Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-Finance HIMACHAL PRADESH HP | UNA | HIMACHAL PRADESH | 177202 | ₹2.9 L | L1 | Accepted-Finance Lowest |
| 2 | L2₹3.5 LRejected-Finance | ₹3.5 L | L2 | Rejected-Finance being second lowest |
| 3 | L3₹3.6 LRejected-Finance HIMACHAL PRADESH HP | UNA | HIMACHAL PRADESH | 177202 | ₹3.6 L | L3 | Rejected-Finance being Third lowest |
| Sl No | Description | Qty | Unit | Mitesh Thakur L3 | Dine Ram L1 | Nimat Ram L2 |
|---|---|---|---|---|---|---|
| 1.01 | Providing and fixing of submersible water pumping set of reputed make such as Kirloskar ,BS , KSB, Sabar , etc confirming to latest relevent BIS code.The pump should be fitted with free flow impellers of suitable alloy as per BIS 5659-1970 latest suitable for clear cold water with turbidity up to 50 PPM having greased packer bearings & shaft with bound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft confirming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of same make confirming to relevent BIS code latest with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand non vertical loads with minimum wear & tear.It should also be fitted with a device to take up expansion of water with heating of motor. The pump set should include water level guard errection clamps,cable clips & depth gauge etc. The pump should be suitable for operation on data given below:- Toatl Head 70 Rmt. Discharge 0.40 LPS | 1 | Each | 60,000 ₹60,000 | 50,000 ₹50,000 | 55,000 ₹55,000 |
| 2.00 | Providing and fixing of starter (direct on line) of 2.00 HP of standard make such as L&T /MEI /Havels/ AVON/ Crompton/ Asian for above pump set with suitable capacity installed on a wooden switch board fixed on a wall capable of mounting a voltameter 0 to 300 volts capacity and ampere meter of capacity 0 to 150 ampere of standard make as per the satisfaction of Engineer-in-charge. | 1 | Each | 23,000 ₹23,000 | 15,500 ₹15,500 | 25,000 ₹25,000 |
| 3.00 | Providing and fixing of water proof PVC 3 core, 2.5 sqmm as per IS-674-Part-II-1964 suitable for above pump set from starter to pump set subject to the approval of HPSEB authority as per the satisfaction of Engineer-in-charge. | 100 | Rmt. | 299 ₹29,900 | 600 ₹60,000 | 300 ₹30,000 |
| 4.00 | Providing and fixing of M.S Sheet box ( 0.60x0.30x.90 M) Fabricated with angle iron of four legs mounted in cement concrete 1:3:6 for electric metered starter switch and other accessories with locking arrangement complete. | 1 | each | 4,500 ₹4,500 | 9,500 ₹9,500 | 4,500 ₹4,500 |
| 5.00Providing , lowering and jointing in bore PP-R (Polypropylene randomcopolymer) pipe UV stablized and antimicroble fusion welded having thurmal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings complete ISI 15801-2010 & testing of joint complete in all leads and lifts as per direction of the engineer-in -charge. | ||||||
| 5.01 | 40 mm dia PN 20/SDR 6- Mono Layer | 100 | Rmt. | 300 ₹30,000 | 500 ₹50,000 | 300 ₹30,000 |
| 5.02 | 25 mm dia PN 20/SDR 6- Mono Layer | 150 | Rmt. | 400 ₹60,000 | 300 ₹45,000 | 400 ₹60,000 |
| 6.00 | Providing and fixing plain elbow 40 mm dia 3 layer PPR ( Polypropylene randomcopolymer) ( ISI Marked ) complete with in all respect and including all leads and lifts and entire satisfaction of engineer in charge. | 2 | Each | 1,100 ₹2,200 | 200 ₹400 | 1,100 ₹2,200 |
| 7.00 | Providing and fixing plain elbow 25 mm dia 3 layer PPR (Polypropylene randomcopolymer) ( ISI Marked ) complete with in all respect and including all leads and lifts and entire satisfaction of engineer in charge. | 10 | Each | 2,100 ₹21,000 | 60 ₹600 | 2,000 ₹20,000 |
| 8.00 | Providing and fixing threaded Union 40 mm dia 3 layer PPR (Polypropylene randomcopolymer) ( ISI Marked ) complete with in all respect and including all leads and lifts and entire satisfaction of engineer in charge. | 2 | Each | 7,900 ₹15,800 | 800 ₹1,600 | 8,000 ₹16,000 |
Tender Value
₹2.1 L
EMD Value
₹4,137
Closing Date
6 Apr 2026, 11:00 amClosed
EE Jal Shakti Division Larji
EE Jal Shakti Division Larji
Repair and Restoration of Rain Damages to WSS Nagladi Gusheni in Tehsil Banjar Distt Kullu (H.P)
2026_HPIPH_132686_1
EE Larji NIT NO- 15113-15212 dated 27.03.2026
Open Tender
Civil Works
30 days
Banjar
Please refer Tender documents.
