REPAIR OF VARIOUS TYPES OF WOODEN FURNITURE AND ITS POLISHING FOR SRC PRC AND VARIOUS UNITS AT GE RAMGARH CANTT

Amount

Almirah large 1/2Hx1/2Sh (Drg No:DB-4042) M & L for replacement of old damaged hasp & staple of Almirah Large ½ H x ½ with new one of 100 mm stainless steel hasp & staple, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing hanging Rod of Almirah large ½ H x ½ Sh with new 19 mm dia stainless steel hanging rod/ pipe,shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged socket of Almirah large ½ H x ½ Sh with new Socket (02 Nos per Almirah) shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable handle 'D' type of Almirah large ½ H x ½ Sh with new 150mm long Stainless steel 'D' type Handle , shape & size all as per drawing, complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing butt hinges of Almirah large ½ H x ½ Sh with new 75 mm long stainless steel butt hinges shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing Unserviceable /damaged shelves of Almirah large ½ H x ½ Sh with new 18 mm thick plywood (11 nos plies) BWR plywood (ISI marked) commercial grade & including providing 4 mm thick teak wood beading in front face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing back of Almirah large ½ H x ½ Sh with new 6 mm BWR plywood (ISI marked) commercial grade shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Almirah med ½ H x ½ Sh (Drg No:DB-4042/2959) M & L for replacement of old damaged hasp & staple of Almirah med ½ H x ½ Sh with new one of 100 mm stainless steel hasp & staple, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing hanging Rod of Almirah med ½ H x ½ Sh with new 19 mm dia stainless steel hanging rod, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged socket of Almirah med ½ H x ½ Sh with new Socket (02 Nos per Almirah) shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable handle 'D' type of Almirah med ½ H x ½ Sh with new 150mm long Stainless steel 'D' type Handle , shape & size all as per drawing, complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing butt hinges of Almirah med ½ H x ½ Sh with new 75 mm long stainless steel butt hinges shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing Unserviceable /damaged shelves of Almirah med ½ H x ½ Sh with new 18 mm thick plywood (11 nos plies) BWR plywood (ISI marked) commercial grade & including providing 4 mm thick teak wood beading in front face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing back of Almirah med ½ H x ½ Sh with new 6 mm BWR plywood (ISI marked) commercial grade,shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Almirah med With shelves (Drg No:DB-2969) M & L for replacement of existing Unserviceable /damaged shelves of Almirah med W/sh with new 18 mm thick plywood (11 nos plies) BWR plywood (ISI marked) commercial grade & including providing 4 mm thick teak wood beading in front face , shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old damaged hasp & staple of Almirah med W/sh with new one of 100 mm stainless steel hasp & staple, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing butt hinges of Almirah med W/sh with new 75 mm long SS butt hinges shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable handle 'D' type of Almirah med W/sh with new 150mm long Stainless steel 'D' type Handle , shape & size all as per drawing, complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing back of Almirah med w/sh with new 6 mm BWR plywood (ISI marked) commercial grade shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

BED PLY TOP (FD-245/246) :- M & L for Removing/replacement of old unserviceable wooden leg of head side, Bed Ply top and supply and fixing new well seasoned first class teak wood of size 60x60x660 mm, treated with two coats of French polish, shape & size as shown in drawing or complete all as directed by Engineer in charge. .

