REPAIR REPLACEMENT OF JOINERY BUILT IN FURNITURE PLUMBING AND SANITARY FITTINGS PLASTERING FLOORING AND ALLIED WORKS AT ORA UNDER AGE BR I AT INA EZHIMALA

Amount

Notes :- 1. The Scope of subject work is to repair and rectify all day to day complaints/ misc maintainence works in scattered ORA area. The sites will be made availabe to the contractor as per the complaints received/ repair works required during the currency of work. Hence, sites will be handed over according to complaints received/ repair works required. 2. The Contractor is required to attend all the complaints despite of number of complaints given on each day for the entire duration of contract. Contractor or his authorised person is required to collect the day to day complaints from MES complaint cell and submit the same to MES after completion of the complaints duly signed by User. The rates quoted will be inclusive of all conveyance required for collecting complaints and all works specified in schedule. 3. All critical complaints related to water supply and complaints which posses safety hazards to occupants has to be rectified within 24 hours of receipt of complaints. Incase the complaints are not rectified within due time, contractor shall submit in writting to Engr In Charge the valid reasons/justifications for the delay in rectifying such critical complaints within 02 days. Otherwise a recovery of Rs 500 per complaint shall be recovered from the contractor. 4. All unserviceable items/debris etc shall be disposed off outside INA area, contractor shall arrange suitable dumping yard/area at his own cost and no extra payement shall be made for the same. Recovery of Rs 5000/Per load will be levied if debris/unserviceable items are found dumped inside INA area

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed by the Engineer in Charge.

Material and labour for Glazed ceramic coloured tiles in patches 300x200x7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in cement mortar 1:4 complete all as specified and as directed by the Engineer in Charge.

Material and labour for Glazed ceramic coloured tiles 350x250x7mm /450x350x7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in cement mortar 1:4 complete all as specified and as directed by the Engineer in Charge.

Material and labour for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by the Engineer in Charge.

Material and labour for machine cut granite stone slab 20mm thick of approved colour and shade as in floors, kitchen platform, steps and other similar situations over and including 15mm thick backing coat in cement mortar 1:4 laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and as directed by the Engineer in Charge.

Rounding to edges of stone slabs to one edge, such as in kitchen platform, steps and other similar situations complete all as specified and as directed by the Engineer in Charge.

Cutting of granite stone for fixing kitchen sink complete all as specified and as directed by the Engineer in Charge.

Demolition of Concrete in ground floors and pavings exc 15 cm thickness above ground level) all as specified and as directed by the Engineer in Charge.

Material and labour for Cement concrete in foundations, filling and mass concrete Type B2 1:2:4 (using 40 mm graded stone aggregate) in sunken floors complete all as specified and as directed by the Engineer in Charge.

Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application in sunken slabs complete all as specified and as directed by the Engineer in Charge.

Supplky anf fix in repairs Matte finish stainless steel kitchen sink bowl type of any size complete all as specified and as directed by the Engineer in Charge.

Taking down cement plaster of any description on brick wall, ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by the Engineer in Charge.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces - Cement plaster 1:6 to be finished even and smooth without using extra cement complete all as specified and as directed by the Engineer in Charge.

Dismantling of structural steel work including doors etc. all as specified and as directed by the Engineer in Charge.

Supply and fix Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by the Engineer in Charge.

Material and labour for preparation of new steel surfaces of any description over 10 cm in width or girth and painting with two coats of Aluminium paint over a coat of aluminium red oxide primer complete all as specified and as directed by the Engineer in Charge.

Material and labour for preparation of new steel surfaces of any description over 10 cm in width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by the Engineer in Charge.

Taking down chowkats or frames not exc. 1.5 Sqm each but without taking off shutters from the frames all as specified and as directed by the Engineer in Charge..

Taking down chowkats or frames exc. 1.5 Sqm but n.exc 4 Sqm each but without taking off shutters from the frames all as specified and as directed by the Engineer in Charge.

Supply and fix powder coated aluminium frame for doors, windows, ventilators, partitions,kitchen cupboars frame etc with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed by the Engineer in Charge.

Supply and fix Powder coated aluminium door shutters, aluminium sectionof size 85 x 44.45 mm as frames incl necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beaking screws etc complete all as specified and as directed by the Engineer in Charge.

Supply and fix Powder coated aluminium window and ventilator shutters fixed or sliding type without sash bar, aluminium section weighing 0.55 kg/m incl necessary joining cleats rubber packing anodised aluminium snap beading screws etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed by the Engineer in Charge.

Supply and fix Aluminium expanded metal mesh 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete all as specified and as directed by the Engineer in Charge.

Supply and fix Aluminium composite panel 4 mm thick of approved colour and shade fixed with self tapping screws on aluminium frame work in suitable shape and size complete all as specified and as directed by the Engineer in Charge. Note: Supply and fix aluminium frame work if required shall be measured and paid seperately

Taking down shutter of any description (wooden/Aluminim/steel ) exc. 1 Sqm and n. exc 2 Sqm each complete all as specified and as directed by the Engineer in Charge.

Taking down shutter of any description(wooden/Aluminium/steel ) exc 2 Sqm each complete all as specified and as directed by the Engineer in Charge.

Supply and fix 24 mm thick factory made PVC door shutters to existing door frames made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and jointed at the corners by means of M.S. galvanized/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer- in-charge. (For W.C. and bathroom door shutter)

Material and labour for second class soft wood, 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face is covered with deco rative face veneer with lipping/frame to match supplied and fitted to chowkats complete all as specified and as directed by the Engineer in Charge.

Supply only 100mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repairs 150 mm anodised aluminium handles cast type complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repairs 125 mm Aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repairs 200 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed by the Engineer in Charge.

Supply only 125 mm mild steel butt hinges, cold rolled medium weight all as specified.

Supply and fix in repairs 300 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repairs floor door stopper 150 mm size aluminium alloy body and tongue double legged, anodised fixed to door complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair mild steel friction hinges suitable for window/ventilator shutters complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair 75 mm brass handles, cast type, polished, ornamental type for drawers, etc. complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repairs 150 mm brass handles, cast type, polished, ornamental type for cupboards complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair aluminium powder coated Ebco handles for sliding windows complete fixed all as per manufacturers instruction and all as specified and as directed by the Engineer in Charge.

Supply and fix in repair 75 mm hasp and staple mild steel safety type and fixed with screws complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beadingcomplete all as specified and as directed by the Engineer in Charge.

Supply and fix in repairs rubber beading suitable size for safety purpose (snake guard) in bottom of door ccomplete all as specified and as directed by the Engineer in Charge.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed by the Engineer in Charge.

Supply and fix 18-20 mm thick extruded polymer profile form board made of ‘U’ Pvc polyester resin of any colour and pattern used as in kitchen cabinets/ wardrobes/ Shutters/drawers etc fixed with screws in required size and shape complete all as specified and as directed by the Engineer in Charge. Make : Greenply/Thomson multiwood/M/s RajashriPlastiwood indore, M/s Sintex Industries Ltd Note : Necessary fittings will be measured and paid separately under relevant items

Supply and fix medium density fibre board exterior grade 18/19 mm thick as in cupboard, drawer repair & fixed with screws to timber frame work complete all as specified and as directed by the Engineer in Charge.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and painting with two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer in Charge.

Material and labour for 1.00 mm thick glossy finish Acrylic laminate of surface finish, colour and pattern as approved, fixed with approved adhesive for fixing over polymer profile foam board (Multiwood) as per manufacturer's instructions complete all as specified and as directed by the Engineer in Charge.

Supply and fix 450 mm long stainless steel telescopic drawer channel double ball bearing complete fixed all as per manufacturers instructions and all as specified and as directed by the Engineer in Charge.(Make : Sleek by Asian paints or equivalent)

Supply and fix stainless steel soft closing hydraullic hinges for shutter complete all as specified and as directed.(Make : Sleek by Asian paints or equivalent)

Supply and fix 125 mm stainless steel handles, cast type, polished for cupboard shutters etc. complete all as specified and as directed.(Make : Sleek by Asian paints or equivalent)

Hacking out old broken glass (any thickness, size, quality or description) form metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by the Engineer in Charge.

Supply and fix sheet glass 4mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed by the Engineer in Charge.

Material and labour for 4mm thick sheet figured glass pin headed quality exc 0.50 sqm in each pane and glazing with aluminium beading complete all as specified and as directed by the Engineer in Charge.

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing the same after carrying out repair including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by the Engineer in Charge.

Repairs to wooden shutter of any description exc 1 Sqm but n exc 2 Sqm each including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by the Engineer in Charge.

Taking down existing aluminium glazed window shutters of any description for repairing and refixing in the same opening after carrying out repair works all as specified and as directed by the Engineer in Charge. Note :- New materials required for replacement of old items shall be measured and paid seperately vide relevant items.

Supply and fix in repair Mortice lock brass body, 100mm, 4 levers vertical type complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair 20 mm bore curtain rods, anodised aluminium alloy, PVC coated with fixing brackets, stops, rollers etc complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair aluminum (die cast) body door closer hydraulically regulated designation No. 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair vitreous china, wash down water closet (EWC) white colour with PVC seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair plastic water closet seat cover white colour closed pattern with flat bottom and cover and MSCP or aluminised hinging device complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair vitreous China wash basin, white coloured, flat back 550x400mm including waste coupling CP, fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair PVC valve less syphonic action type flushing cistern low level with inlet ball valve float and handle including brackets 10 ltrs capacity complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair 15mm bore chromium plated bib taps (fancy type), long body cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed for iron pipes complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair 15mm bore chromium plated bib taps all as specified. Jaquar Cat No KUP35037PM or equivalent complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair 15mm dia bore pillar taps, cast copper alloy, fancy type capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair 15mm dia bore pillar taps, chromium plated all as specified.Jaquar Cat No KUP35001PM or equivalent complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair 15mm bore stop valves chromium plated cast copper alloy, fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes (concealed type) complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair angle cock chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete all as specified and as directed by the Engineer in Charge. Jaquar Cat No OPP15053PM or equivalent

Supply and fix in repair cast copper alloy, chromium plated toilet paper holder, complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and as directed by the Engineer in Charge.. Parryware cat no T9805A1 or Equivalent in CERA/Hindware

Supply and fix in repair PVC flexible waste pipe 32/40mm dia and length of 600mm (min) for urinals/WHB/sinkcomplete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair cast copper alloy, chromium plated towel ring all complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair cast copper alloy, brass chromium plated towel rail, 600mm long complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair overhead shower 120 x 120mm size single flow (Face plate Stainless steel and ABS body in chrome finish) with Rubit cleaning system complete all as specified and as directed by the Engineer in Charge. Make: Jaquar Cat No HS 1667 or equivalent

Supply and fix in repair waste coupling, brass, chromium plated with long shank, half thread, 32mm dia, for WHB/urinal etc.complete all as specified and as directed by the Engineer in Charge.

Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by the Engineer in Charge.

Supply and fix for flora centre hole basin mixture including CP extension nipple as required complete all as specified and as directed by the Engineer in Charge. (Hindware F570014 or Equivalent in Jaquar/CERA approved by GE)

Supply and fix 15 mm bore sink cock swan neck (wall mount installation) type with chrome finish complete all as specified and as directed. Jaquar Cat No LYR 383473 or Equivalent in Hindware/CERA approved by GE) .

Supply and fix for Bathroom plastic cabinet of size 0.45 x 0.55 x 0.12 mtr with mirror complete all as specified and as directed by the Engineer in Charge. Make :- Nilkamal, Cello or Equivalent

Supply and fix multi purpose glass corner shelf of size 300 x 300 mm, clear in color with stainles steel wall brackets and two grill bars, approved qualitycomplete all as specified and as directed by the Engineer in Charge.

Supply and fix wall mounted kitchen utensil dish rack, made of stainless steel, weight not less than 5 Kg, size 0.90m x 1.00m (Approx) of approved designe and make complete all as specified and as directed by the Engineer in Charge.

Taking up or down steel tubing and connectors 25-32mm bore in new or old position (wall, ceiling, floor etc.) all as specified and as directed by the Engineer in Charge.

