Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.3 L+₹5.1 L (21.3%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
6 Jun 2023, 4:00 pmClosed
Executive Engineer,KWA,PH Division, Thrissur
Executive Engineer,KWA,PH Division, Thrissur
AMRUT-Providing FHTC to households in Thrissur Corporation Area - Package IX-Supply installation testing and commissioning two run of 400 sqm aluminium power cable from 1000KVA transformer room to floating panel room at Peechi -General Civil Work
2023_KWA_579119_1
09/EE/PHD/TSR/2023-24
Open Tender
Civil Works - Others
Item Rate
90 days
Peechi
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
₹50,000
20 Jun 2023
30 May 2023
7 Jun 2023
30 May 2023
6 Jun 2023
30 May 2023
30 May 2023 - 6 Jun 2023
Amount
Working Charges
100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.
100.1.2:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth exceeding 1.5m but not exceeding 3m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.
OD265091/2022-2023: Supplying at site 3.5 Core x 400 sq. mm size 1100 V rated, XLPE insulated, Aluminium conductor and steel strip armoured LT power cables as per IS 7098 / Part I 1988 with latest amendments, (Red, Yellow, Blue for phase and Black for neutral) with following specifications : Type - XLPE (Cable code A2XFY), Voltage grade 1000 V, size 3.5 C x 400 sq mm, Conductor - Stranded Aluminium wires conforming to IS 8130 with latest amendments, Insulation - Cross Linked Polyethylene, Inner sheath - Insulating material of vulcanized rubber or Thermoplastic materials, Armour - Flat stell strip, Over sheath - Overall extruded PVC as per IS 5831-1984 with latest amendments, Standards - The cable shall confirm to IS 7098 / Part I 1988 with latest amendments
OD265227/2022-2023:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm
OD265298/2022-2023:Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm
OD265302/2022-2023:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 185 sq. mm and upto 400 sq. m
OD265306/2022-2023:Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
OD265310/2022-2023:Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
OD265344/2022-2023:Structural steel work riveted, bolted or welded in built up sections, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete for providing bridge across the canal and tray for laying cables above it using 50x50x6 mm equal angles for frame work , providing ties using 12mm square steel strips and providing support for cables using 50mm wide steel strips of thickness 12mm,providing clamps including labour charges and cost of materials
OD265902/2022-2023:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 400 sq. mm (82mm)
OD278672/2022-2023:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required for gland earthing of 3.5C x 400 SQMM power Aluminum cable including all labor charges hire of tools etc. complete as per direction of Department officer.
OD266024/2022-2023:Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
OD266132/2022-2023:Alteration in bus bar to accommodate termination of two additional 3.5C x 400SQMM cables (existing 4 runs), which include cutting, jointing, and provide leads/legs for cable termination etc. but excluding cost of cable termination
OD277700/2022-2023:KW(636) SUPPLY OF GI PIPE MEDIUM 100MM
100.12.9:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 100mm diameter nominal bore.
15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
OD277840/2022-2023:Supply and fixing suitable size Support box for 3.5C X 400sqmm cables termination in pannel board to align cables in position including all labour charges and cost of materials , hire charges for tools , Carriage etc ,complete as per direction of departmental officers
16.83:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
16.91.1:Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
Tesla Heavy Electricals Pvt. Ltd.
Bidder Name
Tesla Heavy Electricals Pvt. Ltd.
TONY P THEKKINIYATH
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_855207.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .