PROVN OF FOOTHPATH ALONGSIDE BOUNDARY WALL AT LEFT OVER AREA AT GANDHINAGAR AND SPECIAL REPAIR TO PERIMETER SECURITY WALL AT GANDHINAGAR UNDER GE (AF) CHILODA

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out soft and loose soil complete all as specified and directed.

M&L for hardcore using broken stone or boulders not exc 63mm deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 100mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shade of paver block complete all as specified and directed.

M & L 25 mm sand filling under floors or in foundation incl watering and consolidation complete all as specified and directed.

M& L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever complete all as specified and as directed.

Removal of excavated soil to a distance n exc. 50 m and deposited where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including quoins, arches, pillars etc., and precast concrete articles and disposing off the rubbish materials outside MD land complete all as specified and directed.

Demolition of Cement Concrete (Reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Dismantling galvanised punched type concertina coil of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling Galvanised 2 strand, steel barbed wire 2.24mm dia barbed of any description and in any position not otherwise specifically provided for complete all as specified and directed. (Note : Each line wire to be measured.)

M&L for Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves inluding supports, overhangs etc also splays between floor and beams etc, flat & rough finished surface of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular & rough finished surface of concrete complete all as specified and directed.

S&F Reinforcement steel (TMT Bar) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Reinforcement steel (TMT Bar) 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L for Reinforced Cement concrete (nominal mix) Type B1 1:2:4 (using 20 mm graded aggregate) for column, pillars, piers, posts and struts etc complete all as specified and as directed.

M&L for Reinforced Cement concrete (nominal mix) Type B1 1:2:4 (using 20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surfaces of walls finished even & smooth without using extra cement complete all as specified and directed.

S&F Mild steel works for posts, struts and grill in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iorn fillets (for securing wire mesh etc) incl all necessary drilling , bolting or welding / riveting, etc and similar work conforming to Fe-290 Gde -E-165 complete all as specified and as directed.

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of Red oxide primer over 10 cm in width or girth not otherwise described complete all as specified and directed.

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of Red oxide primer n.exc 10cm in width or girth complete all as specified and directed.

S&F Concertina coil with electro galvanised steel strip 0.5mm ± 0.02mm thick, width 19mm (before wrapping on central core wire) conforming to IS-1573, zinc coating-120gm / sqm and bituminous dipped, width of barbs 11.5mm, pitch of barbs 25.4mm ±0.20mmof 2 mm thick, and central core wire – made from high tensile spring steel core wire conforming to IS-4454 duly hot dipped galvanised( conforming to IS-2629) with dia 2.59mm ± 0.05mm, UTS 145-160Kg/sqmm, Zinc coating 250-300 gm/Sqm with 1050 mm dia coil fixed with AISI 304-15mm thick C&U clips ’C’ special type of coil and RBT wire ”U” clips special type for joining one coil to another coil and RBT wire to RBT wire joining complete all as specified and directed.

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (Note : Each line wire to be measured.)

M&L for preparation of newly plastered surface of wall and appplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M & L preparing new surface of wall and applying two coat of cement base paint over a coat of chalk whiting complete all as specified and directed.

M&L for preparing of old surfaces of walls and applying two coat of cement based paint complete all as specified and directed.

M&L for preparing of old surfaces of wall and applying one coat of acrylic weather coat paint complete all as specified and directed.

Ramdev and Sons (BID ID -3412636)

DMA PROJECTS (BID ID -3413207)

ARTI CONSTRUCTION (BID ID -3412906)

GIRNAR CONSTRUCTION (BID ID -3412956)

ALBA AC AND REF SERVICES (BID ID -3413012)

Shree Builders (BID ID -3411900)

Shreeganesh Construction (BID ID -3412082)