Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹8.6 L
EMD Value
₹17,200
Closing Date
19 Jul 2021, 11:00 amClosed
Executive Engineer
Jal Shakti Division Paonta Sahib Distt. Sirmour HP
Laying Jointing of HDPE Pipe in distribution system
2021_HPIPH_49714_5
PNT-SMR02-720 No. 5132-5231 Dated 06/07/2021
Open Tender
Civil Works
Item Rate
90 days
Paonta Sahib
Please refer to tender documents
6 documents required · 6 mandatory
₹250
EE JS Division Paonta Sahib
₹17,200
Yes
6 Aug 2021
10 Jul 2021
19 Jul 2021
10 Jul 2021
19 Jul 2021
10 Jul 2021
10 Jul 2021 - 19 Jul 2021
Amount
Excavation in drains and channels etc.in earth work for pipes up to all depths in all classification of earthwork such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft / hard rock where blasting is prohibited in all lifts including jungle clearance wherever required, trimming & dressing of sides, leveling of beds to correct grade including shoring/struting, planking, timbering & dewatering wherever required stacking the useable/unuseable material/soil seperately & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unuseable material as directed with in all leads & lifts including restoration of un-metalled surfaces to its original condition & including cost of diversion for traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with-in all leads & lifts as per directions of the Engineer Incharge
Laying , jointing & testing high density polythylene pipe for use for buried water main and services .The jointing of pipe shall be done by Butt fusion welding which shall confirm to clause 3.2.1.2 of IS-7634 ( part-II)-2012etc. each Pipe shall be BIS marked ( IS-4984-1995 or latest with uptodate ammendments of PE 63 of following nominal & dia of pressure rating complete in respect. PE-63, PN-4 of Following diameters
i) 160 mm outer diameter
ii) 140mm outer diameter
iii) 110mm outer diameter
Providing Fixing of PVC Ball Valve of following dia complete in all respect including all leads lifts and carriage of material and as per the direction of Engineer-in-charge
i) 160 mm outer diameter
ii) 140mm outer diameter
iii) 110mm outer diameter
Providing Fixing of PVC Reducer of following dia complete in all respect including all leads lifts and carriage of material and as per the direction of Engineer-in-charge
160x140 mm outer diameter
140x110 mm outer diameter
160x110 mm outer diameter
Providing Fixing of PVC moulded butt weld Elbow of following dia complete in all respect including all leads lifts and carriage of material and as per the direction of Engineer-in-charge
i) Elbow 160mm Dia
ii) Elbow 140 mm dia
iii) Elbow 110 mm dia
Providing Fixing of PVC coupled Equal Tee of following dia complete in all respect including all leads lifts and carriage of material and as per the direction of Engineer-in-charge
i) Tee 160 x160x140mm Dia
ii) Tee 140x140x110 mm Dia
iii) Tee 160x160x110 mm Dia
Providing Fixing of Tail end Piece of following dia complete in all respect including all leads lifts and carriage of material and as per the direction of Engineer-in-charge
i) Tail end piece 110 mm Dia
Providing Fixing of PVC Bend with End Cap of following dia complete in all respect including all leads lifts and carriage of material and as per the direction of Engineer-in-charge
i) Bend with End Cap 110 mm dai
Himalaya Enterprises
MAHOKAM SINGH
M/S Sharma Enterpirses
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .