IIP-CRDS-Repair works to cross shutter near Perambra branch canal at RBMC ch.32-850Km (2nos) and cross shutter near muriyad branch canal at RBMC ch.34-224 Km

Amount

Dismantling the Existing Shutter and demolishing and concreating embedded parts

od18263/2021_2022/MH : Dismantling of the canal shutter (Up to 2 Tonne weight ) /Hoisting Unit /Embeddedparts etc of the same and stacking at a distance of 100 meter including hire of machinery labour etc .complete as directed by the departmental officer at the site (Weight of the unserviceable shutters andembedded parts may be calculated as 60% and unserviceable hoisting unit as 80%)Rate analysis for 10Qtl erection

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

4.3.3 : Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

4.2.3 : Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Embedded parts

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od18267/2021_2022/MH : Fabrication and erection of Embedded parts for canal shutters ( up to 2 tonne weight ) and accessories asper approved specifications, drawings and directions of deptl officer at site including cost of labour,machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of materialalready supplied

Shutter

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od18270/2021_2022/MH : Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) Platform and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handlingcharges etc complete but excluding cost of material already supplied

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od18271/2021_2022/MH : Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platformincluding hand rails , ladder etc. for the same including . alignment correcting and settingcomplete including cost of all labour, machinery, incidental and conveyance , lead and liftcharges etc complete but excluding cost of materials already supplied

Hoist unit

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od18272/2021_2022/MH : Fabrication and supply of Structural steel Hoisting bridge ( Up to 2 tonne weight ) Platform and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handlingcharges etc complete but excluding cost of material already supplied

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od18273/2021_2022/MH : Providing EN-8 screw rod 7.5 tonne capacity4.00m lift screw hoist having one number of EN-8 screw shaft having lifting speed of around 5.00cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance.

od18274/2021_2022/MH : Providing of worm and pinion having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance.

od18271/2021_2022/MH : Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platformincluding hand rails , ladder etc. for the same including . alignment correcting and settingcomplete including cost of all labour, machinery, incidental and conveyance , lead and liftcharges etc complete but excluding cost of materials already supplied

Bidder Name

Fabtech Engineers and Contractors