2 documents required · 2 mandatory
₹350
EE Jal Shakti Division Larji
₹4,137
29 Apr 2026
28 Mar 2026
6 Apr 2026
28 Mar 2026
6 Apr 2026
28 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1.01 | Providing and fixing of submersible water pumping set of reputed make such as Kirloskar ,BS , KSB, Sabar , etc confirming to latest relevent BIS code.The pump should be fitted with free flow impellers of suitable alloy as per BIS 5659-1970 latest suitable for clear cold water with turbidity up to 50 PPM having greased packer bearings & shaft with bound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft confirming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of same make confirming to relevent BIS code latest with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand non vertical loads with minimum wear & tear.It should also be fitted with a device to take up expansion of water with heating of motor. The pump set should include water level guard errection clamps,cable clips & depth gauge etc. The pump should be suitable for operation on data given below:- Toatl Head 70 Rmt. Discharge 0.40 LPS | - | Each | - | - | itemH1Code1 |
| 2Providing and fixing of starter (direct on line) of 2.00 HP of standard make such as L&T /MEI /Havels/ AVON/ Crompton/ Asian for above pump set with suitable capacity installed on a wooden switch board fixed on a wall capable of mounting a voltameter 0 to 300 volts capacity and ampere meter of capacity 0 to 150 ampere of standard make as per the satisfaction of Engineer-in-charge. | ||||||
| 3Providing and fixing of water proof PVC 3 core, 2.5 sqmm as per IS-674-Part-II-1964 suitable for above pump set from starter to pump set subject to the approval of HPSEB authority as per the satisfaction of Engineer-in-charge. | ||||||
| 4Providing and fixing of M.S Sheet box ( 0.60x0.30x.90 M) Fabricated with angle iron of four legs mounted in cement concrete 1:3:6 for electric metered starter switch and other accessories with locking arrangement complete. | ||||||
| 5Providing , lowering and jointing in bore PP-R (Polypropylene randomcopolymer) pipe UV stablized and antimicroble fusion welded having thurmal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings complete ISI 15801-2010 & testing of joint complete in all leads and lifts as per direction of the engineer-in -charge. | ||||||
| 5.01 | 40 mm dia PN 20/SDR 6- Mono Layer | - | Rmt. | - | - | code1.06 |
| 5.02 | 25 mm dia PN 20/SDR 6- Mono Layer | - | Rmt. | - | - | code1.07 |
| 6Providing and fixing plain elbow 40 mm dia 3 layer PPR ( Polypropylene randomcopolymer) ( ISI Marked ) complete with in all respect and including all leads and lifts and entire satisfaction of engineer in charge. | ||||||
| 7Providing and fixing plain elbow 25 mm dia 3 layer PPR (Polypropylene randomcopolymer) ( ISI Marked ) complete with in all respect and including all leads and lifts and entire satisfaction of engineer in charge. | ||||||
| 8Providing and fixing threaded Union 40 mm dia 3 layer PPR (Polypropylene randomcopolymer) ( ISI Marked ) complete with in all respect and including all leads and lifts and entire satisfaction of engineer in charge. | ||||||
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
NIT.pdf
Tender Documents • 0.47 MB
Form8.pdf
Tender Documents • 1.43 MB
Terms.pdf
Tender Documents • 0.41 MB
BOQ_196210.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid