Addn/Altn/Upgradation of Selected Old Md Accn at Banar

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on concrete surface as in ceiling and finishing the surface even and smooth without using extra cement all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 with WPC on stone masonry & concrete surfaces and finishing the surface even and smooth without using extra cement all as specified and directed. Note : WPC shall be measured and paid seprately.

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

M&L for square rubble walling Jodhpur type regular course well bonded bedded and solidly hearted built in cement mortar (1:6) all as specified and directed

All as per item No 6 but except stone.

Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc. 20mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type all as specified and directed.

Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement mortar all as specified and directed

M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over a one coat of JK/Birla wall putty including preparation of surfaces complete all as specified and directed.

M&L for two coats of oil bound distemper on newly plastered walls over a one coat of JK/Birla wall putty including preparation of surfaces all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash all as specified and directed.

All as per item No 12 but on old surface

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.

M&L for Joint free coloured non-skid ceramic tiles 7 to 8 mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified and directed.

All as per item No 15 but as in skirting incl 10mm thick rendering in CM 1:4

M&L for coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surface 300 x 200 x 7 mm thick (glossy finish) on walls/vertical surfaces including 10mm thick rendering in CM 1:4, all as specified and directed

M&L for 25mm thcik PCC (1:2:4) type B-0, using 12.5mm garded aggregates as in base concrete to floor finish all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm all as specified and directed..

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 40mm all as specified and directed..

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 15mm all as specified and directed..

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 40mm all as specified and directed..

S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets & 32mm waste cuppling complete all as specifed and directed.

Fixing only for Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore. Note:- Item shall be issued under Sch 'B'.

S&F Stainless steel kitchen plate rack 1.0mm thick of size 600 x 750 x 250mm.

S&F in repair grating doom 100mm dia of PTMT (min weight 25 gms) all as specified and directed

S&F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F 40 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

Fixing only Stop valves, fancy type, chromium plated screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore all as specified and directed. Note:- Item shall be issued under Sch 'B'.

All as per item No 30 but cup concealed type all as specified and directed.

Fixing only in repair 40mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed all as specified and directed. Note:- Item shall be issued under Sch 'B'.

Fixing only 15mm bib taps cast copper alloy, chromium plated, facncy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed. Note:- Item shall be issued under Sch 'B'.

Fixing only brass chromium plated shower rose 125mmm size all as specified and directed. Note:- Item shall be issued under Sch 'B'.

Fixing only in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 45cm long between flanges all as specified and directed. Note:- Item shall be issued under Sch 'B'.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern', size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish all as specified and directed.

S & F in repair low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve complete

Dismantling boarding, any description, fixed in any position with nails

M&L 1st Class hard wood 3mm Plain fillets, square, rectangular or traingular in section (of sectional area not exc 3 sq. cm), clean sawn, secured with nails or brads all as specified and directed

S&F Continuous (piano) hinges, 40mm width of flap (when open) Aluminium, bright finish or electro galvanised all as specified and directed.

S&F hasp and staple of size 100mm safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F extruded aluminium handles, fabricated type, of size 100 mm all as specified and directed.

Taking down chowkats or frames with shutters (W/o taking off shutters) n exc 1.5 sqm each all as specified and directed.

Taking down chowkats or frames with shutters (W/o taking off shutters) exc 1.5 sqm but n exc 4sqm each all as specified and directed.

Taking down shutter exc 1sqm but n.exc 2sqm and removing to store

S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats all as specified and directed.

S&F 300 mm long aluminium alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips for sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. Dia of sliding door bolts, not less than 16 mm dia.

S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed.

S&F Aluminium floor door stopper with suitable stops (Double) fixed in wooden door to stop all as specified and directed.

S&F Butt hinges,100 mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised & fixed type B-21 all as specified and directed.

S&F Aluminum tower bolts of extruded section of size 150mm all as specified and directed.

S&F stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples or wooden beads supplied with shutters all as specified and directed.

Demolition of reinforced cement Concrete in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, roof projection in D/S bldgs and similar suspended work

M&L RCC M-25 (20mm graded aggregate) for chajja, roof projection in D/S bldgs, fins facia, stair case, landing, balcony & the like etc all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent shape required, including welding to existing reinforcement cranking bending, hooking etc and binding with MS wire (annealed) not less than 0.9mm dia all as specified and directed.

Formwork to fins, louvers, fascia, chejjas, roof projection in D/S bldgs, stair case etc all as specified and directed

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe & coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm all as specified and directed.