Supplying and laying of 32 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by the Engineer in Charge.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by the Engineer in Charge.

Supply and fix PP-R Gate valves (brass insert) as per requirement of the site for outer dia of pipes 20 mm complete all as specified and as directed by the Engineer in Charge.

Supply and fix PP-R Gate valves (brass insert) as per requirement of the site for outer dia of pipes 25 mm complete all as specified and as directed by the Engineer in Charge.

Supply and fix PP-R Gate valves (brass insert) as per requirement of the site for outer dia of pipes 32 mm complete all as specified and as directed by the Engineer in Charge.

Supply and fix Male Brass Threaded Adaptor (MTA/ MBTA) for CPVC pipe outer dia 20 mm complete all as specified and as directed by the Engineer in Charge.

Supply and fix Male Brass Threaded Adaptor (MTA/ MBTA) for CPVC pipe outer dia 25 mm complete all as specified and as directed by the Engineer in Charge.

Supply and fix Male Brass Threaded Adaptor (MTA/ MBTA) for CPVC pipe outer dia 32 mm complete all as specified and as directed by the Engineer in Charge.

Supply and fix Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC pipe outer dia 20 mm complete all as specified and as directed by the Engineer in Charge.

Supply and fix Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC pipe outer dia 25 mm complete all as specified and as directed by the Engineer in Charge.

Supply and fix Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC pipe outer dia 32 mm complete all as specified and as directed by the Engineer in Charge.

Supply and fix Tank Adaptor for CPVC pipe of outer diametre 32 mm complete all as specified and as directed by the Engineer in Charge.

Supply and fix Tank Adaptor for CPVC pipe of outer diametre 25 mm complete all as specified and as directed by the Engineer in Charge.

Removal of air locks from internal water supply system of pipe of any dia all as specified and as directed by the Engineer in Charge.

Cleaning of water tank exc 250L & n.exc 500L, including cleaning all scales and dirts from inside of tank using bleaching powder and washed with water, complete all as specified including taking down and re-fixing of float valve. Including mentioning date of cleaning on water tank using white synthetic enamel paint as existing complete all as specified and as directed by the Engineer in Charge. Note :- After Cleaning of water tank, The rep of contractor shall be checked during water supply time and ensure water is reaching to the qtr and float valve is working properly and no leakage at joints.

Ditto - all as per item No.100 but exc 500L & n. exc 1000L, complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repairs PVC Lid/ cover for 500L to 1000L Capacity water tank , complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair three layer anti microbial rotational moulded PVC water storage tanks 500 L capacity (cylindrical vertical with threaded type cover and White colour) hoisted and fixed in position all as specified including taking down old broken/cracked water tank and reconnecting the water pipe line in position complete all as specified and as directed by the Engineer in Charge.

All as per item No 103 above but 750L capacity complete all as specified and as directed by the Engineer in Charge.

All as per item No 103 above but 1000 Ltr capacitycomplete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20 mm dia complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 25 mm dia complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 40 mm dia complete all as specified and as directed by the Engineer in Charge.

Demolition of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ any thickness including cover fillets complete all as specified and as directed by the Engineer in Charge.

Supply and fix anodised aluminium snap grid frame work for false ceiling (size of grid 605x605mm) complete all as specified and as directed.

Supply and fix hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed by the Engineer in Charge.

Material and labour for 4mm thick non-asbestos fiber cement building boards fixed or laid/inserted to timber, GI/aluminium framework with screws complete all as specified and as directed by the Engineer in Charge.

Taking down serviceable bib tap, angle cock, stop cock, heath fauset etc and cleaning , servicing ,putting washer etc and refixing on same pipe line complete all as specified and as directed by the Engineer in Charge.

Taking down , repairing & refixing of builders hard ware items like handles, hinges, bolts, towerbolts, sliding bolt etc using necessary screws at the same position complete all as specified and as directed by the Engineer in Charge.

Supply and fix in repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by the Engineer in Charge.

Taking down serviceable wire mesh & refixing the same using nessary beadings, nails etc.complete all as specified and as directed by the Engineer in Charge.

Palace constructions (BID ID -3290874)