Kota Division: Provision of Track Machine siding with facilities (11 Station - JHW, RDT, ALNI, LKE, URML, SNAR, THEA, MLGH, PSLI, MXL, FSP), KOTA-COR Section - Improvement of TTM siding at Bundi and MLGH station and Upgradation / renovation of TTM Rest House at BUDI and MLGH, Providing New Office Building for CMI, TI, ARME & USFD etc on replacement basis at SGZ station and provision of New Trade union Office on replacement basis at SGZ & VMA Station and Providing to Subordinate Rest House SGZ & TTM Rest House at CMU, VMA & Improvement / Repairs to SRH/TTM Rest House at MEP under ADEN/SGZ.

Supply and erection of octagonal galvanized steel pole 5 mtr long with foundation bolts, single arm type etc. with junction box and cover complete. (a)Pole ID-BOP 5030 (b)Height-5 01 meter ©Top-70mm (d)Bottom-130mm (e)Thickness-3mm (f)Base plate-200x200x12 mm (g)Foundation bolts-PCD-200 : bolt size 4x16mmx600mm long (IS:1367,Part-III) (h)Single arm brackets (i) Foundation size (WxLxH) 500x500x1000 mm. Note: -1. Octagonal steel poles with foundation bolts should be confirming to std. 35 grade. Base Plate IS 226/IS 2062. Grade of PCC should be M-20 2. All material will be supplied by contractor.

Supply and installation of LED Street light fitting 30 watt suitable for 230 V AC.

Supply & fixing of 'B' class GI pipe fitting made for 40mm dia for fixing of CFL fittings with all required accessories i.e. MS clamps, nut bolt washers etc.

Laying of circular armoured XLPE LT cable size 4 core aluminum conductor 1100 volt with connection etc. (Note: Cable will be supplied by Railway.)

Digging of trench in pucca trench in yard /platform 50cm. deep and 35cm. wide including replaster on surface by cement concrete after laying of cable.

Digging of trench in all type of soils/road cutting 100 cm. deep and 50cm. wide including supply and laying of "B" class bricks on both side & top of the cable and refilling the trench after laying of cable.

Supply of material, providing and laying of RCC hume pipe 6" dia (150mm) as per IS: 456-1978 or latest in existing trench under Railway track including jointing and all required accessories etc.

Drilling of Horizontal bore below track/road by pushing method for laying of HDPE/DWC pipe of various size.

Supply of material, providing, commissioning and laying of DWC/HDPE pipe of 160/138 mm dia cabling under road/track.

Supply, laying, fixing of heavy-duty ISI marked B class GI pipe of 3.65 mm wall thickness & 50 mm diameter to be laid along the wall or floor with proper galvanized clamp through the wall or underneath the floor in cement concrete.

Supply of material & providing GI. pipe earthing arrangement by digging the pit as 11 per DRM/KTT's Drg. No. 01913EL/R1 or latest complete in all type of soils including rocky area. Earth value will be taken by the contractor in the presence of Railway representative and written on the earth pit by the contractor.

Supply, fabrication, installation, testing & commissioning of LT distribution board 12 fabricated With M.S. angle size 40x40x3mm with door & locking arrangement duly painted red oxide & powder coated enamel Paint consisting of following items. Incoming - MCCB TPN 100 Amp. Breaking cap. 35 KA - 01 No. Outgoing - MCB 63 Amp. TPN - 02 Nos.

Supply, Erection, Testing and Commissioning of 63 Ampere, 5 pin 415 VAC Industrial Plug and socket Distribution Box with 63 Ampere, four pole, C curve, 10 KA MCB. All should be complete in all respect.

Supply, Erection, Testing and Commissioning of 32 Ampere, 3 pin 415 VAC Industrial Plug and socket Distribution Box with 32 Ampere, two pole, C curve, 10 KA MCB. All should be complete in all respect.

Supply, Erection, Testing and Commissioning LT junction Box /Bus bar box of four copper bus bar having rating 100 Amps for outdoor usage with nut & bolt complete in all respect.

Supply & fixing of LED tube light Box type Luminaire 20 watt complete with tube suitable for 230 V AC.

Supply and fixing of BEE 5 star rated energy efficient BLDC ceiling fan, sweep size: 1200mm, complete with wiring connection etc. as per detailed specification attached.

Supply, Fixing, testing & commissioning of exhaust fan sweep size 300 mm suitable for 230-volt AC 50 Hz complete with accessories.

Supply, Fixing, testing & commissioning of Bulkhead fitting wire mesh suitable for 7/8/9 watts LED lamp with LED lamp 07 watts suitable for 230 volts AC.

Supply of material and wiring, testing and commissioning of light/fan point in PVC 20 rigid conduit pipe size 19/20 mm medium class with 1.5 sqmm multistrand PVC insulated copper conductor cable confirming to IS: 694-1990 or latest amd 2.5 sqmm PVC insulated copper wire coloured for earthing along with connections etc.

Supply of material and wiring, testing and commissioning of sub main phase and 21 neutral in PVC rigid conduit pipe size 25 mm dia. medium class mark with 4 sq.mm. PVC insulated single core multistransd copper cable with 2.5 sq.mm. PVC insulated copper wire green coloured for earthing and connection etc. Separate PVC pipe to be provided for this item.

Supply of materials and fixing of main distribution box 4+2 way suitable for housing MCB and ELCB with neutral link. Distribution box should be fixed on wooden taper plug or steel fasteners etc. with supply and fixing of 01 no. MCB SPN 16 Amp. breaking capacity 10 KA and 02 Nos. MCB SP 6-32 Amp. breaking capacity 10 KA with 01 No. ELCB 25 Amp. DP, sensitivity 30 m.Amp. and connections etc. The distribution board is to be fixed on wall with the help of rag bolt /fastener or on board and connecting the same with suitable size of wire duly crimped lugs.

Supply & fixing of Energy efficient 5 star rated submersible pump motor set 150mm dia, Head 214-110 mtr., Motor rating 7.5 H.P., Discharge 50-150LPM ,3 phase 415-volt AC Confirming to IS NO.-8034/1989 & motor conf. to IS NO.-9283/1995 or latest.

Supply of Energy efficient 5 star rated submersible pump motor set 150mm dia, Head 214-110 mtr., Motor rating 7.5 H.P., Discharge 50-150LPM ,3 phase 415-volt AC Confirming to IS NO.- 8034/1989 & motor conf. to IS NO.-9283/1995 or latest.

Supply, installation, testing & commissioning of Energy saver VOS pump motor set Water Lubricated ISI mark 7.5H.P.,2 stage, head-30 mtr., discharge10 LPS delievey size outlet 63 mm confirm to IS no. - 14220 and 1994 or latest.

Supply of Energy saver VOS pump motor set Water Lubricated ISI mark 7.5H.P.,2 stage, head-30 mtr., discharge10 LPS delivery size outlet 63 mm confirm to IS no. - 14220 and 1994 or latest.

Supply and fixing of star-delta starter panel board suitable for 7.5 HP to 20 HP submersible pump motor set 3 phase 415 volt AC complete as per following specification :-(1)push button with light 230V-02 nos. (2) Auto time switch 16 amp 230 V -01 nos. (3) single phase preventor vsp2 415v - 01 nos. (4) Digital ampere meter with selector switch - 01 nos. (5) Digital voltmeter 500V -01 nos (6) MCCB 4 pole breaking capacity 63 AMP. - 01 nos. (7) Digital hour meter 27 230 V - 01 nos (8) HRC fuse unit 63 A complete - 03 nos. (9) electronic motor protection relay 5-60 amp.CSMPA@45<45@T,60A,220 VAC - 01 nos. (10)two way toggle switch 10 amp for manual auto - 01 nos. (11) star delta timer 0-60 sec. - 01 nos. (12) 03 pole contactor 70 amp 3 phase with aux. block (2 NO+2 NC) - 03 nos.(13) CT 50/5 per unit - 03 nos. (14) Control fuse - 03 nos. (15) Water level control guard of 3 prode system - 01 nos. (16) Average dimension 640X500X290 mm.(17) LED indicating lamp for motor on, motor trip & RYB phase indicator - 05 nos. (NOTE :- ALL SWITCH GEAR TO SEPARATE )

Supply & fixing of Energy efficient submersible pump motor set 5 HP 3 Phase, 415 olt AC, 50 Hz, Head Range 62-170 Mtr., Discharge 167-33 LPM (V4), Confirming to IS NO.-8034/2002 or latest.

Supply of Energy efficient submersible pump motor set 5 HP 3 Phase, 415 olt AC, 50 Hz, Head Range 62-170 Mtr., Discharge 167-33 LPM (V4), Confirming to IS NO.-8034/2002 or latest.

Supply of Directon Line Starter Panel 5 HP to 7.5HP three phase 415-volt AC, Powder Coated 18 SWG Sheet Steel Enclouser with PU Gasket Duly Wired and Locking Arrangement with key and Two side ventilation Louvers

Installation, testing &commissioning of Direct On-Line Starter Panel 5HP to 7.5 HP three phase 415-volt AC, Powder Coated 18 SWG Sheet Steel Enclouser with PU Gasket Duly Wired and Locking Arrangement with key and Two side ventilation Louvers

Supply, installation, testing & commissioning of Energy efficient ISI mark submersible pump motor set 3 HP/23 stage, 220 Volts, H/range 71-136 mtr, discharge - 100 - 33 LPM, Del. 38/40 mm suitable for 100 mm dia bore well, water lubricated type as per expanatory notes.

Supply of Energy efficient ISI mark submersible pump motor set 3 HP/23 stage, 220 Volts, H/range 71-136 mtr, discharge - 100 - 33 LPM, Del. 38/40 mm suitable for 100 mm dia bore well, water lubricated type as per expanatory notes.

Supply & fixing of control starter panel with voltmeter 0-300 V, Ammeter 0-30 Amp., indicators, On-Off push button, motor protection overload relay 17-24 Amp., contactor 25 Amp. & suitable for 03 HP single phase submersible motor pump set with starting and running capacitor.

94.06 Supply, erection, testing and commissioning of PVC insulated flat three core flexible copper industrial cable for submersible pump motor set 1.1 K.V. grade nominal area of conductor 4.0 sqmm as per latest relevant IS: 694 or latest.

Supply, erection, testing and commissioning of PVC insulated flat three core flexible copper industrial cable for submersible pump motor set 1.1 K.V. grade nominal area of conductor 6.0 sqmm as per latest relevant IS: 694 or latest.

Supply & fixing of HDPE Pipe outer diameter 63 mm, material grade PE-63, Pressure- 10 PN, ISI Mark, IS: 4984-2016 or latest complete with SS hose nipple and nut bolts etc.

Supply & fixing of HDPE Pipe outer diameter 50 mm, material grade PE-63, Pressure- 10 PN, ISI Mark, IS: 4984-2016 or latest complete with SS hose nipple and nut bolts etc.

Supply & fixing of HDPE Pipe outer diameter 40 mm, material grade PE-63, Pressure- 10 PN, ISI Mark, IS: 4984-2016 or latest complete with SS hose nipple and nut bolts etc.

Supply & fixing of Poly Propylene rope 3 strand hawser laid and 8 stand plited size 16 mm dia Conf. to IS: 14929-2001 along with 42 nos. hardware to secure the complete pump motor to prevent it from falling down in the borewell breaking capacity 3770 Kgf plus minus 6 percent.

Supply & fixing of MCB DP 16/25/32Amp with Box.

Supply of Stranded compacted circular aluminium conductor A2XFY conductor screened with extruded , semi conducting compound XLPE insulated screened with extruded semi 42 conducting compound in combination with copper tape (0.3 kA to 1 sec) core laid up inner sheath (ST-2) PVC galvanized steel strip armoured and overall PVC sheathed black cable HT cable size 3 core x 70 sqmm suitable for 11 kV(E) 6.6 kV (UE) confirming to IS 7098(Part-II) 1985 /with latest amendments.

Laying, testing and commissioning of Stranded compacted circular aluminium conductor A2XFY conductor screened with extruded , semi conducting compound XLPE insulated 43 screened with extruded semi conducting compound in combination with copper tape (0.3 kA to 1 sec) core laid up inner sheath (ST-2) PVC galvanized steel strip armoured and overall PVC sheathed black cable HT cable size 3 core x 70 sqmm suitable for 11 kV(E) 6.6 kV (UE) confirming to IS 7098(Part-II) 1985 /with latest amendments.

Supply and fixing of 11 kV cable end box outdoor type heat shrinkable type for 11kV XLPE 3 core 50-95 sqmm size and connection with crimped lugs on cable end box.

Supply, erection, testing & commissioning of GO switch 11KV 400Amp 3pole with 9 Nos insulators operating handle along with locking arrangement system hot deep galvined vertical type.

Supply, erection, testing & commissioning of DO switch fuse 11KV 400Amp pole operated outdoor vertical mounting expulsion type having hot deep galvined base post type insulator and fiber glass fuse carrier.

Supply, erection, testing & commissioning of 11KV gapless metal oxide lighting arrester complete with hardware, fixtures, hot dipped galvanised pin, nut, bolts, washers etc to relevant ISS.

Supply of material and providing of copper plate Earthing arrangement by digging the Pit. Copper Plate size 600 X 600 X 3 mm as per drg.No.DRM/KOTA/01927/ELR.

Supply & Erection of material for fabricated steel work other than mast with SPS.

Supply & fixing of 9 mtrs long steel joist pole size 175 mm X 85 mm approx weight 19.1 Kg/m.