M & L for Removing/replacement of old unserviceable wooden leg of foot side, Bed Ply top and supply and fixing new well seasoned first class teak wood of size 60x60x500 mm, treated with two coats of French polish, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for Removing/replacement of old unserviceable plywood from foot board of BED PLY TOP and supply and fixing with new 4 mm thick plywood teak venner, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for Removing/replacement of old unserviceable plywood from head board of BED PLY TOP and supply and fixing with new 4 mm thick plywood teak venner, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for Removing of old unserviceable beading of BED PLY TOP and supply and fixing with new 12 mm dia half round cut well seasoned first class teak wood beading on head and foot board, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for Removing of old unserviceable long rail of BED PLY TOP and supply and fixing with new one made out from well seasoned first class teak wood of size 90x35x1980 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for Removing/replacement of old unserviceable short rail and fixing with new rail retrieved from long rail vide item No. 25 here-in-before, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for Removing/replacement of old unserviceable plywood top of BED PLY TOP and supply and fixing with new 12 mm thick plywood (7 nos plies) BWR plywood (ISI marked) commercial grade, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Book case small (FD-237): M & L replacement of top of Book case small of size 1200x300 x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all around, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of bottom of Book case small of size 1200x300x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all around, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of side of Book case small of size 660x300x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all around, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of shutter of Book case small of size 380x625x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all around edges of shutter and 25 mm knob PVC and a magnet both best quality fixed with GI screw to shutter,shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement for shelf of Book case small of size 260x760x18 mm with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading in front face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing back of Book case small with new 6 mm BWR plywood (ISI marked) commercial grade shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of broken/damaged bottom stage /frame including four legs of Book case small with new one, made out from well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

CHAIR DINING CUSHION LONG BACK (FD-357) M & L for replacement of front leg of Chair dining cushion long back with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of rear leg of Chair dining cushion long back with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of side rail of seat of Chair dining cushion long back with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of stiffener of legs of Chair dining cushion long back with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of unserviceable back rest of Chair dining cushion long back with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of unserviceable wooden seat of Chair dining cushion long back with new ply made out of 12 mm BWR plywood commercial face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing / damaged seat of Chair dining cushion long back with new seat made out of 50 mm thick foam 28 density with superior quality Rexene (of not less than Rs 150/- per RM) , including necessary pasting materials and fittings, shape and size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of unserviceable wooden back of Chair dining cushion long back with new ply made out of 12 mm BWR plywood commercial face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing / damaged back of Chair dining cushion long back with new back made out of 50 mm thick foam 28 density with superior quality Rexene (of not less than Rs 150/- per RM) , including necessary pasting materials and fittings, shape and size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of Chair Dining Cushion long back with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

CHAIR EASY WITH CUSHION (FD-358): M & L for replacement of existing/ damaged front leg of Chair easy with cushion with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing/ damaged rear leg of Chair easy with cushion with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing/ damaged side rail of seat of Chair easy with cushion with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing/ damaged arms of Chair easy with cushion with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing/ damaged back rest (wooden frame) of Chair easy with cushion with new one well seasoned 1st class teak wood, shape and size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing/ damaged wooden seat of Chair easy with cushion with new ply made out of 12 mm BWR plywood commercial face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing / damaged seat of Chair easy with cushion with new seat made out of 75 mm thick foam 28 density with superior quality Rexene (of not less than Rs 150/- per RM) , including necessary pasting materials and fittings, shape and size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing / damaged wooden back of Chair easy with cushion with new ply made out of 12 mm BWR plywood commercial face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing / damaged back of Chair easy with cushion with new back made out of 50 mm thick foam 28 density with superior quality Rexene (of not less than Rs 150/- per RM) , including necessary pasting materials and fittings, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of Chair easy with cushion with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Chair easy (FD-229):M & L for replacement of front leg of chair easy with new one well seasoned 1st class teak wood of size 510x55x25 mm, complete all as directed by Engineer in charge.

M & L for replacement of rear leg of chair easy with new one well seasoned 1st class teak wood of size 490x55x25 mm, complete all as directed by Engineer in charge.

M & L for replacement of arms of chair easy with new one well seasoned teak 1st class wood of size 65x25 mm, complete all as directed by Engineer in charge.

M & L for replacement of side rail of seat & back frame after making holes on chair easy with new one well seasoned 1st class teak wood of size 580x70x40 mm, complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one chair easy with screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

CHAIR WRITING (FD-280):M & L for replacement of front leg of chair writing with new one well seasoned 1st class teak wood of size 675x55x30 mm, complete all as directed by Engineer in charge.

M & L for replacement of rear leg of chair writing with new one well seasoned 1st class teak wood of size 890x55x30 mm, complete all as directed by Engineer in charge.

M & L replacement of Unserviceable back rest of chair writing with new one well seasoned first class teak wood shape and size as per drawing and set of 02 nos. in one chair, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of arms of chair writing with new one well seasoned 1st class teak wood of size 480x550x19 mm, complete all as directed by Engineer in charge.

M & L for replacement of side rail of seat after making holes on chair writing with new one well seasoned 1st class teak wood of size 470x65x30 mm, complete all as directed by Engineer in charge.

M & L for replacement of stiffener of legs of chair writing with new one well seasoned 1st class teak wood of size 25x20mm, complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one chair writing with screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

CHAIR DINING (FD-279): M & L for replacement of front leg of chair dining with new one well seasoned 1st class teak wood of size 455x45x25 mm, complete all as directed by Engineer in charge.

M & L for replacement of rear leg of chair dining with new one well seasoned 1st class teak wood of size 890x55x25 mm, complete all as directed by Engineer in charge.

M & L for replacement of side rail of seat after making holes on chair dining with new one well seasoned 1st class teak wood of size 470x65x30 mm, complete all as directed by Engineer in charge.

M & L for replacement of stiffener of legs of chair dining with new one well seasoned 1st class teak wood of size 25x20 mm, complete all as directed by Engineer in charge.

M & L replacement of Unserviceable back rest of chair dining with new one well seasoned first class teak wood shape and size as per drawing and set of 02 nos. in one chair, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one chair dining with screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

LOCKER (FD-54M): M & L for replacement of broken/damaged bottom stage /frame including four legs of LOCKER BED SIDE with new one, made out from well seasoned 1st class teak wood, shape & size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing Unserviceable /damaged shelves of LOCKER with new 18 mm thick plywood (11 nos plies) BWR plywood (ISI marked) commercial grade & including providing 4 mm thick teak wood beading in front face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable door/shutter of LOCKER with new one made out of 18mm thick prelaminated particle board having desired shade in one side and balancing white & including providing 4mm thick teakwood beading all around the edges and providing continuos chain type long hinge,shape & size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable hasp & staple of LOCKER with new 100mm long Stainless steel Hasp & staple ,shape & size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable handle 'D' type of LOCKER with new 150mm long Stainless steel 'D' type Handle , shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable hanging rod of LOCKER with new 19mm Stainless steel hanging rod, shape & size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged socket of LOCKER with new Socket (02 Nos per Locker) shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable Top of LOCKER with new top made out of 18mm thick prelaminated particle board having desired finish and other side white including providing 4mm thick teak wood beading all around, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable sides of LOCKER with new side made out of 18mm thick prelaminated particle board having desired finish and other side white including providing 4mm thick teak wood beading all around edge,shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable back with new back made out of 6 mm thick Plywood BWR commercial grade, shape & size all as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

MEAT SAFE & MEAT LARGE (FD-370/369) M & L replacement of unserviceable leg of Meat safe & milk large of size 45x45 mm at top & 30x30 mm at bottom with new one well seasoned 1st class teak wood, complete all as directed by Engineer in charge.

M & L replacement of unserviceable stiffeners of Meat safe & milk large of size 40x19x1312 mm long side & short side connection legs with new one well seasoned 1st class teak wood, complete all as directed by Engineer in charge.

M & L replacement of unserviceable bottom of Meat safe & milk large with new one well seasoned 1st class teak wood planks 19 mm thick of size 1350x540 mm, complete all as directed by Engineer in charge.

M & L for replacement of unserviceable intermediate stiffener of Meat safe & milk large of size 75x1312x19 mm thick with new one well seasoned 1st class teak wood, complete all as directed by Engineer in charge.

M & L for replacement of unserviceable front & side shutter of Meat safe & milk large with new wire gauge fixed on the frame made out from 19 mm thick wooden rail & style, SS wire gauge shall be 12 mm mesh of 20 gauge, and providing 75 mm butt hinges (02 nos.) for fixing front shutter as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing Unserviceable /damaged Back of Meat safe & milk large with new 18 mm thick plywood (11 nos plies) BWR plywood (ISI marked) commercial grade & including providing 4 mm thick teak wood beading in front face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old damaged hasp & staple of Meat safe & milk large with new one of 100 mm stainless steel hasp & staple, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing butt hinges of Meat safe & milk large with new 75 mm long stainless steel butt hinges shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable handle 'D' type of Meat safe & milk large with new 150mm long Stainless steel 'D' type Handle , shape & size all as per drawing, complete all as directed by Engineer in charge.

M & L for replacement of broken marble stone of size 560x1350x17 mm thick white marble stone of homogeneous texture in one piece & apply two coat of synthetic white enamel paint on all wooden surface (internally “& externally), shape & size as shown in drawing or complete all as directed by Engineer in charge.

MEAT SAFE & MILK SMALL (FD-369) M & L replacement of unserviceable leg of Meat safe & milk small size 45x45 mm at top & 30x30 mm at bottom leg shall be 100 mm with new one well seasoned 1st class teak wood, complete all as directed by Engineer in charge.

M & L replacement of unserviceable stiffeners of Meat safe & milk small of size 40x19x1312 mm long side & short side connection legs with new one well seasoned 1st class teak wood, complete all as directed by Engineer in charge.

M & L replacement of unserviceable bottom of Meat safe & milk small with with new one well seasoned 1st class teak wood 19 mm thick wood plank of size 900x540 mm, complete all as directed by Engineer in charge.

M & L for replacement of unserviceable intermediate stiffener of Meat safe & milk small of size 75x862x19 mm thick with new one well seasoned 1st class teak wood, complete all as directed by Engineer in charge.

M & L for replacement of unserviceable front & side shutter of Meat safe & milk small with new wire gauge fixed on the frame made out from 19 mm thick wooden rail & style, SS wire gauge shall be 12 mm mesh of 20 gauge, and providing 75 mm butt hinges (02 nos.) for fixing front shutter as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing Unserviceable /damaged Back of Meat safe & milk small with new 18 mm thick plywood (11 nos plies) BWR plywood (ISI marked) commercial grade & including providing 4 mm thick teak wood beading in front face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old damaged hasp & staple of Meat safe & milk small with new one of 100 mm stainless steel hasp & staple, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing butt hinges of Meat safe & milk small with new 75 mm long stainless steel butt hinges shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable handle 'D' type of Meat safe & milk small with new 150mm long Stainless steel 'D' type Handle , shape & size all as per drawing, complete all as directed by Engineer in charge.

M & L for replacement of broken marble stone of Meat safe & milk small of size 560x900x17 mm thick white marble stone of homogeneous texture in one piece ), complete all as directed by Engineer in charge.

SOFA SET 04/05 seater (FD-281) M & L for replacement of unserviceable leg of Sofa set 04/05 seater with new one well seasoned 1st class teak wood of size 70x35x525 mm, complete all as directed by Engineer in charge.

M & L for replacement of unserviceable short rail of Sofa set 04/05 seater with new one well seasoned 1st class teak wood of size 35x100x1090 mm, complete all as directed by Engineer in charge.

M & L for replacement of unserviceable long rail of Sofa set 04/05 seater with new one well seasoned 1st class teak wood of size 35x100x1590 mm, complete all as directed by Engineer in charge.

M & L for replacement of arm of Sofa set 04/05 seater with new one well seasoned 1st class teak wood of size 35x70x725 mm, complete all as directed by Engineer in charge.

M & L for replacement of bearer of Sofa set 04/05 seater with new one well seasoned 1st class teak wood of size 40x40x585 mm, complete all as directed by Engineer in charge.

M & L for replacement of wooden batten of Sofa set 04/05 seater with new one well seasoned 1st class teak wood of size 50x20x560 mm, complete all as directed by Engineer in charge.

Supply only 100 mm thick cushion of Sofa set 04/05 seater of feather foam of 32 density 530 mm X 500 mm covered with best quality tapestry cloth(not less than Rs.150/- per mtr.) as approved by Engineer- In- Charge/GE.

M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of Sofa Set 04/05 Seater with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE 2’x2’ (FD-293): M & L for replacement of existing broken/damaged rail of Table 2’x2’ with new one well seasoned 1st class teak wood of size 20x50x590mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged leg of Table 2’x2’ with new one well seasoned 1st class teak wood of size 35x55x740 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Top of Table 2’x2’ with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable corners of Table 2’x2’ with new one of well seasoned 1st class teak wood of size 75x75x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE 2'X2' with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE CENTRE (FD-274): M & L for replacement of existing broken/damaged long rail of Table centre with new one well seasoned 1st class teak wood of size 20x50x900 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged short rail of Table centre with new one well seasoned 1st class teak wood of size 20x50x450 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged leg of Table centre with new one well seasoned 1st class teak wood of size 30x60x372 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged Bottom rail / stiffeners short of Table centre with new one well seasoned 1st class teak wood of size 20x50x430 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged stiffeners long of Table centre with drawer with new one well seasoned 1st class teak wood of size 20x50x880 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Top of Table centre with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE CENTRE with screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE 3’x2’ WITH DRAWER (FD-283):M & L for replacement of existing broken/damaged long rail of Table 3’x2’ with drawer with new one well seasoned 1st class teak wood of size 20x110x900 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged short rail of Table 3’x2’ W/drawer with new one well seasoned 1st class teak wood of size 20x110x600 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged leg of Table 3’x2’ with drawer with new one well seasoned 1st class teak wood of size 60x30x740 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged stiffeners long of Table 3’x2’ with drawer with new one well seasoned 1st class teak wood of size 20x40x900 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged stiffeners short of Table 3’x2’ with drawer with new one well seasoned 1st class teak wood of size 20x40x600 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of drawer of Table 3’x2’ with drawer made out of 12 mm thick BWR ply wood frame, bottom shall be of 06 mm thick ply wood, with & including providing one knob of 25 mm dia PVC of best quality overall, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Top of Table 3’x2’ with drawer with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE 3'X2' With Drawer with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE BED SIDE (FD-276):M & L replacement of existing unserviceable Top of Table bed side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M&L for replacement of unserviceable back of table bed side with 06 mm thick commercial plywood size 450x410 mm , shape and size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of shelve of Table bed side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading in front face, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable side of Table bed side with new one of size 510x230 mm made out 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all around, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE PEG (FD-277) M & L for replacement of existing broken/damaged leg with new one well seasoned 1st class teak wood of size 30x50x362 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged rail with new one well seasoned 1st class teak wood of size 20x40x380 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Top of Table peg side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE PEG with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE 3’x3’ (FD-291):M & L for replacement of existing broken/damaged leg of Table 3’x3’ with new one well seasoned 1st class teak wood of size 55x35x740 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged rail of Table 3’x3’ with new one well seasoned 1st class teak wood of size 25x75x900 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable corner of Table 3’x3’ with new one of well seasoned 1st class teak wood of size 150x150x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M&L replacement of existing unserviceable Top of Table 3’x3’ with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE 3'x3' with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TEAPOY (FD-278):M & L for replacement of existing broken/damaged rail of Teapoy with new one well seasoned 1st class teak wood of size 20x50x510 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged leg of Teapoy with new one well seasoned 1st class teak wood of size 60x30x497 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing U/s Top of Teapoy with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged stiffener with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TEAPOY with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE WRITING WITH DRAWER (FD-275) M & L for replacement of existing broken/damaged leg of Table writing W/drawer with new one well seasoned 1st class teak wood of size 55x35x717 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged stiffener of Table writing W/drawer with new one well seasoned 1st class teak wood of size 25x50x1145 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable top rail of Table writing W/drawer with new one well seasoned 1st class teak wood of size 25x50x1125 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable side of Table writing W/drawer with new 18 mm thick pre laminated particle board with exterior grade with decorative choice lamination in one side & bolaning white with 4mm thick teak wood beading all round exposed edge, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of old damaged shutter of Table writing W/drawer of size as per drg with pre laminated particle board with exterior grade with decorative choice lamination in one side & balancing white & providing 4 mm thick teak wood beading to all round exposed edge of shutter and 25 mm knob PVC and a magnet best quality both fixed with GI screw to shutter, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable back side of Table writing W/drawer with new 6 mm thick teak veneer BWR plywood commercial ISI marked, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of drawer of Table writing with drawer of size as per drg made out of 12 mm thick BWR plywood & 06 mm thick BWR plywood at bottom including 25 mm knob PVC best quality fixed with GI screw to drawer, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Top of Table writing W/drawer with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE WRITING WITH DRAWER with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE 3’x2’ WITHOUT DRAWER (FD-284) M & L for replacement of U/s bottom rail of Table 3’x2’ W/out drawer with new one well seasoned 1st class teak wood of size 20x50x900 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable long rail of Table 3’x2’ without drawer with new one one well seasoned1st class teak wood of size 20x60x900 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable short rail of Table 3’x2’ without drawer with new one one well seasoned1st class teak wood of size 20x60x600 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable leg of Table 3’x2’ W/out drawer with new one 1st class of size 60x30x740 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M&L for replacement of U/s corner of Table 3’x2’ W/out drawer with new one well seasoned 1st class teak wood of size 100x100x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M&L replacement of existing U/s Top of of Table 3’x2’ W/out drawer with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE 3'x2' with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE DINING 06 PERSONS (FD-273) M & L for replacement of U/s long rail of Table dining 6 person with new one well seasoned 1st class teak wood of size 25x100x1500 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable leg of Table dining 06 person with new one well seasoned 1st class teak wood of size 60x30x740 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable short rail of Table dining 06 person with new one well seasoned 1st class teak wood of size 20x100x900 mm,shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable corner of Table dining 06 person with new one well seasoned 1st class teak wood of size 150x150x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Top of Table dining 06 person with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE DINING 06 PERSON with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE DINING 08 PERSONS (FD-273) M & L for replacement of unserviceable long rail of Table dining 08 person with new one well seasoned1st class teak wood of size 25x75x1800 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable leg of Table dining 08 person with new one well seasoned 1st class teak wood of size 40x75x740 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable short rail of Table dining 08 person with new one well seasoned 1st class teak wood of size 25x75x900 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable corner of Table dining 08 person with new one well seasoned 1st class teak wood of size 150x150x25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M&L replacement of existing unsesrviceable Top of Table dining 08 person with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE DINING 08 PERSON with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE DRESSING LADIES (FD-251):M & L for replacement of unserviceable stiffener long of size 40x 25x 650 mm of Table dressing ladies with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable leg of Table dressing ladies with new one well seasoned 1st class teak wood of size 40x40 mm at top & 25x25 mm at bottom & height of leg shall be 150 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of unserviceable stiffener short of size 40x25x230 mm of Table dressing ladies with new one well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of broken/damaged mirror of Table dressing ladies with new one mirror of 05 mm thick of size 366x1220 mm of approved quality free from all defects , distorted image,etc fixed to wooden frame, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of back side of mirror of Table dressing ladies made out of 06 mm thick BWR plywood commercial for frame & 06 mm thick BWR plywood commercial as in bottom of drawer, providing one 25 mm dia PVC knob of best quality, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable Top of Table dressing ladies with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of drawer of Table dressing ladies made out of 12 mm thick BWR plywood commercial for frame & 06 mm thick BWR plywood commercial as in bottom of drawer, providing one 25 mm dia PVC knob of best quality, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of glass pane of Table dressing ladies 05 mm thick fitted with two nos. sliding & fixed in aluminum channel of 25 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of back of the box of Table dressing ladies with 12 mm thick BWR plywood commercial grade of size 366x900x12 mm, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of PVC hard rubber shoes fixed at bottom set of four Nos. shoes in one TABLE DRESSING LADIES with GI screw, shape & size as shown in drawing or complete all as directed by Engineer in charge.

TABLE DRESSING GENTS (FD-230): M & L for replacement of broken/damaged mirror of Table dressing gents with new one mirror of 05 mm thick of size 380x760 mm of approved quality free from all defects , distorted image,etc fixed to wooden frame, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of back side of mirror of Table dressing gents made out of 06 mm thick BWR plywood commercial for frame & 06 mm thick BWR plywood commercial of size 410x790 mm as in bottom of drawer, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of drawer of Table dressing gents made out of 12 mm thick BWR plywood commercial for frame & 06 mm thick BWR plywood commercial as in bottom of drawer, providing one 25 mm dia PVC knob of best quality, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of existing unserviceable Top of Table dressing gents with new one made out of 18 mm thick pre laminated particle board exterior grade with desired finished in one side & balancing white & including providing 4 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of back of Table dressing gents made out of 6 mm thick BWR plywood of size 380x900, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of Table dressing gents batten 02 nos. on support of frame of size 35x25x1150 mm with new well seasoned 1st class teak wood, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for replacement of bottom of Table dressing gents of size 900x380 mm as per drg with 12 mm thick pre laminated particle board exterior grade with decorative choice lamination with 04 mm thick teak wood beading all round exposed edge, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Removing of broken/damaged plastic cane from Chair easy (Drg No FD-229) with new white plastic cane 02 mm width best quality & beading half round with 03 mm width white plastic cane joints/knots of cane strif shall be under the seat frame/back frame, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Removing of broken/damaged plastic cane from Chair writing (Drg No FD-280) with new white plastic cane 02 mm width best quality & beading half round with 03 mm width white plastic cane joints/knots of cane strif shall be under the seat frame, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Removing of broken/damaged plastic cane from Chair dining(Drg No FD-279) with new white plastic cane 02 mm width best quality & beading half round with 03 mm width white plastic cane joints/knots of cane strif shall be under the seat frame, shape & size as shown in drawing or complete all as directed by Engineer in charge.

Removing of broken/damaged plastic cane from Stool dressing CB(Drg No FD-282) with new white plastic cane 02 mm width best quality & beading half round with 03 mm thick white plastic cane joints/knots of cane strif shall be under the seat frame, shape & size as shown in drawing or complete all as directed by Engineer in charge.

M & L for French polishing two coat to all exposed surface of Almirah large 1/2Hx1/2Sh. Drg No DB-4042 (internal & external) of any description, width or girth including cleaning of old surface & preparing the article of wooden furniture as following, shape & size as shown in drawing or complete all as directed by Engineer in charge.

All as per item No. 198 here-in-before but Almirah Med 1/2Hx1/2Sh. Drg No DB-4042/2959

All as per item No. 198 here-in-before but Almirah med with shelf. Drg No DB-2969

All as per item No. 198 here-in-before but BED PLY TOP (FD-245/246)

All as per item No. 198 here-in-before but Book case small. Drg No FD-237

All as per item No. 198 here-in-before but Chair dining cushion long back. Drg No FD-358

All as per item No. 198 here-in-before but Chair easy with cushion. Drg No FD-358

All as per item No. 198 here-in-before but Chair easy. Drg No FD-229

All as per item No. 198 here-in-before but Chair writing. Drg No FD-280

All as per item No. 198 here-in-before but Chair dining. Drg No FD-279

All as per item No. 198 here-in-before but Locker . Drg No FD-54(M)

All as per item No. 198 here-in-before but Sofa set 04/05 seater. Drg No FD-281

All as per item No. 198 here-in-before but Table 2'x2'. Drg No FD-293

All as per item No. 198 here-in-before but Table centre. Drg No FD-274/375.

All as per item No. 198 here-in-before but Table 3'x2' With drawer. Drg No FD-283

All as per item No. 198 here-in-before but Table bed side. Drg No FD-276

All as per item No. 198 here-in-before but Table peg. Drg No FD-277

All as per item No. 198 here-in-before but Table 3'x3'. Drg No FD-291

All as per item No. 198 here-in-before but TEAPOY. Drg No FD-278

All as per item No. 198 here-in-before but Table writing With drawer. Drg No FD-275

All as per item No. 198 here-in-before but Table 3'x2' Withour drawer. Drg No FD-284

All as per item No. 198 here-in-before but Table dining 6 pers. Drg No FD-273

All as per item No. 198 here-in-before but Table dining 8 pers. Drg No FD-273

All as per item No. 198 here-in-before but Table dressing Ladies. Drg No FD-251/373

All as per item No. 198 here-in-before but Table dressing Gents. Drg No FD-230

All as per item No. 198 here-in-before but Stool dressing CB. Drg No FD-282

All as per item No. 198 here-in-before but Side board. Drg No FD-241/372

B N ENTERPRISE

M/S BIJAY KUMAR SINGH

KOLAY CONSTRUCTION