Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
23 Mar 2026, 4:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER
14 conditions · 2 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022 and ACS No.1 dt 14.07.22: The tenderer must have minimum average annual contractual turnover of 'V/N' Or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: as per Clause 10.1 of Part-I of IRSGCC-2022 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. Note for Item 10.1 of IRSGCC-2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar nature of work: "An OFC or OFC & Quad or Quad cable work, which involves laying and jointing of OFC cables/Quad cables." (As per CSTE/Plg/SC lr no. SG. 36.I.PC.Vol.6 dt: 01.03.2007).
20 conditions · 7 needing a document upload
(1) Tenderers should attach self-attested copy of PAN and GST Registration Certificate & Photo identification in support of their Identity. (2) The documents attached to the tender should be clear and legible for evaluation of tender. Proper care to be taken in this regard.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
When work is tendered for by a firm or company of contractors, the tender shall be digitally signed by the individual legally authorized to enter into commitments on their behalf duly furnishing Power of Attorney in the name of bidder invariably (POA to be enclosed).
As per conditions mentioned in the Tender document.
Latest GCC and its Amendments/Advanced Correction slips from time to time will be applicable.
Telecom arrangements in connection with commissioning of exchanges over Guntur division.
GNT-SG-36-370
GNT-SG-36-370
Open
Works - General
12 Months
Guntur, Andhra Pradesh
₹0
₹2.2 L
23 Mar 2026
27 Feb 2026
9 Mar 2026
100 items across 5 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 60,21,778 | ||
| — | 400.00 | — | — | ||
| Supply of Push button corded auto telephone with Caller ID facility of Beetel, Panasonic or Binatone make. (INSPECTION BY CONSIGNEE). | — | — | — | 5,98,000 | |
| — | 10000.00 | — | — | ||
| Supply of Switch board cable 10 Pair / 0.6mm dia. as per TEC 68080:2002 or latest. (INSPECTION BY CONSIGNEE) | — | — | — | 3,50,000 | |
| — | 20000.00 | — | — | ||
| Supply of Switch board cable 20 Pair / 0.6mm dia. as per TEC 68080:2002 or latest GR WIR 0603 March 2002 or Latest (INSPECTION BY CONSIGNEE) | — | — | — | 17,60,000 | |
| — | 9150.00 | — | — | ||
| Supply of UTP CAT 6 Cable (Rolls 305Mtr) of D. LINK /AMP/KRONE or similar make (INSPECTION BY CONSIGNEE) | — | — | — | 3,38,550 | |
| — | 150.00 | — | — | ||
| Supply of Krone Termination Box complete with mounting 20 pair (INSPECTION BY CONSIGNEE) | — | — | — | 2,23,800 | |
| — | 150.00 | — | — | ||
| Supply of Krone Termination Box complete with mounting 50 pair (INSPECTION BY CONSIGNEE) | — | — | — | 3,70,350 | |
| — | 10.00 | — | — | ||
| Supply of Permanently lubricated HDPE Duct with outer diameter of 40mm and inner diameter of 33mm as per specification RDSO/SPN/TC/45/2013 Revision 2.0. The length of the duct shall be 1km. Two end plugs shall be provided along with the drum. (INSPECTION BY RITES) | — | — | — | 6,62,230 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Checklist.pdf
ATTACHMENT
NEFT-Form.pdf
ATTACHMENT
Annexure-V-and-VA.pdf
ATTACHMENT
GCC-2022-and-ACS.pdf
ATTACHMENT
JPO-Cable-Cuts.pdf
ATTACHMENT
Tender-Document_1.pdf
ATTACHMENT
Tender-Form_2.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .