PROVISION OF 06 X GUARD POST CABINS AND 02 X BOOM BARRIERS AT ITM MUSSOORIE

Amount

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil etc complete all as specified and directed.

Excavating in trenches, in any type soil not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material soil exc 250m but not exceeding 500m & depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for cement concrete 1:4:8 Type D-2 using 40 mm graded crushed stone aggregate in foundation filling sub base and mass concrete complete all as specified and directed..

M&L for Plain cement concrete 1:2:4 type -B2 (using 40mm graded crushed stone aggregate as in foundation filling & mass concrete , sub base complete all as specified and directed.

Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for Providing 40 mm thick Damp proof course to horizontal or vertical surfaces In cement concrete 1:2:4, type B-0 including necessary formwork Complete all as Specified and directed.

M & L for 18mm thick Granite stone slab (of any type/Colour ) Slabs machine cut in skirting/dado/ cill and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including rounding to edges cutting and polishing over and including 10mm thick cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing for Granite stone slab complete all as speifide & directed

M&L for supply and fixing 60 mm thick Insulated PUF sandwitch wall panels , density 40 kg/cum, as in cladding to wall, fixed with and including necessary U channels and self locking, self tapping screws etc complete all as specified and directed.

M&L for supply and fixing 60 mm thick Insulated PUF sandwitch Roof panels , density 40 kg/cum, as in roof covering /, Ceiling cladding etc, fixed with and including necessary U channels and self locking, self tapping screws etc complete all as specified and directed.

S&F, M.S Plates (plain or chequered) Fe-290 (Gde- E- 165) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F, M.S work as in Roof trusses (framed) Fe 410-W (Gde -E-250) quality-A, trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle channel or flat sections) including distance pieces cleats etc. complete all as specified and directed.

S&F 11 to 15mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other end, or screwed both ends, each screwed and to fitted with washers and one hexagonal or square nut exc 10 cm and n exc 15 cm complete all as specified and directed.

S&F Framed work as in barrier on road made of MS pipe of requred dia including chanel, pully, bolts and nuts, MS sheet in bucket like shape of required size or doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc. Fe-290 (Gde-165)complete all as specified and directed.

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profiledimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L for Supply and fixing factory made uPVC white colour Two track two panels sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC, extruded glazing beads, uPVC extruded interlock and uPVC extruded line sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed.

M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L 100 mm thick cement concrete 1:4:8 type D-2 (40 mm garded aggrgate) as in sub base of floor complete all as specified and as directed.

M&L 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg as in plinth protection laid in alterrnate panels and finish even and fair complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed.

M&L for 4.00 mm thick sheet glass ordinary quality in panes exc 0.50 sqm each pane fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

M & L preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Nylon Rope of 20 mm dia complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) complete all as specified and directed

Demolition of (reinforced cement concrete) (reinforcement cut as required to facilitiate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles,and removal of demolish materials to a distance exceeding 500 M but not exceeding 1000mtrcomplete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any positione Complete all as specified and directed

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringst Complete all as specified and directed.

M/S VIJAY TRADERS (BID ID -3142410)

Amit Associates (BID ID -3141868)