P/o 2 Nos Supporting wire for 260 Feet high Communication Pole at Jutogh Cantt Distt Sml

Amount

Sub-Head : Earth Work

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge.

All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50 m and lift up to 1.5m, as directed by Engineer-in-Charge.

Ordinary rock

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials.

All kinds of soil.

Ordinary or hard rock.

Sub-Head : Concrete Work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size)

Sub-Head : Reinforced Cement Concrete

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Sub-Head : Steel Work

Supplying following approved quality fixtures for long Pole type Communication Tower support all complete as per the direction of Engineer-in-charge.

D-Saddle ( 25 mm Dia D- Hook with nut bolt )

25 mm dia MS Chain Link

25 mm dia GI Guy Wire / Supporting wire

MS Adjustable Piece for Tightening 25 mm to 32 mm dia GI Supporting Wire

Making arrangement for connecting and tightening 2 nos 25 mm dia Steel Guyed / supporting Stay wire ( as on site connected with 260 Ft pole at two levels ) by providing and fixing new 25mm steel Guyed/ supporting stay wire by fixing minimum 3 nos 25 mm dia D-Saddle ( D Hook with locking nutbolt) on each side of Guyed / supporting stay wires including tighetening of wires by mechanical pulling arrangement inside foundation by 25 mm dia MS Chain link all complete as per direction of Engineer-in-charge. (Note :- D-Saddle ( D Hook) , MS Guyed Wire / supporting Stay, MS Adjustable Piece for Tighetening of wire , 25 mm dia chain link shall be paid for separatley but rate of this item is inclusive of labour required for fixing all these items / fixtures )