing accessories 0.50 mm (+0.05 %) total coated

thickness, Zinc coating 120 grams per sqm as per IS:

3 12.51 277, in 240 mpa steel grade, 5-7 microns epoxy

primer on both side of the sheet and polyester top

coat 15-18 microns using self drilling/ self tapping

screwscomplete :

Painting with synthetic enamel paint of approved

4 13.62 brand and manufacture of required colour to give an

Two or more coats on new work over an under coat

13.62.1 of suitable shade with ordinary paint of approved Sqm 176 226.25 39820

brand and manufacture

Providing and fixing on wall face unplasticised Rigid

PVC rain water pipes conforming to IS : 13592 Type

5 12.41 A, including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

12.41.2 110 mm diameter Metre 65 377.4 24531

Providing and fixing on wall face unplasticised - PVC

moulded fittings/accessories for unplasticised Rigid

6 12.42 PVC rain water pipes conforming to IS : 13592 Type

A, including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion.

12.42.1 Coupler

Providing and laying in position cement concrete of

7 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount

Item code Quantity Amount (in

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived

from natural sources : 3 graded stone aggregate 20

mm nominal size derived from natural sources)

Centering and shuttering including strutting,

propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass

Steel reinforcement for R.C.C. work including

9 5.22 straightening, cutting, bending, placing in position

and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D

Structural steel work riveted, bolted or welded in

built up sections, trusses and framed work, including

cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer all complete.

Demolishing cement concrete manually/ by

mechanical means including disposal of material

within 50 metres lead as per direction of Engineer - in

Nominal concrete 1:3:6 or richer mix (i/c equivalent

Demolishing brick work manually/ by

mechanical means including stacking of

12 15.7 serviceable material and disposal of

unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar Cum 20.00 2060.20 41204

Supplying and filling in plinth with sand under floors,

13 2.27 including watering, ramming, consolidating and Cum 15.00 2123.75 31856.25

dressing complete.

14 13.18 Neat cement punning Sqm 75.00 79.95 5996.25

Brick work with common burnt clay F.P.S. (non

15 6.1 modular) bricks of class designation 7.5 in foundation

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 32.515 7132.25 231905.1088

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, ISI : 12701 marked,

with cover and suitable locking arrangement and

16 18.48 making necessary holes for inlet, outlet and overflow Ltr. 1500 11 16500

pipes but without fittings and the base support for

tank. Circular tank

17.23 Providing and fixing white vitreous china flat back

17 or wall corner type lipped front urinal basin of each 5 1648.95 8244.75

430x260x350 mm or 340x410x265 mm sizes

17.75 Providing and fixing PTMT 15 mm Urinal spreader

18 size 95x69x100 mm with 1/2" BSP thread and Each 5 107.2 536

shapes, weighing not less than 60 gms.

17.76 Providing and fixing PTMT urinal cock of approved

quality and colour.

17.76.1 15 mm nominal bore, 80 mm long, 42 mm high and

30mm wide with BSP female threads weighing not Each 5 175.4 877

less than 48 gms

17.28 Providing and fixing P.V.C. waste pipe for urinal

including P.V.C. waste fittings complete.

17.28.2 Flexible pipe

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount

Item code Quantity Amount (in

8.10 Providing and fixing stone slab with table rubbed,

edges rounded and polished, of size 75x50 cm deep

and 1.8 cm thick, fixed in urinal partitions by

cutting a chase of appropriate width with chase

21 cutter and embedding the stone in the chase with

epoxy grout or with cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 6

mm nominal size) as per direction of Engineer-in-

charge and finished smooth.

8.10.2 Granite Stone of approved shade Sqm 6 4051.85 24311.1

18 mm cement plaster in two coats under layer 12

mm thick cement plaster 1:5 (1 cement : 5 coarse

sand) finished with a top layer 6 mm thick cement

plaster 1:6 (1 cement : 6 fine sand).

Distempering with 1st quality acrylic distemper

(ready mixed) having VOC content less than 50

gram/litre, of approved manufacturer and of required

shade and colour all complete to achieve even shade

New work (two or more coats) over and including

water thinnable priming coat with cement primer

having VOC content less than 50 gram/litre

Providing and fixing 1mm thick M.S. sheet door with

frame of 40x40x6 mm angle iron and 3 mm M.S.

gusset plates at the junctions and corners, all

necessary fittings complete, including applying a

priming coat of approved steel primer. Using M.S.

angels 40x40x6 mm for diagonal braces.

Disposal of building rubbish / malba / similar

unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting,

25 15.60 unloading to approved municipal dumping ground or Cum 50 263.95 13197.5

as approved by Engineer-in-charge, beyond 50 m

initial lead, for all leads including all lifts involved.

Earth work in surface excavation not exceeding 30 cm

in depth but exceeding 1.5 m in width as well as 10

26 2.10 sqm on plan including getting out and disposal of Sqm 150.00 129.85 19477.5

excavated earth upto 50 m and lift upto 1.5 m, as

directed by Engineer-in- Charge:

Providing and laying in position specified grade of

reinforced cement concrete,

excluding the cost of centering, shuttering, finishing

and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived

from natural sources : 3

graded stone aggregate 20 mm nominal size derived

from natural sources)

Providing and fixing Ist quality ceramic glazed wall

tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in

all colours, shades except burgundy, bottle green,

black of any size as approved by Engineer in-Charge,

in skirting, risers of steps and dados, over 12 mm

thick bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg

per sqm, including pointing in white cement mixed

with pigment of matching shade complete.

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount

Item code Quantity Amount (in

11.20 Chequerred precast cement concrete tiles 22 mm

thick in footpath &courtyard, jointed with neat

cement slurry mixed with pigment to match the shade

of tiles, including rubbing and cleaning etc. complete,

on 20mm thick bed of cement mortar 1:4 (1 cement:

4 coarse sand).

