PROVN OF BAKERY SHOP AND SHED AND ADDN ALTN TO BLDG P110 AT AHMEDABAD

Amount

Dismantling floor, interlocking, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.

Demolition of brick work built in cement or cement lime mortar complete.

Demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified directed

Demolition of cement concrete of any description and in any position not otherwise specially provided complete.

Dismantling ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards / slabs / blankets, any thickness including cover fillets complete.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan in depth in soft / loose soil and getting out complete.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Hard/dense soil complete.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.

Labour only for soil filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete.

M&L Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete.

M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D-2 1:4:8 (40 mm graded aggregate) etc complete all as specified and as directed

M&L for Cement concrete type C-2 (1:3:6) 40mm graded stone aggraegate in foundations, filling and mass-concrete complete all as specified and as directed.

M&L for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as benching/ coping etc.complete.

M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete

M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in slabs, complete

M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in beams complete

M&L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete

Supply only Integral waterproofing compound complete.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 by using old sized bricks complete.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps/jambs/pillars/window cills/cooking platforms etc and set in cement mortar (1:4) ncluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.

Use & waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, surface finished fair complete.

Use & waste for form work for rough finished surfaces of concrete measured flat for Roof Slab complete.

Use & waste for formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams, etc complete.

Use & waste for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete.

Use & waste for Form work to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and simila rwork exc 10cm but n exc 20cm complete.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) and refixing in other opening complete.

Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.

S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube opening as per specification complete.

S&F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete.

S&F 150 mm size aluminium anodised door handles complete.

M&L TMT bars 10mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete.

M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete.

S&F MS Rolled sections of tublar/channel/ hollow/ angle as in main and cross beams, rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates of Fe 410-W( Gde-E-25 ) quality A complete.

S&F MS Rolled sections as in stanchions, posts, built up of one beam of tubular / channel / hollow / angle with flange plates, caps, bases, splices, angle brackets, cleats and other connections of Fe 410-W( Gde-E-250 ) quality A complete.

S&F for MS Rolled sections in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 incl.cutting, grinding, welding etc.as required at site complete.

M&L for cement concrete type D-2, 1:4:8 (40 mm graded agg.) 75 mm thick as sub base in foundation complete.

M&L for Vitrified Ceramic tiles light shade 10 mm, (square or rectangular) area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete.

M&L for Vitrified Ceramic tiles light shade 10 mm, (square or rectangular) area of each tile n. exc 0.36 sqm in vertical surfaces such as skirting over and incl 10 mm thick backing coat in cement mortar 1:4 complete.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete.

M&L Rendering on fair faces of brick work of thickness 15 mm thick in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instructions finishing the surface fair and even with out using extra cement complete.(WPC measured and paid separately)

M&L, for rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 is to be finished even & smooth (without using extra cement) complete.

M&L for 10mm thick rendering on cement concrete as in ceiling with cement mortar 1:4 to be finished even & smooth (without using extra cement) complete.

M&L for preparation of new surfaces of ceiling plastered sheet and applying three coat of white wash complete

M&L for preparation of new plastered surfaces on walls and applying two coats of weather proof emulsion over a coat of white cement primer complete.

M&L for preparation of new plastered surfaces on wall and applying two coats of exterior emulsion paint with anti fungal properties & similar to Apex ultima of Asian paint with white Exterior wall care putty on over one coat of primer on walls complete.

M&L for complete removal of existing treatment and applying two coats of plastic emulsion paint over white wall care putty avarage 1.5mm thk with Primer on walls complete

M&L for preparation of new plastered surfaces on wall and applying two coats of Plastic emulsion paint over white wall care putty avarage 1.5mm thk and a coat of primer, on walls complete.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over with wall care putty with priming plastered and other surfaces with alkali resistant priming paint complete

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete.

S&F designer false ceiling made of 12 mm thick gypsum board over and including all GI grid of standard quality to hold false ceiling including two coats interior emusion of any colour over one coat of primer and two coats of acrylic putty complete.

S&F 12mm thick toughned glass door incl 02 Nos SS handle, floor srping and all necessary fittings and fixtures complete.

S&F 10mm thick Polycarbonate sheet as roof and fixed with all necessary fittings and fixtures complete.

M&L for Glossy finish coloured chequered cement concrete tiles 300 x 300 x 20-25mm thick as in floor, paving etc set, jointed in neat cement slurry and pointed in cement slurry with grey cement and pigments over and including 15 mm thick screed bed or bedding layer of mortar in CM 1:6 complete.

S&F 25 mm dia fancy type curtain rod with brackets of stainless ends etc fixed complete.

S&F 5 mm thick looking Mirror mounted in 6mm thick plywood/AC building board with wooden frame all around complete.

S&F aluminium powder coated section size 65 x 44 x 1.48 mm for partition walls fixed type in panels square or reqtangular section including gasket aluminium cleat 6 mm dia rounded bars, 8mm thick tinted glass panes fixed complete.

S&F powder coated anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type & side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock, hydraulic door closer with 5mm thick tinted glass / prelaminated particle board panel and making good of wall surface to match existing surface complete.

S&F Stainless steel butt hinges medium weight 100mm long complete.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators including making good the wall surfaces with matching colour on wall for One light point controlled by one switch complete.

All as described in Item No 63 above but for One fan point controlled by one switch.

All as described in Item No 63 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.

All as described in Item No 63 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.

All as described in Item No 63 above but for one 16 amp socket outlet controlled by one switch on independent board using 2.5sqmm copper conductor cable complete.

S&F modular switch one way 6 amp 1 module

S&F modular switch one way 16 amp 1 module

S&F modular socket 6/16 - 2/3 pin combined 2 module

S&F modular socket 6 amp 2/3 pin combined 2 module

S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete

S&F modular hum free electronic step fan regulator, 100 watt 2 module

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 and similar to Make Philips cat no. ENDURALEDBATTEN " BN 108C LED 20S PSU CDL WH "complete.

S&F in repair energy efficient recessed mounted LED luminaries suitable for for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white color PVC insulated & sheathed three core flexible multistranded copper conductor cable & similar to cat no LCTLRN-36CDL of crompton make complete.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required and similar to Philips cat no WT202W LED6S CW PSU S1 PC complete.

S&F recess / suspended LED round panel light 09 watt with powder coated rim 09 watt high efficiency designer recessed mirror optic luminary with ceiling cut out size 9 watt complete, 6500K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.95 and life> 15000 hrs & similar to Make Crompton model no LSDRSD-9W-CDL/NW/WW complete

S&F recess / suspended LED round star magic panel light colour changing 3 in 1, 12 watt with powder coated with ceiling cut out size 12 watt complete, 6500K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.95 and life> 15000 hrs & similar to Make Crompton model no LSDMAGICRMN-12W complete.

S&F Led Strip light BIS safety standards registered with surge protection 2.5 kV, 8 Watt/Mtr, 220V AC 90 mtr complete.

M&L for submain wiring using 2x6 sqmm and 1x6 sqmm earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic 20 mm dia PVC conduit, medium grade, ISI marked ivory colour along with accessories complete

M&L for submain wiring using 2x4sqmm and 1x4 sqmm earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic 20 mm dia PVC conduit, medium grade, ISI marked ivory colour along with accessories complete

S&F MCBs Single pole 6 to 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete

S&F MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete

S&F MCBs Four pole 63 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete

S&F MCB distribution board ETPN, 415 volts 4 way powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43- IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete.

S&F MCB distribution board SPN, 240 volts, 4 ways, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete.

S&F wall mounted fan with powder coated guards and blades of approved colour, AC single phase, 230 volts, 50Hz, 1440 rpm, 400mm sweep with adjustable verticle angles & three speed controls mounted within reach of hands with necessary connecting cables recommended/ provided by manufacturer complete.

S&F ceiling fans with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete.

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete.

S&F sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V with one single pole MCB of capacity 20 A complete.

M&L for earthing with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as shown in EP-3 of SSR Part-I complete

S&F wall mounted fan with powder coated guards and blades of approved colour, AC single phase, 230 volts, 50Hz, 1440 rpm, 400mm sweep with adjustable verticle angles & three speed controls mounted within reach of hands with necessary connecting cables recommended/ provided by manufacturer complete.

S&F fully transparent meter box suitable for three phase prepaid energy meter made of polycarbonate / high grade engineering plastic to permit clear view of display and can be sealed in such way that the entire meter is accessible only after breaking the seal complete.

S&F Pop up box 8 (2x4) module, matt aluminium finish, equipped with push and slide locking system for concrete floors or for raised access floors complete.

S&F over floor trunking 50 x 12 mm, supplied with cover,3 compartments for protecting cables on passageways supplied with cover complete.

S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.

nirman construction

DMA PROJECTS

TECH SERVE SOLUTIONS