Providing pavers pathway, play equipments, Solar fencing, Generator and lighting to Collector Bungalow at SV University, Tirupati

Earthwork excavation for foundations as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 mtrs, dressing of sides etc., complete up to 3mts depth in ordinary soils

Filling with sand (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.

Plain Cement Concrete (1:2:4) (M15) using 20mm & 10mm HBG machine crushed metal from approved quarry including curing, cost and conveyance of all materials , using concrete mixer and labour charges , necessry lift and centering charges etc., complete as per standard specifications and as directed during execution by the departmental officer for steps

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work.

Masonry Work in CM (1:6) Prop with Flyash Cement Solid Blocks of size 290X200X140mm for manufacturing of Flyash Solid Blocks using Flyash of 50KGs/ Sqm, Cement of 15 KGs, Gypsum of 5 Kgs and Stone Dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., complete with a compresive strength not less than 75KG/ Sqm for Walls for Walls

Plastering in CM (1:4) 20 mm thick using best river sand from approved source including cost and conveyance of all materials, scaffolding, labour charges, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete., FOR out SIDE

Painting to new walls with 2 coats ( total 3 coats )of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for External Walls

Supply and fixing of C.C. Kerb not less than M30 strength of size 600(length as directed by the department) X 450 X 110 mm thick with bottom thickness of 110 mm up to height of 400 mm and top width of 50 mm thick chamfering with 45° at starts at 400 mm height to 450 mm height as selected by the Engineer-in-charge from approved source/ factory which is laid on existing CC Bed in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including cost and conveyance of all materials & labour charges including transportation charges from approved source, loading & unloading charges to site of work and internal transportation at site including contractor profit & overhead charges complete for finished item of work.

Providing and laying of interlocking concrete block pavements using CC M 35 having thickness 60mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification of approved shade design with colour pigmentation on top with imported colours etc., laid over a sand bed of 50mm thick using 12mm& down size HBG crushed metal for manufacture of blocks - approved by the department and of approved size & shape of dumbell, zigzag, I-block or any other shape approved by the department., over sand bed of 50 mm average thickness and compacting with vibrating plate compactor having 3 tone compaction force there by forcing part of sand underneath to come up in between joints. final compaction of paver surface to be done after spreading and brushing the fine sand into joints to its final level. The work includes cost of all materials such as cobble stone. inter lock pavers, sand etc., Labour and equipments such as cutting machine, lift, loading & unloading to work site clearing, bringing required for the successful completion of work as per drawings and Technical Specification Clause 1504 MORD and as directed during execution (RBR-CCPV-13-II) P.No: 421

Supply, Delivery and Commissioning of Arch Zig Zag Model Swing 3.0 Mtr x 1.25 Mtr x 2.6 Mtr.(L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Sea Saw 2.4 Mtr X 0.5 Mtr x 0.5 Mtr (L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Sea Saw Seat :- Seats are made from best quality F.R.P. material with thickness of 5mm in attractive colours. Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Deluxe Slide 1.5 Meter Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Animla Spring Rider 0.9Mtr x 0.5 Mtr x 0.80 Mtr.(L x W x H) - Roto Model Metal:- All pipes make should be Tata or Jindal.All pipes should be of "medium grade" as per IS1239 are galvanized and zincdipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 micronsfollwed by powder coating to the thickness of 80-120 microns. Powder and Primershould be of Ackzonobel make.Safety & Maintenance:-All products of equipmentshould be tested as per EN1176 safety norms and ce certification must.Maintanance should be followed as per EN 1176 guidelines. The equipmentshould be withstand for the weight of user more than 100Kg.Hardwares :- AllNuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work.

Supply, Delivery and Commissioning of Toy Spring Rider 0.9Mtr x 0.5 Mtr x 0.80 Mtr.(L x W x H) - Roto Model Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply and delivery of Solar Fencing 9-11 Lines 1 Inch square pipe 25x25x1.6mm Galvanised with 1.5 Inch Insolators. 45x45x1.6 mm Corner pole , 2.59mm Galvanised Systemaric wire GI support Poles - Mid, Corner & Support Poles . GI Tension wire for lining . Polyner Insulator , GI Tighter , DI Cables , S Hooks & Necessary accessories. , complete as per Engineer in charge.

Supply and delivery of Solar Fencing 12KV 60AH 40 Watt Panel. , complete as per Engineer in charge.

Providing fabrication and civil work for fixing of solar fencing poles with core cutting at regular intervals . Complete as per specification and as per Engineer in charge.

Hire charges for JCB towards including removal and disposal of unseviceable material , etc., complete and as directed during excution by the departmental officers.(for cleaning , levelling and removing of gravel in garden area etc.,)

Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template. Makes: Bajaj / Valmont /Laasma/ Transrail/ Utkarsh/ Skipper /Consoul/ Surya/ Vakrangee/ Lysaght Pole /Hakke

Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete.

Fabrication, Transportation and supply of 1.0 mtrs sword type or any decorative Double arm bracket with dooms either side complete with all accessories with MS galvanized 40mm / 50mm dia Pipe. (The design should be approved from field Engineers) Makes: Bajaj / Valmont/ Laasma/ Transrail/Utkarsh/ Skipper/ Consoul/ Surya/Vakrangee/Lysaght Pole /Hakke

Supply and transportation of 90W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass / temperature protective polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >= 120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm /channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Supply and transportation of 10 SqmmX 4 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel / Fortune Art

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete.

Supply Laying and Transportation of Outer dia 50mm and inner dia 38mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make : DURA LINE (Dura Guard) or its equivalent make.

Laying of U.G cables upto 50 Sq,mm and back filling of trench including labour charges etc., complete.

Supply and fixing of 6 to 32 Amps range Single pole MCBs 'C'/ 'D' Curve as per IS:8828 - 1996 / IEC:60898 - 2002 ISI mark of 'C' series 10 KA breaking capacity in the existing board and giving necessary connections. Grade-A: Makes: Legrand-DX3 / Schneider-Acti9 / Hager-h3 / Siemens-5SX4 / Havells STADx / L&T-AU / Indo Asian-Opti pro / HPL (Techno)

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply of 3 core 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990.

Supply and transportation of 8 Watt LED Luminaire made of extruded aluminium alloy (grade 6063) with die-cast aluminium components and non corrosive SS fasteners. Re ector system made of die-cast aluminium. Non yellowing UV stabilized polycarbonate translucent diffuser.Silicone gasket Cast Iron mounting plate with an anchorage unit made out ofhot dip galvanised steel for extra guarantee against corrosion..Luminaire can be aligned on the mounting plate around 360°.Cable entries for through-wiring of mains supply cable.Protection class IP 54Conformity mark Suitable for operation on 240V, 50Hz single phase ac supply 8W LED Symmetrical CCT: 3000K Dimension: Ø194 x 1020Mounting: M2Product Finish: Graphite GreyIP: 65 IK: 08KP-69331 - Foundation Bolt - 2 Nos of M8 Foundation J Bolt Length 150mm, 2 Nos of (Spring Washers, Plain Washers and Nuts) for each Bolt. Suitable for Residential & Public areas for Illuminating Driveways,Pathways, Flowerbeds, Entrances, Squares, Gardens and as well as landscape architecture. Make and Model:KL-24680-30-PCF-004-000-008-102-003 Mexican Maya Bollard - Pyro Top /equilant

Lighting Pole 4.m, Height (in mm): 4000 Pole Size: Ø88.9/Ø139.7, PoleType: P11, Arms: -No Bracket-No Arm, PF: Graphite Grey,Anthracite Grey,Black,KP-69325-69204 Foundation, Bolt 4 Nos of M16 Foundation J, Bolt Length 300mm, 2 Nos of (Spring Washers, Plain Washers and Nuts) for each Bolt KP-12028-PCF-014-400-003-NAG00-NA-L0414-4327 Florian/ equilant.

KL-24932 Magudam Midi 30W LED CCT: 2700K, 3000K, 4000K, 5700KDimension: Ø367 x 647Mounting: D1Product Finish: RAL 7016 Anthracite Grey, Graphite Grey, RAL 9004 Black, RAL 9007 Grey Aluminium, RAL 9016 Traffic White, Copper, Anthracite Grey&Gold, Graphite Grey & Gold, RAL 9004 Black & Gold, RAL 9007 Grey Aluminium & Gold, RAL 9016 Traffic White & Gold, Antique Gold ClassyIP: 65 K-Lite KL-24932/Equilant

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and fixing of 63 Amp DP Isolator as per IEC:60947 Part-III in the existing board and giving necessary connections. Makes: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Havells STADx/L&T-AU/Indo Asian-Opti pro/HPL(Techno)

Supply, laying and jointing of the following sizes UPVC Pipes for potable water supplies conforming to IS ;4985/2009 (3rd rivision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/Any other colour (except white) including necessary fittings, all labour charges etc., complete for the following sizes of dia Labour Charges for Laying, Fixing and Commissionering the UPVC Pipes including couplers/ bends/ tees etc., any diameter including fixing necessary fittings like bends, plugs, couplers, junction, tees, etc., with solvent jointing as per standard practice etc., complete

CPCB IV: Supply Installation Testing And commissioning of CPCB IV+ DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator 1. 1500 RPM, 1P or 3P, Brushless type, screen protected, revolving field, Self-excited alternator conforming to IS/IEC 60034-1 IP23, with standard Alternator Protection (over voltage, over speed & Under voltage) 2. A reliable long life with superior class 'H' insulation with temperature rise to Class H Diesel Engine: Engine: Engine should comprise of Silencer, Electronic governor from >25 KVA & above, suitable rating battery , Battery charging alternator, battery charger , Inbuilt Fuel tank with fuel pipe, AVM pads , Control panel with 3P MCCB of suitable rating with short circuit protections (25kA,36kA, 50kA) with microprocessor basedcontroller indicating genset parameters ( i.e. volt,amps, KWH, KVAR, Hrs etc.), The diesel engine shall be capable of providing 10% overload for 1 Hrfor every 11 Hrs of continuous running at full load.The DG set shall be supplied as per OEMspecifications and shall be tested at site along withbelow. 1. CRDI Engine >25 KVA DG set 2. Water cooled Radiator coupled to engine 3. Dry type air cleaner with service indicator 4. First fill of lube oil, Coolant & first fill of Diesel 5. Electrical starter motor with soft start System 6. Battery charging alternator 7. Remote Monitor system >58.5 KVA & Above 8. 2 years / 5000 Hrs Warranty from commissioning or 30-month form supply. 9. Emission control system - EGR & (DOC, SCR for >75 KVA DG set) 10.10 Mtrs Exhaust pipe from Silencer Genset Controller: 1. Microprocessor based genset monitoring, metering and control system with full graphics LCD display for easy front panel access. 2. AMF relay, manual and remote start / stop modes for 1-ph & 3-ph gensets 3. Backlit and full graphics display with power saving feature 4. Engine parameter monitoring -Lube oil pressure, Engine coolant temperature, Fuel level, Battery voltage, Engine running hours 5. AC Alternator parameter monitoring -Voltage L-N & L_L, Current, kW, kVA (Phase & Total), Frequency, kWH, PF 6. Genset Protection: Engine: Low lube oil pressure, High coolant temperature, Battery High/Low Volts, Fail to Start, Sensor failure, Low fuel level, Overspeed AC Alternator: Over/Under Voltage, Over/Under, Frequency, Loss of AC sensing, Over frequency, Over Current, kW Overload, Unbalancing load 7. Maintenance notification based on Engine Run Hour & due date 8.Communication: USB port, RS485, CAN 9.30-50 Event logs(58.5kVA at 0.8 pf 415V 50Hz 3-Ø)Acoustic Enclosure: 1. Specially designed to meet stringent MOEF/CPCB IV+ norms 2. Weatherproof, powder coated Acoustic enclosure for DG set for sound attenuation fabricated from 1.2 mm / 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.2mm /1.6 mm CRCA sheet and filled with PU Foam/Rockwood for Fire retardant acoustic and for better safety 3. Designed to operate in extreme climatic conditions in temperatures ranging from -10 deg to 55 deg without any external aid 4. Fabricated base frame with AVM pads. 5. Noise level is less than 75 db (A) at a distance of 1 Mtrs as per CPCB norms, complete in all respect. following capacity:

Supply Installation Testing and Commissioning of AUTO MAINS FAILURE (AMF) Panel with IP 52 protection, fabricated from CRCA sheet steel 2mmThick , Powder coated finish , Engine START & STOP commands, control RELAYS, selector switches for Ammeter & Voltmeter, Ammeter & Voltmeter ,4pole MCCBs for EB Supply and DG Supply of required rating and breaking capacity, automatic batterycharger(External charger for DG) Control & Power Contactors, Timers,Electronic Hooter ,Visual & Alarm indication for faults, UPS, operatorinterface panel complete in all respect suitable for following capacity DG sets:

PROVIDING OF INDEPENDENT CHEMICAL EARTHING AFTER EXCAVATING AN EARTH PIT. THE EARTH ELECTRODES, 50MM DIA, WALL THICKNESS, 3.25MM, 3 MTR LONG GALVANIZED GI PIPE, STRIP IN PIPE SYSTEM FITTED WITH 40X6X3100MM GI STRIP FROM TOP TO BOTTOM, TERMINAL HOLE OF 12MM, PIPE FILLED WITH CONDUCTIVE CRYSTALLINE COMPOUND ,INCLUDING 2 BAG OF EARTH LIFE COMPOUND ( 25 KGS EACH ) AS PER IS 3043. with earth inspection chamber of dimensions: Width :320 mm x 320 mm, Height: 192 mm, Weight: 30 Kgs, Load bearing capacity: 5000 Kgs including drilling of bore in any kind of soil.

PROVIDING OF INDEPENDENT CHEMICAL EARTHING AFTER EXCAVATING AN EARTH PIT. THE EARTH ELECTRODES, 50MM DIA, WALL THICKNESS, 3.25MM, 3 MTR LONG COPPER BONDED (250 MICRONS) MS PIPE, STRIP IN PIPE SYSTEM FITTED WITH 40X6X3100MM COPPER BONDED STRIP FROM TOP TO BOTTOM, TERMINAL HOLE OF 12MM, PIPE FILLED WITH CONDUCTIVE CRYSTALLINE COMPOUND, INCLUDING 2 BAG OF EARTH LIFE COMPOUND (25 KGS EACH) AS PER IS 3043. with earth inspection chamber of dimensions: Width: 320 mm x 320 mm, Height: 192 mm, Weight: 30 Kgs, Load bearing capacity: 5000 Kgs including drilling of bore in any kind of soil.

Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, riveting, soldering, saddles, making connection etc as required 25mm x 3mm Copper Flat (0.663Kgs/1Mtr)

Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, riveting, soldering, saddles, making connection etc as required 25mm x 3mm GI Flat (0.656 Kgs/Mtr)

Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, riveting, soldering, saddles, making connection etc as required 8 SWG GI wire(0.104Kgs/1Mtr)

Supply and transportation of following XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: As per list of recommended brands as category I 95 Sq mm X 3.5 core

Supply and Transportation of XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc., complete. Makes: As per list of recommended brands. 4C x 4 sq.mm