PROVN OF PATH WITH HARDSTANDING NEAR SHANGRILA AUDITORIUM AND OTHER SANCTIONED WORKS AT MISSAMARI UNDER GE MISAMARI

Amount

Surface dressing n exc 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide for foundation etc or for shafts, wells cesspits, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) n.exc.50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L Cement concrete (1:4:8) type D2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L cement concrete (1:2:4) type B2 (using 40mm graded stone aggregate) as in foundation, complete all as specified and directed.

M&L for 75 mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.

M&L for 125 mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in hardstanding, path, plinth protection, etc, complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.

M&L for 100 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.

M&L for 150 mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.

M&L for providing Pre-cast cement concrete1:2:4 block masonary with solid blocks, exc 10 cm in width and setting in morter 1:6 complete, complete all as specified and directed.

M&L for brick work with burnt madular size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius, complete all as specified and directed.

M&L for Rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for sand filling under floors spread, levelled, watered and well rammed in layers n.exc 25 cm thick, complete all as specified and as directed.

M&L for Hardcore of broken stone or boulders of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L for forming contraction (Dummy) joints joints 50 mm deep 10 mm wide filled with sealing compound Grade A, complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheetng 0.50mm thick of an colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F of pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates,etc, complete all as specified and as directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W(Gde-E-250) quality A, complete all as specified and as directed.

S&F Flat iron of reqd size and section as in wind ties, wall tie, hold fast, etc, conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter) forming holes, with riveted bolted or welded attachment Fe-410-W(Gde-E-250) quality A, complete all as specified and directed.

S&F 11 to 15 mm dia mild steel screw bolts with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm and not exc 15 cm long, complete all as specified and directed.

S&F 20mm dia mild steel screw bolts with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 30 cm long, complete all as specified and directed.

S&F for Maninal rope(Jute) 40 mm dia, complete all as specified and directed and as approved by GE

M&L Heavy duty (Dura stone) Coloured Ceramic Tiles 300x300x8-10mm thick, in Floors, set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M -35 grade over and incl 50mm thick sand coushining, complete all as specified and directed.

M&L providing precast cement concrete (1:2:4) type B1(using 20mm gradded stone aggregate ) kerb stone set in CM 1:4 , in required line, level and curvature, jointed including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

M&L for cement concrete prepolished chequered tilles 30cm x 30cm x 25mm thick set and jointed & pointed in neat cement slurry with grey cement and pigment in floor over and including 20 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed

M&L for preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

S&F sinks with drain board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, wastes and waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm and bowl size 410mmx330mmx160mm, complete all as specified and directed.

M&L for Vitreous china wash hand basin, white, (flat back or angle back) of size 450 mm x 300 mm including bracket, cutting for and pinning the ends of brackets or erecting, complete all as specified and as directed.

S&F 32mm bore dia Waste coupling of PTMT (half or full threaded) minium weight 32mm-45 gms/40mm-60 gms), complete all as specified and as directed.

S&F 15mm bore (dia), GI tubing, medium grade, with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

S&F 15 mm bore pillar taps of PTMT, high pressure, screwed for iron pipe and fixed , complete all as specified and directed.

S&F 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete as directed and specified.

S&F 15 mm bore stop cock, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore of pipe fixed complete all as specified and directed.

S&F PVC connections pipe 15mm bore size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F PVC (SWR) pipes, 50mm bore (dia), Single Socketed, in any length with Rubber Ring Joints, laid in Floor or fixed in walls, complete all as specified and as directed.

S&F PVC (SWR) 50 mm bore (dia) Bend any type, any radius, and jointing with Solvent Cement , complete all as specified and as directed.

S&F PVC (SWR) pipes, 75mm bore (dia), Single Socketed, in any length with Rubber Ring Joints, laid in Floor or fixed in walls, complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore (dia) Bend any type, any radius, and jointing with Solvent Cement , complete all as specified and as directed.

Sneh Construction Co

Saraswati Auto Works

Satya Enterprises

M/S Mahabir Traders

M/S RANA ENGINEERING ENTERPRISE

M/S B.B. Singh Contractor

shree kamakhya traders

M/S Singha Enterprise