Construction of Ground Floor of Govt. Sanskrit College at Sundernagar Distt. Mandi (H.P.)

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation, trenches or drains (not exceeding 1.5m (one point five metre) in width or 10 sqm (Ten squaremetre) on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m (one point five metre), including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m (Fifty metre). Ordinary Rock . Including entire carriage of materials in all leads and lifts and as per drawings and technical specifications of HPPWD and as per the direction of Engineer-in-Charge including all incidentals charges charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Providing and laying cement concrete mechanically mixed and vibrated (nominal mix) 1:4:8 (One cement : four coarse sand : eight graded/crushed stone aggregate) 40mm (forty millimetres) nominal size aggregates and curing complete excluding cost of form work in foundation and plinth. Including entire carriage of materials in all leads and lifts and as per drawings and technical specifications of HPPWD and as per the direction of Engineer-in-Charge including all incidentals charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level (nominal mix) : 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) and curing complete excluding cost of form work in foundation and plinth. Including entire carriage of materials in all leads and lifts and as per drawings and technical specifications of HPPWD and as per the direction of Engineer-in-Charge including all incidentals charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing (nominal mix) :1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size). Including entire carriage of materials in all leads and lifts and as per drawings and technical specifications of HPPWD and as per the direction of Engineer-in-Charge including all incidentals charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Providing and laying 50 mm (Fifty millimetre) thick fine dressed local stone flooring over 20 mm (Twenty millimetre) (average) thick base of cement mortar 1:5 (one cement : five coarse sand) with joints finished flush. In plinth Protection Including entire carriage of materials in all leads and lifts and as per drawings and technical specifications of HPPWD and as per the direction of Engineer-in-Charge including all incidentals charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm (fifteen into twenty centimetre) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement: three Sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm (forty millimetre) nominal size and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty millimetre) nominal size and finished with a floating coat of neat cement complete as per standard design.Including entire carriage of materials in all leads and lifts and as per drawings and technical specifications of HPPWD and as per the direction of Engineer-in-Charge including all incidentals charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish includingCentering and shuttering including strutting, propping etc. and removal of form work for Foundation, footing basis of columns etc. for mass concrete. Including entire carriage of materials in all leads and lifts and as per drawings and technical specifications of HPPWD and as per the direction of Engineer-in-Charge including all incidentals charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish includingCentering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.Including entire carriage of materials in all leads and lifts and as per drawings and technical specifications of HPPWD and as per the direction of Engineer-in-Charge including all incidentals charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish includingCentering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform. Including entire carriage of materials in all leads and lifts and as per drawings and technical specifications of HPPWD and as per the direction of Engineer-in-Charge including all incidentals charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish includingCentering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc. Including entire carriage of materials in all leads and lifts and as per drawings and technical specifications of HPPWD and as per the direction of Engineer-in-Charge including all incidentals charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST.