PMU-PKD/02/26-27/5.6.26

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Doing Horizontal directional drilling along/across the road, supplying & pulling 125mm HDPE pipe duct for drawing 11kV 3x300 sq mm Alu. XLPE UG cable through the duct including surveying of other utilities,pit marking, pilot drilling, pulling of cable through HDPE pipe, Pre-reaming, closing of pits with normal soil/filled sand/crusher sand,taking the cable to the open trenches and mounting the cable after providing loop at 1.2m depth, testing commissioning, supplying and fixing route markers at 100m interval, writing identification name, date of laying & commissioning etc. legibly using polyurathane paint etc.as per the direction of dep.officers. ( includes cost of HDPE pipe, temporary restoration charges for HDD pit with 1:3:6 CC etc.)

Excavation of cable trench of appropriate size ( normally 1.2 m deep and 0.35m/0.5m wide for single /double run) in all classes of soil including breaking clods, watering,rammimg and sectioning of soil bank etc and back filling the soil after cable laying and consolidating the soil in layer of 75 cm( excluding laying of cable). The cost includes temporary restoration charges along NH with 1:3:6 CC

Additional rate for excavation of cable trench in tarred / concrete surface

Laying HT XLPE UG cable of sizes beyond 3x185 sq mm and upto and including 3x300 sqmm including conveying cable Store/stacking place to work site and laying it carefully using cable rollers, taking through stone ware/G.I.pipes at road crossing/culverts/bridges etc.and through already laid HDPE pipe of size 110 mm &160 mm (for Railway crossing) whereever necessary, providing identification tags at 5m intervals, filling the space around the cable with riddled soil and covering the top with concrete slabs providing cable route markers at 100 m intervals, inclusive of cost of all materials (other than cost of GI/HDPE pipe & UG Cable), labour and transport including crane charges excluding excavation and backfilling.

Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Drilling hole of various sizes on existing Channel/Cross arm.

Fitting and erecting one HT Double Pole Structure using PSC pole in position including fitting 2 channel cross arms, digging and back filling pit in all classes of soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.