CONSTRUCTION OF NEW BUILDING OF WORKING WOMENSHOSTEL AT KAKKANAD-PHASE II FIREPROTECTION SYSTEM

Amount

Hydrant System

Supplying, installing, testing and commissioning of MS-C CLASS confirming to IS 1239 Pt - medium grade with painting(Two Coat of Epoxy primer and two coat of Signal red enamel paint to be apply),, suitable type of supports ( for above 50 mm dia, shall be fabricated by M.S. Channel / Angle / Flats etc), anchor fasteners, bolts nuts , clamps, "U" bolted,etc. Dummy plugs Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc. Dia - 100mm (Make: Jindal)

Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 16) slim seal standard lever operated type with required flanges, nuts, bolts with supervisory switch / limit switch assembly complete set. - Dia - 100mm Make:Karthar

Supply, installation, testing and commissioning of C.I. Non-Return Valve slim seal type with required flanges, nuts & bolts, gasket etc. complete Dia - 100 mm Make:Karthar

Supply, installation, testing and commissioning of Hydraulic Hose Reel drum completed with swinging type drum with 19mm dia Rubber braided hose of 30M. length and Shut off nozzle as per IS:884, with necessery fittings etc. complete.Make:MONSHER

Supply, installation, testing and commissioning of single acting ball valve with screwed inlet 25mm- make:KARTHAR

Supply, installation, testing and commissioning of single acting Air Release Valve with screwed inlet 25mm dia etc- Make:ATTOM

Supply, installation, testing and commissioning of Fire Brigade Inlet connection with 2 WAY of 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arranged on 100 mm dia.etc. Pipe manifold shall be connected to wet riser main. Make:Karthar

Pump & accessories

Supply, Installation, Testing and Commissioning Electrically driven Mono block Terrace pump of capacity 450LPM with all the necessary accessories operating on 3 Ph. 50 Hz. 415 V AC supply including foundation, bolts etc. complete, The Pump set shall be of 5HP- Make:KIRLOSKAR

Supply, installation, testing and commissioning of Pressure Gauge with all accessories. Make:Guru

Supply, installation, testing and commissioning of Pressure Switch for automatic operation.Make:Danfoss

Fire Extinguishers

Supplying, and fixing of ABC Storred pressure type fire extinguisher with 4 Kgs Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, discharge hose, wall mounting bracket etc

Supplying, and fixing of MODULAR TYPE FIRE EXTINGUISHER WITH 5 Kgs Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, discharge hose, wall mounting bracket etc.Make:ANDEX

FIRE ALARM SYSTEM

Supply, installing, testing and commissioning of Micro processor based Main 2 zone Fire alarm control panel of following capacity, with visual LED indications for fire / fault alarms, signals and should have stage alarm facility with maintenance free battery back up for 24 hours normal operation and 15 minutes alarm operation. The panel shall be fabricated by M.S. sheet and powder coated both inside & out side, door shall be glass fronted type with locking arrangement, as per specification.

Fire Signages

Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.- FIRE EXIT

FIRE DUCT

NO SMOKING

FIRE TANK & OTHERS

SUPPLY AND ERRECTION OF 5000LTR FIRE TANK. WITH 4MM MILD STEEL PLATE, 40MM X 40MM X 5MM ANGLE FOR INNER SUPPORT AND 100MM X5MM ‘C’ CHANNELS FOR BASE FRAME. APPLYING ONE COAT OF EPOXY PRIMER FOR WEATHER PROTECTION

STAIRECASE FABRICATION

EMERGENCY LIGHT ARRANGEMENT

SITC OF INVERTER

SITC OF BATTERY

GOVT CHALAN

Exclusive of GST and Inclusive of all charges for getting Fire NOC approval from Fire and Rescue Department with all Documents

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate should be inclusive of Insurance,Transportation, delivery and installation cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD specification and direction of Engineer at site.

5.PLUMBING & SANITARY FITTINGS: Note: Make of Water supply and sanitary items: Best branded ISI make Jaquar, Cera, Hindware, Parryware or eq. in the order of pref. Water pipe: Supreme, Finolex or eq. with IS and all fittings with IS.

6.ELECTRICAL: Note: Rate should be inclusive of preparation of schematic diagram and getting approval from KSEB/Electrical Inspectorate. Statutory fees paid to KSEB/EI shall be paid by us separately.

Make of Electrical equipments/materials

All electrical materials/equipments shall be of best branded items with ISI, strictly as per schedule specification

7. ACRYLIC SMOOTH EXTERIOR PAINT/ SYNTHETIC ENAMEL PAINT/WHITE CEMENT BASED PUTTY/ CEMENT PRIMER: Make: Asian, Berger, Nerolas or eq. in the order of pref.