Supply, Installation, fabrication, testing & commissioning of LT Distribution panel Enclosure 16 Gauge fabricated with MS angle Size 1575X1200X400 mm (HXWXD) approx. with door 51 and locking arrangement duly painted red oxide and power coated enamel paint consisting of following items - INCOMING CIRCUIT- 01 No. MCCB 4 pole 160 Amp. 25 KA TM Release, Type: DN1- 250C, 415V AC, 50 HZ. Ampere meter with selector switch -01 no., voltmeter with selector switch -01 no., indication lamp RYB 03 nos., Changeover Onload Manual 160 Amp. 04 Pole 01 no. with indicator 02 no., CT 150/5A 15VA- 03 nos., Copper busbar Main 200 Amp. rating- 01 set & Earth 200 Amp. - 01 Set, MCB 6A SP C 10KA - 04 nos. OUTGOING CIRCUIT- TM Release 04 no. MCCB 4 pole 63 Amp. 25 KA. All MCCB in incoming and outgoing circuit will be provided with Extended Rotary Handle and Spreader Terminals - 4 Pole (Set of 8) etc. as per attached detailed specification.

Supply and fixing of wall mounted bracket fan sweep 400 mm suitable for 230 volts, 50 hz moving type with regulator and control switch on & off with accessories.

Supply, installation, testing & commissioning of concealed wiring of light/Fan/Bell points in PVC rigid conduit pipe size 25mm dia medium class minimum thickness approx. 1.6mm to 53 1.8mm of ISI mark with 1.5 sq.mm. multistrand PVC insulated copper conductor cable confirming to IS:694-1990 or latest with one holder/ceiling rose on junction box with round plate with 2.5 sq.mm. PVC insulated copper wire green coloured for earthing along with connection etc. including stone wall cutting, replaster, painting and other civil work

Supply, Erection, testing & commissioning of material for concealed wiring of sub main phase & neutral in PVC rigid conduit pipe size 25mm dia medium class minimum thickness 54 approx. 1.6mm to 1.8mm of ISI mark with 4 sq.mm. PVC insulated single core multistrand copper cable with 2.5 sq.mm. PVC insulated copper wire green coloured for earthing & connection etc. Separate PVC pipe to be provided for this item. including stone wall cutting, replaster, painting and other civil work

Supply of material & fixing of flush metal box of 12-Module with connection used for concealed modular flush metal box wiring.

Supply of material & fixing of plate Inner & Outer 12-Module used for concealed modular wiring.

Supply of material & fixing of flush metal box of 8-Module with connection used for concealed modular flush metal box wiring.

Supply of material & fixing of plate Inner & Outer 8-Module used for concealed modular wiring.

Supply of material & fixing of flush metal box of 6-Module with connection used for concealed modular flush metal box wiring.

Supply of material & fixing of plate Inner & Outer 6-Module used for concealed modular wiring.

Supply of material & fixing of flush metal box of 4-Module with connection used for concealed modular flush metal box wiring.

Supply of material & fixing of plate Inner & Outer 4-Module used for concealed modular wiring.

Supply of material & fixing of flush metal box of 3-Module with connection used for concealed modular flush metal box wiring.

Supply of material & fixing of plate Inner & Outer 3-Module used for concealed modular wiring.

Supply of material & fixing of flush metal box of 2-Module with connection used for concealed modular flush metal box wiring.

Supply of material & fixing of plate Inner & Outer 2-Module used for concealed modular wiring.

Supply of material & fixing of S.P. switch 6 Amp. one way (1-Module) used for concealed modular wiring.

Supply of material & fixing of 6 Amp. 5-pin socket (2-Module) used for concealed modular wiring.

Supply of material & fixing of fan regulator 5-step (2-Module) used for concealed modular wiring.

Supply of material & fixing of S.P. switch 16 Amp. one way (1-Module) used for concealed modular wiring.

Supply of material & fixing of 6/16 Amp. 6-pin combined shuttered socket (2-Module) used for concealed modular wiring.

Supply & fixing of blank plates (1-Module) used for concealed modular wiring.

Supply of materials and fixing of main distribution box 10 way suitable for housing MCB and ELCB with copper busbar and neutral link. Distribution box should be fixed on wooden 73 taper plug or steel fasteners etc. with providing and fixing of 01 no. MCB DP 32 Amp. breaking capacity 6 KA and 06 Nos. MCB SP 6-32 Amp. breaking capacity 6 KA with 01 No. ELCB 40 Amp. DP, sensitivity 100 m. Amp. and connections etc. The distribution board is to be fixed on wall with the help of rag bolt /fastener or on board and connecting the same with suitable size of wire duly crimped lugs.

Supply & fixing of MCB DP 16Amp.

Supply & fixing of Recess mounting fitting LED Panel 36 Watt in 2' x 2' size. Optics diffuse for 230 Volt, 50 hz cut out size 595 x 595 mm.

Supply, Installation, Testing & commissioning of LED name board Hindi and English word, and One Indian Railway Logo board as per attached specification.

Supply of material & fixing of S.P. switch 6/10 Amp. one way (1-Module) used for concealed modular wiring.