NIT NO. 09 ITEM NO. 01

Modernisation of GeN2 Life MOD MR 1.5 MPS 13 pax, 7 stops, SSHC lift with machine no G001111 by furnishing, erecting and installation as per schedule provided by manufacturer. The following works and specifications are required in this lift: Capacity: 884 KG atleast, 13 persons Speed: 1.5 mps Rise: 21 meter Stops: 7 stops with (all opening on the same side) with floor designation as 0,1,2,3,4,5 and 6 Controller type: LVA/ACD Drive: VF Regenerative(Closed Loop) Power Supply: 400/415 V(3 phase AC) Operation: Full collective operation. Car Group: One Car Group(Simplex) Machine: PM Gearless( Located above shaft) Traction Media: Flat Coated Steel Belt. Car Finish: Rear mid panel – Stainless Steel Honeycomp, Rear Corner Panels- Stainless steel honeycomb, Side Mid Panel- Stainless steel honeycomb, Side Corner panels-Stainless Steel honeycomb, Front Panels- Stainless steel honeycomb. False Ceiling Type: CD-41 False Ceiling Finish: Stainless Steel #4(Hairline) Ventillation: Cross flow fan Hand Rails: Stainless steel mirror finish handrails on all car panels( side LH, side RH and rear) Flooring: granite. Car Door finish: Stainless steel honeycomb. Landing door finish: Stainless steel honeycomb Fire rated doors: Fire rating 60 mins. Pit depth: 1600 mm. Overhead: 6700 mm. Hoistway Dimensions(WXD- mm): 2450mm W X 1690 mm D Car Dimensions (WXDXH – mm: 2000 mm W X 1100 mm D X 2200 mm H. Car and hoistway door type: Center opening (CO) doors. Door opening (WXH – mm): 900 mm W X 2000 mm H. Door operator: DC Door operator. COP: Stainless steel #4 (Hairline). Car Position Indicator: Monochrome LCD- Black Background and blue font. Hall Fixtures: O2000. Hall Fixture Face Plate: Stainless Steel #4(Hairline) Hall Button arrangement: Hall Button with HPI. Standard Features: Anti-nuisance Car Call Protection. Independent Service( for Duplex only). Overload device. Nudging, emergency firemen’s service, emergency car light unit, Infrared curtain door protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/ close button, manual rescue operation, belt inspection drive, auto fan cut off. Options Included: Automatic rescue operation, voice synthesizer, intercom, potential free contacts, disable friendly features as per recommendations of Accessible India Campaign and any other requirement as per site requirement and directions of engineer in charge. Controller: Microprocessor based type with full collective operation, including intercom device. Minor civil works that may be required are in scope of DJB(However, all the responsibilities of the same lies with the firm ).Car guide rails, counter weights guide rails, car frame, counter weight frame with filler weights, buffer and beams(for machine) may be reused as per site requirement. This includes 12 months all inclusive maintenance after handing over of lifts. Make:- Kone Elevators, Thyssen Kruppe, Schindler, Hitachi ,Otis ,Fujitec ,Mitsubishi and Johnson

Modernisation of GeN2 Life MOD MR 1.5 MPS 8 pax, 8 stops, SSHC lift with Machine No. G001112 by furnishing, erecting and installation as per schedule provided by manufacturer.The following works and specifications are required in this lift: Capacity: 554 KG atleast, 8 persons. Speed: 1.5 mps. Rise: 25 meter. Stops: 8 stops with (all opening on the same side) with floor designation as -1, 0,1,2,3,4,5 and 6. Controller type: LVA/ACD. Drive: VF Regenerative(Closed Loop). Power Supply: 400/415 V(3 phase AC). Operation: Full collective operation. Car Group: two Car Groups (Duplex). Machine: PM Gearless( Located above shaft). Traction Media: Flat Coated Steel Belt. Car Finish: Rear mid panel – Stainless Steel Honeycomp, Rear Corner Panels- Stainless steel honeycomb, Side Mid Panel- Stainless steel honeycomb, Side Corner panels-Stainless Steel honeycomb, Front Panels- Stainless steel honeycomb. False Ceiling Type: CD-41. False Ceiling Finish: Stainless Steel #4(Hairline). Ventillation: Cross flow fan. Hand Rails: Stainless steel mirror finish handrails on all car panels( side LH, side RH and rear). Flooring: granite. Car Door finish: Stainless steel honeycomb. Landing door finish: Stainless steel honeycomb. Fire rated doors: Fire rating 60 mins. Pit depth: 1600 mm. Overhead: 6700 mm. Hoistway Dimensions(WXD- mm): 1880mm W X 1600 mm D Car Dimensions (WXDXH – mm: 1400 mm W X 1020 mm D X 2200 mm H. Car and hoistway door type: Center opening (CO) doors. Door opening (WXH – mm): 800 mm W X 2000 mm H. Door operator: DC Door operator. COP: Stainless steel #4 (Hairline). Car Position Indicator: Monochrome LCD- Black Background and blue font. Hall Fixtures: O2000. Hall Fixture Face Plate: Stainless Steel #4(Hairline) Hall Button arrangement: Hall Button with HPI. Standard Features: Anti-nuisance Car Call Protection. Independent Service( for Duplex only). Overload device. Nudging, emergency firemen’s service, emergency car light unit, Infrared curtain door protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/ close button, manual rescue operation, belt inspection drive, auto fan cut off. Options Included: Automatic rescue operation, voice synthesizer, intercom, potential free contacts, disable friendly features as per recommendations of Accessible India Campaign and any other requirement as per site requirement and directions of engineer in charge. Controller: Microprocessor type with full collective operation, including intercom device. Minor civil works that may be required are in scope of DJB(However, all the responsibilities of the same lies with the firm). Car guide rails, counter weights guide rails, car frame, counter weight frame with filler weights, buffer and beams(for machine) may be reused as per site requirement. This includes 12 months all inclusive maintenance after handing over of lifts. Make:- Kone Elevators, Thyssen Kruppe, Schindler, Hitachi ,Otis ,Fujitec ,Mitsubishi and Johnson