11.20.3 Dark shade pigment using ordinary cement. Sqm 12 1119.5 13434

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass

threaded fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of

Engineer in Charge.

Internal work - Exposed on wall

18.7.6 50mm nominal bore Metre 25 934.15 23353.75

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at

31 18.8 1.00 m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same

including testing of joints complete as per direction of

Engineer in Charge.

Concealed work, including cutting chases and making

good the walls etc.

18.8.1 15mm nominal bore Metre 5 497.8 2489

18.8.3 25mm nominal bore Metre 10 627.25 6272.5

Providing and fixing PTMT Ball cock of approved

32 18.62 quality, colour and make complete with Epoxy coated

aluminium rod with L.P./ H.P.H.D. plastic ball.

25 mm nominal bore, 152mm long, weighing not less

Providing and fixing ball valve (brass) of approved

33 18.18 quality, High or low pressure, with plastic floats

Providing and laying non-pressure NP2 class (light

duty) R.C.C. pipes with collars jointed with stiff

34 19.6 mixture of cement mortar in the proportion of 1:2 (1

cement : 2 fine sand) including testing of joints etc.

For storm water pipe

19.6.3 250 mm dia. R.C.C. pipe metre 6 899.8 5398.8

Providing and laying cement concrete 1:5:10 (1

cement : 5 coarse sand : 10 graded stone aggregate 40

mm nominal size) up to haunches of RCC. pipes

including bed concrete as per standard design :

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount

Item code Quantity Amount (in

Constructing brick masonry manhole in cement

mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top

slab with 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size),

foundation concrete 1:4:8 mix (1 cement : 4 coarse

sand : 8 graded stone aggregate 40 mm nominal size),

36 19.7 inside plastering 12 mm thick with cement mortar

1:3 (1 cement : 3 coarse sand) finished with floating

coat of neat cement and making channels in cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) finished with a

floating coat of neat cement complete as per standard

Inside size 90x80 cm and 45 cm deep including C.I.

cover with frame (light duty) 455x610 mm internal

dimensions,total weight of cover and frame to be not

less than 38 kg (weight of cover 23 kg and weight of

With common burnt clay F.P.S.(non modular) bricks

19.7.1.1 of class designation 7.5 Each 1.00 12770.55 12770.55

Steel work welded in built up sections/ framed work

including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer

using structural steel etc. as required

In gratings, frames, guard bar, ladder, railings,

brackets, gates and similar works.

Providing and fixing C.P. brass long body bib cock of

approved quality conforming to IS standards and

weighing not less than 690 gms.

15 mm nominal bore

Total Cost 7,162,936.06

Digitally signed by SUPARNA

Name of the project: Construction of Community centers with toilet and repairing/renovation of

community centers in peripheral villages of Burnpur

SAIL Work order no. 5200000177 dated 29.03.2025

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

COMMUNITY CENTRE WITH TOILETS

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as

10 sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as

directed by Engineer-in-charge.

i 2.6.1 All kinds of soils Cum 91.92 177.5 16315.8

Earth work in excavation by mechanical means

(Hydralic excavator/manual means)over areas

(exceeding 30cm in depth. 1.5m in width as well as

10 sqm on plan) including getting out and disposal of

excavated earth, lead upto 50m and lift upto 1.5m, as

directed by Engineer - in Charge

2.1 2.7.1 Ordinary rock Cum 5 498.9 2494.5

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

3 2.25 exceeding 20cm in depth, consolidating each Cum 89.0505 196 17453.898

deposited layer by ramming and watering, lead up to

50 m and lift upto 1.5 m.

Supplying and filling in plinth with sand under floors,

4 2.27 including watering, ramming, consolidating and Cum 10.976 2123.75 23310.28

dressing complete.

Sub total 59,574.48 0.00

C 4 CONCRETE WORKS

Providing and laying in position cement concrete of

1 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived

a 4.1.6 from natural sources : 6 graded stone aggregate 40 Cum 11.062 7178.75 79411.3325

mm nominal size derived from natural sources)

Making plinth protection 50mm thick of cement

concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) :

6 graded stone aggregate 20 mm nominal size) over

2 4.17 75mm thick bed of dry brick ballast 40 mm nominal Sqm 18.66 749.3 13981.938

size, well rammed and consolidated and grouted with

fine sand, including necessary excavation, levelling &

dressing & finishing the top smooth.

Sub total 93,393.27 0.00

D 5 REINFORCED CEMENT CONCRETE WORK

Centering and shuttering including strutting,

propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass

Suspended floors, roofs, landings, balconies and

access platform.

Lintels, beams, plinth beams, girders, bressumers and

f 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 36.726 961.3 35304.7038

k 5.9.19 Weather shade, Chajjas, corbels etc., including edges. Sqm 5.22 951.1 4964.742

Steel reinforcement for R.C.C. work including

2 5.22 straightening, cutting, bending, placing in position

and binding all complete upto plinth level.

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

Thermo-Mechanically Treated bars of grade Fe-500D

Steel reinforcement for R.C.C. work including

3 5.22A straightening, cutting, bending, placing in position

and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D

Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and

fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag

cement, admixtures in recommended proportions as

per IS: 9103 to accelerate / retard setting of concrete,

to improve durability and workability without

impairing strength; including pumping of concrete to

4 5.33.1 site of laying, curing, carriage for all leads; but

excluding the cost of centering, shuttering, finishing

and reinforcement as per direction of the engineer-in-

charge; for the following grades of concrete. Note:

Extra cement up to 10% of the minimum specified

cement content in design mix shall be payable

separately. In case the cement content in design mix

is more than 110% of the specified minimum cement

content, the contractor shall have discretion to either

re-design the mix or bear the cost of extra cement.

a) 5.33.1 All works upto plinth level.

