Renovation of Mahra Head of Drain No. 8 and DD No. 8

Amount

Earth work in excavation by mechanical means (Hydraulic excavatior)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. HSR item No. 4.12.1

Centering and shuttering including strutting, propping etx. And removal of form work for: foundations, footings, bases for columns HSR item No. 6.30.1

M-10 grade plain cement concrete (cement content considered @240 kg/cum HSR item No. 6.22.23

First class brick work 1:3 in foundation and plinth as per HSR item No. 15.6.1

10 mm thick cement plaster 1:3 (1cement:3fine sand) HSR item No. 11.4.2

Applying priming coat with ready mix oxide zine cromate primer of approved brand & manufacture on steel galvanized iron/steel works HSR item No. 11.68.3

Painting the wooden/metal surface with synthetic enamel paint of approved brand manufacturer to given us as even shades (two or more coat on new work) HSR 11.82.1

White wash with lime to given an even shades new work three or more coats HSR item No. 11.61.1

Providing and applying POP putty of 2mm thick over plaster surface to prepare the surface even & smooth complete HSR item No. 11.59

Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, using galvanized wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS: 1568, for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge (Note:- Butt hinges and necessary screws shall be paid separately) HSR item No. 12.20.2

Providing and laying 60mm thick ISI marked interlocking paver blocks conforming to IS 15658:2006/IRC SP 63:2004 of all shapes and colours in design mix cement M35 over the bed of 30 mm thick fine sand complete in all respect. HSR 17.69.3

Retaining walls, return walls, walls (any thickness) sqm including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. HSR 6.29.3

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for rainforcement cement concrete work (note: Cement content considered in this item is @ 330 Kg per cum HSR 6.25.1

Steel rainforcement for RCC work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level Thermo-Machanically Treated bars of grade Fe-500D kg or more HSR item No. 6.34.6

Providing and fixing heavy duty winch gear assembly (semi northen type with 3 winch gear assembly & 3 nos. profiles steel rope 22mm complete with U cbumps etc. for gate No. 3 of Drain No. 8

Turn buckles & U cbumps heavy duty

alingment & re-setting exclators drums rope & profile levelling

Re-wasing complete gear box assembly & exclator assembly & re-lubricating with oil & grease complete unit including revisioning of winch gear assembly

Providing & welding conopy sheet of gear boxed 2 nos.

Cutting old seal & seat i/c nut belds with the help of hand grinder & providing & fixing new seals & sents i/c the cost of all nut bolt & stripes Musical side sealing rubber neoprene quality

Flat neoprence rubber sheet 100mm

Sh. Deepak Govt. Contractor, Rohtak