Dismantling of 100mm dia cast iron pipes, jointed in cement mortar and taking out of trenches, if required all as specified and directed.

All as per item No 60 but 75mm dia

S&F 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

S&F 75mm dia Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).

S&F 75mm bore dia cast iron soil, waste and vent pipes, sand cast, in any length with or without ears, with cement joints, laid in trenches or in floors all as specified and directed.

All as per item No 64 but fixed on wall

S&F100mm dia cast iron soil waste and vent pipes ISI marked in any length with or without ears using cement joints fixed in walls all as specified and directed.

All as per item No 66 but laid in trenches or in floors

S&F 100mm dia CI Tee branch single (equal or unequal) ordinary or inverted (spigot or socket type of or with paralled branches with oval access door all as specified and directed.

All as per item No 68 but without oval access door

S&F in repairs 100mm dia CI bends (any radious) diminishing pieces or tapers (larger bore shall be measured) with oval access door all as specified and directed.

S&F 100mm cast iron cowl all as specified and directed.

M&L two coats of synthetic enamel paint over a coat of pink primer including prepration of newly wooden surfaces of girth exc 10cm all as specified and directed.

M&L two coats of synthetic enamel paint over a red oxide primer including prepration of newly treated steel surfaces of girth exc 10cm all as specified and directed.

Dismantling of existing water tanks (PVC/RCC/AC) exc 250 ltr but n.exc 500 ltr capacity and removing from site complete all as specified and as directed.

S&F 500 ltr capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top three layer) hoisted and fixed in position incl 20mm dia bore ball valve PTMT high pressure with polythene float and fly nut complete all as specified and directed.

M&L for PCC 1:3:6 type C2, using 40mm graded stone aggrgates as in platform to PVC water tanks all as specified and directed.

M&L cement concrete 1:2:4 mix type B-O (12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and fair (without using extra cement) all as specified of average thickness 30mm in slope 1:40 over roof all as specified and directed.

M&L for 10mm thick plastering in CM(1:3) on concrete roof surfaces with water proofing compound @ 3% by weight of cement and finishing the surface even and fair without using extra cement including taking down existing plaster and APP membrane all as specified and directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing compound ISI Marked all as specified and directed.

M&L for 3mm thick APP modified polymeric membrane with non-woven polyester reinforcement shall be laid by torch application method over primed surface of roof slab.

M&L 75mm Cement concrete type C-1, 1:3:6 (100mm graded aggregate) all as specified and directed

M&L for Chequered cement concrete tiles, rubber moulded 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement with pigment in floors over 15mm thick screed bed in CM (1:6) all as specified and as directed.

M&L for PCC type B-0 1:2:4 using 12.5mm graded stone aggregate for filling between road & kerb stone all as specified and directed

S&F SS peg set of 5 size 300x25 & 2mm thick all as specified and directed

M&L 18/20mm thick any shade marble (Green marble) slab in cooking platform in CM1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade15 mm thick screed bed in CM 1:6 completed all as specified

S&F 150mm size single action spring hinges, mild steel with steel wire spring, stove enamelled, black all as specified & directed

S&F in repair anodised aluminium alloy Harrison rails,mild steel, chromium plated with fixing brackets, stops, rollers etc all as specified & directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil all as specified & directed

Removing excavated material (Soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified & directed

Returning , filling in including in spreading , leveling, watering and well raamming in layers.n exc 25 cm all as specified & directed

M&L Cement concrete 1:3:6 type C-2 Concrete bed to drain pipes (150mm) including packing under, and haunching against the sides of pipes after they are laid and tested; in all as specified & directed

M&L 150mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars including connecting to existing main holes all as specified & directed

Dismantling floor hearth or wall tiling including cement mortar bedding ( including backing) , removing serviceable tiles to store and rubish of the premisses.

M&L for raised pointing mason's joint as per Fig-05 of section-14 of SSR-Part-I-2009 to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of weathercoat on wall surface over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Apex paint on wall surface over a coat of apex primer complete all as specified and directed.

S&F modular Kitchen cabinet in required sizes at site made out of 18mm thick one side decorative teak face finish sheet consisting of carcass 18mm thick PVC sheet & providing of shutters made out of 18mm thick one side teak face finish PVC sheet all required brackets 5.5 screws etc . The panels shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed by Engineer-in-Charge. Note. : Quoted rate deemed to included the cost of all necessary fitting. Measurement will be given for front face. Quoted rate deemed to included the cost of side, back and bottom panled.

S&F SOSS hinges of size 13mm x 45mm (invisible hinges) for kitchen cabinet shutter

S&F of 18/19 mm thick PVC board exterior grade prelamineted both side and decoretive choice fixed for kitchen cup board and shelve complete.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2.4 (or) 6 raised panel design with 2mm thick 3D with wood free EPS moulded PVC sheet polyurethen painted on the front face and 2mm plain colur PVC sheet on back face with particle board core etc colour as approved by GE complete all specified & as directed

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike, plate etc complete as specified size of frame 165 X 60 mm

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike, plate etc complete as specified size of frame 105 X 60 mm

M&L PCC (1:2:4) type B-0 using 12.5 mm aggregate in filling pressed steel frame concrete shall be compressed all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type both sides (ISI marked) all with 6 mm thick teak wood edging all round.

S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded. Note:- Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.

S&F factory made box type windows (steel) (BWM) with side hung shutter with coolar opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded. Note. : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.

S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete without glazing bars, dovetailed or welded. Note. . Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.

S&F factory made box type ventilators (steel) (SFV) with side hung shutters as shown in Drg No CEJZ/TD/24 sheet1/3 to 3/3incl hinges, steel peg stay complete all as per IS. Note. Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.

S&F stainless steel railing of grade S-304 including polishing complete all as specified and directed.

S&F stainless steel dome 50mm dia

S&F stainless steel cap 40mm dia

M & L Green Marble work 15-16mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and laid over cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade Note: Quoted rate deemed to including the cost of chamfering the exposed edges of marble.

M & L White Marble work 15-16mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and laid over cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade Note: Quoted rate deemed to including the cost of chamfering the exposed edges of marble.

All as per item No 56 but 5mm dia and over upto and incl 10mm dia in stirrups spacers and binders.

S&F 40 mm thick sand stone slabs of minimum length 60-75cm, machine cut on face and along exposed edges, self faced on other side and set in CM 1:4 over 75 mm thick PCC 1:4:8 for plinth protection, shall be laid to slope 1 in 30.

M&L for preparing small articles such as stop, covers, gully gratings, holdfasts, ends of posts, back of chowkats, etc. of wood and wood based materials, steel and iron work, new or old, of any description, and treating with tar or coal tar black paint, area tarred n. exc. 0.1 sqm each.

Removing of existing filling in sunken floor of WC and repair to sunken floor with 15mm thick plastering in CM 1:3 of internal surface with WPC, than painting with bitumen 30/40 over a coat of bitumen primer, putting 50 micron polythene than filling with PCC 1:5:10 type E-1 using 40mm graded stone aggregate and inserting 50mm bore GI water pipe light grade spout complete all as specified and directed. (NOTE ;-WC & tiles shall be measured and paid separately)

Taking down of existing damaged / loosened cement concrete/ brick tiles from roof / terrace to a depth of average 50 mm including taking down of existing APP membrance if any , cleaning with water and depositing of debris to a distance not exceeding 50m complete all as specified & as directed by Engineer-in-Charge

M&L preparation of plastered surface of roof slab by throughly wire brushing , washed,dried up cleaned all foreign matter and dust and apply one coat of approved bituminous primer @ 0.40 ltr per sqm complete all as specified and directed complete.

M&L for Endura cool roof SRI tiles of size 300x300mm, 10mm thick of, laid over 15mm thick bedding in cement mortar (1:4), joints grouted and flush pointed in cement mortar (1:3) mixed with 5% crude oil by weight of cement.

M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid for separately).

M & L for mild steel framed work as in brackets etc for cooler stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed complete.

S&F for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete.

S&F of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S&F Towel Ring Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)

M&L, PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete for bed to manholes complete all as specified and directed.

M&L, PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in benching to surface channels for manhole or drains etc. including necessary formwork complete all as specified and directed.

M&L precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs of manholes, gully traps etc. set in cement mortar (1:4) complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girty in forms, moulds/stopped ends etc. complete all as specified and directed.

S&F nipple fitted with Bib tap of sink for RO complete all as specified and directed.

Demolition of stone/ brick masonary for making hole in wall for fixing of exhaust fan & supply & fix cement concrete pipe 300mm dia in wall & making food complete all as specified and directed.

S&F fabrication of mild steel guard bars and welded to window fromes all as specified.

S&F 4mm thick frosted glass, pinhead type and glazing with oil putty in squares exc 0.5 sqm in each pane.

S&F 4mm thick pin headed figured glass in small widths as in louvers of ventilator complete all as directed.

M&L galavanised mild steel wire cloth 0.56mm nominal dia of wire and average witdth of aperture not nore than 1.18 mm and fixed with tinned tacks or galavnised wire staples complete all as directed.

Taking down copper/aluminium point wiring surface /concealed (light, fan, socket or power) complete, including fixture and fittings such as switches, bell, ceiling roses, pendants, regulators, sockets, light fitting etc.removing to/of the premises to store and making good disturbed surface of wall floors etc.

Taking down carefully UNSV main switch and DBs including MCBs/MCCB of any size make type and capacity all as directed.

M&L for concealed point wiring suitable for moduler switches complete with multistranded copper conductor 1.5 sqmm size PVC insulated FRLS cable 1100 Volt grade, conforming IS 694 & color code in and including PVC conduit 20mm of wiring good to the existing surface of the wall & touching with the existing color of wall with two coats and making good disturbed surface complete including single core solid conductor copper 1.5 sqmm size solid PVC (FRLS) insulated cable as earth wire and connected to earth dolly drawn in same conduit complete all as specified. a) one light/fan point controlled by one way switch

All as per item No 139 above but one 5 Amp socket outlet on same board

All as per item No 139 above but one 5 Amp socket outlet on independent board

All as per item No 139 above but one bell /buzzer point controlled by one push button on the same board

All as per item No 139 above but one light point controlled by two 2 way switchs.

All as per item No. 139 above here in before but point wiring with 2.5 sqmm single core multistranded copper conductor FRLS insulated and unsheathed cable 1100 volts grade and provn of 2.5 sqmm copper FRLS cable for earth conductor for 15 Amp socket outlet on independent board all as specified and directed.

Material and labour for electric bell AC 230 Volts single phase musical type

Supply and fixing ceiling rose on PVC board size 65X50 mm three terminal complete.

S&F Modular switch 6 Amp 250 V AC one way module

S&F Modular switch 16/20 Amp 250 V AC one way with indicator one module

S&F Modular switch 2 way 6A, 250 V AC 1 module

S&F Modular Socket , 6A-2/3 pin combined with modular switch

S&F Modular Socket 6A/16A-2/3 pin combined with modular switch

Supply and fixing modular fan regulator step type, 120W-2 module as in repair.

Fixing only LED tube light fitting with rod 20/22 watt capacity with all accessories and necessary connection including taking down unserviceable fitting as specified and directed by Eng-in-charge. Note: LED tube light fitting 20/22 watt complete shall be issued under Sch 'B' free for fixing.

Taking down old street light fittings including bracket and fixing only LED security light of capacity 25/30 watt with necessary connection incl light grade GI pipe of suitable size of bore dia, clamps, nuts and bolts all directed by Engr-in-charge. Note: LED security light fitting 25/30 watt complete shall be issued under Sch 'B' free for fixing.

Fixing only in replpacement LED luminaire comprises of co-extruded housing pre-wired of capacity 9/10 W, IP 20 class I protection, colour temperature 5700K, complete with all accessories and necessary connection and specified and directed by Engr-in-charge. Note: LED luminare fitting 9/10 watt complete shall be issued under Sch 'B' free for fixing.

Supply and Fixing in replacement high quality aluminium extruded with decorated end caps 10 watt length 535x22mm Make Jaguar/Havells/Bajaj

Fixing only ceiling fan 1200mm sweep without electronic regulator complete including taking down existing ceiling fan and depositing to MES store yard. Note:- Ceiling fan 1200mm sweep complete shall be issued under Sch 'B' free for fixing.

Fixing only metal body exhaust fan 250mm sweep complete. Note:- Exhaust Fan 250mm sweep shall be issued under Sch 'B' free for fixing.

Supply and fix AC three phase energy meter of accuracy class 1.0, 3x240V, 50 Hz with Black lit LCD Display of rating 10-60A(Measures & display KWH,V,I,KW,PF. Last month history of KWH & MD in KW) with special features like TOD, Tamper logging, optical communication port and display in absence of power of Make: HPL Cat No-TPPB152113000ME01 or equivalent in L&T and all as directed at site including taking down existing meter and depositing to MES store yard

M&L for Sub main wiring with PVC insulated unsheathed 2x6 sqmm single core multi stranded copper conductor cable passing through and in incl FRLS conduit open/concealed as per site requirement, making good the disturbed surface with and incl 1x6sqmm single core copper conductor FRLS cable PVC insulated and unsheathed as earth wire including taking down unserviceable. Note : Three run of 6 Sqmm cable including one run of PVC conduit will be measured as one length

Supply, fixing, connecting & testing sheet metal enclosures double door, TPN, 4 way 415 V, DBs for using MCBs/MCB isolators with having alluminium bus bars suitable for 200 Amps rating with IP-42 protection complete all as specified and directed Note : Rates are deemed to be included for flushing in wall concealed complete making good and matching existing surface.

Suply and fixing connecting and testing sheet metal enclosure double door single pole neutral , 08 way DB's for using MCBs/MCB isolator with having alluminium bus bar suitable for 200 Amps rating with IP-42 protection complete including taking down existiing all as specified and directed Note: Rates are deemed to be included for flushing in wall concealed complete making good and matching existing surface.

Taking out old earthing and Supply and fixing in repair for Earthing complete with GI Steel earth plate eletrode 60 cm X 60 cm X 6.0 mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below ground level, connected to GI iron or steel earth wire 4 mm dia (8 SWG) by means of nuts , bolts checks nuts and washers made of GI iron or steel earth wire protected by GI iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C-1, pre cast RCC cover slab 30cmX30cmX10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges, necessary excavation and earth work in any type of soil complete all as shown electrical plate No 3 of MES schedule part-I and testing after completion.(cost of GI wire upto 7.50mtr shall be deemed included in the unite rate quoted)

Supply and fixing MCB SP 6-30 Amp 240 Volts 10 KA 'C' series.

Supply and fixing MCB SPN, 16/32/40 Amp, 240 Volts 10 KA 'C' series.

Supply and fixing MCB TPN, 63 Amps, 415 Volts 10 KA 'C' series

Taking down ceiling fan from hook, dismantling and opening the same and oiling , greasing etc including replacement of minor parts as split pin,rubbr reel, capacitor connection wire, screws, washer, and refixing the fan in position all as directed and testing including one coat of spray painiting, wirtting of MES Number complete

Supply and laying 40 to 50 mm thick roughly hammer dressed Jodhpur stone slab cover 25 cm to 30 cm wide and not less than 60 cm long dry laid aboutting each other with gap between adjacent slabs not exceeding 10 mm for underground cable for protection including taking down old cable protection cover

M & L for Tibba sand fillling in treanches for cable cushioning with clean dry fine sand unwashed locally available including gently punning around cable complete all as specified and directed (Note: Punned thickness of sand will be measured and paid)

M&L for GI pipe light grade of 50 mm bore with necessary fittings laying in treanches, floors, fixed to wall/poles all as reqd at site and all as directed by the Engr-in-charge.

Supply and laying , testing , joining and commissioning XLPE/PVC insulated armoured heavy duty electric under ground cable with alluminium conductor 1100 volts grade of size 25 sqmm 3.5/4 core laid in trenches/fixed to wall or Feeder Pillor including incoming and outgoing connection with proper size of lugs and glands complete all as specified and directed.

Fixing only wall storage type electric water heater vertical type 25 litres having 5 star rating as per BEE, including fastner nut and bolts, and making connection, complete all as specified and directed by Engr-in-charge. Note: 25 Ltr storage type electric water heater shall be issued under Sch 'B' free for fixing.

M&L for point wiring commplete with 4sqmm single core multistranded copper conductor PVC(FRLS) insulated and unsheathed cable 1100V grade fixed on and including PVC conduit 20mm size fixed on wall , surfaces, ceiling etc for existing MCB enclouser/socket board with 4sqmm single core multistranded copper conductor PVC(FRLS) insulated and unsheathed cable as earth continuity conductor to earth and earth dolly (for AC/Geyser point)

Fixing only bulk head luminer low LED. Bluk head LED 10 watt. Note bluk head fitting 10 watt LED shall be issued under Sch 'B' free for fixing.

Supply and fixing metal flush box made up of GI sheet with earth terminal for safety 1/2 modular

Supply and fixing metal flush box made up of GI sheet with earth terminal for safety 3 modular

Supply and fixing metal flush box made up of GI sheet with earth terminal for safety 4 modular

Supply and fixing metal flush box made up of GI sheet with earth terminal for safety 6 modular

M & L for modular plate with supreme frame white in color a) 01/2 Modular

All as per item No 179 above but 03 Modular

All as per item No 179 above but 04 Modular

All as per item No 179 above but 06 Modular

Supply and fixing modular TV socket all as specified and directed by Engr-in-charge

Pioneer Enterprises

S.G.ENGINEERING COMPANY

M/s. Dhananjay Construction