Concrete of M25 grade with minimum cement

content of 330 kg /cum

b) 5.33.2 All works above plinth level upto floor V level.

Concrete of M25 grade with minimum cement

content of 330 kg /cum

E 6 BRICK WORK

Brick work with common burnt clay F.P.S. (non

1 6.1 modular) bricks of class designation 7.5 in foundation

i 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 21.279675 7132.25 151771.962

Brick work with non modular fly ash bricks

conforming to IS:12894,class designation 10 average

compressive strength in super structure above plinth

level up to floor V level in :

i 6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand) Cum 26.56125 8752.55 232478.6687

G 9 WOOD, WPC & uPVC WORK

Providing and fixing ISi marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type,

core of block board construction with frame of 1st

class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and

face veneers on both faces of shutters:

30mm thick including ISi marked Stainless Steel butt

hinges with necessary screws

Providing and fixing M.S. grills of required pattern in

frames of windows etc. with M.S. flats, square or

2 9.48.2 round bars etc. including priming coat with approved Kg 172.19 238.35 41042.32073

steel primer all complete.Fixed to openings /wooden

frames with rawl plugs screws etc.

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

Providing and fixing aluminium extruded section

body tubular type universal hydraulic door closer

(having brand logo with ISI, IS : 3564, embossed on

3 9.84 the body, door weight upto 36 kg to 80 kg and door Each 1 983.15 983.15

width from 701 mm to 1000 mm), with double speed

adjustment with necessary accessories

and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI

marked anodised anodic coating not less than grade

4 9.96 AC 10 as per IS : 1868), transparent or dyed to

required colour or shade, with nuts and screws etc.

Providing and fixing aluminium tower bolts ISI

marked anodised ( anodic coating not less than grade

5 9.97 AC 10 as per IS: 1868) transparent or dyed to

required colour or shade with nuts and screws etc.

Providing and fixing aluminium handles ISI marked

anodised ( anodic coating not less than grade AC 10

as per IS: 1868) transparent or dyed to required

colour or shade with nuts and screws etc. complete-

Providing and fixing aluminium hanging floor door

stopper, l5l marked, anodised (anodic coatinS not less

7 9.101.2 than grade AC 10 as per 15 : 1868) transparent or Each 1 72.35 72.35

dyed to required colour and shade, with necessary

screws etc. complete. Twin rubber stopper

Sub total 48,440.61 0.00

H 10 STEEL WORK

Providing and fixing pressed steel door frames

conforming to IS: 4351, manufactured from

commercial mild steel sheet of 1.60 mm thickness,

including hinges, jamb, lock jamb, bead and if

required angle threshold of mild steel angle of

section 50x25 mm, or base ties of 1.60 mm, pressed

mild steel welded or rigidly fixed together by

mechanical means, including M.S. pressed butt

hinges 2.5 mm thick with mortar guards, lock strike

plate and shock absorbers as specified and applying a

coat of approved steel primer after pre-treatment of

the surface as directed by Engineer in-charge: Profile

B Fixing with adjustable lugs with split end tail to

Providing and fixing circular/ Hexagonal cast iron or

M.S. sheet box for ceiling fan clamp, of internal dia

140 mm, 73 mm height, top lid of 1.5 mm thick M.S.

sheet with its top surface hacked for proper bonding,

2 10.18 top lid shall be screwed into the cast iron/ M.S. sheet Each 2 220.65 441.3

box by means of 3.3 mm dia round headed screws,

one lock at the corners. Clamp shall be made of 12

mm dia M.S. bar bent to shape as per standard

Sub total 441.30 0.00

I 11 FLOORING WORK

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

Providing and fixing Ist quality ceramic glazed wall

tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in

all colours, shades except burgundy, bottle green,

black of any size as approved by Engineer-in-Charge,

in skirting, risers of steps and dados, over 12 mm

thick bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg

per sqm, including pointing in white cement mixed

with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size

300x300 mm (thickness to be specified by the

manufacturer) of 1st quality conforming to IS : 15622

of approved make in colours such as White, Ivory,

Fume Red Brown, laid on 20 mm thick cement mortar

1 :4 (1 Cement : 4 Coarse sand), Jointing with grey

cement slurry @ 3.3 kg/sqm including pointing the

joints with white cement and matching pigment etc.,

Kota stone slab flooring over 20 mm (average) thick

base laid over and jointed with grey cement slurry

3 11.26 mixed with pigment to match the shade of the slab,

including rubbing and polishing complete with base

of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps,

skirting, dado and pillars laid on 12 mm (average)

thick cement mortar 1:3 (1 cement: 3 coarse sand)

and jointed with grey cement slurry mixed with

pigment to match the shade of the slabs, including

rubbing and polishing complete.

Providing and fixing on wall face unplasticised Rigid

PVC rain water pipes conforming to IS : 13592 Type

1 12.41 A, including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC

moulded fittings/ accessories for unplasticised Rigid

2 12.42 PVC rain water pipes conforming to IS : 13592 Type A

including jointing with seal ring conforming to IS :

5382 leaving 10 mm gap for thermal expansion.

12.42.5 Bend 87.5 Deg

3 12.42.6 Shoe (Plain)

Providing and fixing to the inlet mouth of rain water

4 12.44 pipe cast iron grating 15 cm diameter and weighing Each 2 54.7 109.4

not less than 440 grams.

Providing and fixing unplasticised -PVC pipe clips of

approved design to unplasticised - PVC rain water

pipes by means of 50x50x50 mm hard wood plugs,

5 12.43 screwed with M.S. screws of required length,

including cutting brick work and fixing in cement

mortar 1:4 (1 cement : 4 coarse sand) and making

good the wall etc. complete.

