Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAccepted-Finance | L1 | Accepted-Finance Lowest Vendor | |
| 2 | L2₹38.1 L+₹6.7 L (21.5%)Rejected-Finance | L2 | Rejected-Finance Being Not L1 | |
| 3 | L3₹42.8 L+₹11.4 L (36.5%)Rejected-Finance D NO 4 96 40 27 FLAT NO 307 GREEN CASTLE APARTMENT GOPALAKRISHNA NAGAR SUJATHANAGAR VISAKHAPATNAM 530 051 | VISAKHAPATANAM | ANDHRA PRADESH | 530051 | L3 | Rejected-Finance Being Not L1 | |
| 4 | L4₹44.1 L+₹12.7 L (40.6%)Rejected-Finance D NO 65 6 500 2 MULAGADA COLONY HIMACHALNAGAR GAJUWAKA VISAKHAPATNAM 530 026 | VISAKHAPATANAM | ANDHRA PRADESH | 530026 | L4 | Rejected-Finance Being Not L1 | |
| 5 | L5₹48.6 L+₹17.2 L (54.9%)Rejected-Finance D NO 10 36 3 2 FLAT NO N 1 DASARATHA ENCLAVE RAM NAGAR VISAKHAPATNAM 530 002 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530002 | L5 | Rejected-Finance Being Not L1 |
| Sl No | Description | Qty | Unit | aswitha engineering works L2 | MSN ENGINEERING WORKS L3 | M/s DIAMANTO VERTICALS L1 | R AND A ASSOCIATES ENGINEERS CONTRACTORS L6 | eldi techs L5 | ANAND ENTERPRISES AND ENGINEERS L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Servicing/maintinance of multiple section of LT Panel board in one substation comprising minimum up to 10 Nos ACBs/ MCCBs/SDFs ,busbar chamber, swich gear chamber, metering chamber cable termination/tray chamber after opening front/top/side/back cover by using forced air pressure and brushes, cleaning of all dust/durt, complete cleaning of out side surface of panel board using suitable cleaning agents, tighting of all nuts & bolts of busbar/switchgear/cable terminals, repair/replacement to defective metering wiring from ACB/MCCB/CT to meter and replacement of defective meters, CTs, indicator lamp, metering terminal blocks, MCB, replacement of defective aluminum cable lugs, nuts-bolts-washers, replacement of defective Panel knob/door knob and hinges all as specified and directed . | 5 | Each Job | 2,500 ₹12,500 | 5,000 ₹25,000 | 34,500 ₹1,72,500 | 2,000 ₹10,000 Lowest | 8,500 ₹42,500 | 4,050 ₹20,250 |
| 1.01Note:- (i) Panel Meter, indicator lamp, MCB,busbar and CT will be measured and paid seperately as supply only. (ii) required aluminium cable lugs, metering cables and nuts-bolts-washers shall be inclusive of quoted rate. (iii) Servicing/maintinance of ACBs measured seperatelly. (iv) cable connection disconnection included inclusive of quoted rate. | |||||||||
| 2.00 | All as per item No. 1.00 above, but comprising ACBs /MCCBs/SDFs up to total 15 Nos | 6 | Each Job | 4,500 ₹27,000 | 6,000 ₹36,000 | 51,750 ₹3,10,500 | 2,000 ₹12,000 Lowest | 7,500 ₹45,000 | 5,850 ₹35,100 |
| 3.00 | All as per item No. 1.00 above, but comprising ACBs /MCCBs/SDFs up to total 21 Nos | 8 | Each Job | 8,800 ₹70,400 | 7,000 ₹56,000 | 51,750 ₹4,14,000 | 2,000 ₹16,000 Lowest | 8,200 ₹65,600 | 8,250 ₹66,000 |
| 4.00 | Servicing, repair, maintinance of Air Circuit Breaker 630 Amps to 3200 Amps capacity by drawing out movable unit, forced air cleaning of movable and fixed unit, decarbonize breaker contracts and checking for any defects due to any flush/loose contact, cleaning of all fixed and moving contact point, terminal connection points with CTC, replacement of defective parts and re-fixing ACB, cables completes all as specified and directed.
Note: (a) required male/female ACB contacts, trip coils, closing coils, electronic protection unit will be measured as supply only. (b) all cleaning agents are included in the quoted rate. (c) cable connection and disconnection are included in the quoted rate. | 15 | Job | 2,700 ₹40,500 | 4,000 ₹60,000 | 3,450 ₹51,750 | 600 ₹9,000 Lowest | 2,300 ₹34,500 | 3,100 ₹46,500 |
| 5.00 | Supply only fixed contract of ACB 630A to 3200A all as specified and directed. | 2 | Each | 1,513 ₹3,026 | 2,000 ₹4,000 | 3,450 ₹6,900 | 2,100 ₹4,200 | 28,000 ₹56,000 | 1,400 ₹2,800 Lowest |
| 6.00 | Supply only Moving contract of ACB 630A to 3200A all as specified and directed. | 2 | Each | 3,342 ₹6,684 | 2,100 ₹4,200 | 3,450 ₹6,900 | 1,800 ₹3,600 Lowest | 31,500 ₹63,000 | 2,700 ₹5,400 |
| 7.00 | Supply Only Electronic protection unit of ACB 630A to 3200A all as specified and directed. | 2 | Each | 15,302 ₹30,604 | 2,200 ₹4,400 Lowest | 23,000 ₹46,000 | 6,000 ₹12,000 | 23,000 ₹46,000 | 7,630 ₹15,260 |
| 8.00 | Supply Only shunt trip coil of ACB 630A to 3200A all as specified and directed. | 2 | Each | 6,676 ₹13,352 | 2,000 ₹4,000 Lowest | 3,000 ₹6,000 | 4,200 ₹8,400 | 4,600 ₹9,200 | 7,050 ₹14,100 |
| 9.00 | Supply Only closing coil ACB 630A to 3200A all as specified and directed. | 2 | Each | 6,676 ₹13,352 | 2,200 ₹4,400 Lowest | 3,000 ₹6,000 | 4,200 ₹8,400 | 4,600 ₹9,200 | 7,050 ₹14,100 |
Tender Value
₹48.1 L
EMD Value
₹96,300
Closing Date
30 Jul 2025, 6:00 pmClosed
GE (I) DM Visakhapatnam
GE (I) DM Visakhapatnam
LOAD TESTING OF PBS/CP, REPLACEMENT OF DEFECTIVE LT CABLES, CABLE END TERMINALS, REFRESH ALL CABLE CONNECTIONS AT CP PB JB LT PANELS AND ALLIED WORKS AT JETTY AREA AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) (DM) VISAKHAPATNAM
2025_MES_700831_2
8252/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Naval Dockyard Visakhapatnam
As per tender documents
8 documents required · 8 mandatory
₹500
GE (I) DM Visakhapatnam
₹96,300
Yes
7 Oct 2025
2 Jul 2025
1 Aug 2025
2 Jul 2025
30 Jul 2025
16 Jul 2025
Amount
Servicing/maintinance of multiple section of LT Panel board in one substation comprising minimum up to 10 Nos ACBs/ MCCBs/SDFs ,busbar chamber, swich gear chamber, metering chamber cable termination/tray chamber after opening front/top/side/back cover by using forced air pressure and brushes, cleaning of all dust/durt, complete cleaning of out side surface of panel board using suitable cleaning agents, tighting of all nuts & bolts of busbar/switchgear/cable terminals, repair/replacement to defective metering wiring from ACB/MCCB/CT to meter and replacement of defective meters, CTs, indicator lamp, metering terminal blocks, MCB, replacement of defective aluminum cable lugs, nuts-bolts-washers, replacement of defective Panel knob/door knob and hinges all as specified and directed .
Note:- (i) Panel Meter, indicator lamp, MCB,busbar and CT will be measured and paid seperately as supply only. (ii) required aluminium cable lugs, metering cables and nuts-bolts-washers shall be inclusive of quoted rate. (iii) Servicing/maintinance of ACBs measured seperatelly. (iv) cable connection disconnection included inclusive of quoted rate.
