Rainwater harvesting/Stone pitching and other beautification at Rani ka Talab, Ambala Cantt. (Phase-II)

Earth Work in Excavation in trenches, n. exc 1.5m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc n. exc 10 sq m on plan and n exc. 1.5 m in depth and getting out all as sp. in MES SSR 2020.(For Retaining wall)

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out (in Mud).

Surface excavation for making slopes of wall in Embankment all as specification in MES SSR 2020.

M/L for Stone Walling of squared rubble, regular coursed well bonded bedded & solidly hearted built in C.m 1:6 all as specified in MES SSR 2020. (Note:1. Yamuna and near by river stone will be used only. 2. Only OPC cement will be used for the purpose)

M/L cement concrete 1:2:4 on sloping wall 50 mm thick complete all as specified in MES SSR 2020. (NOTE:- Only OPC cement will be used for all works.)

M/L stone pitching with dry stone of size 9” to 14”, (thickness 9" x 12") with sand Grouting all as specified in MES SSR 2020.

M/L for laying of reinforced concrete pipe class NP-3, 900mm bore dia, laid & jointed complete with collars all as specified in MES SSR 2020.

M/L for Providing C. concrete bed to drain pipes including packing under and completely surrounding pipes with concrete 1:3:6 after they are laid and tested all as specified in MES SSR, 2020. (900mm dia)

M/L PCC bed 1:5:10 stone aggregate in fillings & Mass concrete all as specified in MES SSR 2020.

Ist quality interlocking tiles 80 mm thick M-40 (Vibrator moulded tiles) with Aroma color laid over sand 25mm to 40mm thick all as specified as per sample, Milano, Cosmo etc. coloured tiles (Colour coated/polished tiles).

M/L screed in c.mortar 1:4,15 mm thick and chequered tiles 40 cm x 40 cm x 35 mm thick white tiles & colour tiles 1:1.5:3 cement concrete (M-35) top layer with white cement 80 % Gray Cement 20%, dolomite powder/Marble powder 6mm chips top quality complete in in MES SSR, 2020

Removing excavated material Upto 200 m and depositing where directed at a level n exc. 1.5 m above the starting point (excavation will be done by department JCB & Hired JCB)

Removing excavated material beyond 200 m to 1Km and depositing where directed at a level n exc. 1.5 m above the starting point (excavation will be done by department JCB & Hired JCB)

Removing excavated material beyond 1 Km to 5 km and depositing where directed at a level n exc. 1.5 m above the starting point (excavation will be done by department JCB & Hired JCB)

S/F Reinforcement 10 mm dia & over cut to length bent to shape required size including cranking, bending & binding with M.S. annealed wire not less than 0.9 mm dia all as specified in MES SSR 2020.

M/L RCC work 1:1½:3 for slabs supported on walls, beams and columns in floors, roofs, landing balconies, canopies deck slabs, columns, pillars and in shelves and the like all as specified in MES SSR, 2020. (NOTE:- Only OPC cement will be used for all works.)

Use & waste of formwork to soffits and sides of suspended slab, such as roof slabs, floor slabs, landings and columns similar work not exceeding 200 mm thick (Horizontal or sloping) fair finished surfaces all as sp. in MES SSR 2020.

S/F framed work such as grills, grating, cattle traps etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters, trusses, MS bar fencing, walk wais; railings; frame work of water tanks and similar work confirming to Fe 410-0 or Fe 310-0 all as specified in MES SSR, 2020.

Dewatering of water body/Diggi by Engine capacity 20-25 HP including POL and operator all as sp.

Dewatering of water pits by putting submersible motor (deploying electrician and skilled labour for electric connection/disconnection and shifting of electric motor) complete all as reqd.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

The other works to be carried out shall be payable as per MES Schedule of rate all as specified in MES SSR 2020.

Please Enable Macros to View BoQ information