Providing new toilet and bathroom facilities in field control room area and replacing damaged roof over acid transfer pumps in SA plant of FACT CD, Ambalamedu, Kochi.

Providing new toilet and bathroom facilities in field control room area and replacing damaged roof over acid transfer pumps in SA plant of FACT CD, Ambalamedu, Kochi.

Scrubbing and cleaning using wire brush/ sandpaper or any other mechanical equipment to remove existing paint/ primer on wall surface to provide a rough surface followed by hacking of plastered surface for tile laying using adhesive in the area

Dismantling CC/ RCC works including separately removing & stacking available reinforcement & clearing away the debris as per directions within a distance of 150 m.

Dismantling and removing windows/ ventilators/shelves/cup boards/ AC frames etc including removal of shutters, hinges, holdfasts and all other fittings and stacking materials as per deptl.instructions

Dismantling and clearing away any thickness of rubble, brick, laterite in CM including disposal of debris as per directions within a distance of 150 m.

Earth work excavation in all classes of soil including narrickal but excluding hard rock which require blasting including back filling in basement & sides of foundation, depositing on bank within an initial lead of 50 m including breaking clods, watering, ramming and sectioning of spoil bank etc.complete- Up to 1.5 m depth from ground level.

Cement block masonry work in CM 1:6 using good quality, approved cement blocks including charges for conveying, scaffolding charges etc. as per departmental instructions for super structure walls up to floor five level, excluding cost of cement

Cement concrete work in 1:1½:3 nominal mix using 20 mm and downgrade hard granite broken stone including all charges for mixing concrete, laying, consolidating, curing etc.complete but excluding cost of form work & reinforcement works- For foundation footings, bottom & sides of trenches, equipment foundations, plinth beams, lintels, slabs, columns & beams etc.up to floor five level excluding cost of cement

Cement plastering with CM 1:4,12 mm thick one coat floated hard and trowelled smooth at all levels,excluding cost of cement

Providing reinforcements to RCC works with MS / Tor steel rods including all charges for conveying, straightening/ uncoiling, cutting, bending, placing rods in position & tying with GI / black annealed tying wire of suitable gauge etc. complete. excluding cost of reinforcement.

Providing and fixing PVC door of syntex or equivalant make with shutter frame made of extruded plastic section having dimension of 60 x 24 mm or nearest, paneling with single panel hollow plastic section of 20 mm thick with average wall thickness of 1 mm and outer frame of door made of extruded plastic section of 48 x 40 mm or nearest including providing and fixing all required fittings such as stainless steel butt hinges, PVC tower bolts, PVC handles etc.complete as per manufacturers specifications.

Waterproofing of Bathroom/ toilet floor: i) Surface preparation by cleaning the surface using wire brush in order to remove all deleterious matters and cleaning with water jet spray (if required) including removing old worn out tar felt, deleterious materials etc. ii) All pipe penetration shall be sealed with polymer modified mortar (PMM). iii) Saturate the surface with clean water before application of waterproof coating system. Once water get dried off apply one coat of High Performance & Ultra flexible polymer modified elastomeric waterproofing membrane system of Fosroc-Brushbond ultrafex or equivalent system over the concrete followed a reinforcement fibre mesh over the layer of membrane. iv) Apply two coats of High Performance & Ultra flexible polymer modified elastomeric waterproofing membrane system over the above mentioned initial layer after sufficient curing for each layer (Total consumption requirement for all 3 coats as per manufacturer's spec)

Providing and laying with approved brand rectified Glazed Ceramic floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in suitable colours laid cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. with adequate joint spacing of 3mm followed by grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge

Providing and fixing first quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-Charge for dadoing to walls cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. i followed by grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge

Supplying and fixing PVC floor trap (single or multy type) of approved brand 110 mm size with required provision of outlets and inlets as per manufacturers specifications, cutting and making good the walls and floors, etc. complete.

Supplying and fixing 125 mm (5 inch) Stainless steel floor gratings (two piece) to PVC trap as per instructions at site.

Supplying and fixing approved quality white glazed vitreous china flat back lipped front urinal of size 430x380x230 mm or nearest size with 1No. 15 mm PVC heavy type connection and 1No.15mm CP regulating valve of superior make ,CP spreader with flush pipe fixing the urinal to wall with Stainless steel screws with plastic grips including cutting and making good the walls etc. complete as per deptl instructions.

Supplying and fixing urinal partition with "flair Division plate" of Johnson white colour or equivalent

Supplying conveying and fitting 550x400mm or nearest size wash hand basin of white glazed vitreous china approved quality with a pair of special alloy bolts for fixing the basin on walls with 1No. 15 mm heavy type CP brass pillar tap of approved make 1No.heavy type 15 mm PVC connection and 1No.15 mm CP regulating valve of superior make ,1No. 15mm CP waste coupling,32mm PVC waste pipe with cp learning nut 1No. etc. including cutting and making good the walls,etc. complete.

Supplying and fixing at all levels approved quality /brand European type vitreous china white glazed water closet pan with P/S trap and White/Black duro plastic seat and lid with CP brass hinges and CP rubber buffers, 10 litre capacity PVC low level flushing cistern of approved make with all fittings 1No.32mm CP brass flush bend, 1No:15mm superior PVC connection heavy type ,15mm CP regulating valve,cutting and making good the walls and floors including giving connection to sewer pipe with all necessary specials,etc. complete as per direction at site

Supplying Angle valve with wall flange of standard range (CERA, JOHNSON or equivalent)

Supplying Long body bib cock of standard range CERA/JOHNSON or equivalent type

Supplying to Civil store 100 mm CP brass shower rose with 15 mm / 20 mm inlet and of approved brand / manufacturer

Supplying and fixing 600 x 450 mm or nearest size bevelled edge mirror of approved quality superior make " with hard board or plastic sheet on the rear and fixing the same in position with necessary plugs & SS screws etc complete

Supplying and fixing 600 x20 mm or nearest Stainless steel heavy duty approved brand towel rod with brackets with necessary SS screws, pastic grips etc. complete

Supplying and fixing Health faucets of standard range approved by Engineer-in-Charge (CERA,JOHNSON or equivalent brand)

Supplying and fixing best quality SS soap dish including cost of screws, wooden plugs etc.

Painting one coat of priming coat on plastered surface (interior) with approved quality cement primer after cleaning the surface including all cost of materials, labour etc.

Painting two coats with ready mixed plastic emulsion paint of approved quality and colour specified over the priming coat already done and paid separately after cleaning the surface well.

Supply and fixing stain less steel hanger unit having min 3 hooks

Supplying and fixing Concealed Stop cock ¾ inch “CERA/ JOHNSON/ PARRYWARE or equivalent type

Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cm pressure for lines with all required specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends, double junctions, vent cowls, etc. with or without door including cutting masonry or concrete floors, sunshades, etc and making the holes good after finishing the work. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer. This includes testing of joints complete at all levels. for waste water lines:110mm or nearest outer diameter

Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cm pressure for lines with all required specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends, double junctions, vent cowls, etc. with or without door including cutting masonry or concrete floors, sunshades, etc and making the holes good after finishing the work. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer. This includes testing of joints complete at all levels. for waste water lines 75mm or nearest outer dia.

Supplying, laying and jointing with solvent cement, Rigid PVC pipes conforming to IS 4985 Class V (10 Kg/cm2 pressure rating) for water lines with all required concealed (brass embeded) PVC specials, such as Tees, bends, elbow, union, reducer etc. with clamps if any including necessary cutting and making good the walls, earth work if required etc.complete for 25 mm OD Pipe

Dismantling AC / GI / Tufflite / Aluminium/ Zincalum sheet roofing, side cladding etc and depositing the debris away from plant limit within a distance of 150 m.

Dismantling AC/Aluminium/Zincalum ridge pieces and clearing away debris from the plant limit.

Dismantling the existing structural carefully without damaging the remaining portions including conveying and stacking at places pointed out initally & then removal of structural after cutting to suitable length to FACT ,Phase-1 scrap yard through mechnical means (Measurements will be based on actual weight taken at FACT's weigh bridge if required by Engineer-in-Charge)

Supplying, Conveying, fabrication and erection of structural steel work bolted or welded at all levels as per scope drawing for trusses, purlins, louver brackets, louver runners bracings, stair cases, platforms, hand rails ladder, threaded sag rods, splices, etc. with M.S angles, channels, tees, flats, RSJs, rods, pipes and plates including cutting, welding, cleaning, erecting and painting with two coats of zinc chromate primer (one shop coat and one coat after erection) and two coats of chemical resistant enamel paint of approved quality and colour over the primer including supply of necessary MS bolts and nuts other than holding down bolts.(The structural steel material shall be of M/s. SAIL / RINL / TISCO /JINDAL make) Required gas and electrodes will be supplied free of cost by FACT at stores

Roofing/ side cladding with AC corrugated/Semi corrugated sheets 6 mm thick with 7 mm or nearest available dia and suitable length GI Hooks/bolts and nuts,GI and bitumen washers, cutting sheets to required shape/length, providing a minimum overlap of 150 mm at ends including cost of AC sheets and all other materials, scaffolding charges etc complete at all heights.

Providing AC ridge capping with 7 mm or nearest size GI bolts & nuts and GI & bitumen washers, roofing compound etc. at all levels. (AC ridge will be supplied by the Company free of cost)

Erection of fabricated structural (dismantled or serviceable) at all levels such as trusses, brackets etc. including conveying repairing if any by straightening, cutting, welding etc. and erecting to lines and levels as per deptl. instructions. (The fabricated structural, gas & electrodes will be supplied by the Company free of cost).

Supply and fixing of RCC cylindrical septic tank with three chambers for 20 users (1000 litres) having wall thickness of 50mm or nearest, inner diameter 750mm, outer diameter 850mm, length 2500mm, one inlet and one outlet PVC pipe, two manholes with covers fitted with stainless steel handles including installing in position with all necessary pipes and fittings and making connection with the waste line inclusive of cost of all excavation, backfilling, material and labour complete.

K.M.Joy (BID ID -3268479)

M S AJAYAKUMAR (BID ID -3268347)