Repairing Boundry Wall & Section Office At Chhachhar Colony Of Shingoda Irrigation Scheme At.Village Chhachhar Ta.Kodinar Dis. Gir Somnath.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Description Unit Rate Qty Amount

Removing plaster including racking out

1 joints 20 mm deep etc complete (a) Sqmt 71.00 1297.00

2 Prov. and Laying in position Controlled

cement concrete using cement, sand

and crushed aggregate by mass and

machine mix for R.C.C/CC work

including necessary formwork

scentering scaffolding compaction by Cum 4698.00 9.10

vibrator,curing as directed with all lead

& lift etc complete Excluding the cost of

reinforcement FOR PLINTH COURSE &

COPING C) Concrete grade M-20 and

Providing, cutting, bending, binding

and fixing in position as per drawing

.TMT BAR, reinforcement for R.C.C.

3 works and anchor bars incl cost of black Kq 76574.00 0.59

annealed 16 to 18 BWG M.S.. Wire

etc.complete with all lead and lift. (B)

Providing & fixing barbed wire fencing

0.90 Mt.ht.using MS angle 40x40x6mm

size (3 mt. C/c) fixed in copping as per

architects design including barded

horizontal + 2 diagonal wire& finishing

complete with applying two coats of oil

painting on angle etc complete as per

attached details .

Sand face type cement plaster 20mm

thick in two coat i) Backing coat 12mm

thick in C.M. 1:3 and ii) Finishing coat

8mm thick inC.M.1:2 including finishing

curing scaffolding etc complete. a)

UPTO 6.0 Mt HEIGHT

Finishing wall with Water proofing

cement paint of on wall surface (two

coats) to give an approved brand and

manufacture and of required shape

even shade after thoroughly brushing

the surface to remove all dirt, and

remains of loose powdered materials

Finishing wall with weather proof

exterior emulsion paint on wall surface

(two coats) to give an required shape

7 even shade after thoroughly brushing Sqm 122.14 127.00

the surface to remove all dirt, and

remains of loose powdered

materials.etc complete

Wall painting (three coats) with primer

plastic emulsion paint of approved

brand and manufacture on undecorated

wall surface to give an even shade

including throughly brushing the

surface free from mortar droppings and

other foreign matter and sand papered

smooth. etc. complete.

Applying priming coat and Painting

Two coats (excluding priming coat)

over Existing steel and other metel

surface after and including preparing

the surface by throughly cleaning,

oil,grease, dirt and other foreign matter

and scoured with brushes fine steel

wood, scrapers and sand paper with

ready mixed priming paint brushing

Supplying of crushed stone

aggregates,chippings etc. of hard stone

of following nominal size free of

disintegrated pieces deleterious and Cum 505.04 21.25

organic mater (for Bitumen surface

dressing etc.) and grading as per I.R.C.

Supplying of crushed stone

aggregates,chippings etc. of hard stone

of following nominal size free of

11 disintegrated pieces deleterious and Cum 287.85 21.25

organic mater (for Bitumen surface

dressing etc.) and grading as per I.R.C.

Spreading the stone aggregate for

rolling and W.B.M. including filling the

interstices to required camber and

gradient (excluding spreading of

Blindage) (iii) 25mm to 50mm size

Spreading the stone aggregate for

rolling and W.B.M. including filling the

interstices to required camber and

gradient (excluding spreading of

Blindage) (iii) 6mm to 25mm size

Providing and fixing pre-cast Rubber

Dye / steel Dye inter locking concrete

block 60mm thick with grade of

concrete M300 pnumatic compressed /

vibrated mechanically and as per

14 approved design Confirming to IS Sqm 708.16 425.00

15658 : 2006 including 35 mm Sand

layer for levelling and filling the joint

with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc.