All as per item No. 1.00 above, but comprising ACBs /MCCBs/SDFs up to total 15 Nos
All as per item No. 1.00 above, but comprising ACBs /MCCBs/SDFs up to total 21 Nos
Servicing, repair, maintinance of Air Circuit Breaker 630 Amps to 3200 Amps capacity by drawing out movable unit, forced air cleaning of movable and fixed unit, decarbonize breaker contracts and checking for any defects due to any flush/loose contact, cleaning of all fixed and moving contact point, terminal connection points with CTC, replacement of defective parts and re-fixing ACB, cables completes all as specified and directed. Note: (a) required male/female ACB contacts, trip coils, closing coils, electronic protection unit will be measured as supply only. (b) all cleaning agents are included in the quoted rate. (c) cable connection and disconnection are included in the quoted rate.
Supply only fixed contract of ACB 630A to 3200A all as specified and directed.
Supply only Moving contract of ACB 630A to 3200A all as specified and directed.
Supply Only Electronic protection unit of ACB 630A to 3200A all as specified and directed.
Supply Only shunt trip coil of ACB 630A to 3200A all as specified and directed.
Supply Only closing coil ACB 630A to 3200A all as specified and directed.
Supply only indication lamps (LED type) red, yellow and blue in colours of 22.5 mm dia to monitor on LT panel board suitable for 240 V AC supply and taking down unserviceable indication lamps all as specified and directed. Make :- Siemens or C&S/schneider/ABB
Supply only metering current transformer of capacity 1600 to 2500/5 Amps class-1, 15 VA, all as specified and directed.
Supply only metering current transformer of capacity upto 800/5 Amps, Class-1, 12.5VA, all as specified and directed.
M & L for ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 4000 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 3200 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 2500 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 2000 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 1600 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 1000 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 3 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 4000 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 3 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 3200 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 3 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 2500 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 3 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 2000 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 3 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 1600 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 3 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 1250 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 3 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 1000 Amps and taking down unserviceable all as specified and directed.
M & L for ACB 3 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 800 Amps and taking down unserviceable all as specified and directed.
M & L for MCCB 3 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 630 Amps with breaking capacity 50 KA and taking down unserviceable all as specified and directed.
M & L for MCCB 3 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 400 Amps with breaking capacity 36 KA and taking down unserviceable all as specified and directed.
M & L for MCCB 3 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 250 Amps with breaking capacity 36 KA and taking down unserviceable all as specified and directed.
Supply and fix heat shrikable cable end termination of sizes 300/ 400 sqmm, 3.5 core complete all as specified and directed.
Supply and fix heat shrikable cable end termination of sizes 185/240 sqmm, 3.5 core complete all as specified and directed.
Supply only Heat Shrink sleeve outer protection insulating tube (Coated) single core, for application range 9-29mm ,complete all as specified and directed.
Supply only coloured Heat Shrink sleve busbar insulation tube single core, for application range upto 150 mm , complete all as specified and directed.
Supply only Busbar anodised aluminium of as per site requirement sizes including required drilling holes for fixing with other bus / cable connections complete all as specified and directed.
Supply only Busbar anodised copper of as per site requirement sizes including drilling holes for fixing with other bus / cable connections complete all as specified and directed.
Supply and fix MS cable support structure made with ISA 75x75x8mm grouted to gallery wall with angle fastner bolt of dia not less than 16 mm at interval of 300 mm fixing of cross support with cadmium coating bolts not less than 12 mm dia,painting the MS structure with one coat of red oxide primer and two coat of synthetic enamel paint complete including taking out old UNSV cable support structure from the jetty gallery complete all as specified and as directed.
M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmens complete all as specified and as directed including taking out of old unserviceable MS cable cover/support structure.Grade of steel Fe 410 -W (Gde E- 250) quality -A structure complete all as specified and directed.