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

Making khurras 45x45 cm with average minimum

thickness of 5 cm cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate of 20 mm

nominal size) over P.V.C. sheet 1 m x1 m x 400

micron, finished with 12 mm cement plaster 1:3 (1

cement : 3 coarse sand) and a coat of neat cement,

rounding the edges and making and finishing the

outlet complete.

Sub total 20,666.14 0.00

K 13 FINISHING WORK

1 13.4 12 mm cement plaster of mix :

18 mm cement plaster in two coats under layer 12

mm thick cement plaster 1:5 (1 cement : 5 coarse

sand) finished with a top layer 6 mm thick cement

plaster 1:6 (1 cement : 6 fine sand).

3 13.16 6 mm cement plaster of mix :

Extra for providing and mixing water proofing 50KG

4 13.21 material in cement plaster work in proportion Cement 0 22.1 0

recommended by the manufacturers. Used in

Distempering with 1st quality acrylic distemper

(ready mixed) having VOC content less than 50

gram/litre, of approved manufacturer and of

required shade and colour all complete to achieve

New work (two or more coats) over and including

thinnable priming coat with cement primer having

VOC content less than 50 gram/litre

Finishing walls with Premium Acrylic Smooth

6 13.47 exterior paint with Silicone additives of required

New work (Two or more coats applied @ 1.43 ltr/10

over and including priming coat of exterior primer

applied @ 2.20 kg/10 sqm)

7 13.5 Applying priming coat :

With ready mixed red oxide zinc chromate primer of

ii 13.50.3 approved brand and manufacture on steel galvanised Sqm 10.296 67.4 693.9504

iron/ steel works

Painting with synthetic enamel paint of approved

8 13.62 brand and manufacture of required colour to give an

Two or more coats on new work over an under coat

i 13.62.1 of suitable shade with ordinary paint of approved Sqm 10.458 226.25 2366.1225

brand and manufacture

L 21 ALUMINIUM WORK

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with extruded

built up standard tubular sections/appropriate Z

sections and other sections of approved make

conforming to IS: 733 and IS : 1285, fixed with rawl

plugs and screws or with fixing clips, or with

expansion hold fasteners including necessary filling

up of gaps at junctions, at top, bottom and sides with

required PVC/neoprene felt etc. Aluminium sections

shall be smooth, rust free, straight, mitred and jointed

echanically wherever required including cleat angle,

Aluminium snap beading for glazing / paneling, C.P.

brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-

in-charge. Glazing and paneling to be paid for

For shutters of doors, windows & ventilators

providing and fixing hinges/ pivots and making

b 21.1.2 provision

for fixing of fittings wherever required including the

cost of EPDM rubber / neoprene gasket required

(Fittings shall be paid for separately)

Powder coated aluminium (minimum

thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door,

window, ventilator shuttersand partitions etc. with

EPDM rubber / neoprene gasket etc. complete as per

2 21.3 the architectural drawings and the directions of

engineer-in-charge .

(Cost of aluminium snap beading shall be paid in

With float glass panes of 4.0 mm thickness (weight

Providing and fixing fly proof stainless steel grade

304 wire gauge, to windows and clerestory windows

3 9.135 using wire gauge with average width of aperture 1.4

mm in both directions with wire of dia. 0.50 mm all

9.135.2 With 12 mm mild steel U beading Sqm 0.85 1228.00 1043.8

Sub total 48,572.40 0.00

M 22 WATER PROOFING

Grading roof for water proofing treatment with.

1 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 Cum 3 8042.3 24126.9

graded stone aggregate 20 mm nominal size)

2 13.18 Neat cement punning Sqm 35 79.95 2798.25

Sub total 26925.15 0

Providing and fixing factory made uPVC door frame

made of uPVC extruded sections having an overall

dimension as below (tolerance ±1mm), with wall

thickness 2.0 mm (± 0.2 mm), corners of the door

frame to be Jointed with galvanized brackets and

stainless steel screws, joints mitred and Plastic

welded. The hinge side vertical of the frames

reinforced by galvanized M.S. tube of size 19 X 19 mm

and 1mm (± 0.1 mm) wall thickness and 3 nos.

stainless steel hinges fixed to the frame complete as

per manufacturer’s specification and direction of

Engineer- in-charge

9.117.1 Extruded section profile size 48x40 mm Metre 5 270.2 1351

2 9.118 Providing and fixing to existing door frames.

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

30 mm thick factory made Polyvinyl Chloride (PVC)

door shutter made of styles and rails of a PVC hollow

section of size 60x30 mm and wall thickness 2 mm

(± 0.2 mm), with inbuilt decorative moulding edging

on one side. The styles and rails mitred and joint at

the corners by means of M.S. galvanised/ plastic

brackets of size 75x220 mm having wall thickness 1.0

mm and stainless steel screws. The styles of the

shutter reinforced by inserting galvanised M.S. tube

of size 25x20 mm and 1 mm (± 0.1 mm) wall

thickness. The lock rail made up of 'H' section, a PVC

hollow section of size 100x30 mm and 2 mm (± 0.2

mm) wall thickness fixed to the shutter styles by

means of plastic/ galvanised M.S. 'U' cleats. The

shutter frame filled with a PVC multi-chambered

single panel of size not less than 620 mm, having over

all thickness of 20 mm and 1 mm (± 0.1 mm)Sub walltotal 6,882.46 -

sub total of civil works of Community centre 1,778,113.48 0.00

PLUMBING AND SANITARY WORKS

A) SANITARY INSTALLATION

Providing and fixing water closet squatting pan

(Indian type W.C. pan ) with 100 mm sand cast Iron P

or S trap, 10 litre low level white P.V.C. flushing

1 17.1 cistern, including flush pipe, with manually controlled

device (handle lever) conforming to IS : 7231, with all

fittings and fixtures complete, including cutting and

making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size

580x440 mm with integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15

mm C.P. brass pillar taps, 32 mm C.P. brass waste of

2 17.7 standard pattern, including painting of fittings and

brackets, cutting and making good the walls

wherever require :

White Vitreous China Flat back wash basin size

550x400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing 600x450 mm beveled edge

mirror of superior glass (of approved quality)

3 17.31 complete with 6 mm thick hard board ground fixed to Each 1 1607.95 1607.95

wooden cleats with C.P. brass screws and washers

Providing and fixing P.V.C. waste pipe for sink or

wash basin including P.V.C. waste fittings complete.