Providing and fixing pre-cast concrete

kerb stone of gray cement based

concrete block 30cm length,30cm

height and 15cm thick of M200 grade

15 concret as per approved design and Rmt 421.72 236.00

including excavation for fixing in

proper line and level,filling the joint

with C:M 1:3 (1cement:3fine sand) etc

Providing and laying broken chine

mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to

bring mortar creme out upto surface

using white cement including rounding

off junctions and extending them upto

15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be

made of co-extruded polycarbonate

channel with diffuser part in needed

opal finish with company mark/name

160V to 270V, Power Factor more than

Luminaire efficacy> 85 lumens/watt,

LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.) (A) Tube

Light with integral driver (ii) 18-20

Watts, Surge - 2KV,IP-20, conventional

Supply, Installation, Testing and

Commissioning of suitable sweep, BEE

5 Star rated, Ceiling fan with Brush Less

Direct Current (BLDC) permanent

ferrite magnet Motor, class of insulation:

B, Rust free 3 nos.Aluminium blades,

nos. canopies, shackle kit with earthing

provision, copper winding, Power

factor not < 0.9, Service Value

(CMM/W) minimum 6.85, Air delivery

minimum 215 CMM, 350 RPM,230v

(tolerance as per IS : 374-2019), THD <

10%, with remote unit for Speed Control

and all remaining accessories including

safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current

and overload protection , 50 Hz, Single

phase AC Supply, earthing etc.

Complete as required.[ Make shall be

approved by Engineer in Charge] (B)

1200 mm Sweep (48")

Providing erecting and fixing double

coated Syntex PVC. (ISI) water tank of

19 required capacity each with all Liter 3.95 1000.00

necessary fittings and connection etc.

complete on terrace.

Providing and fixing FRP frame size

100x50 mm and 28mm thick FRP

depress panel shutter having extra

reinforcement on sides & edges in Gel

coat finish. The core of the shutter &

frame is to be filed up with injected fire

retardant grade polyurethene foam

done in situ alongwith embedded

wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP

frame & shutter is to be water proof

weather proof, termite proof &

resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with

necessary screws & alluminium fixtures

& fastenings & fastener sleeve.

Providing and fixing window having

extruded aluminum Colour anodized

section frame main outer size 95mm x

24mm x 1.17mm (of Jindal Section

horizontal Three track member size

92mm x 31.75mm x 1.30mm (of Jindal

Section no:8688,@ Wt.1.07 Kg/mt),

vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size

mmx18mm x1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x

mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float

glass with powder coated aluminum

fittings and fixtures and transparent

silicon sealant glass fixing to frame as

per details etc

Providing and Fixing Machine cut, free

edges, machine polished Granite

Telephonice Black stone slab 18 mm

thick for Doors/Windows Cill and Jambs

cladding as per design including full

22 molded round front edge and 1 cm Sqmt 3869.11 15.10

nosing and laid on 10 mm thick cement

mortar 1:3 ( 1 cement:3 coarse sand)

jointed with grey cement slurry

including rubbing and polishing

finishing etc complete.

Supply of approved make FRP Pole

having following specifications: FRP

Light Pole made by CNC filament

winding machine using thermo set resin

polyester/epoxy resin system) having

minimum 62% glass content. The pole

should be in one piece and tapered

round in shape, having smooth finish

and should be totally free from

corrosion as well as non conductive &

shock proof Pole should be provided

with FRP Anchor Base and it should be

heavy duty, or MS Material duly painted

with Epoxy paint. Pole should be flame

retardant as per IS 6746. Resin used

shall be UV resistance and pigmented.

A highly weather resistant polyurethane

coating shall be applied to the pole after

applying suitable primer system that

23 ensures proper adhesion of the paint. Ea, 9023.34 10.00

Minimum coating thickness shall be

to 100 micron. Deflection of the pole

shall not exceed more than 10% of the

length of pole for the given load“ Pole

should be generally made as per the

dimensional data, performance criteria

and some interchangeability features of

poles as per standard ANSI C

latest version or ASTM D 4923/01

including cable termination box with

necessary accessories. The size of pole

and type of installation with foundation

as per manufacturer details and site

requirement are as below .(1) Suitable

for base plate mounting single arm

Bracket.[C] Overall length of 3.5 Mtr,

Average Thickness: 7mm. Top/ Bottom

OD Dia. A/F 89/135 mm ± 2mm. Weight

Supplying and Installation of Approved

make Integrated LED Solar light fitting

comprising in built Poly crystalline

solar panel, Lithium-ion 3.7 V battery,

LED CRI Greater than 70, CCT-6500K,

80 lum/watt all housed in Extruded

24 Aluminium body, with motion sensor & Ea, 17385.13 10.00

auto on-off device erected on existing

pole with following specifications.|(A)

12 watt LED light, with 15 W Solar panel,

3.7 V 26000 to 28000 mAh battery, 850-

900 Im luminus flux, suitable for mount

on 3.5 TO 4.0 mtr height pole.

Jungle clearance (Ganda Baval etc )of

Light/heavy dence (work done by

manually or by machinery ) including

25 grabbing of & removing the roots & Sqmt 3.80 3040.00

girth completely from the ground &

back fill with earth & making surface

good as directed including depositing &

removing the material away from the

site of work at own risk and cost as and

where directed etc completed for

following.(a) Light density

Geohydrological Ground water

26 investigation (With Vehicle charges) for Job. 3571.00 1.00

165 mm dia. DTH bore.

Drilling of 215 mm dia bore hole in

overburden strata (alternate layers of

lime stone & yellow sticky clay

formation) by DTH Rig up to required

depth including fixing of 175/180 dia

ERW/ PVC pipes (blank and slotted) & if

required further drilling of 165 mm dia

bore hole in hard rock (trap etc.) strata

by DTH drilling method up to total depth

of 45 mtr incl.measuring the yield by V

notch and flushing of bore etc.complete

in the Coastal area of saurastra.

Providing & Supplying in Standard

length ISI mark Rigid PVC pipe coupler

joint type 180 mm dia PVC Casing

Pipe.( 6.0 KG/Cm2) including all local

and Central Taxeses ,Transporation

,freight chargeses.etc complete.

Providing & Supplying and fitting of

Bore plug having 100mm height made

from PVC of std. make for Suitable for

180/200 mm dia. Pipe etc. Complete.

Manufacture ,Supply and delivery of

following ISI marked HDPE Pipes

(IS:4984/1985 with latest amendment)

having material Grade PE-80 in

approximate 100 mtr. Coil length or as

per GWSSB requirement with SS-316

Nipple at both end having 11 TPI

threads as per specifications, press

fitted and bolted having nominal

diameter as under as per detailed

Technical Specification of 40 MM Dia.

Providing,fixing in bore,lowering and

erecting of 1 Hp single submursible

motor I.S.I marked manufacturer, with

necessary starter and lowering 100 Mt.

31 cable of 2.5 mm With 80 mt. Cable Job. 34900.00 1.00

Covering Pipe With Installaton I.S.I

marked manufacturer with inclusive of

all taxes and all material and labor

Excavation for foundation upto 1.5 m

depth including sorting out and

32 stacking of useful materials and Cum 281.73 10.00

disposing off the excavated stuff upto

Meter lead.(C) Hard Murrum

White Stone Bela mesonry block in

course in superstructure with stone of

33 approved quality in Lime Mortar 1:5 (1- Sqmt 6698.05 3.90

Cement :5- course sand) including

packing the joints etc. complete. (G.F.)

Providing and fixing C.I. Manhole cover

34 0.60 M. x 0.45M. size having weight not Nos 958.17 6.00

less than 35Kg.

Providing and fixing wsh down water

closet (European type, W.C. Pan) with

integral P or S trap including jointing the

trap with soil pipe in Cement Mortar 1:1

(1-Cement : 1-fine sand) (Seal and cover

to be measured and paid for

separately)(A) vitreous China Pattern

:(i) in white colour

Providing laying and jointing in true line

and level 15mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including

fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe

36 shall be fixed on the wall with the help Rmt 72.65 32.00

of clamp at every two metre C/C or shall

be concelled as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

Providing laying and jointing in true line

and level 40mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including

fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe

37 shall be fixed on the wall with the help Rmt 148.12 13.50

of clamp at every two metre C/C or shall

be concelled as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

I/We am/are willing to carry out the work at… ...................... % above/below

percent(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Description of Item Rate

Item (with brief specification

Quantity Unit In In Amount

No and reference to book of

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ……………………………… (in

(C)Net Tendered Amount (A-B) (in figure) ………………………………

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: No. MIS 102010/17/K1, dtd. 30/07/2018 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Contractor Executive Engineer

Gir Somnath Irrigation Division