M&L for painting of outer surface of multiple section of complete LT Panel board size up to 5.5 m x 3.2 in substation Panel board comprising ACBs/MCCBs/SDFs ,busbar chamber, swich gear chamber, metering chamber cable termination/tray using one coat of synthetic enamel paint after preparation of surface, writing letter and fixfing LT panel board surface showing incoming and outgoing capacity in Amps and feeder name of letter five not less than 30 X 50 MM, providing protection cover to all metering equipment, panel meters, switchgears, cleaning of all meters and switch gears complete all as specified and as directed
Cleaning of cable duct of size 1.2 x 1.0 by removing out all mud, soil, waste materials and disposal of waste materials outside Dockyard area complete all as specified and directed
Supply and fix line diagram of substation panel to Jetty panel and cope point with blue background and white letter made with retro reflective sheet and pasted on 2 mm thick aluminium sheet of total size 0.45 m high X 5.5 mtr long fixed to MS fabricated structure with welding, nuts, bolts complete including dismantling taking old unserviceable glow sign board of any type complete all as specified and directed.
Supply and fix Electric shock & its Treatment board for substation in three language ( Hindi, English & telgu) sheet and pasted on 2 mm thick aluminium sheet of total size 1.0 m high X 1.2 mtr long fixed to MS fabricated structure with welding, nuts, bolts complete including dismantling taking old unserviceable glow sign board of any type complete all as specified and directed.
Load testing of PBs,Cope point and voltage stabilizer installed at various jetty areas, Gallaries, substations using artificial electrical rectifier load bank of capacity from 1000 Amps to 2000 Amps including necessary required cable length input out put connection for testing and checking Voltage drop will rectified by checking cable size and loose connection, checking and record power factor to maintain 0.9 to 01, Load testing will be carried out in three hours contenusly for 25%,50 %, 75% and 100% for one hours each objects respectively and all record will maintain and sheet submited to department for rcord all as specified and directed. Note :- (i) Artificial rectifier load bank shall be provided by Contarctor. (ii) Required man power for collection/handling and shifting from testing place to another place including work shall be arrange by the contractor. (iii) Required cable size and length for testing shall be arrange by the contractor.
Servicing/maintenance of voltage stabilizer of capacity 1000 KVA to 1500 KVA by forced air cleaning of movable and fixed unit, decarbonize busbar chamber and checking for any defects due to any flush/loose contact. Cleaning of all fixeddd and moving contact terminal connection points with CTC, replacement of defective cables complete all as specified and directed. Note :- All cleaning agents are included in the quoted rate.
Supply and fix dimmer starter for regulating voltage of voltage stabilizer capacity 1000 KVA to 1500 KVA, 3 phase, 415 volts, 50 Hz and taking out old unserviceable one complete all as specified and directed. Make :- Servo max/Jindal
Supply and fix forward/reversible synchronous motor of torque 20 kg capacity for voltage stabilizer of capacity 1000 KVA to 1500 KVA, 3 Phase , 415 volts, 50 Hz and taking down old unserviceable one complete all as specified and directed.
S&F PCB of networking uit with complete resister and capaxitor for voltage controlling/regulating for voltage stabilizer of capacity 1000 KVA to 1500 KVA 3 phase, 415 volts, 50 Hz and taking down old unserviceable all as specified and directed
S&F PCB of electronic micro procssed based controller suitable for voltage stabilizer of capacity 1000 KVA to 1500 KVA 3 phase, 415 volts, 50 Hz and taking down old unserviceable one complete all as specified and directed
S&F frequency meter relay high/low adjustable 96mmx96mm suitable for voltage stabilizer of capacity 1000 KVA to 1500 KVA 3 phase, 415 volts, 50 Hz and taking down old unerviceable one complete all as specified and directed.
aswitha engineering works (BID ID -3366444)
MSN ENGINEERING WORKS (BID ID -3368089)
ANAND ENTERPRISES AND ENGINEERS (BID ID -3377576)
eldi techs (BID ID -3376896)
R AND A ASSOCIATES ENGINEERS CONTRACTORS (BID ID -3369106)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .