Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC 1st Lowest, Reasonable Rate | |
| 2 | L2₹11.0 L+₹29,996.50 (2.80%)Rejected-Finance C 23 CC | L2 | Rejected-Finance 2ND LOWEST |
| Sl No | Description | Qty | Unit | TARUN ENGINEERING WORKS L1 | RAMAN CONSTRUCTION CO. L2 |
|---|---|---|---|---|---|
| 1.00 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose / soft soil and getting out for under ground cable/Pipe lines / erection of poles, stays etc complete all as specified and as directed. | 121.45 | Cum | 90 ₹10,930.5 Lowest | 250 ₹30,362.5 |
| 2.00 | Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed. | 103.23 | Cum | 70 ₹7,226.28 Lowest | 120 ₹12,387.9 |
| 3.00 | Removing of excavated material n, exc 50 mtr away and depositing where directed at a level n, exc 1.5 mtr above the starting point complete all as specified. | 18.22 | Cum | 80 ₹1,457.4 Lowest | 199 ₹3,625.28 |
| 4.00 | Taking out old unserviceable DI/CI pipe with all fittings (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead from trenches of 300 mm dia bore all as directed :-
(Note : Excavation & earth work will be measured & paid seperately under respective item ) | 18 | RM | 150 ₹2,700 | 50 ₹900 Lowest |
| 5.00 | Description all as per ser item No 4 here-in-before but for 200 mm bore | 30 | RM | 150 ₹4,500 | 80 ₹2,400 Lowest |
| 6.00 | Description all as per ser item No 4 here-in-before but for 150 mm bore | 30 | RM | 150 ₹4,500 | 70 ₹2,100 Lowest |
| 7.00 | Description all as per ser item No 4 here-in-before but for 100 mm bore | 30 | RM | 75 ₹2,250 Lowest | 90 ₹2,700 |
| 8.00 | Description all as per ser item No 4 here-in-before but for 80 mm bore | 30 | RM | 75 ₹2,250 | 60 ₹1,800 Lowest |
| 9.00 | Supply and laying DI pipe of 300 mm bore ISI marked, spigot and socketed type, Class K-7 centrifugally cast suitable for rubber tyton joints laid in trenches complete all as specified and as directed by Engineer-in-charge (Earth work for excess width of taking down, route change of pipe & joints shall be measured and paid separately)
Make: Electro Steel/Tata/NECO/Kesoram/Rashmi Metaliks | 12 | RM | 6,000 ₹72,000 | 1,800 ₹21,600 Lowest |
| 10.00 | Description all as per ser item No 9 here-in-before but for 200 mm bore | 18 | RM | 2,900 ₹52,200 | 1,500 ₹27,000 Lowest |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
24 Sept 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (i) RAIWALA
AGE (i) RAIWALA
REPAIR AND REPALCEMENT OF GI/ CI PIPE LINES, VALVES AND OTHER ALLIED WORKS AT ZONE C AND D AT MIL STN RAIWALA UNDER AGE(I) RAIWALA
2026_MES_785142_1
8161/E8
Open Tender
Civil Works
Works
AGE (I) RAIWALA
Please refer Tender documents
8 documents required · 8 mandatory
₹500
Yes
AGE (I) RAIWALA
₹20,000
Yes
13 Oct 2026
21 Aug 2026
26 Sept 2026
21 Aug 2026
24 Sept 2026
5 Sept 2026
21 Aug 2026 - 3 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose / soft soil and getting out for under ground cable/Pipe lines / erection of poles, stays etc complete all as specified and as directed. | 121.45 | Cum | - | - |
| 2 | Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed. | 103.23 | Cum | - | - |
| 3 | Removing of excavated material n, exc 50 mtr away and depositing where directed at a level n, exc 1.5 mtr above the starting point complete all as specified. | 18.22 | Cum | - | - |
| 4 | Taking out old unserviceable DI/CI pipe with all fittings (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead from trenches of 300 mm dia bore all as directed :-
(Note : Excavation & earth work will be measured & paid seperately under respective item ) | 18 | RM | - | - |
| 5 | Description all as per ser item No 4 here-in-before but for 200 mm bore | 30 | RM | - | - |
| 6 | Description all as per ser item No 4 here-in-before but for 150 mm bore | 30 | RM | - | - |
| 7 | Description all as per ser item No 4 here-in-before but for 100 mm bore | 30 | RM | - | - |
| 8 | Description all as per ser item No 4 here-in-before but for 80 mm bore | 30 | RM | - | - |
| 9 | Supply and laying DI pipe of 300 mm bore ISI marked, spigot and socketed type, Class K-7 centrifugally cast suitable for rubber tyton joints laid in trenches complete all as specified and as directed by Engineer-in-charge (Earth work for excess width of taking down, route change of pipe & joints shall be measured and paid separately)
Make: Electro Steel/Tata/NECO/Kesoram/Rashmi Metaliks | 12 | RM | - | - |
| 10 | Description all as per ser item No 9 here-in-before but for 200 mm bore | 18 | RM | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
BOQ_879786.xls
BOQ • 0.31 MB
8161tenderdoc.pdf
Tender Documents • 0.91 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .