Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-Finance VILL PO KARASA TEHSIL ROHRU DISTT SHIMLA HP | SHIMLA | HIMACHAL PRADESH | 170009 | L1 | Accepted-Finance L1 | |
| 2 | L2₹2.0 L+₹4,156.20 (2.18%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹2.0 L+₹5,085 (2.66%)Rejected-Finance | L3 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | happy kaith L2 | MAA KAMAKHYA BLESSINGS L3 | YASHWANT SINGH L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge. Pick & Jumper work | 43.2 | Cum | 446 ₹19,267.2 | 450 ₹19,440 | 440 ₹19,008 Lowest |
| 2.00Dismantelling of butt welding GI pipe with cutting of pipes at site the rate onclude entire carriage of material, flushing, cleaning, complete to the bestsatisfaction and direction of Engineer in Charge witin all leads and lifts. (Earth work in trenches will be measured and paid for seperately). | ||||||
| 2.01 | G.I. Tube 150 mm dia MC. | 120 | Rmt. | 89 ₹10,680 | 90 ₹10,800 | 88 ₹10,560 Lowest |
| 3.00Relaying and binding of dismantelled Gl pipe ( by way of circumfrential butt welded joints by electrical are welding) and testing of Gl pipe of following dia meters confirming to BIS 1239 and capable of withstanding required test pressure in a random length of 4 to 7 meters. including manufacturing reducers/ tapers, all short pieces, beds ete, as per site requirement made from parent tubes. The laying of pipe will include all operation such as cutting, welding. jointing, fabrication of bends, tees etc. including testing complete in all respects to the satisfaction of the Engineer in charge. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately). | ||||||
| 3.01 | G.I. Tube 150 mm dia MC. | 120 | Rmt. | 270 ₹32,400 Lowest | 275 ₹33,000 | 270 ₹32,400 Lowest |
| 4.00Spot welding of G.I./MSERW Pipe of following dia pipe of the exisiting scheme including cutting. welding, alignining etc complete in all respect including testing. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. | ||||||
| 4.01 | 50 mm dia | 30 | Joints. | 672 ₹20,160 | 670 ₹20,100 | 650 ₹19,500 Lowest |
| 4.02 | 65 mm dia | 22 | Joints. | 741 ₹16,302 | 744 ₹16,368 | 710 ₹15,620 Lowest |
| 4.03 | 80 mm dia | 20 | Joints. | 823 ₹16,460 | 825 ₹16,500 | 730 ₹14,600 Lowest |
| 4.04 | 100 mm dia | 20 | Joints. | 993 ₹19,860 | 995 ₹19,900 | 983 ₹19,660 Lowest |
Tender Value
₹1.9 L
EMD Value
₹3,730
Closing Date
24 Sept 2026, 5:00 pmClosed
EE JSV Division Anni
EE JSV Division Anni
(SH Dismantelling /Relaying of G.I. pipe of 150 mm dia 120 Rmt. and Spot welding of G.I. pipe 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm dia at various Rds).
2026_HPIPH_143629_1
6020-6080
Open Tender
Civil Works
Item Rate
60 days
Nirmand
Please refer Tender documents.
9 documents required · 9 mandatory
₹350
₹3,730
30 Sept 2026
17 Sept 2026
25 Sept 2026
18 Sept 2026
24 Sept 2026
18 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches (For pipes and pits) up to all depths and in all classification of each work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling or wedging out of soft/ hard rock, where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking, timbering and dewatering where ever required. Stacking usable and unusable material/ soil separately and after laying, jointing and testing of pipes, returning the usable soil in 15cm layers by ramming and watering and then disposing of all surplus excavated soil/ unusable material as directed within all leads/ lifts including restoration of unmetalled surfaces to its original condition and including cost of diversion for traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge. Pick & Jumper work | 43.2 | Cum | - | - |
| 2Dismantelling of butt welding GI pipe with cutting of pipes at site the rate onclude entire carriage of material, flushing, cleaning, complete to the bestsatisfaction and direction of Engineer in Charge witin all leads and lifts. (Earth work in trenches will be measured and paid for seperately). | |||||
| 2.01 | G.I. Tube 150 mm dia MC. | 120 | Rmt. | - | - |
| 3Relaying and binding of dismantelled Gl pipe ( by way of circumfrential butt welded joints by electrical are welding) and testing of Gl pipe of following dia meters confirming to BIS 1239 and capable of withstanding required test pressure in a random length of 4 to 7 meters. including manufacturing reducers/ tapers, all short pieces, beds ete, as per site requirement made from parent tubes. The laying of pipe will include all operation such as cutting, welding. jointing, fabrication of bends, tees etc. including testing complete in all respects to the satisfaction of the Engineer in charge. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately). | |||||
| 3.01 | G.I. Tube 150 mm dia MC. | 120 | Rmt. | - | - |
| 4Spot welding of G.I./MSERW Pipe of following dia pipe of the exisiting scheme including cutting. welding, alignining etc complete in all respect including testing. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. | |||||
| 4.01 | 50 mm dia | 30 | Joints. | - | - |
| 4.02 | 65 mm dia | 22 | Joints. | - | - |
| 4.03 | 80 mm dia | 20 | Joints. | - | - |
| 4.04 | 100 mm dia | 20 | Joints. | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.66 MB
form6.pdf
Tender Documents • 0.38 MB
terms.pdf
Tender Documents • 0.46 MB
BOQ_213453.xls
BOQ • 0.34 MB
form8.pdf
Tender Documents • 1.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .