Construction of sitting room of on duty doctors at the OT section(5th floor), MS sheet grill gates and repairing of collapshible gates at Mortuary ward and urgent supply, installation and AMC of water purifier at different floors of Baruipur SSH Sou

Amount

Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed.

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Extra for using approved H.B netting in every third layer in 16 & 17 of subhead A above in any floor

Plastering (in wall , floor , ceiling etc. ) with sand and cement mortar including rounding off or chamfering corners as directed and racing out joints or roughening of concrete surface including throating and nosing & drip course where necessary. ( B ) With 1:4 cement morter, 15 mm thick plaster Fifth floor. In side.

Supplying,fitting & fixing 1st quality Ceramic tiles in walls to match with the existing work & 4nos of key stones (10mm) fixed with araldite at the back of each tiles & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface,if necessary or by synthetic adhesive & grout materials etc. (B) Wall With sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91kg/sqm & joint filling using white cement slurry @ 0.20kg/sqm. (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative

(b)Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5 mm thick) Qty Same as Inside Plaster

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Fifth Floor) i) Solvent based interior grade Acrylic Primer (a)Two Coat

Applying Acrylic Emulsion Paint of approved make and brand on wallsand ceiling including sand papering in intermediate coats including putty(to be done under specific instruction of Superintending Engineer) : (In Fifth Floor) (Two coats) i) Standard quality

Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc) 10-12 Micron thickness Annodizing film (unit wt of to Top & side frame @1.366 kg/m ; top rail @ 1.296 kg/m; bottom rail @ 1.974 kg/m; lock rail @ 1.590 kg/m; door vertical @ 1.412 kg/m; glazing clip @ 0.167 kg/m. )

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base (Hexagonal/ Round rod) (vi) 150 mm grip x 10 mm dia rod.

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (Oxidise) (vii) 100mm. X 75mm. X 3.5mm.

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (x) 300mm long x 12mm dia. bolt.

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. iv) 300mm x 19mm dia. bolt.

(A) Supplying Aluminium casted body hydraulic door closer as per I.S.I.

ii) Door stopper (Anodised aluminium)

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.

Reparing collapsible gate by cutting out all rivets as necessary re-assambling all members including welding pieces of channels,sraightening bent bars and rivetting with new rivets and fitting inposition and painting two coats.

Easing and oiling, cleaning collapsible gate and repairing to locking arrangements.

Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating)

a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. Ground Floor For Grill & Sheet priming multiply factor 2.2 and for CG 1.5

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Supply, Installation of water purifier with RO-filter, 50LPH, 50 litre storage tank capacity with Iron guard filter minimum 6 stage filteration system. 50 litre storage with Iron removal filter

One(01) year AMC of water purifier with RO-filter, 50LPH, 50 litre storage tank capacity with Iron guard filter minimum 6 stage filteration system.

OM INTERNATIONAL (BID ID -5977338)

SAMPURNA NET (BID ID -5977506)