Renovation of office building of Botad division office, Botad Town -2 sub division, Barvala sub division, Paliyad sub division and Botad Division Meter testing laboratory under Botad Circle office

NAME OF WORK : Renovation of office building of Botad division office, Botad Town -2 sub division, Barvala sub division, Paliyad sub

division and Botad Division Meter testing laboratory under Botad Circle office

Sr No. PARTCULARS OF ITEM QTY RATE PER AMOUNT

Excavation for foundation upto 1.5 m depth including sorting out

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth

Providing & lying controlled concrete M-250 and finishing smooth with

curing etc complete including the cost of form work but excluding the

cost of reinforcement for R.C.C. Work in . -slabl beam, chhajahs, up to

floor two level

Providing & lying controlled concrete M-250 and finishing smooth with

curing etc complete including the cost of form work but excluding the

cost of reinforcement for R.C.C. Work in . -plinth beam,coping, Lintel

up to floor two

Providing & laying controlled cement concrete M.250 with curing etc

completed including the cost of form work but excluding the cost of

5 reinforcement for R.C.C. Work in - Slab,staircase etc. for ground floor 6.00 7276.00 cmt

stair cabin slab for all thickness.

Providing & laying controlled cement concrete M.250 with curing etc

completed including the cost of form work but excluding the cost of

reinforcement for R.C.C. Work in - COLUMN etc. for ground floor UP

TO FLOOR TWO LEVEL

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg./Sq.Cm in foundaiton and plinth in

Cement Mortar 1:6 (1-Cement : 6-fine sand)

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg./Sq.Cm in SUPER STRU.in Cement Mortar

1:6 (1-Cement : 6-fine sand)

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-

9 Cement : 3-coarse sand ) with 2 Nos of 6mm Mild steel round bars 35.00 731.51 Smt

after every three course embedded in Cement Mortar in foundation

and plinth (B) Conventional

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand)

Providing 20 mm thick double coat mala cement plaster on interior

brick / concrete work for plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

Providing and fixing pre-cast Rubber Dye interlocking concrete block

60 mm thick with grade of concrete M200 pnumatic compressed by

12 mechanically pressed and as per approved design including 75 mm 1900.00 699.93 Smt

sand layer for levelling and fitting the joints with sand in proper line

and level etc. complete.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

13 bending, binding and placing in position complete upto floor two level 2700.00 76.52 kg

Providing & fixing to wall, ceilling, and floor in plumb by means of GI

clamps of 18 gauge sheet with 1 to 1.5 mtrs. Distance 6.00 Kg. /cm2

working pressure polythene pipes of approved brand incl. joining with

approved solution & all fittings like bend, tee. Y bend plug bend with

water tight jointsIf pipe laid in trenchesscope -160 mm Dia.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line.

Filling in foundation and plinth with murrum or selected soil in layers

16 of 20cm. thickness including watering, ramming and consolidating etc. 1460.00 298.79 cmt

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead

paint. (A)In beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross beams. Hip and

jack rafters, purlins conneted to common rafters and the like

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M.

18 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray 70.00 2209.41 Smt

cement slurry including rubbing and polishing complete. (A) Marble

slab 25mm thick

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

19 shade including throughly brushing the surface free from mortar 3360.00 82.03 Smt

droppings and other foreign matter and sand papered smooth.-WALL

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

20 shade including throughly brushing the surface free from mortar 1600.00 87.50 smt

droppings and other foreign matter and sand papered smooth.-

Finishing Wall with Weather Proof Exterior Emulsion Paint

on Wall Surface (Two Coats) to give an required shape even

21 shade after thoroguhly brushing the surface to remove all 3150.00 119.07 SMT

dirt, and remains of loose powdered materials etc. complete

Painting TWO coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint,

22 brushing to give an even shade including cleaning the surface 240.00 114.08 Smt

of all dirt, dust and other foreign matter.

Providing & fixing G.I. Barbed wire fencing (12/14 Gauge) having mass

and uniformity of Zinc coating & specifications shall be as per IS

– 1978 & IS 4826 – 1979 code with minimum 70 micron coating having

6 horizontal rows & 2 diagonals, fixing with angle posts by means of

G.I. U pins or with R.C.C. poles by 14 Gauge G.I. Wire as per drawing

etc., complete as directed

Dismentling of Existing Barwala sdn garrage and dismentling existing

toilet Block at Phcampus Botad

Removing and scraping of old deteriorated plaster of any thickness

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(ii) Exceeding

Demolition including stacking of serviceable materilas and disposal of

27 unserviceable materials with all lead and lift. (i) R.C.C. work 10.00 1071.63 CMT

Demolition of Brick work and stone masonry including stacking of

28 serviceable materilas and disposal of unserviceable materials with all 15.00 557.32 cmt

lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of

29 serviceable materilas and disposal of unserviceable materials with all 150.00 48.63 Smt

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters

etc. stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift.(ii) A.C. sheet roofing.

SITE CLEANING BARWALA SDN VARIOUS "BAVLIYA TREE ", GRASS ETC

P & F steel cupboard shutter of 20 gauge with steel frame & fixing the

frame with brick masonary including locking arrangement with 1 coat

of primer ( red oxide ) i.e asian, dulux or its equivalent and 3 coats of

approved oil paint i.e asian, dulux or its equivalent etc. complete as

per requirement and instruction of EIC.

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush

pipe.(A) Squating plate pattern white earthenware

Providing and fixing wash basin with single hole for pillar tap with C.I.

Or M.S. brackers painted white including cutting holes and making

34 good the same , including fittings pillar tap, stop cock, Rubber plug for 10.00 2059.94 NO

sink etc, (A) Vitreous china (I) in white or colour

Providing laying and jointing in true line and level U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL

/ FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials. 25mm dia.

Providing laying and jointing in true line and level U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make PRINCE / SUPREME / ASTRAL

/ FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.......50mm dia

prov and Fixing Exhaust Fan energy efficient with incl all material and

labour charge etc comp.

Providing, & fixing hot pressed phenol bonded, exterior type solid

flush door 30mm shutter made by approved brand & as per I.S.I.

standard with water resisting plywood facing and 1mm thick

laminated sheet on both side of door & teak wood leaping all-round

including 100X75mm. teak wood frame.If necessary with glass looking

window with T.W. batten and polishing /Colour. Rates are without

fixtures & fastening but with 3 NO. of 100mm. long butt or

parliamentary hinges on each flap of double shutter & 150mm. long

hinges for single shutter and 3 NO. of M.S. flat hold fast grouted in C.C.

(1:2:4) on each side of frame, 3 coats of oil painting of approved

shades make etc., complete as per drawing & as directed by E.I.C.

Providing and fixing fully glazed/partly glazed Single door shutter

made, frame of 10.15cmX4.45cm aluminum section, and Shutter-Top

& vertical section of 8.5cmX4.45cm size and bottom section of

11.40X4.45cm size, using 5mm thick "TRIVENI" or HB4 plain glass

39 glazing deep rubber gasket with locking arrangement, all fixtures & 3.00 4081.50 Smt

fastening of anodized section with all labours & materials etc.

complete as per drawing & as directed by EIC Complete as per drawing

and as directed by E.I.C..

Providing and fixing FRP frame 100X50 mm and 28 mm thick FRP

depressed pannel shutter having extra reinforcement on sides and

edges and in Gel coat finish.The core of the shutter & frame is to be

filled up with injected fire retardent grade polyurethane foam done in

situ along with embedded wooden pieces for stiffening and also for

taking hinges and all fixures. The whole FRP Frame and shutter is to

be water proof, weather proof, termite proof and resistance to mild

acid/alkali.Rates are to be inclusive of S.S. hinges with necessary

screws and allumunium fixtures & fastening & fastener sleeve.

Providing and fixing Window having extruded Alluminium Colour

anodized section frame main outer size 63.50 x 38.10 x 1.95mm (of

Jindal Section No. 4605, @ Wt. 1.094 Kg./Rmt.), horizontal two track

member size 61.85mm x 31.75mm x 1.20mm (of Jindal Section No.

8687 @ Wt. of 0.695 Kg./mt.), vertical member of size 61.85mm x

31.75mm x 1.30mm (of Jindal Section No. 8758 @ Wt. of

Kg./mt.) with sliding shutters of horizontal member size 40mm x

41 18mm x 1.29mm (of Jindal Section No. 8949 @ Wt. of 0.456 Kg./mt.), 15.00 1696.73 Smt

vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section No.

8947 @ Wt. of 0.456 Kg./mt. / Section 8948 @ Wt. 0.457 Kg./mt) with

5mm thick transparent bronze colour tinted float glass with powder

coated alluminium fittings and fixtures and transparent silicon sealant

glass fixing to frame as per detailes etc. complete for Window

Providing and laying 24" x 24" Vitrified 8mm thick tiles flooring over

20mm (Average) base of Cement Mortar 1:6 (1-Cement : 6 Coarse

Sand) on new surface or fixing on existing flooring by adhesive

42 materials including dismentalling of existing flooring and jointed with 230.00 1251.89 Smt

colour cement slurry including finished with flush pointing & cleaning

the surface etc. complete for Light Shade

Providing and laying white glazed tiles 6mm thick in skrting risers of

43 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- 240.00 891.38 Smt

coarse sand) and jointed with white cement slurry

Providing & fixing MS plain grills of required pattern to wooden frames

of windows and gap filling of wall etc. with MS flats or M.S, pipes at

44 required spacing and frame all- round square or round bars with 330.00 110.18 kg

round headed bolts and nuts or by screws with one coat red oxide &

two coat of oil paint (A) plain grill

Providing and laying Broken China Mosaic flooring for terrace using

12 mm to 20mm broken pieces of glazed tiles to be laid over cement

mortrar 1:3 to plain or slope and to be tampred to bring mortar creme

45 out up to surface using white cement including rounding off junctions 110.00 771.98 Smt

and extending them up to 15cm along the wall, clearing with water

and oxalic acid etc. as directed.

Providing & applying APP modified 3.00 mm Thick polyster reinforced

Bituminous Waterproofing membrance as epr details specification

using torch for bonding by adopting a suitable gas torch. Gas torch will

burn off the flameine surface melt a thin layer of bitumin while

enrolling and laying membrance. The flame shall be directed between

the lowest part of the roll and substract and applied until the surface

of the felt start swelling. overlaps of 100 mm for sides and 150 mm for

ends shall be provided and torched. including applying a coat of

bitumin primer @ .025 liter/ Smt. etc complete as directed by E.I.C.

Providing & Fixing corrugated G.I. sheets CLASS 3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

47 bitumen and G.I. limpet washer. filled with white lead complete- 210 726.92 Smt

excluding the cost of purlins, Rafters and Trusses. 0.80MM THICK

Providing erecting fixing double coated Syntex of Equivalent PVC ( ISI )

mark Water tank of required capacity each with all necessary fittings

and connection etc complete on terrace as directed by EIC.

Providing 2500mm internal diameter & 3.0 Mt. Deep soak pit including

excavation in all types of soil & soft rock & CC(1:3:6) bedding, 300 mm

thick below masonry and 450mm thick B.B Masonry in CM(1:6) up to

600mm height, 350mm thick for further 600mm and 230mm thick for

remaining height honey combed, plastering in CM(1:3) outside up to

1.5 Mt height and 100mm thick M200 RCC slab with 600x600mm

C.I.HEAVY duty cover with frame, with necessary reinforcement as per

49 design & C.I Vent pipe 1800mm long with B.B masonry pillar 1 52844.47 NO

350x350x450 plastered all around filling with 40 to 50mm size brick

bats up to 1.5 Mt depth, including 16mm dia M.S’U’ shape steps,

refilling including disposal of the surplus excavated earth up to the

lead of 500mt. Radius including 3 coats of white or colour wash to all

exposed finished surface etc. complete as directed by E.I.C.

Supplaying and Filing black cotton soil in flowerbed around New office

(A) TotalCost in Rs.

(B) Bidder's Offer % Above/Below of (A)

(C) Grand Total (C = A + B%)

(C) Grand Total (C = A + B%)

(D) Goods & Service Tax ( D = C x GST in % _________ )

(E) Grand Total Including GST ( E = C + D )

(E) Grand Total Including GST ( E = C + D )

Chief Engineer (Material)

PGVCL, Corporate office Rajkot