17.28.1 Flexible pipe

Providing and fixing C.P. brass long body bib cock of

approved quality conforming to IS standards and

weighing not less than 690 gms.

18.51.1 15 mm nominal bore Each 1 798.95 798.95

Providing and fixing C.P. brass angle valve for basin

mixer and geyser points of approved quality

conforming to IS:8931 15mm nominal bore

Sub total of sanitary installation 12,321.65 0.00

B) WATER SUPPLY

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at

1 18.8 1.00 m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same

including testing of joints complete as per direction

of Engineer in Charge.

Concealed work, including cutting chases and making

good the walls etc.

18.8.1 15mm nominal bore Mtr. 5 497.8 2489

18.8.2 20mm nominal bore Mtr. 12 537.6 6451.2

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass

threaded fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of

Engineer in Charge.

Internal work - Exposed on wall

18.7.5 40mm nominal bore Mtr. 30 702.95 21088.5

Providing and fixing brass/bronze lever operated ball

valve of full flow with stainless steel ball (AISI 304

3 MR and spindle AISI 410) with setting and gland of

superior quality having minimum working pressure

15 mm nominal bore Each 1 927 927

Providing and fixing ball valve (brass) of approved

4 18.18 quality, High or low pressure, with plastic floats

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, ISI : 12701 marked,

with cover and suitable locking arrangement and

5 18.48 making necessary holes for inlet, outlet and overflow Ltr. 500 11 5500

pipes but without fittings and the base support for

tank. Circular tank

Sub total of water supply works 35,991.20 927.00

Sub total of sanitary and plumbing works 48,312.85 927.00

Electrical works of community centre

A. DSR- 2022 SCHEDULE ITEMS (DSR-2022) (PART-A)

Point Wiring in Medium Class PVC Conduit, with

Modular type Switch: Wiring for light point/ fan

point/ exhaust fan point/ call bell point with 1.5

sq.mm FR PVC insulated copper conductor single

core cable in surface/recessed Medium Class PVC

conduit, with modular type switch, modular plate,

1 D.S.R 1.10 suitable size of GI box and earthing the point with 1.5

sq.mm. FR PVC insulated copper conductor single

core cable etc as required. Make FRLS PVC CU Wire::-

Havells, Polycab, Rajnigandha, RR Cable. (Make of

Modular switch Sockets:- Havells (ATHENA), L&T

ENGLAZE), Legrand (LYNCUS) , Anchor(WOODS),

Schneider-(OPEL)

Wiring for light/power plug with 2x4 Sq.mm FR PVC

insulated copper conductor single core cable in

surface/recessed Medium Class PVC conduit along

2 D.S.R 1.12 with 1 No. 4 Sq.mm FR PVC insulated copper Mtr. 30 334 10020

conductor single core cable for loop earthing etc. as

required.Make:- Havells, Polycab, Rajnigandha, RR

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FR PVC insulated

3 D.S.R 1.14 copper condcutor, single core cable in surface/

recessed Medium Class PVC conduit as required.

Make:- Havells, Polycab, Rajnigandha, RR Cable.

1.14.1 2 X 1.5 sq.mm + 1 X 1.5 sq.mm earth wire Mtr. 10 233 2330

Supplying and fixing of following switch/ socket on

4 D.S.R. 1.24 the existing modular plate & switch box including

connections but excluding modular plate etc. as reqd.

1.24.1 5/6 amps switch Each 3 103 309

1.24.4 3 pin 5/6A socket outlet Each 3 122 366

Supplying and fixing Stepped type electronic fan

regulator on the existing modular plate & switch box

including connections but excluding modular plate

Supplying and fixing modular blanking plate on the

6 D.S.R. 1.26 existing modular plate & switch box excluding Each 2 40 80

modular plate as required.

Supplying and fixing suitable size GI box with

modular plate and cover in front on surface or in

recess including providing and fixing 3 pin 5/6 Amp

modular socket outlet and 5/6 A modular type

switch, connections painting etc. as reqd. (for Light

Supplying and fixing suitable size GI box with

modular plate and cover in front on surface or in

recess including providing and fixing 6 pin 5/6 &

15/16 Amp modular socket outlet and 15/16 A

modular type switch, connections painting etc. as

Supplying & fixing of 3 pin, 5 amp Ceiling rose on the

9 D.S.R. 1.33 existing junction box/ wooden block including Each 5 87 435

connection as required.

Supplying and fixing brass batten/angle holder

including connection etc. as required.

Installation, testing and commissioning of pre-wired,

fluorescent fitting/ compact fluorescent fitting of all

types, complete with all accessories and tube/lamp

11 D.S.R. 1.41 etc. directly on ceiling /wall including connections Each 3 206 618

with 1,5 Sq mm FRLS PVC insulated copper

conductor, single core cable and earthing etc. as

Installation, testing and commissioning of Ceiling

Fans, including wiring the down rods of standard

12 D.S.R. 1.44 length (up to 30cm) with 1.5 Sq mm FRLS PVC Each 2 213 426

insulated copper conductor, single core cable and

earthing etc. as required.

Supplying and fixing following way, horizontal type

thee pole & neutral, sheet steel, MCCB distribution

board, 415V, on surface/ recces , complete with

tinned copper bus bar, neutral bar, earth bar, din bar

interconnections, powder painted including earthing

etc. as required (But without MCCB/RCCB/Isolator)

Make:-SIEMENS-Bitaguard, LEGRAND-Ekinox³-,

SCHNEIDER-ACTI-9, L&T-AU

2.4.2 6 way (4+18) Double door Each 1 4091 4091

Supplying & fixing 5 amps to 32 amps rating 240/415

volts 10 kA, C curve Miniature Circuit Breaker

suitable for inductive loads of following poles in the

14 D.S.R 2.10 existing MCB DB complete with connections, testing

and commissioning etc. as required. (Make:-

LEGRAND- DX³/SCHNEIDER- ACTI-9/SIEMENS-

BETA GUARD/ L&T- AU VERSION.)

2.10.1 Single Pole Each 2 256 512

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Supplying & fixing following rating double pole

(Single Phase & Neutral) 240 V, Resudual Curren

Circuit Breaker (RCCB) , having a sensitivity current

16 D.S.R 2.14 uo to 300mA in the existing MCB DB complete with

connections, testing and commissioning etc. as

required. Make:-LEGRAND- DX³/SCHNEIDER- ACTI-

9/SIEMENS- BETA GUARD/ L&T- AU VERSION.

Providing & fixing of M.V. danger notice plate of 200

mm x 150 mm, made of mild steel, at least 2 mm

17 D.S.R 2.21 thick, and vitreous enamelled white on both sides, Each 1 269 269

and with inscription in single red colour on front side

EARTHING SYSTEM

Earthing with G.I. Earth Pipe 4.5 Meter long , 40mm

dia including accessories, and providing massonry

i) 5.2 enclosure with cover plate having locking arragement Each 1 5368 5368

and watering pipe etc. with charcoal/cock and salt as

Supplying and laying 25 mm X 5 mm GI strip at 0.50

meter below ground/surface as strip earth electrode,

including connection/ terminating with nut, bolt,

spring, washer etc. as required (Jointing shall be done

by overlapping and with 2 sets of G.I. nut bolt &

spring washer spaced at 50 mm)

TOTAL OF SCHEDULE ITEMS-(DSR-2022) (PART-A) 53,125.00 0.00

NON SCHEDULE ITEMS (PART-B) (ELECTRICAL)

1 MR LED LUMINAIRES LIGHTS

Note:- All LED Light fittings LM 79 and LM 80 reports

need to be submitted with all accessories. Samples of

alltype LED light fixtures are to be submitted to the

Engineering Incharge and each LED Light should

have 100lm/W for the approval prior to

procurement of light fixtures. Make Havels, Bajaj,

Philips Jaquar. Make 0f LED

Chip_Philips/Osram/Cree/Nichia.

Supply of 9W/10W LED Bulb (Luminous Flux- 600lm,

CCT-6500K (Cool W 9/10 watt LED Bulb, B22, 6500

Khite), CRI-80, Rated Voltage- 220V/ 240V. Beam

Angle- 120 degree.

Supply of 20 watt LED tube light fitting, 4 feet, IP20,

iii) Each 1 757 757

6500K, Polycarbonate Body, 100 Lumen / Watt.

Supply of 40 watt, 4 feet, IP20 Surface / Suspension

iv) mounting, Extruded Aluminum housing with Lumen Each 4 2446 9784

output of 4800. THD.

2 MR FANS & EXHAUST FANS

All Ceiling Fans shall be of I.S.I. Brand and of

minimum 2 years of Warranty and CFM should not

be less than 300. Samples of all Fans are to be

submitted to the Engineer-in- charge for the approval

prior to procurement of Fans. Make:- Usha, Bajaj,

Havells, Crompton.

Supply of regular /standard model A.C ceilling fan of

1200 mm sweep with double ball bearing, down road,

i) 2 nos. canopies including wiring the down rods of Each 2 1986 3972

standard length (upto 30 cm ) with 1.5 sq. mm FR

PVC insulated copper conductor etc.as required.

Supply, fitting fixing and testing of 63A FP/10kA, C

Series MCB .(Make:-MCB-LEGRAND-

DX³/SCHNEIDER- ACTI-9/SIEMENS- BETA GUARD/

L&T- AU VERSION.)

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

Supply of following size of 1.1KV XLPE / PVC

Insulated / PVC sheathed (Heavy Duty) armoured

electric cable with aluminium conductor as per IS

7098 (Part-1) 1988 with upto date Amendments.

Make:- As per approved Make List (Make:- Havell’s,

Polycab, RPG, RR Kabel, KEI)

Supply of 4 Core 15 Sq. mm. XLPE PVC Al. / Ar. Cable

TOTAL OF NON SCHEDULE ITEMS (PART-B) 0.00 22,963.00

Sub total of electrical works of community centre 53,125.00 22,963.00

Sub total of construction of 1 nos. community

centre with toilet, septic tank and soak pit

Total of Community centre with toilet (A) 1,903,441.33

Repairing/renovation of

community centers in peripheral villages of

Demolishing R.C.C. work manually/ by mechanical

means including stacking of steel bars and disposal of

unserviceable material within 50 metres lead as per

direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical

means including stacking of serviceable material and

2 15.7.4 disposal of unserviceable material within 50 metres Cum 50.00 2060.20 103,010

lead as per direction of Engineer-in-charge. In cement

Dismantling doors, windows and clerestory windows

(steel or wood) shutter including chowkhats,

architrave, holdfasts etc. complete and stacking

within 50 metres lead :

15.12.1 Of area 3 sq. metres and below Each 8.00 367.20 2,938

15.12.2 Of area beyond 3 sq. metres Each 8.00 502.75 4,022

Taking out doors, windows and clerestory window

4 15.13 shutters (steel or wood) including stacking within 50

15.13.1 Of area 3 sq. metres and below Each 8.00 143.50 1,148

15.13.2 Of area beyond 3 sq. metres Each 8.00 188.90 1,511

Dismantling tile work in floors and roofs laid in

5 15.23 cement mortar including stacking material within 50

15.23.2 For thickness of tiles above 25 mm and up to 40 mm Sqm 15.00 113.35 1,700

Disposal of building rubbish / malba / similar

unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting,

unloading to approved municipal dumping ground or

as approved by Engineer-in-charge, beyond 50 m

initial lead, for all leads including all lifts involved.

Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level : 1 :3:6 (1

Cement : 3 coarse sand (zone-Ill) derived from

natural sources : 6 graded stone aggregate 20 mm

nominal size derived from natural sources)

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and

fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag

cement, admixtures in recommended proportions as

per IS: 9103 to accelerate / retard setting of concrete,

to improve durability and workability without

impairing strength; including pumping of concrete to

site of laying, curing, carriage for all leads; but

excluding the cost of centering, shuttering, finishing

and reinforcement as per direction of the engineer-in-

charge; for the following grades of concrete. Note:

Extra cement up to 10% of the minimum specified

cement content in design mix shall be payable

separately. In case the cement content in design mix

is more than 110% of the specified minimum cement

content, the contractor shall have discretion to either

re-design the mix or bear the cost of extra cement All

works above plinth level upto floor V level.

Concrete of M25 grade with minimum cement

content of 330 kg /cum

Lintels, beams, plinth beams, girders, bressumers and

cantilevers with water proof ply 12 mm thick

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position

and binding all complete above plinth level. Thermo-

Mechanically Treated bars of grade Fe-500D or more.

Brick work with non modular fly ash bricks

conforming to IS:12894, class designation 10 average

11 6.34.2 compressive strength in super structure above plinth Cum 62.50 8752.55 547,034

level up to floor V level in :

Cement mortar 1:6 (1 cement : 6 Coarse sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6

18 mm cement plaster in two coats under layer 12

mm thick cement plaster 1:5 (1 cement : 5 coarse

sand) finished with a top layer 6 mm thick cement

plaster 1:6 (1 cement : 6 fine sand).

14 13.16 6 mm cement plaster of mix :

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with extruded

built up standard tubular sections/appropriate Z

sections and other sections of approved make

conforming to IS: 733 and IS : 1285, fixed with rawl

plugs and screws or with fixing clips, or with

expansion hold fasteners including necessary filling

up of gaps at junctions, at top, bottom and sides with

required PVC/neoprene felt etc. Aluminium sections

shall be smooth, rust free, straight, mitred and jointed

echanically wherever required including cleat angle,

Aluminium snap beading for glazing / paneling, C.P.

brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-

in-charge. Glazing and paneling to be paid for

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

For shutters of doors, windows & ventilators

including providing and fixing hinges/ pivots and

making provision for fixing of fittings wherever

required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be

paid for separately)

Powder coated aluminium (minimum

thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door,

window, ventilator shutters and partitions etc. with

EPDM rubber / neoprene gasket etc. complete as per

16 21.3 the architectural drawings and the directions of

engineer-in-charge .

(Cost of aluminium snap beading shall be paid in

With float glass panes of 4.0 mm thickness (weight

not less than 10kg/sqm)

Distempering with 1st quality acrylic distemper

(ready mixed) having VOC content less than 50

gram/litre, of approved manufacturer and of

required shade and colour all complete to achieve

17 13.41.1 even shade and colour : Sqm 641.00 185.65 119,002

New work (two or more coats) over and including

thinnable priming coat with cement primer having

VOC content less than 50 gram/litre

Finishing walls with Premium Acrylic Smooth

18 13.47 exterior paint with Silicone additives of required

New work (Two or more coats applied @ 1.43 ltr/10

i 13.47.1 sqm over and including priming coat of exterior Sqm 483.00 171.10 82,641

primer applied @ 2.20 kg/10 sqm)

19 13.50 Applying priming coat :

With ready mixed red oxide zinc chromate primer of

ii 13.50.3 approved brand and manufacture on steel galvanised Sqm 33.82 67.40 2,279

iron/ steel works

Painting with synthetic enamel paint of approved

20 13.62 brand and manufacture of required colour to give an

Two or more coats on new work over an under coat

13.62.1 of suitable shade with ordinary paint of approved Sqm 35.50 226.25 8,032

brand and manufacture

Providing and fixing fly proof stainless steel grade

304 wire gauge, to windows and clerestory windows

21 9.135 using wire gauge with average width of aperture 1.4

mm in both directions with wire of dia. 0.50 mm all

9.135.2 With 12 mm mild steel U beading Sqm 10.00 1228.00 12,280

Providing and fixing factory made uPVC door frame

made of uPVC extruded sections having an overall

dimension as below (tolerance ±1mm), with wall

thickness 2.0 mm (± 0.2 mm), corners of the door

frame to be Jointed with galvanized brackets and

stainless steel screws, joints mitred and Plastic

welded. The hinge side vertical of the frames

reinforced by galvanized M.S. tube of size 19 X 19 mm

and 1mm (± 0.1 mm) wall thickness and 3 nos.

stainless steel hinges fixed to the frame complete as

per manufacturer’s specification and direction of

Engineer- in-charge

9.117.1 Extruded section profile size 48x40 mm Metre 14.85 270.2 4,012

23 9.118 Providing and fixing to existing door frames.

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

30 mm thick factory made Polyvinyl Chloride (PVC)

door shutter made of styles and rails of a PVC hollow

section of size 60x30 mm and wall thickness 2 mm

(± 0.2 mm), with inbuilt decorative moulding edging

on one side. The styles and rails mitred and joint at

the corners by means of M.S. galvanised/ plastic

brackets of size 75x220 mm having wall thickness 1.0

mm and stainless steel screws. The styles of the

shutter reinforced by inserting galvanised M.S. tube

of size 25x20 mm and 1 mm (± 0.1 mm) wall

thickness. The lock rail made up of 'H' section, a PVC

hollow section of size 100x30 mm and 2 mm (± 0.2

mm) wall thickness fixed to the shutter styles by

means of plastic/ galvanised M.S. 'U' cleats. The

shutter frame filled with a PVC multi-chambered

single panel of size not less than 620 mm, having over

all thickness of 20 mm and 1 mm (± 0.1 mm) wall

thickness . The panels filled vertically and tie bar at

two places by inserting horizontally 6 mm galvanised

M.S. rod and fastened with nuts and washers,

complete as per manufacturer's specification and

direction of Engineer-in-charge.

Grading roof for water proofing treatment with.

24 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 Cum 10.00 8042.30 80,423

graded stone aggregate 20 mm nominal size)

Providing and fixing C.P. brass long body bib cock of

approved quality conforming to IS standards and

weighing not less than 690 gms.

18.51.1 15 mm nominal bore Each 4.00 798.95 3,196

Providing and fixing C.P. brass angle valve for basin

mixer and geyser points of approved quality

conforming to IS:8931 15mm nominal bore

Providing and fixing white vitreous china pedestal

type water closet (European type W.C. pan) with

seat and lid, 10 litre low level white P.V.C. flushing

cistern, including flush pipe, with manually controlled

device (handle lever), conforming to IS : 7231, with

all fittings and fixtures complete, including cutting

and making good the walls and floors wherever

W.C. pan with ISI marked white solid plastic seat and

Providing and fixing 8mm dia C.P./S.S. Jet with

flexible tube upto 1 meter long with S.S. Triangular

plate to european type W.C. Of approved quality and

make as approved by engineer in charge.

Supply of 15 watt, IP20 led surface mounted down

v) light with 100 lumen / watt, 5700K, round with Each 6.00 2388.00 14,328

Aluminum housing.

Supply of 230V AC Exhaust Fan (230mm- 1400 RPM),

ii) double ball bearing (Metal Body- Light Duty) exhaust Each 3.00 1704.00 5,112

fan as required.

Digitally signed by SUPARNA

Sl. No. DESCRIPTION UNIT Rate DSR Amount NDSR Amount (in

Item code Quantity

Providing and fixing M.S. grills of required pattern in

frames of windows etc. with M.S. flats, square or

29 9.48.2 round bars etc. including priming coat with approved Kg 800.00 238.35 190,680

steel primer all complete.Fixed to openings /wooden

frames with rawl plugs screws etc.

Repairs to plaster of thickness 12 mm to 20 mm in

patches of area 2.5 sq.meters and under, including

cutting the patch in proper shape, raking out joints

30 14.1 and preparing and plastering the surface of the walls

complete, including disposal of rubbish to the

dumping ground, all complete as per direction of

Engineer in-Charge.

14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) Sqm 500.00 560.50 280,250

Demolishing cement concrete manually/ by

mechanical means including disposal of material

within 50 metres lead as per direction of Engineer -

Nominal concrete 1:3:6 or richer mix (i/c equivalent

Half brick masonry with non modular fly ash bricks

32 6.45 of class designatio 10, conformingio IS :12894, in

super structure above plinth and upto floor V level.

6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 25.00 1105.80 27,645

Extra for providing and placing in position 2 Nos

33 6.15 6mm dia. M.S. bars at every third course of half brick Sqm 25.00 104.80 2,620

Providing and fixing 1mm thick M.S. sheet door with

frame of 40x40x6 mm angle iron and 3 mm M.S.

gusset plates at the junctions and corners, all

necessary fittings complete, including applying a

priming coat of approved steel primer. Using M.S.

angels 40x40x6 mm for diagonal braces.

Sub total 2,263,805 0

Sub total of repairing and renovation works (B) 2,263,805

Total of new construction and

repairing/renovation works (A+B)

Digitally signed by SUPARNA

Name of the project: Repair/Construction of roads/Infrastructure development in peripheral villages

SAIL Work order no. 5200000177 dated 29.03.2025

Sl. No. DESCRIPTION UNIT Rate DSR Amount

Item code Quantity Amount (in

Construction of granular sub-base by providing close

graded Material conforming to specifications, mixing

in a mechanical mix plant at OMC, carriage of mixed

material by tippers to work site, for all leads & lifts,

1 16.78 spreading in uniform layers of specified thickness

with motor grader on prepared surface and

compacting with vibratory power roller to achieve

the desired density, complete as per specifications

and directions of Engineer-in-Charge

With material conforming to Grade-II (size range 53

mm to 0.075 mm ) having CBR Value-25

Centering and shuttering including strutting,

propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass

Excavating, supplying and filling of local earth

(including royalty) by mechanical transport upto a

3 2.25 (a) lead of 5km also including ramming and watering of Cum 83.6875 700.50 58,623.09

the earth in layers not exceeding 20 cm in trenches,

plinth, sides of foundation etc. complete

Providing and laying in position cement concrete of

4 4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived

4.1.2 from natural sources : 3 graded stone aggregate 20 Cum 150.6375 8340.85 1,256,444.79

mm nominal size derived from natural sources)

Sub total 1,665,799.66 0

Digitally signed by SUPARNA